Lead/traction spindle lathe

WEILER Condor

Condition: used, L + Z Lathe WEILER Type Condor 81 A Mach. No. 36553 Year of manufacture approx. 1985 Centre distance 750 mm Swing over bed 330 mm Centre height over bed 165 mm Swing over cross slide 180 mm Centre height over cross slide 90 mm Spindle bore 40 mm Chuck mounting: Short taper DIN 55027 size 5 Tailstock quill taper MK 3 Quill travel 110 mm Spindle speed 45 - 2800 rpm, 16 steps Drive power 3 kW Power supply 400 Volt, 50 Hz - Spindle speed through 16 gear steps - 3-jaw chuck Ø 160 mm RÖHM with hard and soft jaws - Multifix quick-change tool post size B with 3 holders - Automatic longitudinal and cross feed - Electro-mechanical spindle brake - Emergency stop - Coolant tank with pump integrated in the machine base, without feed hose to working area - Hinged chuck guard - Splash guard - 1 live center - Electric diagram and operating manual Space requirements L x W x H 1850 x 950 x 1400 mm Weight 1100 kg Good condition Gijdpfek S Ht Ajx Ahvsp

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle bore 40 mm Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Giodpfxsvgmbvj Ahvsp Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard - splash guard Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Rotating center point

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout from Training Workshop Technical Data: >> Year of manufacture: 1991, Machine No.: 91-1624 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Spindle brake >> Weight approx. 1100 kg >> Spindle brake engageable >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. 3-jaw chuck with wedge bars and 1 set of jaws >> Tool holder with 7 tool pockets >> Bed stop Giedpfx Aheym Srqovep >> Machine mounts >> Drill chuck >> Live center >> Coolant system About the Machine: Offered here is a used Weiler Condor B lathe, year 1991, in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The Weiler comes from a training workshop and has been very well-maintained. The 3-axis Heidenhain digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our site.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout from a Training Workshop Technical Data: >> Year of manufacture: 1987 / Machine No.: 87-674 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread cutting capability: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Spindle brake >> Weight: approx. 1,100 kg >> Switchable spindle brake >> Dimensions (LxHxD): 1.83 m x 1.29 m x 0.88 m Included Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. 3-jaw chuck with one set of jaws (wedge type) >> Quick collet change system with collets from 1–29 mm in 0.5 mm increments >> Toolholder with 7 tool pockets >> Bed stop >> Machine feet >> Drill chuck >> Live centre >> Coolant system About the Machine: Offered here is a used Weiler Condor 81 lathe, year 1987, in very good condition. The machine is, of course, fully functional. It is a very robust and powerful machine. Coming from a training workshop, the Weiler is extremely well maintained. The 3-axis Heidenhain digital readout allows for easier and more precise operation. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on site. Gedpfx Ajym Slwjhvsip

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Gisdpemdn Dxofx Ahvjp

Condition: ready for operation (used), functionality: fully functional, turning diameter: 300 mm, center height: 150 mm, spindle speed (max.): 2,800 rpm, overall weight: 1,030 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified period: either between 11/05/2026 and 13/05/2026, or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: approx. 300 mm Swing diameter over cross slide: 200 mm Centre height over cross slide: 100 mm Centre height over bed: 150 mm Centre distance: 750 mm Spindle bore: approx. 35 mm Spindle speed: 40 – 2,800 rpm MACHINE DETAILS Operating voltage: 380 V Connected load: 3 kW Rated current: 25 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 1,860 x 700 x 1,800 mm Weight: 1,030 kg EQUIPMENT Tailstock Multifix Type B toolholder Gijdeym N Aaepfx Ahvjp 3-jaw chuck (diameter: 160 mm) 2-axis digital readout by RSF External reference: Mahle

