Used Maho 700 S for sale (442)

Condition: ready for operation (used), Maho milling table for Maho milling machine MH 700 S, milling table for interchangeable pallets 500x630 mm, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for costs of packing and shipping! Kdedpfjx Dw Iwex Ah Nsg

Condition: ready for operation (used), Maho milling head (Maho milling machine MH 700 S), used, normal signs of wear, 100% fully functional, scope of delivery as per photos. NOTE: Please enquire separately for costs of packing and shipping! Kedpsx Dw Iqjfx Ah Nedg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 77533, feed length X-axis: 700 mm, feed length Y-axis: 500 mm, feed length Z-axis: 600 mm, spindle speed (max.): 6,300 rpm, spindle stroke: 80 mm, TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Spindle stroke: 80 mm Kedpewtq T Ujfx Ah Nedg Spindle speed: 20 - 6300 rpm Feed rate: 1 - 4000 mm/min Rapid traverse X and Z: 12 m/min Rapid traverse Y: 10 m/min Accuracy: 0.001 mm

Condition: ready for operation (used), Year of construction: 1989, Travel X/Y/Z: 700mm/500mm/600mm, speed: 6300rpm, power: approx. 10kW, feed X/Y/Z: 4m/min, rapid traverse X/Y/Z: 10m/8m/10m/min, machine dimensions X/Y/Z: approx. 4500mm/2300mm/2500mm, weight: approx. 6000kg, operating hours: 65425h. On-site inspection is possible. Kedpfewmqxkox Ah Nedg

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Kjdpfxju Idbyj Ah Njdg Equipment: -manual control unit -coolant device -machine ilumination *

Condition: ready for operation (used), Deckel Maho 5100027000 Touch Panel for Deckel Maho CNC 432 control, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Kodpei D Upgofx Ah Nsdg

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Kjdox S Rcmepfx Ah Nodg

Condition: used, total height: 2,400 mm, total width: 1,850 mm, total length: 1,620 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Serial number: 71235 - Drive system: Conventional - Power [kW]: 8.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 400 - Z-axis travel [mm]: 400 Kdsdpfox Npm Ejx Ah Neg - Table length [mm]: 900 - Table width [mm]: 500 - Tool holder: ISO40 - Main spindle power [kW]: 4 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 1620mm x 1850mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1970, functionality: unexamined, MAHO - Universal swivel table Kedpexqpfnsfx Ah Njdg

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Kodpfx Aoxy Stysh Nodg Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Year of construction: 1982, condition: good (used), machine/vehicle number: 75 810, table mounting size: 630 Ø mm Ksdpfx Aoby Hhtoh Nsdg movement x: 600 mm movement y: 450 mm movement z: 500 mm tailstock stroke: von Hand 80 mm spindle taper: ISO 40 spindle turning speed range: 20 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: 4 m/min electrical connection: 380 V kW space needed: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg

Condition: used, NC universal tool milling machine MAHO type MH 700 P with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Horizontal spindle travel 80 mm Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed - Hydro-mechanical tool clamping - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° Kdsdpfx Aowd Szbeh Njg - Pivoting control panel - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Weight approx. 2800 kg Good condition

Condition: used, Year of construction: 1991, x-travel 1200 mm y-travel 600 mm z-travel 600 mm total power requirement 25 kW Kdodpfot Hwqwex Ah Nsg weight of the machine ca. 11,5 t M A H O (Germany) CNC Controlled Bed Type Universal Machining Centre Model MH 1200 S (120012) Year 1991 * Partially reconditioned in Year 2007 by MMD Company _____ Table travel: X axis, longitudinal 1,200 mm Y axis, vertical 600 mm Spindle head Z axis, cross 600 mm Rotary Table size 1,000 x 800 mm Distance between spindle and column, max. 900 mm Spindle taper SK 40 Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm Max. weight of workpiece 1,000 kg Feeds / quick feeds, X, Y and Z Axes 1 – 4,000 / 12,000 mm/min Feeds / quick feeds, B Axis 1 – 1,500° / 10 rpm Spindle drive 15 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 11,500 kg Dimensions of machine 2.75 x 5.10 x height 2.90 / 3.40 m Accessories / Special Features: * MAHO Continuous Path Control, Model CNC 432, for 5 axes, with colour monitor, graphics, and all the usual subprograms and cycles. Mobile manual control unit with RS 232 Interface Entry for external data communication. * CNC rotary table (B Axis) in conjunction with the CNC Controlled swivelling milling head allows machining in 5 axes, Resolution 360.000 ° * Vertical, rotating milling head with hydraulic tool clamping. * Horizontal milling spindle with hydraulic tool clamping. * CNC controlled tool changer with 36 positions. Tool life supervision and tool breakage supervision. With RENISHAW Measuring Probe. * Separate coolant device (no internal coolant supply) * Complete covered working area with sliding doors. * Chip conveyor. Oil cooler for the hydraulic system. Condition : Very good. Can be inspected under Power here in our stock. This is a very stable machine suitable for heavy cuts. It was partially reconditioned in 2007 by MMD Company: geometrically measured, and mechanic and electrics were tested - a beautiful machine for the “ Conaisseur”. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 1991, condition: ready for operation (used), X-axis: 1600mm, Y-axis: 800mm, Z-axis: 800mm, tool holder: ISO 50, speed: 20-4000/min, feed rate: 1-4000mm/min, max. rapid traverse: 10m/min, number of tool positions: 36, max. tool diameter: 160/210mm, max. tool length: 315/400mm, max. tool weight: 15kg, control: Heidenhain iTNC 530, connected load: 40kVA, machine dimensions: 5080mm/36xWxH Tool length: 315/400mm, max. tool weight: 15kg, control: Heidenhain iTNC 530, connected load: 40kVA, machine dimensions (LxWxH): 5080mm/3650mm/2005mm, weight: approx. 16t, documentation available, complete retrofit 2015. Kdedpfsulzk Sox Ah Neg

