Used Mist Extractor for sale (2,650)

Condition: used, Year of construction: 2018, operating hours: 6,700 h, type of input current: three-phase, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, Oil mist extraction for workshops – Plug & Play filtration tower for extracting oil mist during the emission of cooling lubricants. IVAT Ölnebel-T5K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall ventilation and filtration: numerous manufacturing processes, especially in metalworking, generate substantial oil mist. Very often, extractor systems for coolant recovery integrated into machines are either insufficiently effective or simply not installed. Machine retooling, frequent opening of enclosures, or lack of guarding around machining heads leads to the release of oil mist into working areas, exposing personnel to harmful vapors and mists. Installing a ventilation tower significantly improves air quality at workstations and is the ideal filtration supplement for workshop halls where comprehensive oil mist separation via coolant recovery units is difficult or impossible to achieve. Features automatic air and temperature monitoring in the room. An innovative PLC control system compares input data, detects threshold exceedances in the working area and heat buildup directly under the ceiling, and automatically regulates air quality and temperature. Performance: up to 5,000 m³/h Negative pressure: up to 3,100 Pa Filtration surface: 9 m² Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Knodpfxoxxh Tas Adqjd Several units of this device available.

Condition: used, Oil mist extractor, emulsion mist separator, GTI GT40L, Used machine Manufacturer: GTI Glob Tec Model: GT 40L Overall dimensions: Width: 857 mm Depth: 1319 mm Height: 2287 mm Weight: 400 kg Year of manufacture: 2020 Airflow rate: 4000 m³/h Electrical power: 400V; 3.7 kW Total filter surface area: 38.9 / 108 m² Kedpoxtwncefx Adqsnd Number of filter cartridges: 4 + 2 HEPA Filter types: Stufe1 L1020/300/1 – 4 pcs HEPA LH 1020/1 – 2 pcs

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg Knjdpfx Aju T Hrpjdqod + 5 m cable with plug and throttle valve

Condition: ready for operation (used), Dust and mist extractor DeWalt model DW60 Knsdjxdwn Depfx Adqsd

Condition: good (used), Year of construction: 2019, Mist extractor Kodpfx Astu Uxrjdqond

Condition: new, Year of construction: 2024, Surfaces (mm):1600 x 1600 Knodpfouyh R Aox Adqed Air performance (m3/h): 5000 Suction pipe diameter (mm): 350 Height (mm): 2600 Depth (mm): 600/800

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Kodsxnlwzspfx Adqend Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: used, volume flow: 7,500 m³/h, Oil mist extractor for CNC machines, Donaldson Torit brand filter separator. The unit is designed for filtration of oil mist (emulsions as well as pure oil), vapors and fumes generated by various metal cutting processes. Ksdpfxexd Ry Hs Adqsnd Filtration efficiency reaches 99.97% Model: DMC-D2 Fan power: 7.5 kW Capacity: 7,500 m3/h Filtration area: 40.8 m2 Filter cartridges in very good condition. Stock no.: 1043

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 1,100 kg, filter area: 128 m², suction capacity: 15,000 m³/h, negative pressure: 2,800 Pa, Plug & Play filter tower for exhaust in halls during emission of cooling and lubricating agents. ESTA Filtower L-160 filter ventilation tower. Ideal for aerosols, oil mist, emulsion mist and fumes. Filter ventilation of industrial halls - numerous technological processes in production plants, mainly carried out in metalworking. Often, exhaust systems that recover coolant, installed on machines are not effective enough or are simply not installed on them. Ksdpfsv I Ub Tex Adqend Retooling of machine tools, frequent opening of their housing or lack of construction at the machining heads causes the oil mist to escape outside the area of the machines, into the workplaces of people exposed to inhalation of harmful mists and vapors. Installing a ventilation tower significantly improves the air quality in workplaces and should be treated as an ideal filter ventilation supplement for halls, where the complete separation of oil mist by coolant recovery devices is impossible or definitely difficult to achieve. Applications: - Support for local exhausts -Support for direct exhaust during CNC cutting -Production halls – CNC machines -for improving air quality in production halls year of production - 2015 Efficiency - 15000 m3/h Negative pressure up to 2800 Pa Filtration area - 128 m2 2 x 4 kW fan (possibility of working on 1 fan) Device in very good condition. Stock no.: 0971

