Used L + Z Lathe for sale (37,222)

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: MING2/3/4/5/6/7, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,000 mm, axle spacing: 1,480 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Ohra - Double-sided cantilever rack, long goods rack, heavy-duty rack Consisting of 15 uprights + 60 cantilever arms Height 3.05m - Uprights IPB200 (HEB200) - Upright spacing 1.48m center-to-center Total depth 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Chjdpjv Smm Nefx Adkoc Upright load capacity 7500kg Wooden inserts can be supplied upon request. Six racks are available! 4 with 4 levels - 60 arms 2 with 6 levels - 90 arms + €2,000 surcharge Very good condition, see pictures A forklift is available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: excellent (used), RNA 900 mm diameter vibration feeder, component feeder / ct1339a In good condition, for sale with ESR3000 controller. Manufacturer: RNA Type: SRC-N 630-1 L Vibration frequency: 50 Hz / 3000 min - 1 Voltage: 220 V Power: 5.4 Diameter: 900 mm A = Output height: 167mm B = Trail width: 50mm D = Bowl diameter: 980mm H = bowl height: 250mm S = Track division: 81mm Chsdpfx Adeh Iy Tteksc

Condition: used, Year of construction: 2014, SPX/ SEITAL SE 355 BX is a Dairy Bacterial Remover Centrifuge. This machine was initially I purchased by a Dairy that changes there equipment every 10 Years. The dairy was the first owner of this machine and has internal engineers providing all services on time, keeping the machine in excellent condition and providing all needed attention on time. The machine was working until September 2024 and was replaced due to new machines being installed for a larger capacity. The Bacterial Remover Separator is used for various reasons and one of these is for cheese producers as the bacteria does not allow the cultures to act in the correct manner. Removing the Bacteria’s will ensure a longer shelf life of fresh milk and also correct reactions on the cultures. Capacity: 10,000 L/h Controls: Included Tools: Included Stainless steel skid: Included Chsdpfx Adeuruh Dskoc Water system and pump: Included Manuals: Included Machine condition: Excellent

Condition: new, Year of construction: 2025, Bin capacity: 40 [kg]. Capacity: Up to 140 [bulbs/min]. Raw material size: 45 - 140 [mm]. Overall width of device: 1050 [mm]. Total height of the machine: 1880 [mm]. Total length of machine: 4830 [mm]. Number of operating paths: 2 loading height of onion: 1000 [mm] Height of onion pick-up: 700 [mm] Height of waste collection: 400 [mm]. Power supply: 3 x 400 [V] / 50 [Hz] Csdpjd Nimaefx Adkjhc Installed power: 1,2 [kW]. Compressed air connection: 8-10 [bar]. Air consumption: 1,9 [m3/min]. Noise level: Over 80 [dB]. Construction materials: Stainless steel and plastics approved for contact with food CE certificate: yes Cutter: no

Condition: excellent (used), Collet chuck from the renowned brand GARANT (Hoffmann Group) – guaranteed top quality and reliability in CNC machining. Model SK40-12-50, catalogue number 300100 12. • SK40 taper – industry standard for machining centres • Clamping diameter Ø12 mm • Chuck length 50 mm • Max. RPM 25,000 • High precision and dynamic balancing • Supplied with a mounted end mill. Very good condition, ready for immediate use. Professional tool for CNC milling machines, ideal for workshops that value quality and reliability. Cedpfx Aow Sy Anodkohc -- PRICE LISTED IS FOR 1 PIECE --

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,500 kg, Fork positioner Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: None Technical condition: New Csdpfow Sp Dhex Adkshc Description: Brand-new fork positioner, frame width 1,200 mm, opening center/center 270 to 1,120 mm, brackets for standard forks, with sideshift valve.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: MING8+10 / 9, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,000 mm, axle spacing: 1,480 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Ohra - Double-sided cantilever racking, long goods racking, heavy-duty racking Consisting of 10 uprights + 40 cantilever arms Height 3.05m - Uprights IPB200 (HEB200) - Upright spacing 1.48m center-to-center Total depth 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per boom 1000kg Upright load capacity 7500kg Wooden inserts can be supplied upon request. Chodpsv Smrxofx Adkec Shelf is available 3 times!!!! Nos. 8 and 10 - 4 with 4 levels - 40 arms No. 9 - 1 with 6 levels - 60 arms + €1,000 surcharge Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your postal code

