Used Eisele Lms for sale (111)

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. Iedpfx Afju Nigkofoik *

Condition: good (used), Year of construction: 1967, Metal Chop Saw Type LMS I - Year of manufacture: 1967 Iodpfx Asxa Hkmeffoik - 380 Volts - 1450 rpm; 2950 rpm - 1.8 kW

Condition: used, Year of construction: 1989, saw blade diameter 350 mm cutting diameter 115 mm capacity 90 degrees: flat 200 x 80 mm turning speeds 1700/3400 U/min saw-blade dia. 350 x 3.3 x 40 mm motor 400 Volt total power requirement 1.8 / 2.6 kW weight ca. 600 kg range L-W-H 1000 x 850 x 1500 mm - in checked condition - machine video - ?v=k-VA1e8rSJI Equipment: - semi-automatic aluminum circular saw - pneumatic material clamping - stepless adjustment of the saw head lowering speed - machine table with miter adjustment Ijdexabw Uepfx Affsik - machine base frame

Year of construction: 1967, condition: used, machine/vehicle number: 9317, disk of circular saw-Ø: 275 mm cutting area at 90°: 120 x 75 mm cutting area at 45°: 90 x 65 mm Iedpfx Afeb N Eicjfeik rotations of disk: 2000 rpm engine: 380 V, 1,1 kW space needed: 700 x 900 x 1000 mm

Year of construction: 2000, condition: used, Max. saw blade diameter: 350 mm Pneumatic material clamps Micro spray device Iiedow Ddztspfx Affok Saw table can be rotated in both directions

Condition: used, Max. saw blade diameter: 350 mm Manual saw feed Iisdpfjxn Ivgjx Affjk 2 sawing speeds Coolant lubrication

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Iedpfxsxln Uko Affsik Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm

Condition: excellent (used), Year of construction: 2021, feed length X-axis: 4,225 mm, feed length Y-axis: 530 mm, feed length Z-axis: 410 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, - designed for machining aluminum, light metal alloys, PVC - 4 numerically controlled axes: - possible machining from the top and sides with standard tools and from the front Iedpot N Td Esfx Affoik - the control allows linear and circular interpolation of the head movement in three axes as well as two ways of programming: ISO and using a transparent CAD/CAM tool program, - the head moves on a boom over a bed of about 5m. - machine weight: about 3300 kg - the base is a uniform steel structure, welded and normalized, with the surfaces under the guides machined in a single mount, - leveling of the machine is carried out by means of adjustable feet, - the shape of the base is designed to facilitate chip removal - the base is placed in a cabin with a cover completely isolating the work zone, - movement along the X, Y and Z axes is carried out on rail guides cooperating with rolling linear bearings, the machine has an automatic central lubrication system for these guides. - maximum head power 6 kW, S1 (at 6,000 rpm), torque 9.55Nm - adjustable speed up to 18,000rpm, ISO 30 CAN tool holder, X-axis working range of 4,225mm, drive by DC motor with high accuracy reducer and gear wheel - toothed bar transmission, - working range in Y-axis 530mm, drive by DC motor with precision screw - rolling nut unit, - Z-axis working range 410mm, drive by DC motor with precision screw - rolling nut assembly, - range of table angle change (A axis) ±125°, drive by DC motor with planetary gear and brake. - maximum speed of movement in the A axis - 3,600 °/min - Tool cooling by means of impulse cooling and lubrication system. - with standard chucks when machining from three sides, in one clamping it is possible to machining in the area of 4,013mm x 200mm x 177mm, - maximum cross-section of machined profile from three sides 200x200mm - with standard chucks when machining from three sides, in two fixtures it is possible machining in the area of 8,026mm x 200mm x 177mm (the machine treats such a cycle as one machining and informs the operator when the profile is moved), - machining in a larger area is possible, but requires prior checking and depends on the shape of the profile, the machining to be performed and the fixtures. Tool magazine: located in the center of the machine, 10 places - 4 pneumatic clamping chucks (additional chucks possible for an extra charge), - clamping width 230mm, - chucks placed on rail guides for easy sliding, - handle adjustment: - in TM MMI version each holder is equipped with its own drive (simultaneous repositioning). - PC computer of current standard, with keyboard, mouse, network card and 17" TFT monitor - Ability to program machining in ISO code and via graphical CAD/CAM interface

