Used Impregnator for sale (65)

Condition: new, 5000 kg length 5000 mm width 2000 mm Isdpfxefrzu Se Afioih height 500 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 1,0 t dimensions of the machine ca. 6,3 x 2,0 x 0,5 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 0400-01-0010000, type of input current: AC, overall weight: 2,750 kg, input voltage: 10,000 V, input frequency: 50 Hz, total height: 1,953 mm, total width: 1,000 mm, total length: 1,600 mm, warranty duration: 72 months, nominal power (apparent): 1,000 kVA, nominal power: 1,000 kW (1,359.62 HP), secondary voltage: 400 V, protection type (IP code): IP00, temperature: 40 °C, empty load weight: 2,750 kg, space requirement width: 1,600 mm, space requirement length: 1,000 mm, space requirement height: 1,920 mm, ambient temperature (max.): 40 °C, roll spacing: 820 mm, Equipment: documentation/manual, type plate available, Three-phase cast-resin transformer Designed according to DIN EN 60076-11, VDE 0532, with separate winding Reduced no-load losses in accordance with Ecodesign Regulation EU No. 548/2014, Eco Directive 2009/125/EC Design features: - Flame-retardant and self-extinguishing - High-voltage winding vacuum-encapsulated, low-voltage winding vacuum-impregnated - Partial discharge-free (< 5 pC) - Taps can be changed in the de-energized state using switch lugs - Mobile design, 4 interchangeable transport rollers - Winding material: aluminum/aluminum - 4 lifting eyes, 4 draw eyes, 2 grounding screws Iijdev U Ncrspfx Afijh - Documentation: Dimensional drawing, nameplate, data sheet, circuit diagram, operating instructions in German/English - Use of double-sided insulated, grain-oriented, low-loss electrical steel sheets - Reduced power losses A0 Level 2/Ak (Eco Directive 2009/125/EC) - Suitable for converter operation, THDu < 5% - 3x PT100 connected to terminals in the terminal box (IP 54) RATED POWER: 1000 kVA CIRCUIT: Dyn5 OVERVOLTAGE: 10 kV, with a value of ± 2x 2.5% FREQUENCY: 50 Hz UNDERVOLTAGE: 400 V + N SHORT-CIRCUIT VOLTAGE: 6% (tolerance ±10%) NO-LOAD CURRENT: 0.6% (tolerance +30%) INSULATION LEVEL HV (AC/LI): 12/28/75 kV – L2 INSULATION LEVEL LV (AC/LI):

Condition: like new (used), 24000 kg length 5000 mm width 2500 mm loading area height 700 mm Heavy-duty trailer - industrial trailer - Made in Germany - Available immediately from stock Iijdpfoxcuyusx Afijh Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø425mm, total width 300mm and ball bearings.

Condition: used, Flood nozzle zone: - 8 pieces, 3 flood nozzles, adjustable, from above - 10 pieces, 3 flood nozzles, adjustable, from below - Material-carrying parts made of stainless steel - With pump unit for the flood nozzles Drying zone: - Air circulation fan with soundproof housing, dimensions 1190x1190x1170 mm - el. power 15 kW, connection diameter DN 300 mm - Air circulation system incl. fan (see pdf.) - 4 nozzles, each 1300 mm wide, for drying from above, adjustable - 4 nozzles, each 1300 mm wide, for drying from below, adjustable Transport system: - Transport system Stainless steel disk roller conveyor Technical data: - Manufacturer Finnrose Iedpfxju Tttyo Afijih - Type. Impregnation 1300 - Year of construction 1999 - Working width 1,300 mm - Max. Part height 300 mm - Shortest part length 300 mm - Length 4,000 mm - Width 1,860 mm - Height 2,200 mm - Location, in stock

Condition: used, Year of construction: 1991, Impregnation System – Dipping Plant Metallerie du sud Lorrain Year of manufacture: 1991 Blasted and coated with Sikacor 277 in 2007 The internal coating is still in excellent condition Impregnation agent: Korasit NG 50 Dip tank dimensions (L/W/H): 14.1 x 1.2 x 1.0 m Height when retracted: 2.98 m Support frame length: 8.0 m, suitable for 2 bundles of 6 m Transport dimensions (LxWxH): 15.1 x 2.4 x 2.98 m Iodpfx Aexd U A Sjfieih Roller hoisting system NEW Pump for agitation of impregnation agent Plant is still operational

