Used Doppstadt Ak 300 for sale (76)

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication Bwsdpfx Akjxx Tigsnew NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2015, operating hours: 10,900 h, functionality: fully functional, overall weight: 19,000 kg, Model: Fine Shredder Doppstadt AK 510 BioPower Year of manufacture: 06/2015 Serial No.: 983 Location: NRW Operating hours: approx. 10,900 hrs Availability: short-term, by arrangement Standard equipment: - Central axle trailer chassis for 80 km/h - Brake system with ABS according to EC directive - 50 mm EC towing eye, bolt-on shoe - Tyres 285/65 R 22.5 - Permissible total weight 19,000 kg - Mercedes-Benz engine OM 460 LA, 375 kW at 2,000 rpm, emission standard Euro Mot III B - Load-dependent feed control incl. automatic scraper conveyor reversal - Fuel tank 600 liters - Complete radio remote control - Hydraulic drive - Hydraulic support legs - Separate drive for feed roller/scraper conveyor 'TwinDrive' - Painted in RAL 2011 deep orange Bwedpfxey Sam Ue Aknsw Condition of the machine: The machine is in technically and visually good and ready-to-use condition. New diesel engine at 10,310 operating hours! Warranty: The machine is sold in the condition existing at the time of delivery. The seller assumes no liability for defects.

Condition: refurbished (used), Year of construction: 2019, operating hours: 4,947 h, functionality: fully functional, machine/vehicle number: 1381, overall weight: 18,920 kg, year of last overhaul: 2026, We offer this Doppstadt AK 560 ECO Power high-speed shredder, which has been fully refurbished and brought back to perfect working order by the dealer. It was first put into service in 2020. Features include: - 6m rear conveyor - Overhauled shredding chamber, new rotor - New hammers - New hopper and roof plates - Equipped with two screens - Complete engine overhaul - New flexible coupling - Up-to-date technical inspection A list of work carried out is available upon request. Bwedpfxsy Tbcge Aknow If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2019, Doppstadt HS 800 Star Screen Hooklift Manufacturer: Doppstadt Model: HS 800 Star Screen Hooklift, fraction 0-80mm Year of manufacture: 2019 For sale: a Doppstadt HS 800 star screen in hooklift design from the year 2019. Equipment: 2-fraction design Central lubrication system Hooklift system Operating weight: approx. 9,000 kg Additional interchangeable star screen kit, year of manufacture 2020, fraction 0-100mm The machine is in good and operational condition. Thanks to the additional star screen kit, the machine can be flexibly adapted to different material requirements. Ideally suited for processing compost, biomass, wood, green waste, and other bulk materials. Further information, photos, or an appointment for viewing are available upon request. Bjdpfx Ae Ad N Ugsknsww Price: Upon request Location: Upon request Errors and prior sale excepted.

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Bodpfx Akjy D Nktjnoww Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: used, Year of construction: 2010, operating hours: 7,191 h, functionality: fully functional, machine/vehicle number: W09430219A2D38810, overall weight: 19,000 kg, We are selling our used Doppstadt shredder (year of manufacture 2010) with no warranty of any kind. The machine is ready for operation and is currently used in our facility for shredding disposable pallets and green waste. Bjdpfx Aezv Hzwekneww

Condition: excellent (used), Year of construction: 2019, Doppstadt HS 800 Star Screen with Hooklift System Manufacturer: Doppstadt Model: HS 800 Star Screen with Hooklift System Year of Manufacture: 2019 For sale is a Doppstadt HS 800 star screen with a hooklift system, manufactured in 2019. Equipment: 2-fraction version Central lubrication system Hooklift system Operating weight: approx. 9,000 kg Additional interchangeable star screen kit, year of manufacture 2020 Bwedpfxozdbp Te Aknjw The machine is in good and operational condition. Thanks to the additional star screen kit, the machine can be flexibly adapted to different material requirements. Ideally suited for the processing of compost, biomass, wood, green cuttings, and other bulk materials. Further information, photos, or an inspection appointment are available upon request. Price: Upon request Location: Upon request Errors and prior sale excepted.

