Used Impregnation for sale (71)

Condition: used, Width: 2,200 mm Capacity: max. 13,000 L Cpsdpfsx Hf Hcox Ac Neu Height: 3,250 mm Length: 6,000 mm Package size: max. 590 x 100 x 120 cm Impregnation vat or dipping tank Wichmann type 13,000 L for soaking / dipping whole wood packages, equipped with hydraulic lift and circulation pump.

Condition: excellent (used), functionality: fully functional, Complete, fully operational autoclave for pressure impregnation of timber. Tank dimensions: 11,500 mm x 2,500 mm – allows impregnation of approximately 20 m³ of timber per cycle. Complete pressure impregnation system including: - pressure vessel Cjdpfxsyhhxvj Ac Nepu - working tank - vacuum and pressure pumps - loading system on trolley - control system

Condition: used, impregnation container used, good condition container size l x w x H ca. mm 750 x 750 x 1130 with cover membrane pump air operated required space ca. l x w x h mm 1200 x 800 x 1400 weight ca. 200 kg Cpsdpfx Acevwgd Ej Neu located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 250 mm, pass-through width: 250 mm, overall weight: 650 kg, The Ceetec A250 is a medium-sized unit from the series of coating machines and is therefore ideally suited for use in industrial and production facilities, such as paint shops, joineries, sawmills or building supply stores offering facade boards, decking, soffits, structural timber, etc. The device is most commonly used in manual mode, which means that the workpieces are loaded and unloaded by hand. Wooden components are conveyed horizontally through the machine by an automatic feed system. The Ceetec A250 ensures high-quality finishing thanks to its eight rotating brushes, each of which can be individually adjusted. Excess paint recirculates in a closed-loop system through a filter and back into the tank. The closed-loop circuit ensures optimal paint usage. The unit is supplied complete with brushes and a bag filter, making it ready for operation after connecting to a power source. The Ceetec A250 is a standard model, which means it is typically in stock and can usually be delivered at short notice. Brush coaters of the A-series are easy to keep clean. Consumable parts that naturally wear out are stocked in our warehouses, ensuring availability and fast delivery times. Thanks to the modular design of the machines, the operator can handle the replacement of most parts independently. The machine can be additionally equipped with a variety of brushes, bag filters with different mesh sizes, roller tables, and paint trolleys, among others. For processing raw wood, it is recommended to install a cleaning unit to remove dust and shavings before the machine. The device is intended for use with water-based products. ADVANTAGES OF CEETEC A250: Independent adjustment of brush heads Application system using low-pressure nozzles and distributing brushes on all four sides of the workpiece Closed-circuit operation enabling recovery and reuse of excess preservatives Codpfx Ajxhc Tmoc Nepu Adjustable feed speed Can be equipped with a unit for handling short elements (from 800mm) Option to fit a 2m roller table at the machine infeed and outfeed Basic working parameters: Speed: from 18 m/min to 42 m/min Workpiece dimensions: Max. H: 250 mm x W: 250 mm. L: Min. 2000 mm. (other sizes available!) Power supply: 3 x 380 V + PE IP. Class 54 Machine dimensions: 2450 mm x 1200 mm x 2000 mm (height) Net weight: approx. 600 kg

Condition: new, Year of construction: 2019, functionality: fully functional, total length: 6,000 mm, total width: 1,800 mm, Industrial vacuum and pressure impregnation plant designed for efficient and uniform wood treatment. The T10 features a Ø1,800 mm × 6,000 mm autoclave, handling 8–9 m³ of timber per charge, with operating pressure up to 15 bar (abs). The plant is fully automated via PLC, enabling precise control of vacuum, pressure, time and preservative absorption. Built to EN 13445 standards with third-party inspection, it is suitable for modern chrome- and arsenic-free preservatives. Cpedpsx Sdptofx Ac Nou Complete system includes pressure vessel, working tank, vacuum and pressure pumps, cleaning system, trolley loading system and safety features. Ideal for sawmills and industrial wood processors seeking reliable, high-quality impregnation performance. Technical specifications available on request.

