Used Juice for sale (249)

Condition: good (used), Year of construction: 1995, - Elastic membrane in good condition - Membrane in very good condition - Machine with integrated compressor - With central filling, ball valve DN 80 - With pressure switch and alarm siren - Feet: H: 500 mm - Sensors in the juice tank for controlling the must pump Iedpfx Apsznlpde Hobb - Machine in good condition

Condition: excellent (used), Year of construction: 1998, - Container volume: 1200 l - Elastic membrane, new, 2026 - Machine with integrated compressor - With central filling, ball valve DN 80 Ibedpfx Ajznlntjp Hsb - Feet: H: 300 mm - Sensors in the juice tank for must pump control - With discharge cart for testing purposes - Machine in very good condition, little use

Condition: new, capacity: up to 3 000 kg/h electric outlet: 3,5kW 400V 50Hz (3 phases) Ibedpfjdix I Ujx Ap Hob fuse 16 A dimensions: length: 3 720 mm width: 1 730 mm height: 2 110 mm insertion resp. discharge height: 1 430 mm belt width: 660 mm spread width: 220 - 440 mm spread height (infinitely adjustable setting): 10 - 40 mm weight: 2 200 kg material: 1.4301 / AISI 304 juice yield : up to 80 % belt Speed: 1,2 – 4,5 m/min contact time: 1,4 – 4,2 min water consumption for cleaning: 10 l/min connections: sewage connection: Ø 75 mm juice discharge connection: DN 25 juice discharge height: 130 mm sewage discharge height: 50 mm pomace discharge height: 810 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Condition: good (used), Kecol Maxiprime 800 drum pump Ijdpfsu S Rkmjx Ap Hobb Stainless, pneumatically operated, 130L per min, up to 12mm solids, previously used for pumping fruit juices out of tote bins

Condition: new, Year of construction: 2017, Item: AL-10509-CSF Pump 7.5kW CSF Inox Self-Priming Pump – Type ASH65-4-10/BM.CDPZTH1 Manufacturer: CSF Inox S.p.A. – Montecchio Emilia, Italy Model: ASH 65-4-10/BM.CDPZTH1 Year: 2017 (newer, used) Material: Stainless steel AISI 316L Power: 7.5 kW Speed: 1450 rpm Voltage: 400/690 V – 50 Hz ATEX certification: II 2G c T3 (Zone 1) Ibjdpfx Apjzfhcno Hsb Connection: 3″ sanitary fittings Condition: Very good, unused – stored in original wooden crate Description: High-quality stainless steel centrifugal pump from CSF Inox, suitable for use in hygienic and ATEX environments. The ASH-series pumps are designed for gentle and efficient transfer of liquid food products, beverages, dairy, and chemical solutions. The low-speed 1450 rpm motor provides smooth operation with reduced shear and foaming – ideal for milk, cream, wine, juice, or CIP applications. The pump housing, impeller, and shaft are made entirely of AISI 316L stainless steel, ensuring long service life and corrosion resistance. Typical Applications: Dairy and food processing lines Beverage, wine, and juice plants CIP cleaning systems Chemical and pharmaceutical installations ATEX classified areas Status: Ready for immediate delivery Location: Denmark

Condition: good (used), Year of construction: 1998, functionality: fully functional, The machine can fill still drinks, water, juices, wine and carbonated drinks The machine is isobaric Ibjdjvtgaxepfx Ap Hjb

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, conveyor belt length: 15,000 mm, production capacity: 6,000 unit/h, For sale is a complete filling system from the manufacturer Tetrapak, consisting of the following components: TBA 8 filling system (year of manufacture: 1994) Tetra Cap Applicator 21 (Recap 3) (year of manufacture: 2003) Tetra Carton Packer 70 (year of manufacture: 2002) Inkjet printer EBS 6500 approx. 15 m of conveyor belts with motors and brakes Spare parts A list of the included spare parts can be found in the attached document. Ibsdpfx Apszh H Sto Hjb TECHNICAL DETAILS Production capacity: 6000 units/h Conveyor belt length: approx. 15 meters MACHINE DETAILS Operating hours filling system: 85,286 h Operating hours cap applicator: 36,416 h Operating hours carton packer: 38,626 h EQUIPMENT Tetrapak TBA 8 filler without pull tab Tetra Cap Applicator 21 (Recap 3) Tetra Carton Packer 70 Inkjet printer EBS 6500 The machine's maintenance has been carried out exclusively by Tetrapak in recent years.