Condition: new, Year of construction: 2025, Economical solutions with short delivery times Conveyor belts suitable for all common screening machines such as Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T4-T7, Komptech Max, Mustang and others Conveyor belts suitable for all common shredders such as Doppstadt Bison / Büffel / Mamut, Biopower, AK 430, AK 235, AK 635 and others Manufactured according to your specifications: - Unlimited length - Width up to 1800 mm - 2, 3, or 4 material layers - Various profiles - Steel wire quantity: 10cm/ 35 +/-1 - in various material thicknesses Bsdpfx Aexmvplsknjww Conveyor belts of the highest quality

Condition: new, Year of construction: 2026, functionality: fully functional, Shafts for Shredders: Arjes, Terex, Eggersmann, Olnova, Pronar, Komplet, Doppstadt Arjes Impaktor 250/350, Arjes Compactor 300, Terex TDS 815, Terex Caiman 150, Terex Greentec LS2, Komplet Krokodile, Olnova model 5, Doppstadt Core Shredd 250, Eggersmann Impaktor 250 - Standard shafts - Special shafts - Customer-designed shafts - Spare parts - Knives Concrete / Paddle / Star / Metal / Electro and many more! Bwodpfxjychwzs Aknow

Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Bwedexx Tfzepfx Aknew 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: new, We supply wear parts for your Doppstadt AK 430, 435, 510, 535, 560, 635, 640, etc. Highest quality thanks to 'Made in Germany'! - Rear baskets - Rear flaps - Impact plates, toothed, with counter blade, smooth - Wear plates - Scraper floor bars - Scraper floor chains - Flail tips - Flail holders - And much more. Bsdow I Ar Ropfx Aknsww

Condition: new, Year of construction: 2026, Belts and Accessories We offer top-quality conveyor belts suitable for all common screening machines and shredders. Custom-made to your specifications, we guarantee reliable performance and long service life. Bedpfx Aoyg D S Nokneww Suitable for Screening Machines - Doppstadt SM 518 / SM 618 / SM 620 / SM 720 - Terra Select T4 – T7 - Komptech Max - Mustang and other models Suitable for Shredders - Doppstadt Bison / Buffalo / Mammoth, Biopower, Inventhor - AK 430 / 510 / 635 - and other popular models Technical Features & Versions - Length: unlimited, tailored to customer requirements - Width: up to 1,800 mm - Number of plies: 2, 3, or 4 as required - Various profiles for optimal conveying performance - Steel cord quantity: 10 cm / 35 ±1 - Various material thicknesses available Your Advantages - Custom manufacturing according to your specifications - Superior quality for maximum service life - Short delivery times for rapid availability - Reliable performance for all common machines Contact us for a tailored quote and advice on conveyor belts for your application.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,566 h, functionality: fully functional, overall weight: 25,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 9,630 mm, total height: 3,990 mm, total width: 2,547 mm, rotor length: 3,000 mm, power: 360 kW (489.46 HP), number of cylinders: 6, number of rollers: 1, For sale is a Doppstadt Büffel DW3060. This machine is one of the virtually indestructible Doppstadt machines. It is in used but good and operational condition. Can be demonstrated on-site while in operation. Can be transported on the road via axle with a suitable towing vehicle. An absolutely high-performance machine. Available immediately. Basic model DW 3060-C "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC tow hitch incl. attachment shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the sides) Permissible total weight 25,000 kg Tires 385/65 R22.5 Additional hydraulic connections Hydraulic preparation for comb screen system and drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint: 2-component paint RAL2011 orange Additional equipment: BioPower package - Engine power: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 Form C armored (42 pieces) - Comb screen system with fine strip screen - Transmission oil cooler Hydraulic drive Radio remote control Bwsdpfx Aozp H Tysknew NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system (prepared)