Condition: ready for operation (used), functionality: fully functional, turning diameter: 340 mm, center height: 170 mm, spindle speed (max.): 2,800 rpm, overall weight: 800 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Godpfx Asym Nz Njhvjip Swing diameter over bed: 340 mm Center height over support: 100 mm Swing diameter over support: approx. 200 mm Distance between centers: 750 mm Center height over bed: 170 mm Spindle speed: 12 – 2,800 rpm Spindle bore: approx. 38 mm MACHINE DETAILS Operating voltage: 380 V Control voltage: 220 V Connected load: 3 kW Rated current: 6.25 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 1,700 x 650 x 1,500 mm Weight: 800 kg EQUIPMENT Tailstock Multifix tool holder RÖHM three-jaw chuck (Ø 160 mm) External Reference: Mahle

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry Gisdpfx Ahovr Eh Eovop • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Weiler Centre Lathe Model Condor B, Leadscrew and Feed Shaft Lathe with 3-Axis Heidenhain Digital Readout from Training Workshop Technical Data: >> Year of manufacture: 1990, Machine no. 90-1419 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Spindle brake >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Godpfxsym Dcze Ahvsip Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pcs 3-jaw scroll chuck with 1 set of jaws >> Toolpost with 7 tool holders >> Bed stop >> Machine mounts >> Drill chuck >> Live center >> Coolant system About the machine: Offered here is a used Weiler Condor B lathe, year of manufacture 1990, in very good condition. The machine is of course fully functional. A very sturdy and powerful machine. The Weiler comes from a training workshop and is very well maintained. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us, and a full oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 1900 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts - in checked conditions - machinenvideo - ?v=GDoJ0Z7Dckw Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) Giodjxmaktspfx Ahvop - Chip splash guard rear panel - 1x empty tool cabinet - EMERGENCY stop button - Operating instructions

Condition: used, Year of construction: 2007, machine/vehicle number: 1056795, functionality: fully functional, operating hours: 13,432 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, number of slots in tool magazine: 24, controller manufacturer: Haas, overall weight: 6,000 kg, controller model: Haas, coolant supply: 20 bar, feed rate X-axis: 21 m/min, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, Hello,\n\nDue to business closure, the entire company is being sold.\n\nMachines are in good condition, and tools can be negotiated. Gsdpjwccpaefx Ahvjip

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1324, spindle bore: 42 mm, total length: 2,000 mm, total width: 1,000 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, WEILER CONDOR B Lead and Feed Screw Lathe - Operating voltage: 380 V - Control voltage: 220 V - Connection: 3 kW - Rated current: 25 A - Frequency: 50 Hz - Centre distance: approx. 700 mm - Centre height over bed: 170 mm - Swing over bed: 340 mm Giodpfeyiztijx Ahvop - Centre height over cross slide: 100 mm - Swing over cross slide: 200 mm The machine is equipped with a tailstock, a Multifix tool holder, type B, as well as a 3-jaw chuck by RÖHM, diameter: 150 mm. Additionally, it features a digital readout by ELESTA, model: VISULESTA 4, including a matching workshop drawer cabinet with suitable accessories for the machine. FCA D-73235 Weilheim Teck – loaded onto truck

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light - Bed stop Gjdpfx Ahovadqzjvoip - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale.

Condition: excellent (used), Year of construction: 2015, Heidenhain TNC 620 V2 control system Travel X/Y/Z: 760/480/480 mm Speed: 12,000 rpm Tool magazine for 24 SK40 tools Table size: 900 x 410 mm Gijdpfx Ajv Rr Hxehvsp Chip conveyor Automation / Robot

Condition: ready for operation (used), Two lead and feed screw lathes by Weiler are available. 1) Weiler Condor VS-2, distance between centers: 800mm, center height: 155mm, swing diameter over bed/cross slide: 330mm/160mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1900mm/900mm/1500mm. 2) Weiler Praktikant M, distance between centers: 650mm, center height: 160mm, swing diameter over bed/cross slide: 320mm/175mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/1700mm, weight: approx. 700kg. Both machines show isolated individual functional limitations, but are operational. Documentation available. On-site inspection is possible. Giodpoydp Ahjfx Ahvsp