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm Iijdpfou Nit Rox Affok hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: new, Fully automatic sawing and punching or drilling in one machine! For use with Ø 500 or 550 mm saw blades, reversing device for a maximum cut length up to 4000 mm Säge-Stanz Automat Profilma 502 ST-V • For aluminium and plastic profiles • For cutting to length and punching, based on the Profilma 502 model • Fully automatic operation and Säge-Bohr Automat Profilma 502 BG • For aluminium and plastic profiles • Cutting to length, drilling, and thread cutting of up to 4 profiles simultaneously Iisdpex Haftofx Affsk • Fully automatic operation

Condition: excellent (used), Year of construction: 1999, O F F E R We can offer you, subject to prior sale and errors excepted, the following ex stock, without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Model: VMS 370 Year of manufacture: 2000 Max. saw blade Ø: 370 mm Cutting capacity: - Pipes approx. up to 130 mm - Flat material: 200 x 100 / 140 x 100 mm - Solid material (square): 120 mm Note: For mitre cuts, cutting capacities may be somewhat reduced—up to max. 140 mm. Saw carriage stroke, manual, vertical approx.: 200 mm Saw blade speeds: 17–34 rpm Saw blade drive approx.: 2/2.6 kW Total drive approx.: 3 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories/Special features: • Adjustable saw head for mitre cuts at 30° / 45° / 90° via scale • Pole-changeable three-phase motor with max. 2.6 kW drive • Manual feed of saw carriage with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant system with chip collection tray • Roller conveyor material feed approx. 2,000 mm • New saw blade installed, 2 spare saw blades included • Electrical system recently overhauled Ideal machine for locksmithing and metalworking shops. Condition: Very good – ready for demonstration – very smooth running Delivery: Ex stock, as inspected Iijdpfsx A H Rrox Affek Payment: Net, strictly after receipt of invoice We look forward to your order. We also have larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Further saw machines always available—please enquire.

Year of construction: 1997, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Iiodpfx Ajx Ecg Usffsk Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 550,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Ijdjvtarnopfx Affoik Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display.

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Iiodsx Avtvopfx Affek Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Year of construction: 2007, condition: used, Technical details: saw blade diameter: Ø 400 - 450 mm hole of sawblade: Ø 50 mm revolution per minute: Spindel: 6 / 12 / 24 / 48 (2 step) U/min revolution per minute: Motor: 1400 / 2800 U/min cutting range 90 degrees: round: Ø 150 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400x30 / 345x70 / 300x95 mm table-size: Ø 700 mm table rotating: 360 ° air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1900 kg Iedpfx Aju Nimqsffjik dimensions of machine: T:1,5 x B:1,0 x H:2,35 m CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAW MACHINE - UNDERFLOOR SAW Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre: 30° - 45° - 90° Operating pressure/clamping pressure: 50bar / 30bar adjustable Hydraulic pump 2.2 kW power output Coolant system with pump Operation via control panel / two-hand operation *

Condition: new, We offer you fully automatic circular sawing machines and complete sawing centers from the "Profilma", "KS", and "SW" series with blade diameters of up to 650mm. Loading magazines and unloading systems are tailored to your requirements. A high-performance extraction unit with oil mist separator completes the convenience package. Isdpfx Asx E U Dnoffjik Contact us – together we will find the optimal solution for your production!

Condition: good (used), functionality: fully functional, Special price: EUR 2,990,-- net Saw motor, pole-changeable: 1.0 / 1.6 kW 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting capacity at 90 degrees with blade size 360 mm: Ijdpex Exyaofx Affsik round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades Special price: EUR 4,150,-- net, loaded free!