Year of construction: 2024, condition: new, The pasteurizer is suitable for heat treating liquid, low-viscosity food products. The device is designed in accordance with food hygiene requirements. The heat treatment is carried out via a heat exchanger equipped with a stainless steel tube coil. The thermal energy is provided by a heating oil boiler. The temperature of the heating water is regulated by the boiler control. The temperature control of the treated liquid is achieved by a controlled switching valve. Temperature is monitored at two points: once in the heating medium and once at the product outlet. The device regulates the temperature of the heating medium automatically. Operation is fully automated. If the temperature of the juice to be pasteurized falls below the desired temperature, the output of the device is blocked and the juice circulates in the bypass system until the temperature reaches the set level. After that, the device allows filling again. After work is finished, the tube coil can be cleaned very easily using a sponge ball system. The device requires only minimal maintenance. ⚙️ Technical Information Capacity: 400 L/hour (when heating from 20°C to 80°C) Power requirement: 1 kW, 230 V, 6 A Boiler output: 35 kW Fuel: Diesel or gas Material: AISI 304 stainless steel Dimensions: Length: 1820 mm Width: 620 mm Height: 915 mm Protection class: IP65 Connections: DN 25 Exhaust pipe: 110 mm diameter Automatic temperature control Automatic bypass system Easy cleaning with sponge balls Low maintenance Options: Manual bag-in-box filling device Semi-automatic bag-in-box filling device 3-head bottle filling module Iodpfxev Srw Ts Ap Hobb Accessories: Sponge balls for cleaning

Year of construction: 2026, condition: new, The pasteurization system is fully automated with an industrial control system and touchscreen operation. If the temperature of the juices to be pasteurized drops below the desired temperature, the outlet side of the machine is shut down, and the juice is directed through the bypass until the desired temperature is reached again. Filling can then resume. At the end of the cycle, the spiral pipe can be easily cleaned with a sponge ball. Our system is low-maintenance. ⚙️ Technical Information Rated capacity: 400 L/h Power requirement: 27 kW, 400 V, 40 A Material: Wnr. 1.4301, AISI 304 stainless steel Water buffer: 80 L Dimensions: Length: 760 mm Width: 714 mm Height: 1637 mm Ibjdpfx Apjv Srl Re Heb Weight: 170 kg Optional with filling equipment

Year of construction: 2025, condition: new, Stainless steel bottle filler with 3 filling heads Iodpfxov Srcij Ap Hsbb The bottle filler with pump is made entirely of stainless steel. The filler is equipped with heavy-duty, industrial filling heads that allow for automatic and adjustable filling height of the bottles. The system is suitable for wine, beer, oil, detergents, and more. • Made entirely of stainless steel, including all connections, floats, and nuts • Can be steam sterilized • Capacity: 130 l/hour per filling tube • With mechanical float valve in the reservoir • 3 filling heads • Optionally with pump This bottle filler is equipped with filling heads for fruit juice as standard. ⚙️ Technical information Capacity: up to 400 L/h Material: WNo. 1.4301, AISI 304 stainless steel Dimensions: Length: 820 mm Width: 500 mm Height: 1910 mm Weight: 22 kg With bottle filler: 28 kg

Year of construction: 2025, condition: new, These tanks are ideal for cider mills and wineries for contract pressing. They can serve multiple customers simultaneously and continuously without having to stop pressing. With the help of valve settings, you can designate the specific tank for specific customers. The juice does not mix with other juices. Depending on customer preferences, we manufacture containers in various sizes: 200 L, 500 L, 1000 L. Ibjdpfx Apotpxm Ds Hob Technical Information • Capacity: 300 L (3x100L) • Material: Wnr. 1.4301, AISI 304 stainless steel • With floating lid • Fill level indicator Dimensions: • Length: 1250mm • Width: 508mm • Height: 350mm • Diameter: 398mm • Overall height: 1100mm • Tank height without legs: 850mm • Leg height: 250mm • Weight: 60kg The dimensions apply to one container!