Condition: used, functionality: fully functional, rotational speed (max.): 90 rpm, Electrovariable electric motor 1.8kw, 3.2-90 1/min Manufacturer: Getriebebau NORD 32-RV30-90 L/8-2 BRE16 Power: 0.45/1.80 kw Voltage: 230/400 V 50Hz 0.31A Rotation: 3.2-90 1/min IP44 Shaft diameter: 40mm Weight: 50kg Codpfxoud H Sde Adkohc Gearbox: Manufacturer: Getriebebau NORD Type: 90L/8-2 BRE16 IP54

Condition: reconditioned (used), TILT-DOWN PLATES FOR BROOKS W= 39 cm L= 59 cm H= 4.5 cm Chsdpfx Asgh Hu Usdkec Openwork Stackable approx. 260 pieces available for further questions please contact me

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Csdpfx Ajw Uf Tksdkohc Individual components can also be sold as spare parts.

Condition: excellent (used), For sale: complete GARANT SK40-10-50 tool holders equipped with VHM solid carbide end mills. Products from the renowned Hoffmann Group Germany, ready for immediate use on CNC machining centers. • Clamping type: SK40 (DIN 69871) • Bore size: Ø10 mm • Length: 50 mm • Catalogue no: 300100.10 • Balancing: G2.5 up to 25,000 rpm • Set includes: VHM solid carbide end mills Ø10 (various types – visible in the photos) • Ideal for machining steel, stainless steel, cast iron, and metal alloys • Very good condition – tested and ready for use GARANT tool holders ensure top-quality clamping and machining precision at high spindle speeds. -- PRICE IS PER PIECE -- Codpfx Aow Sy Ahedkehc

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, Fork positioner Csdpfxow Sp Dbs Adkehc Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: None Technical condition: New Description: Brand new fork positioner, frame width 1,150 mm, opening center/center 250 to 1,050 mm, brackets for standard forks, with sideshift valve.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: MING11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 18,000 mm, total width: 2,000 mm, total height: 3,000 mm, axle spacing: 1,500 mm, load capacity per stand: 7,000 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Cantilever racking, long goods racking, heavy-duty racking - double-sided Consists of 13 uprights + 52 cantilever arms Height 3m - uprights IPE200 - upright spacing 1.5m center-to-center Total depth 2m (both sides) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7000kg Arms are continuously adjustable Chedpfxov Smr Sj Adkoc Including crossbars from arm to arm, including wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: used, Year of construction: 2020, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, frequency: 50 Hz, Zenith 46kw dark radiator 12-15 meter black radiator ZENIT-46/L dark radiator 15m long for sale in mint condition. complete unit with heat-reflecting shade, spacers, hangers, chimney if required make PAKOLE Zenit 46/L year of manufacture: 2020 heat output: 46kw pipe length: 12-15 meters Csdpsudldfsfx Adkehc p connection: 360mbar Connection voltage: Max. current consumption: IP21 AC 230V 50Hz

Operating hours: 12,000 h, condition: good (used), functionality: fully functional, Raster press punching line which includes: 1) Dimeco Alipresse type 2330DF unwinder with SV tracking and speed change system. 2) Dimeco Alipresse type 1645 powered straightener with SV tracking and speed change system. 3) Raster eccentric press Type HR 60 SL-4 S with soundproof enclosure . Parameters in the photos. Csdpfxoryu Tas Adkehc 4) Documentation.

