Used Lathe With Digital Display for sale (17,187)

Condition: refurbished (used), A06B-6117-H211, refurbished and tested. Dsdpfxozi St Ej Ac Heci

Condition: refurbished (used), A06B-6079-H206#EM FANUC, refurbished and tested. Dcedpjzi Sqkofx Ac Hji

Condition: refurbished (used), A06B-6096-H105 FANUC, refurbished and tested. Dcodpfxjzi Spts Ac Hji

Condition: refurbished (used), A06B-6097-H203 FANUC, refurbished and tested. Dcodszi Spaopfx Ac Hoi

Condition: refurbished (used), A06B-6096-H208 FANUC, refurbished and tested. Dcjdpfxjzi Snve Ac Hoi

Condition: new, Year of construction: 2026, functionality: fully functional, Details Condition : New Control Unit : OSAI Linear Motion System : PMI Automatic Centering : PYNOMATIC SYSTEM SMC Djdpszi Smrsfx Ac Heci Spindle Motor : ELTE Spindle Motor 7,5 kW MAX. Part Width :1200 X 1000 mm | MAX Part Height 600 mm Engine Power : 24kW Z Axis Weight Balancing Systm: Ø50 Pneumatic Cylinder B Axis : Infinite Movement C Axis : Axis Rotation Range ± 400 X Axis : Speed 40.000 mm/min Y-V Axis : Speed 40.000 mm/min Z Axis : Speed 40.000 mm/min Z Axis : OSAI 1.8 kW Servo Motor With Absolute Encoder and Brake X Axis : OSAI 1.3 kW Servo Motor With Absolute Encoder Y Axis : OSAI 1,3 kW Servo Motor With Absolute Encoder V Axis : OSAI 1,3 kW Servo Motor With Absolute Encoder A Axis : OSAI 1,3 kW Servo Motor With Absolute Encoder C Axis : OSAI 1,3 kW Servo Motor With Absolute Encoder

Condition: refurbished (used), A06B-6087-H126 FANUC power supply module, 106A, 29.8 kW. Dcsdpfszi Sncjx Ac Hsi

Condition: used, axle configuration: 3 axles, first registration: 02/2009, loading space length: 13,340 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, suspension: air, tire size: 385/65, tire condition: 30 %, color: other, Year of construction: 2009, Equipment: ABS, = Additional options and accessories = - Air Suspension - Cooling Engine - Disc brakes = More information = Tyre size: 385/65 Make axles: SAF Dcodpszi Sh Nefx Ac Hsi Tyre profile: 30% Brakes: disc brakes Suspension: air suspension

Condition: used, Year of construction: 2016, operating hours: 18,071 h, functionality: fully functional, machine/vehicle number: 06960000941, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, rapid traverse Y-axis: 30 m/min, torque: 280 Nm, input voltage: 400 V, overall weight: 6,000 kg, power: 25 kW (33.99 HP), input frequency: 50 Hz, controller manufacturer: Siemens, controller model: Sinumerik 849D sl, input current: 63 A, tool type: VDI 40, number of axes: 3, DMG MORI CTV 250, 2nd Generation – Vertical Turning Center (Pick-up), Year of Manufacture 2016 For sale is a well-maintained DMG MORI (Gildemeister) CTV 250, 2nd Generation, manufactured in 2016, with only 18,071 spindle hours. The machine is fully equipped for automated series production of chucked parts and is currently still powered on – inspection and demonstration possible by arrangement. Control System & Drive Siemens Sinumerik 840D sl (Slimline) including ShopTurn option AC main drive 25 / 32 kW, torque 280 / 360 Nm Dcsdpfxozi R R No Ac Hoi Spindle speed up to 5,000 rpm, duty cycle 100 % / 40 % Hollow cylinder, programmable clamping pressure via NC program Axes & Tools 12-station turret (disc diameter 340 mm), all stations powered (UDI 40) C-axis with powered tool system Y-axis +90 / -65 mm Linear guides, ball screws, glass scales, AC servomotors with absolute encoder Rapid traverse 30 m/min Automation & Metrology Workpiece transport system SRA 160 (drag chain, NC-controlled) including drag chain set Storage capacity: 30 parts (Ø 30–70 mm, max. 7 kg) or 18 parts (Ø 30–100 mm, max. 15 kg), max. total weight 320 kg including pallets Workpiece diameter 30–160 mm, workpiece height max. 160 mm Robot interface Profinet (electrical interface for 6-axis robot) Workpiece probe Renishaw LP2DD at the loading/unloading station, measuring accuracy 10 µm, with air blow cleaning Coolant & Peripherals Coolant system 8 / 20 bar, tank 600 l, high-pressure pump 20 bar / 40 l/min Coolant supply via turret disc to all stations Band filter system 40 µm with forced indexing, coolant level monitoring Hinged belt chip conveyor with extended discharge chute (+300 mm), enlarged chip container, modified sludge pump Aluminum machining package Integrated work area extraction max. 400 m³/h, work area flushing with 3 flushing nozzles Cabinet cooling up to 40 °C, hydraulic oil cooler Air blower via main spindle, 4-color signal light Remote diagnostics via the internet Connection values: 400 V / 50 Hz, 40 kVA, 63 A · Weight: approx. 6,000 kg Sale from current location, dismantling/loading/transport by arrangement or by the buyer. Sale is subject to the exclusion of all warranties (commercial sale of used machines, sold as seen). Please contact us if you have any questions or would like to arrange a viewing.