Condition: used, Year of construction: 1989, functionality: fully functional, Used dip installation, manufacturer Bachhäubl HS2 12.5 Cpsdpfsx Aktwsx Ac Nsu - 12.50 m long x 1.50 m wide x 1.50 m high, clear internal dimensions; - Year of manufacture: 1989; - Control unit with timer relay for setting immersion time. - Wooden support with frame approx. 7 m long, hold-down device with 7 prongs, approx. 7 m long; - Basin interior in good condition, - single-walled, without collection tray! - Weight approx. 8.5 tons - Transport dimensions approx. 13.00 x 2.35 x 2.80 m - Installation is supplied without impregnation agent and without sludge, - free loaded on truck!

Condition: good (used), Year of construction: 1995, functionality: fully functional, Used dipping plant, manufacturer Wichmann, type WH 6.0 - 6.0 m long x 1.75 m wide x 1.75 m high, clear internal dimensions; - Year of manufacture: 1995; - Control via SPS Moeller PS4 with program selection; Csdpfxjx Akq Ne Ac Nepu - Wooden support approx. 5 m long, hold-down device approx. 5 m long with frame; - Double-walled with leakage sensor; - Internally partially rusted; - Transport dimensions: approx. 7.50 m long, 2.44 m wide, 2.98 m high (with guide rails removed); - Weight approx. 10.0 tons; - Plant empty, loaded onto truck free of charge.

Condition: like new (used), Year of construction: 2019, Partial area dryers IWT, widely used in the automotive industry, Cpsdpfjxxa Nmjx Ac Nju

Condition: ready for operation (used), Year of construction: 2019, operating hours: 250 h, functionality: fully functional, workpiece weight (max.): 100 kg, working width: 500 mm, transport length: 12,000 mm, feed rate X-axis: 90 m/min, feed length X-axis: 12,000 mm, working height: 300 mm, pass-through height: 300 mm, type of input current: three-phase, total length: 2,910 mm, total width: 1,300 mm, load capacity: 100 kg, overall weight: 1,000 kg, nominal power: 2.3 kW (3.13 HP), Schiele Impregmat EVO – Professional Impregnation and Coating Machine This robust industrial Schiele Impregmat EVO is a fully automatic coating and impregnation machine, designed for high-quality and loss-free impregnation, glazing, and coloring of planed and sawn wood materials.​ Cpodpfxexvp Sxj Ac Nou Technical Features: The machine is equipped with a patented double X-overlapping spray system, ensuring even application on all sides without material loss. With 8 or optionally 10 integrated brush stations, the EVO can safely and reliably process large cross-sections and solid workpieces. This makes it ideal for laminated beams, solid wooden beams, and board material.​ Working Range: Up to 500 x 300 mm maximum workpiece dimensions (optionally up to 500 x 500 mm available). Minimum workpiece length approximately 600 mm. The feed speed is variable, about 10-60 m/min., with a working height of approximately 900 mm.​ Materials and Durability: The entire frame is made of stainless steel (SS), aluminum, and plastic for contact surfaces, providing extreme wear and corrosion resistance. All drive elements are externally mounted and protected against corrosion. The brush movements are lateral and mounted on the top, preventing medium from entering the drive mechanism.​ Applications: Suitable for water-soluble impregnation and paint media, salts, oils, tints, and thin-layer varnish with a maximum viscosity of 25 seconds DIN 4 jar. Also suitable for solvent-containing materials.​ Efficiency: Special overflow nozzles ensure ideal saturation of all hard and soft wood areas. Filtered material is returned to the circuit, resulting in material savings and cost efficiency.​ Advantages: This machine is known for its precision, consistent production quality, and reliability. Automated impregnation results in uniform finishing and minimal material waste. Suitable for professional woodworking companies, window frame manufacturers, and building material suppliers.​

