Used Maka Hc 57 R for sale (45)

Condition: good (used), Year of construction: 1999, MAKA HC 57 robot, for 5-axis machining Year of manufacture: 1999 Machine in gantry design with rack and pinion drive. Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1 MB memory and 3.5" floppy disk drive. Mobile control panel. Machine table approx. 6,000 x approx. 1,270 mm. Chsdpfx Aozwk Tasfgec Working areas / machinable cube size with tool D 160 / length 160 mm: Y-axis: approx. 6,000 mm in 3-axis operation, approx. 5,700 mm in 5-axis operation X-axis: approx. 1,050 mm in 5-axis operation Z-axis: approx. 190 mm / travel approx. 420 mm A-axis: 540° B-axis: 360° (swivel axis +/- 180°) Rapid traverse speed X/Y-axis: 45 m/min. Z-axis: 10 m/min. 1 universal head for 5-axis milling, with 50° angled head, power max. 12.5 kW, speed continuously variable, adjustable up to 17,000 rpm. Milling spindle liquid-cooled. Chip extraction system with slat curtain and suction nozzle for room air extraction for 5-axis operation and swiveling extraction for 3-axis operation. Tool interface ISO 40 for automatic tool changer system. 1 chain tool magazine with 24 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: 10 support tubes on linear guides with pneumatic release device for quick positioning. 2 control circuits for stops "Raise / Lower" 2 control circuits for e.g. sliding strip "Raise / Lower" 2 control circuits for pneumatics "Clamp / Release" 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. 1 chip conveyor integrated in the table, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: 1 vacuum pump, including tank with 250 liter capacity for rapid vacuum build-up. Other: 10 vacuum supports with various suction cups. 4 clamping devices for posts / curved parts, with pneumatic clamping. 4 pneumatic stops Automatic central lubrication. Control cabinet with air conditioning unit. Work safety: Moving protective cabin with safety bumpers on the operator side. Any necessary safety measures for the rear of the machine must be provided by the customer. The machine can be inspected in working order in the southern Germany region, near the A81 highway / Black Forest.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: Csdpfovmywqex Afgohc CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: used, Year of construction: 2000, Used machine MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 CNC machining center for processing interior doors (hardware mortising, vision panel cut-outs, peephole machining, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working ranges: For door width: 250 – 1,280 mm For door height: max. 2,500 mm For door leaf thickness: max. 80 mm Rapid traverse speed: X / Y-axis: 45 m/min Z-axis: 10 m/min 1 universal milling unit SK40 With integrated A-axis swivel 190° (+/- 95°), along X-axis for lock/hinge machining on both sides along the longitudinal door edge directly with the unit. Water-cooled milling spindle, nominal output 8 kW, available from 7,000 rpm, continuously variable speed from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change. 1 chain-type tool magazine with 24 positions, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, positioned at unit’s service position. Max. tool length 200 mm from spindle mount. Milling spindle and 2 x magazine positions equipped for angle/feeler heads with torque support. Machine table with width adjustment via program, as well as width measurement for edge processing for consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically elevating and lowering. 1 longitudinal stop with pneumatic insertion stroke, mounted on the traversing unit for positioning according to door length and thickness. 4 pneumatic lateral stops, swing-in type, for doors with veneer/cover overhang up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single/double rebate doors). 2 vacuum clamping lines, 5 vacuum suction cups per line, 130/200 x 70 mm, with touch valve and blow-off device. Per line, 3 vacuum cups can be lowered according to the door height being processed. 1 vacuum pump, approx. 128 m³/h suction capacity, with 250-liter intermediate tank, enabling rapid vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioner. Safety features: Bumper on both sides of the gantry, protective fencing on the sides. Various tools and tool holders can be taken over by agreement. Cedpsv S Dn Dofx Afgehc The machine can be inspected in Hermaringen.

Condition: used, Year of construction: 2001, machine/vehicle number: 21012101, functionality: fully functional, operating hours: 49,849 h, input voltage: 415 V, input current: 36 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 2,250 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 1,000 mm, workpiece weight (max.): 420 kg, number of axes: 5, number of slots in tool magazine: 10, controller manufacturer: Siemens, actuation type: electric, total height: 4,000 mm, total length: 7,300 mm, total width: 7,000 mm, table length: 2,250 mm, table width: 1,500 mm, control voltage: 24 V, 5-axis CNC machining center for wood or plastic. The machine was used for contour milling of plastic components. It is equipped with an HSD spindle, and the tool holder is of the HSK63 type. Cedpfx Afezhtpfegjhc The machine can be purchased with or without an extraction system, depending on the intended application. The dimensions specified for the machine include the extraction system. An inspection of the machine is possible at any time; it is currently still in production.