Condition: used, Year of construction: 2008, Colour: Grey Manufacturer : Dumoulin Model: TD 20 Year : 2008 Type : Coating pan Iiodpfovlzxysx Afieh Coater type: solid drum for impregnation Rotor diameter: Ø 700 mm Rotor depth: approx. 550 mm Unloading: automatic by reversing the rotation of the cylinder Spraying: Axflow pump + Endress Hauser Promag 53 magneto-inductive flowmeter (year 2021) Air handling unit : not available, controllable from electrical cabinet. Reference available in documentation Siemens PLC and control panel

Condition: new, 40000 kg length 9000 mm width 3000 mm height 850 mm lenkbar lenkbar size of tyres 540 x 300 8-fach mm dimensions 10,9 x 3,0 x 0,9 m Iiedpfxsfrzwio Afioh Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: used, Year of construction: 2009, functionality: unexamined, Complete Scholz OHT system with rapid closure The system consists of: - The OHT autoclave with rapid closure - The preheater located above - Condensers 1 and 2 - The heat exchanger - The transfer pump - The control cabinet - The connecting pipeline with fittings The vessel consists of a pressure- and vacuum-resistant shell with connection flanges and sockets. Rails made from L-profiles are installed in the base of the vessel to allow loading with transfer carts. A suction profile is integrated into the vessel floor, which retains coarse contaminants inside the vessel. This prevents them from entering the preheater. Iodpfx Afsw E Hbljisih The OHT autoclave system is equipped with a SCHOLZ rapid closure for loading. The system's rapid closure is operated as follows: - Safety locking device, manual - Lid rotation mechanism, hydraulic - Door hinge, hydraulic The technical data sheet for each component is attached. The system is not in operation and therefore can be inspected thoroughly and at leisure. Complete documentation including wiring diagrams is available. Should you have any questions, please feel free to contact us.

Condition: good (used), Year of construction: 1964, functionality: fully functional, machine/vehicle number: 38897, total length: 9,000 mm, temperature: 50 °C, pressure: 14 bar, total width: 2,000 mm, operating pressure: 14 bar, We are offering for sale a 9-meter long wood impregnation autoclave with an internal diameter of 1.6 meters by the renowned manufacturer Maschinenbau Scholz at an extremely attractive price. Capacity: 189,020 liters. The autoclave is ideal for the simultaneous high-pressure chemical treatment of 6-8 m³ of timber up to 8-9 meters in length. This is an excellent machine for sawmills, wood product manufacturers (playgrounds, terraces, etc.), and wood processing companies for deep timber impregnation. The machine is available for viewing in Esztergom, 60 minutes by car from Budapest, in a Hungarian prefabricated house factory. The machine operates reliably. Reason for sale: high-pressure chemical treatment has ceased in the factory. ● The offer does not include dismantling, transport, or commissioning costs. Iijdpfx Afoxc Na Noish

Condition: excellent (used), Year of construction: 1989, operating hours: 1 h, machine/vehicle number: 8928, Hello I have for sale a pressure tank for impregnation AUTOCLAW. The machine in very good condition fully operational. The machine includes a tank, pumps and carts that transport the goods to the tank. The length of the tank itself is about 15m, the inner diameter of the tank is 160cm, and the width of the cart transporting the goods is 100cm. The machine is roofed. Disassembly of the machine on the customer's side. We invite you to purchase. More information by phone. The price of the machine is the price for export. Iiodpfxeud Sbkj Afish

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,800 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available units on our website. Selection of equipment features. Full equipment specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners beveled * Approx. 5,350 mm = low-bed deck – level loading area * Approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or up to approx. 3,000 mm with extensions) * Loaded loading height approx. 870 mm * When assembling a combination, please observe the legally permitted overall height and total length. Frame: * Steel welded construction with front gooseneck and rear bevel * Rear ramp slope with central excavator shovel recess = rear recess between longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out 10 t lashing rings (4x in the low-bed, 1x on the ramp slope, 2x on the raised platform) * Standard ball bearing turntable Frame Attachments: * Both sides of the low-bed deck with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of folding approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform, between the longitudinal beams; 1 pair at the very rear in the excavator shovel recess, left and right; 1 pair at the front of the raised platform before the gooseneck, between the longitudinal beams; 1 pair in the rear low-bed ahead of the ramp slope, in the shovel recess left + right Towing Device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked version, silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Device: * 2 automatic folding supports at the rear Axles: Ijdpfjwx Dcyex Afisih * 3 SAF air suspension low-loader axles with drum brakes * Load capacity: 11 t per axle * S-cam drum brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand per factory selection * 12 steel rims 6.75 x 17.5, with preset offset, silver Brake System/Suspension: * Dual-line compressed air brake system according to ECE directive R13 * Brake system by Wabco * EBS system 4S3M, 1st and 2nd axles with sensors * RSS/RSP – stability control * Spring-actuated parking brake on 2nd and 3rd axles * Steel air tank * Brake/air supply lines with two single coupling heads, yellow/red * EBS/ABS connection cable * Retainer rubber for EBS and electrical connectors * Air suspension with lift and lowering device (rear axles only), automatic ride height adjustment from 15 km/h (RTR), front axle mechanical stop Floor: * Approx. 50 mm impregnated softwood flooring, protruding approx. 5–10 mm above upper edge of frame, steel checker plate cover over the wheels Ramps: * 2 foldable single-piece lightweight steel drive-on ramps, approx. 2,800 mm long, approx. 750 mm wide, with impregnated hardwood inserts approx. 35 mm * Ramp spacing adjustable from approx. 350 mm up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioners * Ramp lifting aid with spiral spring * Ramps laterally adjustable manually with bar * Square ribs welded on the