Condition: used, Flood nozzle zone: - 8 pieces, 3 flood nozzles, adjustable, from above Codpeu Tttyefx Ac Njpu - 10 pieces, 3 flood nozzles, adjustable, from below - Material-carrying parts made of stainless steel - With pump unit for the flood nozzles Drying zone: - Air circulation fan with soundproof housing, dimensions 1190x1190x1170 mm - el. power 15 kW, connection diameter DN 300 mm - Air circulation system incl. fan (see pdf.) - 4 nozzles, each 1300 mm wide, for drying from above, adjustable - 4 nozzles, each 1300 mm wide, for drying from below, adjustable Transport system: - Transport system Stainless steel disk roller conveyor Technical data: - Manufacturer Finnrose - Type. Impregnation 1300 - Year of construction 1999 - Working width 1,300 mm - Max. Part height 300 mm - Shortest part length 300 mm - Length 4,000 mm - Width 1,860 mm - Height 2,200 mm - Location, in stock

Condition: excellent (used), Set of 2 autoclaves for wood impregnation. Internal diameter: 1950 mm Total length: 13,500 mm + 3 tanks for impregnant Cpsdpjw S N Awofx Ac Nou

Condition: new, A2C develops, manufactures, installs, and maintains a wide range of effective, reliable, and efficient solutions for all companies in the wood processing industry. Our qualified and experienced team offers you the optimal equipment for your projects. A2C offers equipment for four application areas: Cpodpfx Acownqn Ij Neu – Wood processing (e.g. impregnation tanks), – Robotics, – Logistics, – Handling (loading containers) Please feel free to contact us.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Deilman S, Second hand but fully renovated dipping tank for wood treatment. 6,5m long, 1,35m wide and 1,5m high with loading platform 6m. Automatic steering with 4 programs of dipping. Ready for work. Can dipp packets 1,2 x 1,2m - ideal for pallet boards Cpsdpfxjudwdwj Ac Nsu

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, SARMAX APACHE 15 IMPREGNATING MACHINE WITH 8 BRUSHES. In good condition, fully functional. Height and width are motorized. Cedjw E Evzjpfx Ac Njpu

Year of construction: 2010, condition: excellent (used), Thumm SU100 P current UV dip impregnation system with exhaust air cleaning system Current UV impregnation is an innovative dip process for low-voltage round wire windings.  In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow.  When the heated winding is immersed, the impregnating agent becomes thin and can thus penetrate into the smallest cavities.  With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can flow off again after dipping on the cooler stack of sheets. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the stack of sheets. The elimination of conventional oven drying saves energy and time. Together with the use of a low-emission impregnating agent, the environmental balance is very positive. Thumm electric UV dip impregnation system Type: SU100 P Stators: max. 250 mm Ø  Connected load: 15 kVA Fuse: 32A Connection: 3 phase 400 Volt 50 Hz Power supplies 2 x 50V / 280 A Thumm aerosol separator 400 V Cedpfohuffcsx Ac Nepu 1.85 KVA Complete plant closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, Sarmax Apache 15 impregnation line year 2016 (USED working by the Customer from whom it was collected) Cedpfsvy Enhex Ac Nspu Complete with loading and unloading roller conveyors

