Used Manual Edm Machine for sale (72,323)

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Hjdpfxeyrqpfj Aahop Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: used, Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Hjdpex Hgg Djfx Aahop

Condition: used, Manual bending machines. The machines are very sturdy, fully operational, and have knives in good condition; rust needs to be cleaned off. Testing is possible. Hedpfx Aoymm D Ijahsp Specification: Manufacturer: Poland Year of manufacture: 2008 – 2012 Working length: 3100 mm Bending thickness: 1.0 mm If you have any further questions, we will be happy to answer them.

Condition: used, Inverter welding machine for manual arc welding, TECHNOLIT Type PROFImat 170 Plus MMA welding machine, inverter welding machine, manual arc welding inverter New - unused Serial No.: TB1703500316 Article No.: 440030 Year of manufacture: 2022 Output WIG (DC) 170 amps, 45% duty cycle 150 amps, 60% duty cycle 135 amps, 100% duty cycle Output manual arc welding 170 amps, 35% duty cycle 145 amps, 60% duty cycle 125 amps, 100% duty cycle Adjustment range 5-170 amps, continuously adjustable Mains connection 230 volts, 50 Hz - Hot-start function (optimizes ignition behavior, simplifies starting the welding process for electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents possible sticking of the electrode) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition - Stick electrode welding, suitable for all electrode types up to Ø 4 mm - Ground cable with plug connection Hodpfx Asi E Iz Ieahep - Electrode holder with 3-meter cable and plug connection - Equipped with a 230-volt Schuko plug - S-mark for welding under increased electrical hazard - Overvoltage protection Dimensions (device without cable) L x W x H 310 x 155 x 265 mm Weight (without cable) 7 kg NEW - unused, from stock

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused Hedpfx Ajvg Rh Tsahjp

Condition: used, Manual swing bending machine KRAMER, type AMS 650 x 1.5 Manual swing bending machine, press brake Year of manufacture approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper die opening approx. 60 mm Bending die adjustment approx. 0-25 mm Bending angle 0-180° - Upper die adjustment via hand crank - Pre-setting rail for the bending die - One-piece sharp bending rail, 135° Space requirement L x W x H 1200 x 600 x 1100 mm Hjdpodzqaaofx Aahjp Weight 160 kg Good condition

Condition: excellent (used), See images; a wide range of other clamping devices is available! Please contact us if you are interested. Hsdpfx Aaeha U U Rohep

Condition: new, Manual chamfering machine Developed and manufactured in England - Variable spindle speed adjustment - Max. bar diameter 26-105 mm A second cutting head is required for smaller diameters - Adjustable bar support - Max. chamfering/turning length 45 mm - Turning and chamfering tool - Precision three-jaw chuck - Large chip collection container for easy cleaning - Easily moved with a pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE certified Hjdsgi Rnwopfx Aahop OPTION: - Adjustable stop + universal chamfering tool €1,990

Condition: new, Manual chamfering machine Developed and manufactured in England - Variable spindle speed adjustment Hjdpfx Aebwfh Usahep - Max. bar diameter 80 mm - Adjustable bar support - Max. chamfering/turning length 37 mm - Precision three-jaw chuck - Large chip collection container for easy cleaning - Easily movable with a pallet truck - Weight 500 kg Dimensions L/W/H 800x500x1250 mm 1-year warranty CE certified OPTION: - Adjustable stop + universal chamfering tool €1,990

Condition: excellent (used), Year of construction: 2019, operating hours: 4,247 h, functionality: fully functional, machine/vehicle number: T1284, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 370 mm, total height: 2,570 mm, total length: 1,852 mm, total width: 2,825 mm, workpiece height (max.): 400 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, type of input current: three-phase, table width: 750 mm, overall weight: 5,350 kg, table length: 550 mm, table height: 400 mm, empty load weight: 5,350 kg, table load: 1,500 kg, input voltage: 400 V, input frequency: 50 Hz, The Sodick AG60L die-sinking EDM was manufactured in 2019. It features a ceramic table measuring 750 x 550 mm and can handle a maximum workpiece weight of 1,500 kg. The machine is equipped with a linear motor, glass scales, and a remote control unit, which enhance both precision and operator convenience. We invite you to purchase the Sodick AG60L die-sinking EDM. Please contact us for further details about this machine. Hsdpfxex Ekb Ne Aahsp Axis travel (X/Y/Z): 600 / 420 / 370 mm Equipment includes: replaceable paper filter, SEC-10 (C-axis), SGF2 Nano Wear Unit, fire extinguisher, TMM3 Power Generator, dielectric cooling unit, 15" TFT touchscreen, linear motors (X, Y, Z axes), glass scales (X, Y, Z axes), ceramic work area, remote control. Machine dimensions (LxWxH): 1852 x 2825 x 2570 mm / Machine weight: 5,350 kg Max. workpiece weight: 1,500 kg / Ceramic table size (W x D): 750 x 550 mm Distance floor-to-table: 850 mm / Max. electrode weight: 50 kg Dielectric fluid level (min-max): 150 – 400 mm / Dielectric capacity: 465 liters