Condition: used, Max. punching force: 100 kN Isdpfx Afexrmz Aefjik Adjustable stroke, max. 50 mm Stroke activation via foot switch Weight: approx. 600 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1015, profiles with dimensions (HxB) up to 100x195mm, 80x200 mm automatic work cycle driven by a 3 kW/400 V, 2850 rpm motor cutting disc d=450x3.8x40mm, z=110 horizontal and vertical material clamping on the feed side dosing spray system horizontal material clamping in the feeder moving both clamping jaws when retracting (prevents scratching of the profile) infinitely adjustable hydropneumatic cutting disc feed cutting disc exiting from the rear Iijdpfxswgmv Sj Affok length of cut sections adjustable in the range of 0-300mm (with reversing device 0-600 mm) setting the cutting length by a handwheel with a mechanical counter maximum width of the cut profile 200 mm cutting range (height x width) 100x195mm, 80x200mm automatic shutdown when material runs out possibility of connecting a dust extractor

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Semi-automatic circular saw for aluminium and non-ferrous metals with PD200-E-7 length measuring system Completely overhauled and fully functional Features: - Large cutting range with saw blade Ø 700 mm - Maximum profile width up to 530 mm, profile height up to 270 mm - Saw blade feed hydro-pneumatically adjustable from the outside - Radial feed movement from bottom to top - Saw motor drive power 7.5 kW - Infinitely variable blade speed adjustment - Metered spray unit - 2 vertical and horizontal clamping devices, each with pressure reduction - Infinitely adjustable feed rate of the saw unit - Manually operated safety guard Iijdjx Eb Anjpfx Affjk Technical data: - Drive: 7.5 kW - Speed: 1300 - 2000 rpm - Cutting speed: 48 - 73 m/sec - Air pressure: 6 - 8 bar - Working height: 970 mm - Weight: 1250 kg - Dimensions: H 1900 x W 1400 x D 1700 mm - Height with guard open: 2450 mm PD200-E-7 length measuring system - Usable as a stop as well as a pusher - Measuring length: 6 m - Positioning control for automatic positioning - Easy-to-read LED display for target length, actual length, and quantity - Positioning accuracy 0.1 mm/m - Piece counter for number of completed pieces / cuts

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm Iijdpfjtxkprex Affjk -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Year of construction: 2023, condition: ready for operation (used), A combined Pressta Eisele system for cutting, shearing, and punching aluminum profiles is available. Throughput capacity: approx. 380000 pieces/month, cycle time: approx. 10s, number of pieces per cycle: 4 parts, cut length: 65mm, tolerance: +/-0.3mm, roller conveyor length: 2000mm, roller conveyor width: 290mm, roller spacing: 250mm, load capacity: 200kg/m, control system: Siemens S7. 1) Saw unit, saw blade diameter: 500mm/550mm, max. cutting height: 95mm, max. cut length: 2300mm, feed length: 800mm. 2) Punching unit, feed length: 740mm, width: 290mm, max. punch stroke: 20mm, punching force: 300kN, double-stroke cycle time: 2s. Documentation available. An on-site inspection is possible. Isdpjx Db U Iefx Affoik

Condition: excellent (used), functionality: fully functional, Largest, fully hydraulic EISELE: weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Motor power: 2.6 / 3.2 kW Hydraulic saw feed Iijdox Dhr Tspfx Affek Hydraulic vise Cutting ranges: 200 x 100 mm (square tube) Mitre cut one-sided 45°.

Condition: ready for operation (used), A high-performance extraction system Pressta Eisele for aluminum chips is available. Filter class: M, max. filling height: 1100mm, max. air volume flow: 4000m³/h, negative pressure: 30mbar, machine dimensions X/Y/Z: approx. 1850mm/1150mm/4700mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Iodex Dcafopfx Affsik

Year of construction: 2024, condition: ready for operation (used), A combined Eisele system for the production of solar components from aluminum profiles is available. Profile processing capacity: 8 pieces/simultaneously, processing time for 8 profiles: approx. 18s, roller width: 500mm, roller distance: 250mm, roller load capacity: 500kg/m, total length: 6000mm, control: Siemens S7-1500. 1) Saw unit: power: 75kW, speed: 3500rpm, saw blade diameter: 500mm, residual piece length: 80mm, cutting range X/Y: 400mm/58mm. 2) Drilling unit: drilling spindles: 2x4, axes: 3, spindle distance: 35mm, spindle set distance: 80mm. 3) Feed unit: feed length range: 2mm-400mm. Without combination drill, saw blade, electric cabel. Documentation vorhanden. An on-site inspection is possible. Ijdpfxsx Db Uzj Affsik