Teach-in-lathe

Microcut ERIC – TC 1840

Condition: excellent (used), grinding wheel (ØxWxd): 125 x 20 x 20 mm Bsdpfxsfqicxj Aafslc Speed: 2800 rpm longitudinal adjustment: 130 mm cross adjustment: 80 mm height adjustment: 65 mm rake angle: +25° to -10 Dimensions WxDxH: approx. 550 450 450 x 650 mm Weight: approx. 70 kg

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Blsdpjdyah Ssfx Aafec Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, CNC Control: Professional 5 (FANUC) X travel (mm): 550 Y travel (mm): 1,000 Z travel (mm): 500 B axis (mm): 150 C axis (degrees): 360,000 Number of pallets: - Table dimensions (mm): ø500 Table load capacity (kg): 350 Cutting feedrate X, Y, Z (mm/min): 32,000, 40,000, 40,000 Rapid traverse max. X, Y, Z (m/min): 48, 50, 50 Spindle speed (rpm): 14,000 Spindle power (kW): 18.5 / 15 Taper type: HSK63 Torque (Nm): Magazine type: Chain Magazine capacity (positions): 317 Max. tool diameter (mm): 90 Max. tool diameter with adjacent slots empty (mm): 140 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): - Through spindle coolant (bar): yes Bedpjxmgcpsfx Aafelc Equipment: Rotary table with digital measuring system Work light Through spindle coolant Electronic handwheel Dimensions: Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Condition: excellent (used), Year of construction: 2014, Datron M8 Cube with rotary swivel table (4th + 5th axis) HSC Pro control V9 Year of manufacture: 2014 Machine operating hours: approx. 8,800 hours 2kW HF spindle, 6,000 rpm up to 60,000 rpm with direct shank tool clamping system HIB HF spindle cooling unit Blodpfxsx Rpl Dj Aafec 15-position automatic tool changer 3D probe Renishaw Precision tool length probe Microjet minimum quantity lubrication system with 4-nozzle spray unit Vacuum table with 500mm x 500mm working area 1 x T-slot plate 1 x short-stroke clamp 3-fold vacuum distributor The machine is in very good condition. The machine can also be purchased without the rotary swivel table (4th + 5th axis).

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m total power requirement 25 kW weight of the machine ca. 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min Bljdpfx Aajxb Edzefjc - Roller conveyor - Chip conveyor - Technical documentation

Year of construction: 1991, condition: good (used), machine/vehicle number: 07282, Offer 22336 Technical data: - max. working width 3030 mm - max. sheet thickness without bending 4 mm - max. sheet thickness with bending 3 mm - 3 driven rolls - roll diameter top / bottom 205 / 185 mm - working speed m/min Bledpfx Aemdqllsafsc - drive - brake motor 400 V / 7,5 kW - space requirement approx. W 5500 x D 1400 x H 1300 mm - weight approx. 4,7 t - with - bending - Rear roller inclinable, - hinged bearing for swinging out the top roller - extended roller ends for mounting of profile rollers - right + left rotation - separate control panel

Condition: used, Year of construction: 1982, grinding length:500 mm grinding width:225 mm workpiece height:400 mm total power requirement:5,5 kW weight of the machine ca.:3,4 t NC81 NC-control, table belt drive 100-25000 mm/min., automatic feed, electronic dressing unit 020 NC-K with RPM-compensation, coolant pump, emergency cut-off Bledpecxxtmjfx Aafoc

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,400 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: TRUMPF, controller model: TASC 6000, bending force (max.): 230 t, working width: 3,230 mm, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 2,690 mm, installation height: 615 mm, operating speed: 10 mm/s, number of axes: 6, type of crowning: CNC-controlled, oil tank capacity: 330 l, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge: 860 mm, overall weight: 16,000 kg, total length: 4,270 mm, total width: 2,120 mm, total height: 3,200 mm, number of support arms: 2, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, + 2 quick-adjustable support consoles on linear guides + 6-axis backgauge system (X1, X2, R1, R2, Z1, Z2) with control cabinet air conditioning + Hydraulic and hardened upper tool clamping + CNC-controlled crowning + Preparation for ACB + BendGuard safety device for 200 mm/s Standard equipment: - Four-cylinder upper drive concept - Electrohydraulic ram drive with proportional valve technology - Ram travel measurement system - Modern block hydraulics - Electronic pressure scale Bedpox Elxvsfx Aafjlc - Spherical suspension and inclination of the pressure beam - CNC backgauge system - Safe forward finger adjustment - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, hydraulic lower tool holder - Flat front cover - Modern safety guard - CE mark - Oil cooler - Control cabinet cooling (air-air) - Operating manual

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Vertical Turret Lathe - Double Column / Brand: SCHIESS BRIGHTON Type: Vertimaster / Year of construction: 2009 The machine can be inspected by appointment. Condition: Fully functional / operational. TECHNICAL DATA: Working area and traverse: - Max. Machining- / Swing diameter: 9.000 mm - Processing height max.: 6.000 mm - Faceplate diameter: 6.000 mm - Passage width between racks/pillars: 8.300 mm Power and torque: - Main drive: 240 KW - Max. Torque on the face plate: 250 kN m - Max. Workpiece weight: 150 tons Boring and milling device: - Power max.: 63 kW - Speed max.: 2.500 rpm - Torque max.: 2.200 Nm Support: - Cross section: 520 x 420 mm - Injection diameter min.: 750 mm - Cutting power at 6 m Diameter max.: 75 kN Bedjxgv Egjpfx Aafolc EQUIPMENT: - CNC-Control: SIEMENS Sinumerik 840D - Tool holder: SK 50 - Operating platform - Chip conveyor - Documentation - Additional excellent accessories ... There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale. Detailed technical data sheet and information on equipment available on request.

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Bjdpfx Aaewtpfpofjlc Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.