Condition: used, Year of construction: 2013, functionality: fully functional, The Tsugami B0385L is a powerful, CNC-controlled long-bed lathe (Swiss type) with the following special equipment: - Dust extraction system - Fire protection system - Chip conveyor Technical data: - General overhaul 2020 Main and counter spindle • Max. machining diameter: Ø 38 mm • Bar capacity: Ø 8 mm to Ø 38 mm • Max. turning length: 100 mm (without guide bushing) • Max. turning length with guide bushing: 300 mm • Main spindle speed: 200 – 6,000 min⁻¹ • Counter spindle speed: 200 – 6,000 min⁻¹ • Main spindle motor power: 7.5 / 11 kW • Counter spindle motor power: 3.7 / 5.5 kW Tool holders and axes Dcedpfx Aezi R Nfoc Hji • Total number of tool positions: 21 (standard) • Driven tools (cross-working): 200 – 5,000 min⁻¹ (power approx. 1.0 to 1.4 kW) • Tool shank size: 20 x 20 mm • Rapid traverse speeds: 32 m/min Control system: Fanuc 0i-TD Machining capacities (maximum values) • Max. drilling diameter (main spindle): Ø 13 mm • Max. threading (main spindle): M12 • Max. drilling diameter (counter spindle): Ø 12 mm • Max. drilling diameter (cross tool): Ø 10 mm Dimensions and weight • Machine dimensions (W x D x H): approx. 2,520–2,770 mm x 1,345–1,515 mm x 1,970–2,050 mm • Weight: approx. 4,600 kg

Condition: good (used), ZMM SLIVEN CU 400 Control and lead screw lathe Distance between centers 1,500 mm Distance between centers 250 mm Turning diameter over bed 500 mm Turning diameter over slide 240 mm Spindle bore 72 mm 27 spindle speeds from 20-2,000 rpm Feed rate Y-axis 0.04-12 mm/rev Feed rate X-axis 0.02-6 mm/rev Travel X-axis 315 mm Motor power 7.5 kW Machine weight approx. 3,000 kg Dodpszi Nz Tefx Ac Hsci Equipment: Digital display MITUTOYO Tool holder 6 tool holder inserts 3-jaw chuck 250 mm All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories explicitly listed here, in the order confirmation, and on the invoice. FCA (Free on Truck) D-32457 Porta Westfalica Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon completion of purchase

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) Dsdoxb U Txepfx Ac Hsci -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: used, Automatic bar feeder Dcedpfjx Trztjx Ac Hei