Year of construction: 2002, condition: excellent (used), complete autoclav for impregnation of softwood. Length 18m. Including lories, no rails Isdpfx Asiyw Rbjfisih

Condition: used, Year of construction: 2020, carrying capacity 5000 kg length 5000 mm width 2000 mm height 500 mm weight 1250 kg length in total ca. 6300 mm transport measurements ca. 5900x2000x500 mm Like new, only used 3 times Heavy-duty trailer with double swivel steering Isdpfxjw I Hqws Afieih - Small turning circle - Tilt-proof thanks to steering angle limiter - Robust, low maintenance - Reversible drawbar - 30 mm impregnated wooden support. - Coupling eye diameter 40 mm - Tire dimensions approx. 425 x 260 mm

Condition: excellent (used), Set of 2 autoclaves for wood impregnation. Internal diameter: 1950 mm Iisdpfx Afow S N Awsioh Total length: 13,500 mm + 3 tanks for impregnant

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Stergaz autoclave Year of production: 2007 Technical condition: very good Autoclave + two tanks Technical data: - design pressure: 10 bar - design temperature: 40C Isdpsvu Ibyjfx Afisih - minimum / maximum temperature: 0/40 degrees Celsius - welded joint coefficient z = 0.7 - capacity: V= 84 800 L - material St 41K - casing thickness: 24mm - crown 26mm - bottom thickness: 26mm - vacuum: 90% - medium: water + impregnant

Condition: excellent (used), functionality: fully functional, Holtec dipping tank / impregnation plant, double-walled. Dimensions: 12.5 m length, 1,500 mm width, 1,500 mm height. Iisdow Smxiepfx Afieh Lifting frame with 8-ton load capacity. Hydraulic hold-down device. Traveling roof structure. Hydraulic power unit and Siemens PLC control.

Condition: new, overall weight: 40,000 kg, maximum load weight: 30,860 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment features. Complete equipment details available upon request. Frame: * Steel welded construction with front frame drop, beveled front corners and rear taper, drive-on slope with central excavator bucket recess = rear depression between the longitudinal beams, approx. 2,300 mm long * Integrated into the outer frame: 4 pairs of approx. 4t lashing brackets, 7 pairs of recessed, retractable approx. 10t lashing rings (2x on the raised deck, 1x in the front angled drop, 3x in the low bed between the wheel recesses, and 1x in the drive-on slope) Iiodpfewx Ddqex Afieh 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located behind the front drop including one-piece drive-over aluminum cover, for a max. surface load of approx. 11,650 daN each * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), located between the 3rd and 4th axles with one-piece drive-over aluminum cover, suitable for transporting wheel loaders with wheelbase approx. 2,700 – 3,600 mm and wheel diameter approx. 1,485 – 1,740 mm * Rear wheel loader overhang max. 2,220 mm * Width between wheel recesses approx. 1,255 mm (= outer/outer longitudinal beams) * Reinforced slewing ring bearing for total weight 44 t Frame attachments: * 5 pairs of receptacle pockets in the outer frame for square tube posts approx. 100 x 50 x 5 mm (3x in the low bed and 2x on the raised deck) * 4 pairs of foldable approx. 10t lashing rings, arranged as follows: 1 pair at the front on the raised deck, inside the longitudinal beams; 1 pair at the very rear in the excavator bucket recess left and right; 1 pair at the front of the raised deck before the frame drop, inside the longitudinal beams; 1 pair at the rear of the low bed before the drive-on slope, in the excavator bucket recess left and right Towing device: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked design, silent bushing mounting, drawbar retainer spring with adjuster * Truck coupling height from approx. 775 mm to approx. 975 mm * Drawbar length approx. 1,800 mm Support device: * 2 hydraulic support legs at the rear – individually operated, controls housed in separate stainless steel box Axles: * SAF air-suspension low-loader axles with drum brakes, load capacity approx. 11t/axle * S-cam brake approx. 300/200 mm * Automatic brake adjusters Wheels: * 16 tires, 245/70 R 17.5, 146/146F, Conti HTR2 brand * 16 steel rims 6.75 x 17.5, offset, painted black * Black plastic lug nut covers Brake system/Suspension: * Two-line compressed air brake system per ECE regulation R13 * Brake system brand: Wabco * EBS system 4S3M, 1st + 3rd axle monitored * RSS/RSP – Stability program * Spring-loaded parking brake on 3rd + 4th axle * Aluminum air tanks * Brake/air connection lines with 2 single coupling heads, yellow/red * EBS/ABS connection cable * Elastic strap as holder for EBS and electrical plugs * Air suspension with lifting and lowering device, each operated separately front and rear; automatic ride height reset at 15 km/h Floor: * Softwood flooring approx. 50 mm, impregnated, projecting approx. 5 – 10 mm above frame upper edge * Steel checker plate cover over rear wheels Ramps: * 2 folding two-piece steel drive-on ramps, hydraulically extendable, gradient approx. 10 degrees, length approx. 2,750 + 1,350 mm, width approx. 800 mm, with hardwoo