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Ibodpfx Apsv Sq S Ne Hjb Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Year of construction: 2026, condition: new, Our belt presses can be dismantled and cleaned in just a few minutes without tools. The belt press is easy to operate. Effective belt cleaning is achieved by three spray nozzles and silicone wipers. Thanks to this innovative solution, the system can be operated for the economical production of fruit and vegetable juice. You don’t need a high-pressure cleaner, so you save on electricity costs when pressing. All you need is a compressor with 8-bar pressure and a ½" water connection. • Fully automatic and infinitely variable belt speed control • Easy to clean • Easier maintenance • Rolling machine feet • Automatic belt correction Technical Information Rated output: 350 kg/h Working width: 400 mm Juice yield: up to 75% Power consumption: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Air Operating pressure: 6 bar approx. 50 l/h Dimensions: Iodpfxsv Sq Nbe Ap Hobb Length: 1,080 mm Width: 1,070 mm Height: 1,320 mm Weight: 297 kg Optional: automatic juice draining

Year of construction: 2026, condition: new, Our systems can be dismantled down to the base frame in just a few minutes for effective cleaning. Our belt presses are suitable for pressing fruit and vegetables. Effective belt cleaning is done with the help of brushes and a belt washing system. You only need an air compressor to operate the system. Technical Information • Rated output: 650 kg/h • Power consumption: 1 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and infinitely variable belt speed control • Operator friendly • Easy to clean • Rolling machine feet Dimensions: Length: 2,230 mm Width: 1,250 mm Height: 1,250 mm Height assumptions: 1,240 mm Height of pomace discharge: 500 mm Height of juice outlet: 370 mm Isdev Sq Rxjpfx Ap Hsbb Weight: 480 kg Optional: Juice collection tank ISW 100 Automatic juice draining

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): Iedezg Dlbepfx Ap Hobb • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. 2. Transfer pump with controls: • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: Fb001, warranty duration: 12 months, total height: 1,000 mm, total width: 800 mm, total length: 1,100 mm, type of input current: three-phase, overall weight: 100 kg, power of the servo motor: 1 W, film width: 38 mm, compressed air connection: 0.25 bar, input voltage: 220 V, nominal power: 0.5 kW (0.68 HP), heating capacity: 0.8 kW (1.09 HP), Equipment: CE marking, Performance and features: 1). The machine is mainly made of quality stainless steel; the parts contact the material is made of 304# stainless steel and food grade plastic tubes and comply with hygienic standards for food; 2).It can fullfill accurate filling and capping at one operating position. 3). The machine uses flow meter for filling which is with high filling precise. 4). All its pneumatic and electric parts are from world famouse brand which are good quality. 5). can achieve vacuum pumping before they are filled, thereby helping extend the shelf life of the product. Ibsdpoxmwkqjfx Ap Heb 6) Can add nitrogen function according to clients requirement. Application: It can be widely used in bag-in-box filling applications for such liquid materials as wine, edible oil, fruit juice, additives, milk, syrup, alcoholic beverages and concentrated seasonings.suitable for all kinds of bags and caps.

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. Iodpfxsu Nad To Ap Hebb The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. As option we can add the carbonated station completed with chiller and heat exchange unit. After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets.

Year of construction: 1998, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Complete Technological Line for tomato paste production - 3-stage vacuum evaporators Professional industrial plant for the concentration of tomato juice and fruit juices. Manufactured by the experienced Bulgarian manufacturer Thermohran Engineering, this system is designed for high-quality production, preserving the organoleptic characteristics of the product through low-temperature vacuum evaporation. Technical Specifications: Manufacturer: Thermohran Engineering Ltd. (Bulgaria) Year of Construction: 1998 Material: High-grade Stainless Steel (Inox) System Type: 3-stage Vacuum Evaporator Components Included: * Main Evaporation Columns II.5. GENERAL LAYOUT DATA OF THE COMPLETE LINE Capacity (processed tomatoes) t/24h 150 Product capacity 28-30 oBrix kg/h 1 000 Steam consumption kg/h 4 000 Tap water consumption m3/h 10 Sealing water consumption m3/h 0.7 Electrical consumption kW/h 147 Water consumption t = 18 oC m3/h 78 t = 28 oC m3/h 195 Air consumption at P= 4 bar nm3/h 7 Mounting area m 6x40x6m (in the area of the evaporating installation the height must be 13 m) Complete Control Panel (Brix meter) Pumping Station (centrifugal pumps) External Cooling Tower / Heat Exchanger unit Applications: Enrichment of tomato juice (Double and Triple Concentrate). Fruit juice concentration. Isdpfxezfx Dvo Ap Hebb

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZBF01, total height: 2,100 mm, total width: 1,100 mm, total length: 1,250 mm, manhole location: side, type of input current: three-phase, overall weight: 1,800 kg, input voltage: 220 V, Automatic Beverage Juice Water Bottle Liquid Filling Machine Production Line For Factory is specifically designed for various liquid products, ensuring precise and efficient filling operations. It is ideal for a range of industries including beverages, foods, and personal care. This machine ensures high accuracy, operational efficiency, and compliance with stringent industry standards, making it perfect for B2B buyers such as wholesalers, cosmetics factory owners, import traders, and project contractors. Isdsxumtqspfx Ap Hobb