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Dcsdpfx Aoxddvnjc Hsi Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: good (used), Year of construction: 1998, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1700 x 1010 mm CNC turning machine Loading magazine: LNS Tryton 112 MAIN SPINDLE - Max. bar diameter: 10 [mm] Dcsdpjzhxk Ijfx Ac Hsi - Travel: 66 [mm] - Spindle speed: 16,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] COUNTER SPINDLE - Max. bar diameter: 10 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: good (used), Year of construction: 2003, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1,7 x 1 x 2 m CNC turning machine Dodpfx Acszhxkzj Hjci Loading magazine: LNS Tryton 112 --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: good (used), Year of construction: 2000, control FANUC weight of the machine ca. 1,5 t Dcjdpfx Acezhxkue Hoi dimensions of the machine ca. 1,7 x 1,0 x 2 m CNC turning machine Loading magazine: LNS Tryton 112 --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: used, Year of construction: 2009, faceplate diameter 1250 mm turning height 1250 mm Control 0i-TD Fanuc max. torque at faceplate 12500 Nm max. turning diameter 1600 mm Dsdpfx Aozhxi Rsc Heci max. workpiece weight 5000 kg table speed 2- 300 min/-1 x-axis 1475 mm z-axis 900 mm rapid traverse 10 m/min spindle cone ISO BT50 tool capacity 12 pos. total power requirement 75 kW weight of the machine ca. 32 t dimensions of the machine ca. 4,7 x 5,8 x 5,5 m CNC vertical lathe with 12 positions ATC. Spindle reception is BT 50. Control: Fanuc 0i-TD

Condition: not inspected (used), Max dia 180 mm Max worklength 490 mm Diametre of spindle bore 60 mm Djdpozi Hrvofx Ac Hoci Digital screen * Power needed 39 kW Long 2800 mm Wide 2130 mm Height 2090 mm Weight 4500 kg ACCESORIES * Coolant pump 1,5/5 bar-125 L

Condition: used, Year of construction: 1986, Available immediately from a workshop for disabled workers: L & Z lathe, Imatec Type ID 175 Year of manufacture: 1986 Center height: 175 mm Diameter over bed: 350 mm Diameter over carriage: 210 mm Distance between centers: 1000 mm Spindle bore: 41 mm Spindle speeds: 35.5 – 1600 rpm Digital display Chuck Faceplate Dcjdpszi Hq Ejfx Ac Hsi Multifix system with holders Coolant system Drive power: 3 kW Weight: 1700 kg Price: EUR 2,250.00 plus VAT, ex works.

Condition: used, Year of construction: 1981, Immediately available from a workshop for disabled workers: L & Z lathe VDF Dcsdpfxjzi Hqxs Ac Hji Type D 480 / 1000 Year of manufacture 1981 Center height 240 mm Diameter over bed 480 mm Diameter over cross slide 320 mm Spindle bore 60 mm Distance between centers 1000 mm Spindle speeds 11.2 - 2240 rpm Drive power 7.5 kW Digital display Chuck Tool holder Coolant system Weight 2.5 tons

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Pinacho Lathe Type SE 200 Year 2023 Fagor CNC Made in Spain Includes Tooling Includes Goggles Dcjdszhw D Topfx Ac Hsi Machine is like new; it has only 200 hours of use Exact Model: Pinacho SE 200-42 Ax1000/S1 Key Features: ✔ Only 200 hours of use ✔ Virtually new

Condition: used, functionality: fully functional, clearance 88mm diameter of rotation without chuck 1000mm with chuck 700mm machine dimensions: l2500mm x w1400mm x h1540 Dodpfx Aozi Hklsc Hjci rpm 11.2 / 1000rpm automatic feed on X and Z axis

Condition: used, functionality: fully functional, Swing diameter over bed: Ø 450 mm Swing diameter over carriage: Ø 280 mm Max. swing diameter: Ø 280 mm Turning length: 450 mm Distance between centers: 450 mm Speed range: stepless variable, approx. 50 – 5000 rpm Turret: 1x 8 tool positions 1x 12 tool positions Tool system: VDI-30 Travels: X-axis travel: 120 + 25 mm Z-axis travel: 450 mm Rapid traverse: 12 m/min Motors & Electrical: Spindle motor: approx. 5.5 / 7.5 kW (continuous / 30 min) Total connected load: 29 kVA Power supply: 380V, 3-phase, 50 Hz Full load current: 44 A Weight & Dimensions: Machine weight: approx. 4,800 kg Dimensions (L×W×H): 2,985 × 1,720 × 1,850 mm Djdpfxozi Hh Ds Ac Hsci

Condition: good (used), Year of construction: 2011, 850mm Swing, 525mm Max Cutting Diameter, 1310mm max turning length, 10 Station Turret, Djdpfx Aezhwghjc Hjci 102mm bar capacity, 2800rpm 22kW Spindle, Fanuc I series, 3 jaw chuck, Low Volt Light, Tailstock,