Condition: refurbished (used), Year of construction: 2023, operating hours: 5,189 h, functionality: fully functional, power: 390 kW (530.25 HP), year of last overhaul: 2026, Equipment: Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard - Auxiliary hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gear, 380 kW – VARIO – - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor belt: belt length 4,450 mm, belt width 1,000 mm - Centrally positioned lubrication strips - 24 V electrical control system - Additional electric pump for the operation of the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb flap, open/close comb, optionally raise/lower permanent magnet belt, optionally raise/lower folding hopper” - Complete radio remote control Bwedpfx Akoyu Snuonjw - Large side GRP maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Loading protection on both sides - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint: RAL2011 deep orange Additional equipment: - 500 mm flat chain undercarriage unit - Watering system with hopper extension H=300 mm on both sides - Size "L" shredding system – VARIOMAT (Variomat system L600/4 – 42 teeth) - Rear conveyor length 7 m, width 1200 mm - Size "L" "Limiter" (20 pieces) - LED light package for engine compartment and rear - Central lubrication system with pump Delivery date to be arranged.

Condition: repair required (used), Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Bjdpfxjy D Nics Aknjww Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Year of construction: 2016, condition: used, No. 10010 Screening machine Doppstadt SM 620 K Used, year of construction 2016 (overhauled by the manufacturer in 2024) Mobile drum screen on chains Can be used for humus / soil, wood, waste, compost, light building rubble, etc. 7500 working hours Crawler chassis incl. 2 driving speeds Track width 500 mm Deutz TCD3.6 L4 diesel engine, 90 kW at 1600 rpm (meets EUROMOT IIIB/Tier 4i emission standard) Auxiliary pump drive for connecting additional hydraulic equipment Reversible fan on water and oil coolers Complete engine unit swivels out Fuel tank 300 litres 5 m3 hopper capacity Hydraulically folding side belt, belt length 5000 mm, belt width 1000 mm Bsdpov Eyqbjfx Aknsww Hydraulically folding rear belt, belt length 5000 mm, belt width 1000 mm Emergency stop switch on side and rear belt Load-sensing material feed from the conveyor floor to the screen drum Infinitely variable screening drum speed from 0 - 18 rpm Infinitely variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: Emergency stop switch (screen only) / Fold in & out rear belt / Fold in & out side belt / Bend side belt Hydraulically folding cleaning brush with individual brush elements and spring tines Central lubrication bars 24 V electrical control Radio remote control incl. transmitter, receiver, 230 V charger, 12/24 V charging cable, holder for transmitter (The following functions can be controlled: Engine stop, engine speed +/-, fold rear conveyor in & out, fold side conveyor in & out, move & steer machine, prepare stone grid open/close) Hydraulic preparation for star screen operation Hydraulic quick hitch between rear conveyor and machine Acoustic start-up warning Doppstadt Telematic system Paint finish: RAL2011 deep orange Additional hydraulic connection 40 l/min at the rear of the machine Magnetic roller for rear conveyor Flow divider on rear conveyor Internal toothed hopper belt drive Screening drum SM620 QV30-38 BL08 for SM 620 profi/Plus/.2 (length 5430 mm / diameter 2000 mm / thickness 8 mm / perforation 30 mm (offset perforation)) Transport dimensions approx. 10550 x 3000 x 3690 mm LWH Weight approx. 24000 kg Sale on behalf of customer, ex location near 85221 Dachau, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: ‘purchased as viewed’ Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: like new (used), We offer a comprehensive spare parts package for the machine types Doppstadt DW 3060 and Doppstadt AK 430/435/560. These are new and as-new parts! Please request our list! Do you have a problem with your bevel helical or planetary gearbox? We offer qualified repair service, spare parts, and new gearboxes! We will accept your defective gearbox as part exchange after inspection! Please send us your enquiry! Bodjqx Ur Depfx Aknsww