Condition: new, 16000 kg length 6000 mm width 2500 mm loading area height 700 mm Heavy-duty trailer - industrial trailer - Made in Germany - Available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for Iiedpfx Afehrrp Roioh life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø425mm, total width 300mm and ball bearings.

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem Iiedpfxerhilxs Afieh o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Condition: excellent (used), IwoTech Wood Treatment Autoclave, 161 m³, 12 bar For sale: fully operational wood impregnation autoclave manufactured by the renowned company IwoTech A/S. This large-capacity unit is ideally suited for professional treatment of significant volumes of timber, making it an attractive solution for sawmills, construction companies, and manufacturers of outdoor landscape elements. Key technical parameters: Manufacturer: The Danish Treting Co Ltd, IwoTech A/S, DK-7330 Brande Serial number: 10838 Year of manufacture: 1996 (reconstruction date: 26.08.1996) Volume: 161,000 liters (161 m³) Design pressure: Internal: 12 bar External: -1 bar (vacuum) Permissible operating pressure: -0.95 to 10 bar Iedpfx Afew S Nz Tsisih Design temperature: 50°C Dimensions: Internal diameter: 3,000 mm (3 m) Total length: 21,425 mm (21.425 m) Material: HSB 40 SS steel Weld factor: Z = 0.8 Pressure test (hydrostatic): 16 bar Hydrostatic test date: 26.08.1996 Application: Pressure-vacuum impregnation of wood. Additional equipment: Feed valve: 1 pcs Discharge valve: 1 pcs Drain valve: 1 pcs Two impregnant storage tanks Temperature measuring device: 1 pcs Pressure measuring device: 1 pcs Condition: The autoclave is in good technical condition and ready for operation. Supplied with full documentation, including certificates and technical drawings confirming its parameters and compliance with standards (EN287-1). This is a reliable unit that will provide many more years of service. Set includes: - Complete autoclave - 2 impregnant storage tanks - Full technical documentation, drawings, and certificates (including hydrostatic test report). Please contact for more information or to arrange an inspection.

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, Sarmax Apache 15 impregnation line year 2016 (USED working by the Customer from whom it was collected) Isdpfxsvy Enho Afioih Complete with loading and unloading roller conveyors