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC-controlled machining center for 5-axis machining CNC control Control type: bwo CNC 900 C, 512 KB RAM, PC 80486, 1 GB HD Controlled axes Travel distances: 14000 x 3300 x 200 mm Units Type designation: Milling motor HSK 63F Cooling: Water cooling Power: max. 20 kW Speed range: 1000-17000 min-1 Lubrication: Grease lubrication for 2000 operating hours Tool holder: HSK 63F Chjdpfey S Hahsx Afgoc Type designation: Chain tool changer Number of positions: 32, of which 4 are equipped with a torque support for holding angle/probing heads Holder: HSK 63F Diameter: 90 mm / arranged 160 mm Tool length: 160 mm Workpiece cube dimensions X-axis: max. 3300 mm Y-axis: max. 14000 mm Z-axis: 200 mm A-axis: +270° rotary axis B-axis: ±98° swivel axis

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new Csdpfsvmpx Rex Afgshc - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: used, Maka band saw Upper wheel: 60 cm, Lower wheel: 60 cm, Cedpfxsz Dtfis Afgohc Cutting height: 30 cm, Motor power: 3 kW, The machine is in good working order and ready for use.

Condition: excellent (used), Year of construction: 1995, CNC machine in good condition due to limited use. Previously used for door production but can be used for any purpose. Cjdpeig T Epjfx Afgshc Double table, can be loaded from the left and right. 4-axis x 5000 mm y 1350 mm z 450 mm a 190° Main spindle SK 40, 8 kW, water-cooled Up to 17,000 rpm Chain magazine with 24 positions.

Condition: excellent (used), Year of construction: 1995, upon request Csdpjfxgmgefx Afgohc

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Combined oscillating mortiser and drilling machine. Available immediately Csdsgiwl Dopfx Afgohc

Condition: used, Year of construction: 1999, Used MAKA KPF 334 RT 5-Axis CNC Machining Center Year of Manufacture: 1999 High-performance CNC milling center for 5-axis machining, ideal for machining deep-drawn parts. Compact design with control cabinet integrated into the base frame. Equipped with automatic central lubrication and a control cabinet with air conditioning unit. Model/Version: Gantry-type machine with two aluminum tables Axis Data: Axis: Size / Travel / Speed X-Axis: 2,750 mm / 40 m/min. Y-/V-Axis: 2,400 mm / 40 m/min. Z-Axis: 700 mm / 15 m/min. Rotation Axis: 540° / 10,000°/min. Swivel Axis: 200° / 10,000°/min. Machine connection: Voltage: 400V Voltage deviation: max. +/- 5% Operating temperature: 10 - 35° Air pressure: 6 bar Working areas / workpiece cube dimensions: X-axis: 2 x 1,000 mm (coupled 2,150 mm) Y-axis: 1,000 mm Z-axis: 400 mm These specifications are based on a fixture height of 170 mm / tool length of 60 mm. 1 Equipment 1.1 Table design Two aluminum surface tables with threaded bushings for mounting, each measuring 1,000 x 1,000 mm. The tables can be coupled for machining large components. Both table tops are also equipped with threaded bushings and centering bushings (or dowel pins) to accommodate the customer's milling fixture, as specified. 1.2 Vacuum supply Machine equipped with a vacuum system. Chsdpjv S Ut Defx Afgsc 1 Vacuum Pump 1.3 Clamping System 1 Vacuum clamping circuit with vacuum distribution unit, pressure gauge, and pressure switch. Plug-in couplings mounted on the machine table. 1.4 Milling Unit: 1 DFM 83/90 milling spindle, ER16 / M22 x 1.5 2.5 kW / 27,000 rpm Universal unit for 5-axis milling with 90° head, tool holder ER16 / M22 x 1.5 1,000 to 27,000 rpm (infinitely variable speed), air-cooled. A-axis 540° (rotation axis +/- 270°) B-axis 200° (swivel axis +/- 100°) 1.5 Axis Drives Ball screw in the X/Y and Z axes; A/B axes with hollow shaft drives. 1.6 Work Safety 1 sliding door per table, automatically opening. Includes protective cabin. 1.7 Control System 1 BWO 900 machine control unit with 1 BWO 900C control unit, mounted on a mobile control panel. 1.8 Mains Voltage The machine is equipped for the following mains voltage: Voltage: 400 V (max. +/- 5%) Installed power: approx. 9 kW Frequency: 50 Hz The use of residual current protection in the machine supply line is not permitted. 1.9 Country Specification Technical machine documentation in German. Consisting of: - Operating instructions for the machine - Operating instructions for the control system - Electrical and pneumatic circuit diagrams - Control system language in German.

