Conventional lathes

Unknown KART EMU-250

Condition: good (used), cutting range round steel at 45°: 250 mm, cutting range round steel at 90°: 280 mm, cutting height (max.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity 45º: 250 mm round 250 mm square Saw speed: 40/80 mtr.min. Sawbelt: 3.320 x 27 x 0,9 mm Saw angle: 0 - 60º Featured with: - Coolingunit Nkodpfxjtt Nd Rs Ad Net Country of origin: Italy Motor power: 1,8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm Nkodpofqpxijfx Ad Nst - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more Nsdpfewki Apjx Ad Njkt - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: as good as new (ex-display), Year of construction: 2025, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swivel diameter over cross slide 270 mm Swivel diameter in the bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle face CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kg Machine dimensions 2700 x 1080 x 1370 mm Accessories - 3 axis DRO - 3 jaw chuck - 4 jaw chuck - Faceplate - Tailstock - Cooling unit - 4-.fold toolholder - Splash guard - Chuck protection - Manual Nksdpexbzqqsfx Ad Net The lathe is in factory brand new condition. Showroom model. It is with 12 months of warranty in Hungary.

Condition: used, Year of construction: 2007, cutting width (max.): 1,060 mm, cutting height (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Njdpjwk D Efefx Ad Njkt Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: used, TECHNICAL DETAILS - spindle speed : 400 - 4.500 [Rpm] - drilling capacity in steel / cast iron : 10 / 13 [mm] - drilling depth : 60 [mm] - column / spindle distance : 185 [mm] - useful table volume : 220 x 300 [mm] Nsdpfxsuhabts Ad Njkt - motor power : 0.5 [kW] - supply : 220 [V] - speed selection through display of drilling diameter and material - electronic adjustment of the spindle speed - continuous adjustment of the spindle speed between 400 and 4500 Rpm - steady loading speed - drilling head with adjustable height through pneumatic compensator - fine adjustment of the drilling depth through millimetric vernier - electronic protection motor - base plate entirely machined (220 x 300 mm)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22012101118, spindle bore: 21 mm, center height: 100 mm, turning diameter: 200 mm, type of input current: AC, turning diameter over bed slide: 110 mm, input voltage: 230 V, spindle speed (max.): 2,500 rpm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 150 rpm, spindle speed (min.): 150 rpm, tailstock quill mount: MK 2, spindle mount: MK 3, total width: 425 mm, total length: 830 mm, total height: 360 mm, tailstock quill stroke: 65 mm, Equipment: rotational speed infinitely variable, Working Ranges Center Height: 100mm Center Distance: 300mm Swing Diameter over Cross Slide: 110mm Bed Width: 100mm Speed Range Speed Control: electronically adjustable Number of Speed Ranges: 2 Speed Range: 150 – 2500 rpm Electrical Data Drive Motor Power: 0.6kW Connection Voltage: 230V Mains Frequency: 50Hz Standards and Approvals Standard: DIN EN 55011 EMC Class: C1 Spindle Spindle Bore: 21mm Tool Holder Maximum Mounting Height: 12mm Chuck Passage Diameter: 20mm Spindle Taper: MT 3 Tailstock Tailstock Taper: MT 2 Tailstock Quill Travel: 65mm Nedow Imhvepfx Ad Nskt Leadscrews Metric Pitch: 0.25 – 3mm/rev Number of Metric Pitches: 14 Inch Pitch: 44 – 8 TPI Number of Inch Pitches: 12 Travel Cross Slide Travel: 55mm Compound Slide Travel: 75mm Carriage Travel: 300mm Feed Longitudinal Feed Range: 0.1 – 0.2mm/rev Number of Longitudinal Feeds: 2

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories Nkedonzpx Rjpfx Ad Not -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: good (used), Year of construction: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Nodpfx Adet Iklko Nekt Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Weight: approx. 3,000 kg

Condition: new, Year of construction: 2025, TYTAN 750 PRO 400V universal lathe. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking and reaming holes. It is usually used in small industrial plants, workshops, garages, etc. Machine description The TYTAN 750 VARIO PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine that responds to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. Main advantages: + A modern motor with smooth spindle speed regulation ensures comfort of use and shortens the calibration time. + The LCD screen with the spindle speed display allows you to control and quickly modify the spindle speed while setting the cutting and tapping modes. + Two spindle speed ranges: reduced (50-1250) for machining hard steels and increased (100-2500) for high-speed precision turning. + Threads cut: metric - 18 degrees (0.2-3.5), inch - 21 degrees (8-56) left and right threads can be cut. + The automatic longitudinal feed has 6 speed ranges (0.07 to 0.40) mm / rev. - thanks to it, the machining time is much shorter, which does not deteriorate the quality of work when turning long parts. + The TYTAN 750 vario PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine responding to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. + The machine is fully compliant with the requirements of EU directives (CE) as well as Polish regulations and DIN standards. Technical parameters dimensions Turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Claw spacing 750 mm Bed width 135 mm Spindle passage 27 mm Spindle taper MK4 Spindle speed adjustment smooth Spindle speed 50-1250 | 100-2500 rpm Number and range of metric threads (18) 0.2-3.5mm / rev Number and range of inch threads (21) 8-56 zw./cal Number and range of feeds 0.07-0.4mm / rev Top slide travel range 70 mm Maximum cross slide travel 135 mm Maximum travel of the longitudinal slide 650 mm Maximum tool size 16 x 16 mm Feed the tailstock sleeve 60 mm Tailstock taper MK2 Handle size 125 mm Nsdpfsvvlxlox Ad Nokt Spindle motor 1.1 kW L / W / H 1,350 x 560 x 1,250 mm Weight 170 kg