Condition: good (used), Year of construction: 1989, machine/vehicle number: 01-15792, Offer 24194 Technical data: - max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop Hedpfjtylgusx Aahop - Upper beam is operated with side hand crank - max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Condition: good (used), Year of construction: 1976, machine/vehicle number: 01-6262, Offer 25246 Technical specifications: - Max. working width: 2040 mm - Max. material thickness: 2 mm - Bending angle: approx. 0 - 135° - Bending angle lockable with end stop - Upper beam operated via lateral hand crank - Max. upper beam stroke: 85 mm - Max. adjustment of bending beam: 80 mm - Bending process assisted by eccentric weight Hsdpjw Uhamefx Aahep - Space requirement: approx. W 3250 x H 1250 x D 450 mm - Weight: approx. 1700 kg

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Hsdexrpm Uspfx Aahsp Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16m² paper candle - Compressor - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Table size: 600 x 400 mm Maximum workpiece size: 900 x 600 x 330 mm Maximum workpiece weight: 750 kg X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Generator output: 60 A Machine dimensions: 2190 x 1880 x 2360 mm Hjdpfx Ajyity Usahop Machine weight: 2800 kg Accessories: - Magnetic table and EROWA clamping system - Machine manual and operating instructions The machine is in very good condition and comes from a small family business that recently closed down.

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm Hsdpfx Aasvvl Uaehjp X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: good (used), Year of construction: 1998, Controller FANUC Series 16W Max size of wpc. 800 x 730 x 300 mm Max table load 750 kg X travel 520 mm Hedpfx Aeul Uwloahep Y travel 370 mm Z travel 300 mm U travel 120 mm V travel120 mm Dia of wire Ø 0,05 – 0,33 mm No. of axes 5 (X, Y, Z, U, V) Capacity of tanks 650 Liters Accessories - Dielectric cooler - Coolant unit - Interface RS232 - MPG - Automatic wire threading - Manuals

Condition: used, Manual Lever Corner Notcher BERNARDO Type AK100 Manual Notching Machine Serial No. A17010320 Year of manufacture 2017 Blade length: 100 mm Material thickness at 40 kg/mm²: max. 3 mm Notching angle: 90° Stroke: 28 mm Table size: 380 x 280 mm - Adjustable stops Hjdeyhq Aqjpfx Aahep - Lever arm length: 650 mm, 500 mm bolt-on extension missing Dimensions (L x W x H): 380 x 380 x 1000 mm (with 650 mm lever) Net weight: 90 kg Good condition

Condition: new, Year of construction: 2025, New machine immediately available Capacity: 1520 x 2.25 mm segment-split upper cheek rail -tool rest -Adjustment of the upper beam by hand lever left/right Hsdpfx Aaeh S Uirshsp

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU Hsdpfx Asfifbbjahep immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Hedpfx Asfifa Ajahjp Manufacturing EU immediately available ex works Freight costs on request

Condition: used, Year of construction: 1998, machine/vehicle number: 22406695, travel distance X-axis: 992 mm, travel distance Y-axis: 807 mm, travel distance Z-axis: 561 mm, workpiece length (max.): 1,260 mm, workpiece width (max.): 1,060 mm, workpiece height (max.): 550 mm, input voltage: 400 V, input frequency: 50 Hz, We are offering this used AEG Elotherm P1 sinker EDM machine, year of manufacture 1998. Type: P1 Serial number: 22406695 Hedpfx Aaeypln Dshop Order number: 704.1177 Voltage: 400 V Current: A Frequency: 50 Hz Switch-off method: Plan: Year of manufacture: 1998 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Working width 1010 mm Max. sheet thickness 370 N/mm² 1.5 mm Upper beam opening 80 mm Small bending width 10 x s mm Small Inner radius 1.5-2 x s mm Bending beam adjustment approx. 40 mm Max. bending angle 130° Dimensions L x W x H 1650 x 500 x 1400 mm Weight 380 kg Accessories / Special Features: • Upper tool, 45° bending rail • Flat rail on the bending beam • Graduation with stop • Compensating counterweight • Heavy-duty cast iron construction • Easy adjustment of the upper beam via spindle • Versatile • The bending tools are suitable for narrow and wide sheet metal for fine bending • Angle adjustment with graduation Hodpewg Ru Eefx Aahjp • Easy bending thanks to counterweight Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1270, overall weight: 280 kg, table length: 457 mm, table width: 660 mm, Electro-Discharge Drilling Machine (Disintegrator) ELECTRO ARC 2-DBQT FOR SPARK ERODING BROKEN DRILLS AND TAPS Ideal for quickly and cleanly removing broken taps, drills, studs, and screws with precision, while leaving the surrounding material intact. Hsdsymw Spopfx Aahjp - Year of manufacture: 1999 - For taps M1.6 to M38 - For drills Ø1 to Ø38 - 1x collet Ø4 mm - 1x collet Ø4.5 mm - 1x collet Ø5 mm - 2x collets Ø6 mm - 380 V - 10 kVA - 15 A - 50 Hz - Serial No.: 1270 Free loaded onto truck

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, AGIE FUTURA V 1PM MONDO 20 STAR Year: 2000 Hedpfeymnrmox Aahep Operating hours: approx. 10,000 h Documentation: Complete

Condition: new, Year of construction: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 1,000 mm, table length: 4,000 mm, table width: 2,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, X: 3000x2000 mm Y: 1500 mm Z: 1000 mm C-axis 360° Positioning resolution Feed range 3000 mm/min Traverse speed 18000 mm/min Working area 4000*2000*1250 mm Table size 3200*1600 mm Distance between head and table without C-axis is 1500 mm and with C-axis 1470 mm Max table load 25,000 kg Machine dimensions 6640 x 5800 x 4120 mm Machine weight 37,000 kg Hodpsxr Uzwjfx Aahep