Condition: excellent (used), For sale: a robust measuring device from the renowned German manufacturer AbaWerk Aschaffenburg. Made with a cast iron base and equipped with two hardened centering points for securing shafts and cylindrical workpieces. Perfect for use with toolmaker’s microscopes, measuring projectors, and in quality control applications. Technical specifications: • Manufacturer: AbaWerk Aschaffenburg (Made in Germany) • Center distance: approx. 115 mm • Stable, heavy cast iron base – secure clamping • Allows rotation of the workpiece between centers • Condition: used, fully functional Chsdpfx Asw Sav Iedkjc Manufactured to industrial standards – precision and durability make these units highly sought after in metrology and toolmaking environments.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, Fork positioner Chsdpfx Aew Sp A Rjdkjc Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: None Technical condition: New Description: Brand new fork positioner, build width 1,050 mm, opening center-to-center 250 to 950 mm, brackets for standard forks, with sideshift valve.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: WIL208, Technical data: 1 Vetter AS pillar jib crane NL 250KG with Demag DC chain hoist Type AS2.5-5.0 Load capacity at full outreach: 250 kg / 0.25 t Height: approx. 4.25 m Underside of jib: approx. 3.94 m Chodpfx Adjxcg Dxekec Outreach: approx. 5 m Hook height: approx. 3.5 m Total weight: approx. 900 kg including anchor plate 110x100 cm With Demag DC chain hoist 250 kg Slewing range 270°, connection to 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, load capacity 80-5000 kg, please enquire See pictures Shipping by forwarding agent or collection only by prior arrangement

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Chodpfxow R Syio Adkoc

Year of construction: 2009, condition: excellent (used), machine/vehicle number: MBMA1/11, Technical data: 1x Demag KBK 1 column slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Height: approx. 3.55m UK boom: approx. 3.05m Projection: 4m Hook height: approx. 2.6m Total weight approx. 600KG including dowel plate 55x55cm with 125KG Demag chain hoist including bolts, cable drag, chassis, end cap, etc. Crane is available 3x!!! Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire Csdpfx Adjrhzdyokehc See pictures Shipping by courier or collection only by appointment

Condition: excellent (used), For sale: Professional SK40 tool holder (designation: 83 814 114, SK-40 Ø14x80, no. 12409096) with mounted VHM end mill Ø14 mm. The holder is ventilated, providing efficient cooling and extended tool life. Multi-flute solid carbide end mill in very good condition – ideal for machining steel, cast iron, stainless steel, and other hard materials. Condition: used, fully functional. Cjdpow Rrxxsfx Adkjhc

Year of construction: 1992, condition: like new (used), machine/vehicle number: Div1, Technical data: 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg Codpfx Adong H T Uekjhc with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: excellent (used), Complete, professional HOLEX tool holder for sale, designed for micro-drilling and precision machining. Technical specification: • Manufacturer: HOLEX • Reference: 300520 16 • Model: SK 40-1/10-100 • Length: 100 mm • Collet: ER16 with HOLEX nut (marking G 6.3 / 15,000 rpm visible) • Spindle: SK40 • Max torque: 70 Nm • Balancing: G 6.3 / 12,000 rpm • Year: 11/10 • Included: micro drill – mounted and ready for operation Very good technical condition – the collet holds securely, drill is undamaged. Ideal tool for highly precise operations in electronics, medical, or toolmaking applications. Shipping or personal pickup available. Chsdpew Rd Swjfx Adkjc

Year of construction: 1997, condition: excellent (used), machine/vehicle number: W126, Technical data: 1 steel column slewing crane NL 125KG with chain hoist Payload at full radius 125 KG / 0.125ton payload Height: approx. 3.55m UK boom: approx. 3.3m Projection: approx. 5.2m Hook height: approx. 2.95m Total weight approx. 800kg including dowel plate 72x72cm with steel ST chain hoist 125Kg Swivel range 270°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire Chodpfxep Arr Is Adkjc See pictures Shipping by courier or collection only by appointment

Condition: excellent (used), For sale: Precision electronic micrometer ATORN 25–50 mm, mounted on a robust cast iron stand. Ready for use in production, workshop, or metrological environments. Very good condition – unit has been tested, display works flawlessly, measurement is precise and repeatable. Micrometer technical specifications: • Range: 25–50 mm (1–2”) • Accuracy: 0.001 mm (0.00005”) • Model: Atorn 3 040 2002 Chedpsw Rdgbjfx Adkoc • Functions: PR, mm/inch, ABS/REL, zeroing • Large, easy-to-read LCD display • Original industrial-grade ATORN micrometer (high quality, comparable to Mitutoyo or Mahr) Measurement stand included: • Solid cast iron base • Two-axis adjustment • Ideal for precise positioning of workpieces