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZBF-003, total width: 1,050 mm, total length: 800 mm, total height: 1,500 mm, empty load weight: 80 kg, space requirement width: 1,100 mm, space requirement length: 1,000 mm, space requirement height: 16,000 mm, Equipment: CE marking, Semi-automatic bag-in-box filling machine is specially designed for bag-in-box filling,Adopt plunger pump to measure filling with high filling precision. And easy to adjust filling volumes. It is widely used for filling wine, juice, milk, water, and other beverage. 1). The machine is mainly made of quality stainless steel; the parts contact the material is made of 304# stainless steel and food grade plastic tubes and comply with hygienic standards for food; 2).It can fullfill accurate filling and capping at one operating position. 3). The machine uses flow meter for filling which is with high filling precise. 4). All its pneumatic and electric parts are from world famouse brand which are good quality. 5). can achieve vacuum pumping before they are filled, thereby helping extend the shelf life of the product. Ijdpfsxv Rqijx Ap Hobb

Condition: excellent (used), Year of construction: 2000, - Year of manufacture: 2000 - Membrane: 2024 Ibsdjzc H Swspfx Ap Hob - With 2 large filling doors - With central filling system - With large juice collection tank - With foot extensions, height 200 mm - Last used: Harvest 2025 - Machine in very good condition Dimensions: - Length: approx. 4,700 mm - Width: approx. 1,900 mm - Height: approx. 2,000 mm

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Ibedpfx Aovcqy Usp Heb Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Additional title: Intermix system with carbonisation unit Ibjdpfxex T Aqfj Ap Heb Water output: 22575 l/h Fruit juice output: 4907 l/h Operation / Control: Control panel, manual Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Condition: used, Year of construction: 1991, Flottweg three-phase decanter, Z4D-3/441, last used in a fruit juice plant. Inner drum diameter: 420 mm Inner drum length: 1245 mm Drum wall thickness: 10 mm The medium to be separated is fed into the hollow center axis of the decanter. Centrifugal force causes the solids to collect on the drum shell. A cylindrical-conical screw conveyor transports the ring of solids to the discharge openings, where it is ejected into the solids housing. The two liquid components separate according to their specific density and form two hollow liquid cylinders. The diameter of the liquid rings can be adjusted using a peeling disc and overflow weir. One of the two phases is discharged without pressure and one is discharged under pressure via the paring disc. The moisture content of the solids and the purity of the liquids can be controlled by: - Varying the phase separation discs and paring diameter - Decanter speed - Screw speed Additional title: 3-phase decanter Max. bowl speed: 4000 r/min Max. sediment-density: 1 g/cm³ Max. ambient temperature: 100 °C Mass moment of inertia: 15.5 kgm2 with an empty drum Weight: 2250 kg Material: housing from stainless steel 1.4301 (AISI 304); drum made of high-strength cast stainless steel 1.4463 Position: free standing Iedpjyr Iccofx Ap Hebb Base construction: Horizontal decanter drum in steel frame, on square tube frame with dome feet Features: Base with rubber mountings, electric motor (Loher 180 M, 22 kW)

Year of construction: 1979, condition: used, Westfalia Separator, last used in a fruit juice plant. The separator's control system was modernized by GEA. The product is clarified in the centrifuge bowls and conveyed further under pressure. Solids collect in the solids chamber and are periodically discharged automatically. During CIP cleaning, the cleaning fluid is pumped in a circuit. Additional title: Disc centrifuge Intake capacity: 22000 l/h flow rate for fruit juice approx. 4,000 l/h Drum velocity: 6500 rpm Density liquid phase: 1 kg/dm3 Density solid phase: 1.4 kg/dm3 Power: 18.5 kW Isdpfxoyr Ic No Ap Hobb Current: 37 A Voltage: 380 V Frequency: 50 Hz Length: 1485 mm Width: 850 mm Height: 1470 mm Weight: 1200 kg Material: Stainless steel surfaces that come into contact with the product Position: on a 685 x 585 mm foundation Features: Drum, drive, inlets for product and displacement fluid, control water inlet with solenoid valve, drain, solids outlet, control water drain, circulation monitor, oil sight glass, brake, control valve, hood flushing, pressure gauge