Condition: used, Year of construction: 2013, operating hours: 4,867 h, functionality: fully functional, Equipment: Basic model DW 3060-C “Büffel” Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. ABS and lighting according to EC directive 50 mm EC drawbar coupling incl. adapter shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the side) Permissible total weight 25,000 kg Tires 385/65 R22.5 Mercedes-Benz diesel engine OM460LA, 315 kW at 2,000 rpm, meets exhaust emission standard EUROMOT IIIB Additional hydraulic connections 20 l and 70 l/min. (using a variable pump) Hydraulic preparation for comb basket system and drive mechanism Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pieces) and comb (22 pieces) - form C (174 mm, armored) Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control system Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint finish: 2-component paint RAL2011 deep orange Additional equipment: BioPower package - Engine output: 360 kW, with reinforced planetary gearbox Bodpfx Aszn Icyjknoww - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 form C armored (42 pieces) - Comb basket system with fine strip basket - Transmission oil cooler Hydraulic drive mechanism Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system Funnel attachment plates foldable on both sides Delivery date will be agreed upon.

Condition: used, Year of construction: 2017, operating hours: 10,400 h, Equipment: Basic version DW 3060-F "Buffalo" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EU directive 50 mm EU towing eye incl. adaptor shoe Hydraulically adjustable support leg Splash protection (mudguards inside and on the sides) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with emission standard EUROMOT IV Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) - Size L (174 mm, armoured) Rear conveyor belt: length 5,500 mm, width 1,200 mm, hydraulically foldable, with anti-magnetic central section Longitudinal conveyor belt: length 3,300 mm, width 1,000 mm Centrally positioned wear strips 24 V electric control Roller reversing via electric motor when engine is off automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic travel drive Radio remote control Attachment for comb extension Limiter Size “L” Comb extension Size "L" Limiter Wetting system Removable hopper extension plates on both sides Bwedpfeyu Srmex Aknsw Delivery date by arrangement

Year of construction: 2025, operating hours: 100 h, condition: good (used), functionality: fully functional, Good screening drums – suitable for Doppstadt SM 518 1 × Screening drum with 40 mm square openings 1 × Screening drum with 60 mm round openings Bwsdpfxo Afh Sgo Aknsw Drum dimensions per drum: Ø 1,800 mm × 4,700 mm length Price: The stated price applies to both screening drums together. The drums can also be purchased individually. The individual price is €6,000 net per drum.

Condition: used, Year of construction: 2007, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: W0925621972D07090, overall weight: 18,000 kg, We are selling our Doppstadt Buffalo DW2060. This machine is one of the most reliable Doppstadt models. It is in used condition but is in good working order and ready for use. Bodpfe Adnz Sex Akneww It can be demonstrated and tested on-site at our facility. It can be transported on the road on its axle with a suitable towing vehicle. This is an exceptionally powerful machine and is available immediately.

Condition: excellent (used), Year of construction: 2018, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F M Shaft - Year of manufacture: 2018 - Engine: MTU R61300 with 490 hp - AD BLUE - Weight: 30,000 kg - Remote control - Humidification system - Rear conveyor belt 7m - Over-band magnet - Track chassis Bwsdpfj Ad N Rnsx Aknow - Central lubrication system - Limiter - Roller: M 3000mm x 800mm - Teeth: 124 The machine is in its original condition, not repainted, only workshop-reconditioned.

Condition: used, Year of construction: 2017, operating hours: 3,706 h, overall weight: 20,000 kg, Doppstadt DW 2060K Biopower - Year of manufacture: 2017 - Engine: Mercedes-Benz OM 926 LA / 326 hp - AD BLUE system - Weight: 20,000 kg Bwodpez Idb Njfx Aknow - Remote control - Humidification system - Rear conveyor belt, 5 m - Overband magnet - Tracked chassis - Roller: 2000 mm x 600 mm - Teeth: 24

Condition: excellent (used), Year of construction: 2015, For sale: a Doppstadt Bioscreen rotary screen. Year of manufacture 2015, in very good condition, little used. The rotary screen is hydraulically driven by the auxiliary drive of the upstream screen and produces a screening cut of approximately 150 mm. Bodpfx Akjz Tdyqjnsww

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Bwjdsz Rqcmspfx Aknsw Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.