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² Cpsdpfxjxrpmzs Ac Nou The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Condition: new, maximum load weight: 30,860 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate delivery and short-term availability, on our website. Excerpt from the equipment list. Full equipment details available upon request. 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the neck bend, including a one-piece drivable aluminum cover, suitable for a maximum surface load of approx. 11,650 daN/piece * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), located between the 3rd and 4th axles, including a one-piece drivable aluminum cover * Suitable for transporting wheel loaders with a wheelbase of approx. 2,700 - 3,600 mm, wheel diameter approx. 1,485 – 1,740 mm, maximum rear overhang of wheel loader 2,220 mm * Width between the wheel recesses approx. 1,255 mm (= outer edge to outer edge of the longitudinal beams) * Reinforced slewing ring for a total weight of 44 t Frame attachments: * 5 pairs of stake pockets on the outer frame for square tube stanchions approx. 100x50x5 mm (3 in the low bed and 2 on the raised platform) * Low bed platform on both sides with extendable widening sections with approx. 50 mm softwood planks * 4 pairs of foldable lashing rings, approx. 10 t each, positioned as follows: 1 pair at the front of the raised platform, inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front of the raised platform before the bend, inside the longitudinal beams, 1 pair at the rear of the low bed right before the drive-up slope, in the excavator bucket recess left and right Drawbar: Fixed drawbar with approx. 50 mm heavy-duty draw eye, cranked version, silent bushing mounts, drawbar holding spring with tensioner Truck coupling height from approx. 775 mm to approx. 975 mm, drawbar length approx. 1,800 mm Support equipment: * 2 hydraulic rear supports – individually operable, control located in a dedicated stainless steel box Axles: * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Cjdeyhkrxspfx Ac Njpu Wheels: * 16 tires 245/70 R 17.5, 146/146F, make: Conti HTR2 (tire load capacity approx. 12t / axle) * 16 steel rims 6.75 x 17.5, with offset, painted black Brake system/Suspension: * EBS system 4S3M, 1st and 3rd axle monitored * RSS/RSP - stability program * Air suspension with lifting and lowering function, front and rear can be operated separately Assistance/Safety systems: * SWIT - Schwarzmüller Intelligent Telematics Floor: Softwood flooring approx. 50 mm, impregnated, protruding approx. 5–10 mm above the top edge of the frame, steel checker plate cover above rear wheels Ramps: 2 foldable 2-section steel loading ramps, hydraulically extendable, slope approx. 10 degrees, length approx. 2,750 + 1,350 mm, width approx. 800 mm, with hardwood surface approx. 50 mm impregnated Ramps can be adjusted in width from a minimum interspace of approx. 250 mm up to a maximum total width of 3,000 mm. Ramps can be locked in transport position by a hydraulic locking block, ramps remain in the uppermost position without additional securing, control located in a dedicated stainless steel box. Hydraulic ramp lifting equipment operated via existing 2-line truck connection. Pressure-lock quick couplers BG3 (plug diameter approx. 20.5 mm) on the trailer/semitrailer. Pressure line on the right in direction of travel, return lin

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Stergaz autoclave Year of production: 2007 Technical condition: very good Autoclave + two tanks Technical data: Cpedpovu Ibyjfx Ac Nou - design pressure: 10 bar - design temperature: 40C - minimum / maximum temperature: 0/40 degrees Celsius - welded joint coefficient z = 0.7 - capacity: V= 84 800 L - material St 41K - casing thickness: 24mm - crown 26mm - bottom thickness: 26mm - vacuum: 90% - medium: water + impregnant

Condition: new, 6000 kg length 3000 mm width 1600 mm height 570 mm fest lenkbar size of tyres 406 x 127 mm Csdpeygx Apofx Ac Nspu dimensions of the machine ca. 3,99 x 1600 x 570 mm Heavy-duty trailer with - turntable steering - robust, low maintenance - 30mm impregnated wooden platform - Standard paint finish varies. Available in your RAL color upon request. Need other load capacities and dimensions? Please contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, suction capacity: 1,100 m³/h, Welding Fume Extraction, Dust Extraction, Self-Cleaning, Pneumatic with Vacuum Filter. This unit is designed for the extraction and purification of dry dust generated during welding, grinding, polishing, casting, and cutting of metals and plastics. It features a three-stage filtration system with integrated primary filter element regeneration. Contaminated air passes through a metal pre-filter (spark arrestor), a main filter cartridge, and a discharge filter made from activated carbon-impregnated fleece. The regeneration of the main filter element, which utilizes compressed air to clean the filter cartridge from accumulated contaminants, is equipped with its own 10-liter compressed air tank. The unit is recommended for applications requiring continuous extraction and filtration of airborne pollutants. Extraction arms with a reach of 3 or 4 meters are recommended as accessories. The illustrated EC model is characterized by the following features: - Fan with brushless EC motor and 0.78 kW inverter, sound-insulated - Advanced next-generation EC motor design – ensures energy efficiency, precise speed control, and quiet operation - Reliable induction motor – robust and reliable solution that guarantees high performance and trouble-free operation even under demanding conditions Maximum Capacity: 1,100 m³/h Automatic filter cartridge cleaning Self-supporting extraction arm (L = 3.0 m, d = 160 mm, hood diameter 315 mm) Three filtration stages: • Coarse pre-filter (30% metal content, G2) • Main cartridge filter with 99% separation efficiency for particles ≥ 0.5 µm • Coarse final filter (70% activated carbon, G4) PTFE membrane filter (filter class F9) Coarse dust container below pre-filter Grid and dust container below main filter Welded steel enclosure with powder coating Noise level: 64 dB(A) Various configurations available to meet customer requirements. Applications: - Welding shops - Metalworking industry - Grinding and polishing stations Csdpenabuzofx Ac Nopu - Plastics processing and machining This unit is ideal for environments that require constant and effective filtration of dry dust from the air. Made in Poland. The listed price applies to the model shown. Machine warranty: 12 months

