Used Screw Manufacturing for sale (42,078)

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: N32469, National double printing press M68, used, year 1974, Djdpfx Aswiuy Rolbscl

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 220287, NS60E Nakashimada double-pressure press from 2022, like new, cutting length 95 mm, wire cutting 7 mm Dodpfx Alswiwqxebecl

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 52 mm, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 8 mm, Flat Die Thread Rolling Machine Ingramatic RP2 V # 408 Year of manufacture: 1984 Output: 200-410 pieces per minute Diameter: 3.5-8 mm Blank length: 6-90 mm Thread length: 52 mm Tool dimensions: 130/115x30x54 Power: 12 kW Dsdpfx Aloy D Na Ujbjcl

Condition: good (used), different versions LxWxH 112x72x117 cm total 460 pcs Dcsdpfxexv S Euj Albol LxWxH 112x72x95 cm total 154 pcs LxWxH 150x94x82 cm total 12 pcs LxWxH 102x62x79 cm total 33 pcs

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 84KB2, Progressive header SACMA SP.240 Fully functional, operational, ready to produce Available for any test Technical information: Number of dies: 3 Heading tonnage: 550 KN Maximum cutoff diam (500N/mm²): 10,5 mm. Max. cutoff length: 85 mm. Kickout stroke die max.: 65 mm. Kickout stroke punch max.: 20 mm. Speed pcs. per minute: 275 Power of main motor: 22,5 KW Diam. dies: 54 mm. Length dies: 90 mm. Dcodpfoy Nx Hbjx Albel Diam. punches: 38 mm. Net weight: 10.600 kg. Gross weight: 12.300 kg. Condition: very good, operational Year: 1990 Ready for immediate delivery Machinery runs without any problems. Available c/o HBR srl - Calolziocorte (LC) Italy

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 48 mm, total length: 75 mm, metric thread diameter (min.): 2 mm, metric thread diameter (max.): 6 mm, Ingramatic RP 1 # 451 1984 230-600 pieces Dcsdpfx Aloy D Nghsbol 2.5–6 mm Blank length: 4–75 mm Thread length: 48 mm Tool dimensions: 95/85x25x48 Power: 12 kW

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Dcjdpjxw Tumofx Albjl Drive motor Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Price on request.

Condition: ready for operation (used), functionality: fully functional, Very well-maintained dual-pressure press DL5 from Heuer Hammer. Immediately ready for operation. Dedpfx Ajxzft Nelbecl

Condition: used, Year of construction: 1992, machine/vehicle number: 77K2, KSP11 SACMA double-pressure press, without thread roller, used, very good condition Dodpfx Alewiwqfjbscl

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use Dcedpfeyy U Shox Albel fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, We offer for sale a screw compressor with an integrated condensation dryer, type Aircraft / Fini A-K-Max 7.5-10-270 K (IE3), manufactured in 2021 by Aircraft. It is manufactured and marked according to CE standards (European conformity). The compressor has been used sparingly and regularly serviced, with documented operating history, including Czech operating and maintenance manuals. Technical parameters: Capacity: 1050 l/min, Maximum pressure: 10 bar, Tank size: 270 l, Dimensions: L: 1200, W: 680, H: 1540 mm, Weight: 280 kg, Electric motor power: 7.5 kW, Voltage: 400 V, Sound pressure level Lp 62 dB. The compressor is in very good technical condition and is ready for immediate use. It can be viewed at our warehouse in Přerov. Dodpfx Alozy Spzjbjcl

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, Very well-maintained double-pressure press DM2 by Heuer Hammer. Immediately ready for use. Dedpfx Ajxywkwelbecl

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, Very well-preserved double-pressure press DM3 from Heuer Hammer. Immediately ready for use. Dcedsxywlnopfx Albol

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Djdpou Szucofx Albocl Year of build 1970 Serial number 5282 Electric connection 380V Dimension l 5500mm Dimension w 2200mm Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. Dedpjzt Nbzjfx Albocl This announcement has been automatically translated. Translation errors are possible.

Year of construction: 2023, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Dodpfx Ajzxxifelbscl Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: excellent (used), Year of construction: 2009, operating hours: 4,824 h, functionality: fully functional, power: 5.52 kW (7.51 HP), 1 x Atlas Copco Airpower B.V. rotary screw compressor and refrigerant air dryer mounted on 200L receiver tank. Manufacturer - Atlas Copco Airpower B.V. Model - GX5 FF. Dedjzu Aw Sopfx Albocl Serial number - CAI361147. Date of manufacture - 2009. Working pressure - 10 bar. Working hours - 4824 hours. Electrical requirements: Compressor - 400 V / 50 hz / 3 phase. Air dryer - 230 V / 50 hz / 1 phase.

Condition: used, Year of construction: 1981, National 2-3 Hot Former induction heater, feeder, straightener Dcsdjwl Iw Uopfx Albol

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Dsdeyhcc Aspfx Albocl Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: used, Year of construction: 1968, Hilgeland ME2 VM trimming press for sale. Dcjdpfx Ajur N Ewolbsl

Condition: used, functionality: fully functional, Dosing hopper with inclined base, equipped with an extraction screw conveyor. Capacity: 3 m3 Dimensions: 2800x1400x2300mm Driven by a high-efficiency ALMO IE3 geared motor (model MH3-100L4, 230/400V, 1445 rpm, manufactured 07/2017). Equipped with plexiglass inspection windows. Djdpfxjzxz Iqs Albscl Mounted on a mobile frame with wheels. In good overall condition. Made of painted steel.

Condition: like new (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, total length: 2,000 mm, total width: 800 mm, total height: 1,850 mm, power: 15 kW (20.39 HP), volume flow: 147.6 m³/h, operating pressure: 8 bar, noise level: 73 dB, Equipment: refrigerant dryer, We are offering this Champion FM15 screw compressor in like-new condition, manufactured in 2020. Manufacturer: Champion Model: FM15 Year of manufacture: 2020 Less than 500 operating hours. Engine power: 15 kW Dedpszwxnljfx Albjcl Air flow at 8 bar: 2460 liters/minute Noise level: 73 dB(A) Pressure tank: 500 l Dimensions: 2000x800x1850 mm DRYTEC MDD-100 air dryer with approximately 1000 operating hours. If you have any further questions or require more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2010, operating hours: 85,410 h, power: 15 kW (20.39 HP), Screw compressor Manufacturer: Atlas Copco Type: GA 15P Year of manufacture: 2010 Dsdpjzu Aw Eefx Albocl Operating pressure: max. 9.8 bar Volume flow: 2.39 m³/min Power: 15 kW Operating hours under load: approx. 85,410 h Weight: 500 kg Includes refrigerant dryer.

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Year of construction 1970 Dcedpfx Aleur N Dajbsl The machine is ready for immediate use!

Condition: used, Year of construction: 2008, operating hours: 22,795 h, machine/vehicle number: 5039, overall weight: 600 kg, power: 18.5 kW (25.15 HP), type of cooling: air, Equipment: documentation/manual, type plate available, Frequency-controlled screw compressor with integrated heat recovery Manufacturer: Kaeser Type: ASD 32 Dcjdpfx Aew Trgholbel Delivery rate: 8 bar - 3.2 m³/min Motor power: 18.5 kW Compressed air connection: G 1¼ Max. available thermal output: 16.4 kW Includes complete documentation + CE certificate Next maintenance at 24,360 operating hours Weight: 600 kg Required space: 1350 x 921 x 1505 mm (L x W x H) The machine can be demonstrated on site. All information subject to change. Prior sale reserved.