Year of construction: 2010, condition: excellent (used), Thumm SU100 P current UV dip impregnation system with exhaust air cleaning system Iijdpohuffcofx Afieh Current UV impregnation is an innovative dip process for low-voltage round wire windings.  In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow.  When the heated winding is immersed, the impregnating agent becomes thin and can thus penetrate into the smallest cavities.  With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can flow off again after dipping on the cooler stack of sheets. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the stack of sheets. The elimination of conventional oven drying saves energy and time. Together with the use of a low-emission impregnating agent, the environmental balance is very positive. Thumm electric UV dip impregnation system Type: SU100 P Stators: max. 250 mm Ø  Connected load: 15 kVA Fuse: 32A Connection: 3 phase 400 Volt 50 Hz Power supplies 2 x 50V / 280 A Thumm aerosol separator 400 V 1.85 KVA Complete plant closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, loading space length: 4,900 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, loading space volume: 24 m³, color: white, number of seats: 3, Equipment: air conditioning, HIRE PURCHASE * LEASING* FINANCING AT TOP CONDITIONS Iveco Daily 35S18HA8  MY24  Wheelbase 4100 mm, single rear axle wheels Color: white (Iveco 50105) EURO 6 Engine: capacity 3.0 liters Maximum power 176 HP (130 kW), maximum torque 440 Nm in the range of 1600 rpm, 4 cylinders in a row, Variable geometry turbocharger VGT Gearbox: 8-speed automatic Braking system: discs on both axles (ventilated at the front) Electrical installation: 12V, Tires / wheels: 225/65 R16C, single rear axle wheels Front suspension: independent with torsion bar integrated with the telescope Double acting shock absorber Rear suspension: rigid Beam, leaf springs with bumpers, stabilizer. Hydraulic telescopic shock absorbers Iiedpfxevpcu Rs Afioh Two-way action Axle pressure: front 1900 kg, rear 2240 kg Driving safety is ensured by the following systems: ESP 9, ASR, ABS, EBD, Hill Holder, MSR, HBA, LAC, TSM, RMI&ROM Above-average equipment: COMFORT PLUS: ? NAVI MY IVECO infotainment system with 10-inch display ? Attack cruise control (ACC) with radar sensor ? Cabin ventilation and heating system with automatic air conditioning ? Padded comfortable driver's seat (3 adjustment levels, lumbar support, armrest) ? Front fog lights ? USB A+C socket on driver and passenger side ? Full headrests covered with memory foam, Daily logo ? Fixed 2-seater passenger bench with folding table, 3-point seat belts STYLE: ? Daily radiator dummy with chrome strip ? Leather steering wheel ? Full LED lights (day, dipped beam, road) Additionally, the price of the vehicle includes: 73024 - Side mirrors on the shoulders 2.35 m 06064 ? Double parabolic springs for models Building type: International.   Approximate dimensions: - Intr. length 5000 mm, - Internal width 2250 mm, - Internal height 2350 mm, Standard equipment: ? Intermediate frame with ground binding: aluminum stays + aluminum crosses ? Anodized aluminum sides with a height of 400 mm on Sunday, over 3600 mm length internal split buildings ? Climbs for quick disassembly and side loading ? Aluminum frame under the tarpaulin lined with impregnated wooden slats ? Flooring with 15 mm thick waterproof non-slip plywood ? Plastic wheel arches with anti-mud aprons mounted above the rear axle wheels ? Entrance step on the rear ? Front wall of the side + impregnated wooden boards ? Fasteners made of anodized aluminum ? Contour handles that prevent the load from moving during transport, the amount depends on the length of the installation ? Tarpaulin in any color, translucent roof (close with a cable) ? Foldable side anti-run slats (set) Additional equipment included in the price: ? 1-sided sliding tarpaulin with tension ? Sleeping cabin (TopSleeper) CARPOL ELKA ? Rolled rear tarpaulin ? Toolbox ? Water tank ? Auxiliary heater ? Rolling rear tarpaulin Welcome to carmax24 Today you have the opportunity to purchase one of our selected, tested vehicles. Expert-tested and high-quality vehicles ensure high customer satisfaction and have done so since 2008. This is our daily approach, because you as a customer are our number one priority at carmax24

Condition: new, functionality: fully functional, machine/vehicle number: G-CL-270-FN-EC-EX, input voltage: 230 V, overall weight: 60 kg, total width: 500 mm, total length: 400 mm, total height: 755 mm, volume flow: 270 m³/h, noise level: 61 dB, ISI G-CLEANER - ATEX Mechanical air filter device (without intake plate / separate determination) Iedpfxjvrykhs Afieih Type: 270 FN Version: Mobile Control: without ATEX: "e" II 3 G Zone 2 Horizontal, mobile mechanical air cleaner with EC radial fan for separating gas in the EX area. TECHNICAL DESCRIPTION: Air volume: - 320 m³/h (free blowing) - 240-270 m³/h (effective) (depending on the filter configuration without capture elements) Air inlet: exhaust air sound box at the rear (optionally 1x100mm / 2x80mm / 4x50mm) Filter configuration: - aluminum mesh coarse filter - Z-Line filter F9 - activated carbon cassette with pressed, specially impregnated shaped carbon ATEX: Group II Gas/dust Fan: according to ATEX II 2G Exh IIB T4 Gb Temperature class: T4 > 135°C Fan: device category 2 Filter system: device category 3 All electrical components are supplied in explosion-proof design. Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: not adjustable Noise level: 61 db (A)) Dimensions: length 400 mm / width 500 mm / height 755 mm Weight: 60 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, SARMAX APACHE 15 IMPREGNATING MACHINE WITH 8 BRUSHES. In good condition, fully functional. Height and width are motorized. Ijdpfxjw E Evze Afioih