Used Lead Cartridge for sale (1,753)

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg Pjdpfsu Aftgjx Ahvjgi >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev Podpsvtp Edsfx Ahvsgi >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws Psdpfsvivmyox Ahvsgi >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching Podpfx Aexcuazshvsgi >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Precision Lathe Model Condor 81 Lead and Feed Spindle Lathe with 3-Axis Digital Display from K&C NEW Technical Data: >> Year of manufacture 1987 Machine No. 87 835 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral-Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable Psdswrmuxepfx Ahvegi >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis digital display from K&C new, 12 months manufacturer's warranty with operating manual Functions: Switch mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeroing, reversing of count direction >> 1 piece 3-jaw chuck 160 mm NEW, 2 sets of jaws >> 1 piece 4-jaw chuck 160 mm, 1 set of jaws >> Collet equipment and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: A used Weiler Condor 81 in very good condition is offered. The machine is, of course, fully functional and has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine on site under power.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake Pgodpfxsw Nw Dqe Ahvoi About the machine: We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: good (used), Lead and feed screw lathe WEILER PRAKTIKANT 800 R - Swing diameter over bed: 300 mm - Swing diameter over cross slide: 150 mm - Turning length: 800 mm - Spindle bore: 42 mm - Speed range: 40 - 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric / inch etc. - Tailstock Morse taper 3 - Three-jaw chuck Pjdpfx Aex A Uktjhvegi - Chip guard rear wall + work light - Chip tray - Change gears - Tool cabinet - Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750 kg Errors and input mistakes excepted

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Dimensions and weights: Length (product): approx.1760mm Width/depth (product): approx.745mm Height (product): approx.1320mm Weight (net): approx.469kg Max. height (product): approx.1590 (DPA)mm Working ranges: Center height: 165mm Center width: 1000mm Rotation diameter over machine bed: 330mm Swing diameter over cross slide: 216mm Bed width: 190mm Speed range: Number of speed ranges: 9 steps Pgodpfeq T R Aaex Ahvei Speed range: 65 - 2000min¯¹ Electrical data: Drive motor power: 1.5kW Supply voltage: 400V Mains frequency: 50Hz Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 4 Spindle bore/bar passage: Diameter 38mm Steel holder max. mounting height: 16mm Spindle cone: MK 5 Tailstock: Tailstock holder:MK 3 Tailstock quill stroke: 100mm Tailstock quill diameter: 38mm Pitch: Pitch metric: 0.4 - 10mm/rev Number of leads metric: 29 Pitch inch: 56 - 4Gg/1" Travel distance: Top slide travel: 90mm Travel of face slide: 168mm Bed slide travel: 850mm Feed rate: Feed range longitudinal:0.02 - 0.4mm/rev Number of longitudinal feeds: 24 Feed range flat: 0.01 - 0.2mm/rev Number of feeds flat: 32

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.3265mm Pgedpfoq Ukbpjx Ahvei Width/depth (product): approx.1065mm Height (product): approx.1550mm Weight (net): approx.1965kg Working ranges: Center height: 230mm Center width: 2060mm Circumferential diameter over machine bed: 460mm Circumferential diameter in the bed bridge: 690mm Swing diameter over cross slide: 270mm Turning length in the bed bridge: 240mm Bed width: 300mm Speed range: Number of speed ranges: 12 Speed range: 25 - 2000min¯¹ Electrical data: Power drive motor5.5kW Supply voltage400V Mains frequency50Hz Cooling lubricant system Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar passage diameter: 58mm Steel holder max. mounting height: 25mm Spindle cone: MK 6 Tailstock: Tailstock holder: MK 4 Tailstock quill stroke: 130mm Tailstock quill diameter: 60mm Pitch: Pitch metric:0.1 - 14mm/rev Number of leads metric: 41 Pitch inch: 112 - 2Gg/1" Number of pitches inch:41 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches:34 Travel distance: Top slide travel: 125mm Travel of face slide: 285mm Bed slide travel: 1805mm Feed rate: Feed range longitudinal: 0.031 - 1.7mm/rev Number of longitudinal feeds: 42 Feed range flat: 0.014 - 0.784mm/rev Number of feeds flat: 42 Electrical connection: Total connected load: 5.8kW