Condition: good (used), Year of construction: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with control cabinet integrated into the base frame. CNC control BWO 900C, 1 MB memory, in the integrated PC. Technical data: Working areas / cube dimensions: for tool length 130 mm and diameter 60 mm X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 300 mm, at 120 mm tool height Chodpfx Afjir Aq Tjgoc A-axis: 540° B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 45 m/min. Z-axis: 15 m/min. A/B-axis: 10,000 °/min. 1 high-speed milling spindle HSD 6.8 kW, Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm. With ceramic bearing, air-cooled. Tool holder SK 30 with tool changer. 1 drum-type tool magazine for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the top surface. Aluminum table top 1,000 x 1,000 mm with grid drilling 1 vacuum pump 54 m³/h, 1 vacuum clamping circuit Automatic central lubrication, Control cabinet with air conditioning unit. Work safety: Sliding door for front loading, protective cabin for the rear of the machine, with a side access door; the cabin is open at the top. Connection values: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz The use of an RCD (residual current device) in the machine power supply is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 18 m³/h Tool holders and machining tools are not included in the scope of supply. Used machine, without any guarantee or warranty.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 26010607, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 5,900 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 280 mm, number of axes: 5, number of slots in tool magazine: 20, controller manufacturer: SIEMENS SINUMERIK, total height: 3,200 mm, total length: 11,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, table length: 5,900 mm, table width: 1,600 mm, Equipment: CE marking, MAKA PE 75 5-axis machining center – in good working order and ready for use. The machine was used for the production of wooden stairs. Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Number of milling spindles: 1 Vertical drilling spindles: 16 Horizontal spindles in the X-axis: 2 Horizontal spindles in the Y-axis: 2 Vacuum pump: 130 m³/h Number of vacuum pumps: 1 Number of traverses/consoles: 8 Pneumatic pressure: 6 bar A-axis: ±90° / 180° C-axis: 540° Rapid traverse X/Y: 60 m/min Rapid traverse Z: 24 m/min Electrospindle cooling: liquid Table: traversing/console type Application: wood processing / stair production. Chjdpjzwcfzofx Afgjc

Condition: repair required (used), Year of construction: 1989, machine/vehicle number: 426578, functionality: unexamined, power: 16 kW (21.75 HP), input voltage: 380 V, input current: 32 A, input frequency: 50 Hz, number of axes: 5, number of slots in tool magazine: 24, controller manufacturer: Num, total height: 3,000 mm, total length: 10,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, table length: 7,000 mm, table width: 2,000 mm, We offer this used MAKA KPF-6200 machining center, manufactured in 1989, as a source of spare parts. Csdpoz Hlhnsfx Afgehc Type: KPF-6200 Machine No.: 426578 Year of manufacture: 1989 Pneumatic pressure: 6 - 8 bar Hydraulic pressure: 180 bar Rated voltage: 380 V Rated frequency: 50 Hz Control voltage: 24 V Rated power: 16 kW Rated current: 32 A Wiring diagram no.: 3.96 - 123 Condition: in need of repair (used) Functionality: untested Tool changer in need of repair without milling cutters Sold as a source of spare parts The Num control unit with the switch cabinet is still functional. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Motor power: 2.02 kW Chjdpfx Afeh Im S Negsc Pneumatic tensioners Pneumatic depth adjustment Shoulder length: 220 cm Working depth: 16 cm

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, MAKA oscillating hammer drilling machine, slot drilling machine # TYPE STV 170 Year of manufacture: 1991 Includes 2 additional drilling units and a large amount of accessories, including stops, etc. Cedpfx Asz Efwyefgehc Condition: see pictures (See pictures – as is) – a prior inspection is highly recommended. Subject to prior sale. All information without guarantee. The items can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. The shipping costs are an estimate and may vary depending on the distance and weight; please inquire. The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Warranty basis: due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: repair required (used), Year of construction: 2005, functionality: unexamined, operating hours: 52,751 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, number of slots in tool magazine: 32, controller manufacturer: BWO, overall weight: 16,600 kg, controller model: CNC 920, continuous operating pressure: 6 bar, nominal power (apparent): 12 kVA, number of spindles: 1, rotational speed (max.): 20,000 rpm, rotational speed (min.): 1,000 rpm, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of gantry including unit and tool changer approx. 15,000 kg Weight of control cabinet approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 l/h uncompressed Control type: BWO CNC 920 Controlled axes + max. travels approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 rpm, speed range: 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 positions / 160 mm Machine table: 2 clamping stations with 6 support crossheads with clamping / pneumatic clamping devices Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° The machine is currently not operational. The spindle, including the conversion kit, must be replaced with newer software (available upon request from Maka). The machine can be inspected live in 94424 Arnstorf, Germany, by appointment. All information is provided without guarantee; sales to commercial customers only. Inspection and pickup by appointment in 94424 Arnstorf, Germany. Csdev Rlpyjpfx Afgohc