Year of construction: 1989, condition: ready for operation (used), A Maho CNC 4-axis universal bed-type milling machine is available. Travel X/Y/Z: 1600mm/800mm/800mm, table dimensions X/Y: 1250mm/800mm, max. table load: 3000kg, spindle mount: SK50, main spindle speed: 4000rpm, power: 22kW. Tool positions: 36, max. tool diameter: 160mm/210mm, max. tool length: 315mm/400mm, max. tool weight: 15kg, feed rate: 4m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 5000mm/3700mm/3000mm, weight: approx. 16000kg, control: Philips CNC 232. An on-site inspection is possible. Ksdpfx Ahjv Ubqne Nodg

Year of construction: 2001, condition: used, Technical details: Kdjdpfx Asikbtnoh Nsg x-travel: 400 mm y-travel: 300 mm z-travel: 500 mm table clamping surface:: 400 x 300 mm table load: 50 kg semi-automatic operated: LASERSOFT 3D laser capacity: 100 W total power requirement: 27 kVA weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 3,5 x 2,8 m CNC engraving/texturing/labeling/contouring-laser maschine, approx. 9.000h "machine on", approx. 5.500h "laser on" *

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre. Contact us for more information. Additional equipment • Tool Changer & Magazine: Horizontal Double Gripper / Magazine Type: Chain Magazine / Capacity: 60 Tool Places / Tool Clamping: According to DIN 69872 / Tool Breakage Control: Mechanical Version • Coolant Tank: 900 L • IKZ: Form AD with Paper Band Filter • Measuring Probe: Heidenhain TS 641 (Infrared) • Tool Measurement: Blum Laser for Tool Length & Diameter Measurement Horizontal/Vertical • Rotating Viewing Window Machine Benefits Technical Machine Benefits • Production hours: 54347 operating hours, 3500 spindle hours Kdodpfsyaam Ajx Ah Nog • Universal milling head with controlled b-axis • Very well maintained machine operated for high-end applications • Spindle replacement in 2021 at a cost of approximately 40000 euros • Checkbook maintained Extra Information Disc changer and 4 pallets are included Control 3D Haidenhein contouring control "Millplus IT with Millplus IT handwheel" Serviced regularly... excellent condition... new spindle has 3,500 hours

Condition: used, Year of construction: 2000, x-travel 700 mm y-travel 450 mm z-travel 500 mm Kdodpfx Ahex U A Sxe Nsg Control Phillips 432 diameter Drehtisch 600 mm total power requirement 40 kW

Condition: used, Year of construction: 1988, Control Grundig x-travel 700 mm y-travel 500 mm z-travel 400 mm weight of the machine ca. 2,8 t Kdedpfx Aheiqu S Es Nog +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2013, x-travel 835 mm y-travel 510 mm z-travel 510 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min feed power 5.000 N total power requirement 28 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,8 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 40.108h operating hours, 12.656h spindle hours - incl. Lehmannn 4th Axis - incl. Lehmann tailstock - incl. 20x SK 40 tools Kdsdpfx Ahox R Enue Njg

Condition: used, Year of construction: 2013, x-travel 835 mm y-travel 510 mm z-travel 510 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min Kodox R Ennspfx Ah Nsdg feed power 5.000 N total power requirement 28 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,8 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 33.796h operating hours, 10.411h spindle hours - incl. 20x SK 40 tools

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain Kdjdpfx Ahjx R Em Do Nog turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C -Type: KDS 1.1-50-300-W1 MOD 4/1X108-091 -Quantity: 1x servo controller available -Dimension: 490/110/H390 mm -Weight: 15 kg Kodeq T T Npjpfx Ah Njdg

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: MAHO, Tool changer from CNC machining center MAHO MH 800C -for: max. 24 shots -Recording: SK Kjdpfjq Tvp Uox Ah Njdg -Dimensions: 1200/410/H480 mm -Town weight: 106 kg

Condition: used, Pressure reducer, pressure regulator, bladder accumulator, high pressure bladder accumulator, hydraulic accumulator, pressure accumulator, membrane accumulator Ksdpfx Ahoq T T Nts Nodg -Manufacturer: Hydac, pressure accumulator from CNC machining center MAHO MH 800C -Type: SBO140-1.4E1/112U-140FT080 -Operating pressure: max. 140 bar -Quantity: 2x pressure storage available -Price per piece -Dimensions: Ø 145 x 205 mm -Weight: 3.7 kg