Condition: good (used), VOEST DA 360 – Lead and Feed Screw Lathe -Heidenhain digital readout -Center height over bed: 400 mm -Swing diameter over bed: 800 mm -Swing diameter over cross slide: 500 mm -Turning length: 1,000 mm -Spindle bore approx. 87 mm -Speed range: 14 – 1,000 rpm / 18 speeds -Automatic longitudinal and cross feeds -Automatic Z-axis infeed Pgedpfxsx Auldo Ahvji -Tailstock Morse taper 5 -3-jaw wedge-type chuck 250 mm -Multifix base holder with insert -Work lamp -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3,500 kg Subject to errors or input mistakes.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, Control: Siemens 828 D General Pgjdpfx Ahjx Ahdtjvei Speed: 3,000 rpm Power: 9 kW Torque: 140 Nm Chuck diameter: 210 mm (max. 260 mm) Spindle bore: 65 mm Spindle nose: A2-6'' Working area Distance between centers: 1,000 mm Center height: 215 mm Swing over bed: 430 mm Swing over slide: 200 mm Travel Z-axis: 1,065 mm Travel X-axis: 220 mm Tooling system Turret: PARAT 4-position turret head RD 2 Tailstock Technology: dragged Centre point: MT-4 (live) Equipment Chip management: chip tray Coolant supply: coolant pump 5 bar Jaw set: 1 set of hardened jaws

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Pjdpfxexz Edze Ahvsgi

Condition: refurbished (used), Year of construction: 1981, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 52 mm, turning diameter: 420 mm, center height: 210 mm, turning length: 1,000 mm, total length: 2,300 mm, total width: 1,300 mm, total height: 1,700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 33 rpm, quill mount: MK 4, Machine Equipment / Highlights Heidenhain ND 780 digital position display Röhm 3-jaw chuck, Ø 250 mm Multifix quick-change tool holder Coolant system for efficient machining Pjdjxqpwkjpfx Ahvegi Chuck guard for increased safety Chip guard rear wall for a clean working environment Year of manufacture: 1981

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE-compliant! Technical data: Year of manufacture: 2006 Pgedpfsxyvbnex Ahvoi EMCO EMCOMAT 14 D Technical Data Working Area Travel distance in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4,000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MK 2 Quill stroke: 80 mm Dimensions (LxWxH): 1,280 x 730 x 1,480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest demands: with stepless speed control, constant cutting speed, and a robust 7.5 kW drive power (40% duty cycle). The compact machine with outstanding performance is ideal wherever maximum precision in limited space is required, such as optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a lathe EMCO EMCOMAT 14 D with Emco digital readout, manufactured in 2006. This lathe is in excellent original condition. It was only used occasionally in special production. The control system is very user-friendly. The guides are regularly lubricated by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. You are welcome to inspect and test the EMCO EMCOMAT 14 D under power at our premises. You will find further lathes from renowned manufacturers on our website.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with EMCO digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special construction department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Pgodpfsxyvbbjx Ahvoi Quill diameter: 30 mm Inner taper: MT 2 Quill stroke: 80 mm Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the Machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest standards: with infinitely variable speed control, constant cutting speed, and a robust 7.5 kW drive (40% duty cycle). This compact powerhouse excels wherever maximum precision is required in limited space, such as in optical, electrical, and automotive workshops, laboratories, and even in Formula 1. For sale is an EMCO EMCOMAT 14 D lathe with EMCO digital readout, year of manufacture 2006. This lathe is in excellent original condition. It comes from a facility where it was only lightly used for special construction purposes. It features an extremely user-friendly control. The ways are regularly lubricated by the central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power on-site. You will find more lathes from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Pgsdpfsxyvaqsx Ahvji Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 1,350 mm, spindle bore: 120 mm, turning diameter over bed slide: 1,000 mm, center height: 675 mm, turning length: 5,000 mm, Heavy-duty lathes POREBA - Lathes after general overhaul Center height mm 675 Rotation Ø over bed mm 1350 Rotation Ø over bed slide mm 1000 Rotation Ø in the offset mm 1600 Length of offset A1-15/DIN 55027 mm 220 Center distance mm 5000 Spindle bore mm 120 Taper in main spindle metric 130 Front spindle bearing mm 220 Spindle mount Standard / fixing screws M22 ISO-702/I A1-15 Option DIN 55027/15 Max. Workpiece weight - between centers: kg 9000 - with 2 steady rests: kg 15000 - overhung: kg 2000 Bed width mm 660 Turning tool cross-section (HxW) mm 32 x 40 SPEEDS mechanical 18 speed levels Main motor power: kW 45 Number of steps: 18 Speed range: rpm 10-500 rpm or 12.5-630 rpm RIDING STOCK Quill diameter mm 190 Quill stroke mm 300 Cross adjustment mm +/- 15 ADJUSTMENT Number of steps 70 Range of longitudinal feeds mm/rev 0.07 - 10 Range of face feeds mm/rev 0.035 - 5 Feed range of the top slide mm/rev 0.017 - 2.5 Rapid traverse lengthwise mm/min 4000 Pedpfx Ahohmuuyjvegi Rapid traverse flat mm/min 2000