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Csdpfszgtyhsx Afgshc Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, For sale is a robust MAKA/Griggio surface planer, model AH 430. The machine features a robust, heavy-duty design and is suitable for professional use in carpentry, joinery, and woodworking. Technical data / Features: Manufacturer: MAKA/Griggio Model: AH 430 Planing width: 430 mm Year of manufacture: 1994 Motor power: 4.0 kW Connection: 380 V / 50 Hz / 3 phases long infeed and outfeed tables, total length approx. 2,600 mm 4-knife cutterblock CENTROFIX system with reversible knives Cedpfx Afszvu Uxsgehc adjustable fence manual chip thickness adjustment via handwheel dust extraction port motor brake GS-tested for dust emissions massive and robust construction The machine is in used condition, which is good considering its age. The surface planer was used as a training machine in a vocational school and is fully functional. The machine is subject to differential taxation. An inspection and demonstration can be arranged by appointment. Transportation is possible for an additional fee! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes reserved. All information without guarantee.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 21017403, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 5,900 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, number of slots in tool magazine: 32, controller manufacturer: BWO 900C, overall weight: 8,000 kg, year of last overhaul: 2024, spindle motor power: 12,500 W, mount diameter: 90 mm, number of spindles: 1, rotational speed (max.): 17,000 rpm, rotational speed (min.): 1,000 rpm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in working order and in use will be available from 01.11.2024 at the earliest .After services and repairs are Vacuum pump, central lubrication, tool magazine, spindle . The machine connected to the network is possible to check and try out. In addition, on the equipment of the machine is a software with a postprocessor for the production of stairs and a laser projector. There is a possibility of training . Codeuyl Npopfx Afgohc

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Chsdpfxozuw Ixo Afgec Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 82,340 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 18,000 rpm, overall weight: 24,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 5, This 5-axis MAKA Moving Beam with 840D was manufactured in 2013. It features a Siemens Sinumerik 840D control unit and a nominal power of 55 kW. With its advanced capabilities, this gantry milling machine is ideal for precision machining tasks. If you are looking to get high-quality milling capabilities, consider the MAKA Moving Beam with 840D machine we have for sale. Contact us for further details. Csdpfxezd Dfvo Afgjhc - 2 units available- Control Unit: Siemens Sinumerik 840D- Number of Axes: 5-Axis (X, Y, Z linear axes and A, C rotary/swivel axes)- Pneumatic Operating Pressure: 6 bar- Control Voltage: 24 V- Nominal Power: 55 kW- Nominal Current: 145 A- Foundation Requirement: Reinforced concrete floor, quality EN 206, load capacity 2500 kg/m²- Workplace Lighting: Hall lighting of 250-500 Lux required- Ambient Operating Temperature: 10-35° Celsius- Operating Voltage: 400 V / 50 Hz AC- Pneumatic Connection Thread: ½"- Pneumatic Supply Line: Clearance width min. 1"- Compressed Air Quality: Drained and cleaned- Compressed Air Consumption: approx. 800 NI/h uncompressed- Noise Protection: Machine completely enclosed in a soundproof booth, interior illuminated. Sound insulation max. 20 dB(A) in medium to high frequency range with booth closed.- Safety Measures: Fully enclosed soundproof cabin, safety bumpers on the front edges of the tables, safety contact strips on the closing edges of the automatic sliding doors, limit switch protection on all sliding and hinged doors, movable partition between the tables.

Condition: repair required (used), Year of construction: 2014, operating hours: 23,000 h, functionality: not functional, machine/vehicle number: 21066714, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: Siemens Sinumerik 840D sl, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D sl Operating hours: 23,000 h EQUIPMENT Chsdpfxjyq Ra Uj Afgsc Swiveling spindle External cooling unit (manufacturer: Pfannenberg) Note: There is a fault in the control system. It does not respond to any inputs. Repair by Siemens Service is required!

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - rigid milling spindle; newly bearing-mounted - with table extension with extendable frame support 2500 mm - motor 5.5 kW - speeds 3000/4500/6000/8000/10000 rpm - milling fence with 2 adjustment options: - full fence - rear outfeed jaws - extraction hoods: 2 x 120 mm - automatic motor brake - clockwise/counter-clockwise rotation - with Haffner feed unit with 4 rollers Chjdpfxezlbpue Afgjc Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 2003, Carriage length: 3000 mm Cutting width at rip fence: 1250 mm Cutting width at cross-cut fence: 2800 mm Cutting depth: 125 mm Scoring unit: no Saw blade height adjustment: handwheel Saw blade tilt adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Cross-cut fence display: scale Saw blade diameter: 400 mm Chodey A Hi Dspfx Afgjc Speeds: 3200 / 4000 / 6000 Motor power: 5.5 kW Motor brake: yes / automatic Extraction port: 80 mm and 125 mm Machine length: 3400 mm Machine width: 1800 mm Weight: 820 kg