Condition: used, mileage: 241,519 km, power: 88 kW (119.65 HP), fuel type: diesel, gearing type: mechanical, first registration: 04/2010, emission class: euro4, color: white, number of seats: 2, Equipment: ABS, air conditioning, electronic stability program (ESP), Citroen Jumpy L3 H1 Long Version New TÜV Inspection Sale to businesses, trade, and export only! Cargo Area Dimensions: Length: 2800 mm Width: 1600 mm Height: 1300 mm Special Equipment: - Electrically adjustable, heated, and foldable exterior mirrors - Increased payload - Full-size spare wheel - Front side airbags Additional Features: - Driver and passenger airbags - Single passenger seat Cpsdpfx Aoyflrbjc Neu - On-board computer - Rear wing doors without window glazing - Body/build: panel van - Bulkhead without window - Adjustable steering column (steering wheel) - Right-side sliding door - Colour-impregnated side protection strips - Seat upholstery: fabric/artificial leather combination - 7x16 steel wheels Sale to businesses, trade, or export only. Delivery within Germany available for an extra charge. Browse our full stock of 150 immediately available transporters and book your test drive today. We look forward to your visit! * TEST DRIVE * Your trust is in good hands with us. To ensure you feel confident and secure when purchasing your desired vehicle, we always offer a non-binding test drive. * TRADE-IN * We are happy to provide a fair offer for your current vehicle. * FINANCING OR LEASING * Financing or leasing is available with low monthly rates, even without a down payment. * Together, we will find an affordable and tailored financing offer for you. * HANDOVER INSPECTION * A thorough handover inspection is part of our excellent customer service. * EXPORT PROCESSING * To EU and third countries * Preparation of all necessary documents, export paperwork, registration plate service * REGISTRATION * Available for customers in the local region * Temporary license plates * USED VEHICLE WARRANTY * VEHICLE PURCHASE * We buy all vans, trucks, or construction machinery/forklifts All information provided without guarantee. Errors, misprints, and prior sale excepted. The details given in advertisements, online, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability for errors resulting from typographical or data transmission mistakes. Listed equipment should be verified separately if necessary.

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Fruit juice output: 4907 l/h Cpjdpfsx T Aqfex Ac Neu Operation / Control: Control panel, manual Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Year of construction: 2008, condition: used, Manufacturer : Dumoulin Model: TD 20 Year: 2008 Type : Coating pan Coater type: solid drum for impregnation Rotor diameter: Ø 700 mm Rotor depth: approx. 550 mm Unloading: automatic by reversing the rotation of the cylinder Cpjdpfxex R A Tns Ac Neu Spraying: Axflow pump + Endress Hauser Promag 53 magneto-inductive flowmeter (year 2021) Air handling unit : not available, controllable from electrical cabinet. Reference available in documentation Siemens PLC and control panel

Year of construction: 2000, condition: used, Manufacturer : Dumoulin Model : TD 1500 Year: 2000 Type: coating machine Classification: ATEX motorisation and sensors Operating unit: from 4 to 15 kg of mass to be impregnated. Coater type: solid drum for impregnation Turbine diameter: Ø 600 mm Turbine depth: 400 mm Removable mixing blades Materials: 304 L stainless steel Unloading: automatic by reversing the rotation of the cylinder Driven by 0.37 kW geared motor, electronic variable speed drive from 2 to 25 rpm. T°C recorder Cedox R A Rgspfx Ac Nspu Timer Rotor speed indicator Ventilation unit integrated into the frame : 1 x EU 13 air filter (absolute filter) 1 x 0.37 kW electric fan 1 x ADF electric heater (heating element) 1500 W with temperature regulator (sensor) 1 x stainless steel nozzle and blower in the drum