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025-09/2404095, turning diameter over cross slide: 224 mm, spindle bore: 51 mm, center height: 180 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,680 mm, total height: 1,400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 224 mm Swing diameter without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. turning tool cross section: 16x16 mm Chuck mounting: D1 - 4 Spindle mounting (lathe spindle): MT 6 Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of speed ranges: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Metric thread pitch: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Quill mounting: MT 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Electrical connection: 400/50 V/Hz Total length: 1680 mm Psdjxykafopfx Ahvogi Total height: 1400 mm Weight: 520 kg Standard accessories: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw faceplate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MT 3 - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial and change gear set - Halogen machine lamp - Emergency stop button / No-voltage release - Chuck guard with safety switch - Machine base / chip tray / splash guard - Tool kit / operating manual / CE

Condition: good (used), Year of construction: 2000, machine/vehicle number: 8073, Offer 25432 Technical specifications: - Swing diameter: 320 mm - Distance between centers: 750 mm - Maximum turning diameter over bed: 550 mm - Maximum turning diameter over cross slide: 175 mm Pgjdpfx Asxx Sp Ejhvsi - Spindle bore: 32 mm - Spindle mount: - Tailstock quill taper: MT 3 - Quill stroke: 180 mm - 18 spindle speeds: 85 - 2000 rpm - Longitudinal and cross feeds - Metric thread pitches - Imperial thread pitches - Module threads - Diametral pitch threads - Quick-change tool post - Chuck - Steady rest - Drive: 400 V / 2.2 kW - Required space (approx.): W 2100 x D 750 x H 1300 mm - Weight (approx.): 750 kg

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe FAT Poland Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout Pedpfsxxm A Hex Ahvogi 3-jaw chuck Tool holder Steadies Live centre

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 6970-06, turning diameter: 480 mm, turning diameter over top slide: 240 mm, center height: 240 mm, turning length: 1,000 mm, spindle speed (max.): 2,240 rpm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Submitting a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Turning diameter: 480 mm Swing diameter over cross slide: 240 mm Turning length: 1,000 mm Spindle bore: approx. 63 mm Spindle speed: 11–2,240 rpm Centre height above bed: 240 mm Centre height above carriage: 140 mm Turning diameter over carriage: 240 mm MACHINE DETAILS Electrical Data Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,200 x 1,800 mm Weight: 3,000 kg Psdjxm Sizepfx Ahvjgi EQUIPMENT Tailstock Steady rest Toolpost Four-jaw chuck, diameter 250 mm Three-jaw chuck, diameter 250 mm Three-axis digital readout Various tool holders Centres Taper

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 35 rpm, bed width: 250 mm, - Demonstration machine - - Handwheel on the left of the support - with 3-axis digital display FAGOR INNOVA30iT Pgodpfxowrndzo Ahvji (Art. No. 103877) * For more information on the exact standard equipment and available options, visit us online or call us directly *

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, bed width: 250 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 35 rpm, quill mount: MK 3, Equipment: rotational speed infinitely variable, - Demonstration machine - - Handwheel on the left of the support - with steplessly variable spindle speeds and 3-axis digital display FAGOR INNOVA30iT (Art. No. 103878) * For more information on the exact standard equipment and available options, visit us online or call us directly * Pgjdpfewrngcsx Ahvji

Condition: good (used), Year of construction: 2003, functionality: fully functional, Lathe Format MD 180 VS Turning capacity: 360 x 1000 mm Spindle speeds: 35 - 2500 rpm via 2 gearbox stages, infinitely variable Spindle bore: 42 mm 3-jaw chuck steel Röhm 200 NEW 4-jaw chuck steel Röhm 200 used Live center, keyless drill chuck, Multifix B with 4 holders, machine feet. Tailstock: Morse Taper 3 Safety features: electrically monitored chuck guard, power-on protection, spindle brake, emergency stop, splash guard, covered leadscrew, CE marked. Condition: Good, smooth running and good guides, all functions OK. Dimensions: L 2.05m x W 0.92m x H 1.37m; Weight approx. 1.1 t Inspection under power possible without obligation Pgodpfxoxvk Sye Ahvsi Free loaded, D - 88433 Schemmerhofen.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 308888, turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter over bed slide: 300 mm, turning length: 1,000 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 40 rpm, Turning diameter in gap: 480 mm, tailstock quill diameter: 42 mm, tailstock quill stroke: 110 mm, - With ACU-RITE manufacturer digital display - With tailstock, Multifix quick-change tool holder, and three-jaw chuck (Ø 150 mm) - Width in front of faceplate: 115 mm - Lead screw diameter: 28 mm - Thread: 6 mm - Feed (16 metric): 0.03 – 2 mm/rev - Cross slide width: 140 mm – travel: 190 mm - Top slide width: 82 mm – travel: 92 mm - Tool holder: 16 x 20 mm Pgsdewxratopfx Ahvei