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Kjdpfxsnt Uc Rs Adqond Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Condition: used, Year of construction: 2015, operating hours: 1,767 h, type of input current: three-phase, overall weight: 800 kg, total width: 1,300 mm, total length: 1,900 mm, total height: 2,080 mm, filter area: 72 m², suction capacity: 5,000 m³/h, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the device. The fan is located on the clean side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 4 Year of manufacture: 2015 The device has only 1760 operating hours. Fitted with 4 new oval cartridge filter elements. Knodsxyiifspfx Adqjd Filtration surface area: 72 m² Fan power: 5.5 kW Capacity: 5,000 m³/h Inlet diameter: 200 mm Dimensions: Height: 2.08 m Width: 1.90 m x 1.30 m Base: 1.40 m x 1.10 m Warehouse number: 1079

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Kedjvvizkepfx Adqend

Condition: good (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, volume flow: 2,400 m³/h, overall weight: 30 kg, power: 0.37 kW (0.50 HP), noise level: 67 dB, MAKRA oil mist collector system Technical characteristics: Supply voltage: 400 [V] Weight: 30 [Kg] Air volume: 2400 [m³/h] Knodpfxoxxihlj Adqed Cycle: 50 [Hz] Installed power: 0.37 [kW] Noise level: 67 [dB] Machine visible in our premises by appointment. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Features and technical data: - Berkmann extraction systems operate on the principle of displacement flow, meaning that a negative pressure is created on the wall side of the room, while an overpressure is generated on the opposite side by the supply air unit. Kjdpfx Adsxwz H Roqjnd - Almost the entire room air flows in a directed and low-turbulence manner from the supply air side toward the exhaust air side. - Paint mist generated within the flow area is captured and discharged. - With Berkmann extraction systems, air is extracted across the entire area, not just in the collection zone in front of the spray wall as with conventional systems. - This allows larger components to be painted as well. - It is also not necessary to work directly in front of the extraction unit. - The patented 'gap extraction' enables high extraction velocities at all sides (including at floor level, where solvents accumulate). - Due to the special arrangement, extremely large filter surfaces could be accommodated, resulting in very long filter service lives. - Compared to traditional spray booths, Berkmann extraction systems operate with significantly lower air volumes, enabling energy savings of up to 50%. - Includes paint mist extraction unit BASIC 7000 m³/h - With supply air unit - With solvent evaporation unit - System is installed underground with grating cover - Dimensions of grating approximately 3,500 x 3,400 mm - Filter area of the unit: approx. 3.7 m² - Supply air unit approx. 82 kW, type 3072 FL/WW (two-stage) - Solvent evaporation unit approx. 3,000 m³/h exhaust air volume - Motor 1.1 kW - With supply air duct system featuring 4 large-area filter ceilings with explosion-proof lights - With control cabinet featuring microprocessor control - With used Kremlin paint application unit Price excludes dismantling, removal, and collection on site Availability: approx. mid-April 2026 Location: Hesse

Condition: excellent (used), Item description: Ksdpfx Aoxxabpsdqend Oil mist separator LNS FOX WS2 1000/700 ----- Condition of the item: The device comes from a company liquidation. Fully functional. Internal number: H40

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Fan motor power - 2.2 kW Number of filter bags - 1 Power supply - 380 V Rated capacity - 3,300 m3/h Kjdpfsxw Sfkex Adqond Year of manufacture - 2013

Condition: used, Year of construction: 2005, type of input current: three-phase, filter area: 286.8 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation from the renowned brand Donaldson Torit. Suitable for plasma, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located after the filter on the clean side, significantly reducing explosion risk. Ultra Web filter cartridges are pneumatically cleaned with compressed air impulses during operation for high device efficiency. Fan power: 15 kW Capacity: 12,000 m3/h Connection diameter: 315 mm Filter cartridges: 12 pcs. Filter surface area: 286.8 m2 Ksdpfx Adjxxkzmoqsnd Year of manufacture: 2005 Equipped with 'SparkTrap' spark arrestor system. Stock number: 1044

Condition: good (used), Year of construction: 2019, Compact dust extractor, dust extractor, dust extraction blower, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, filter system Cartridge dust extraction system, clean air system, clean air dust collector, clean air extraction system Knedpjxu D Ryjfx Adqod -Filter system: Compact dust collector FELDER type RL 125 mobile dust collector -Nominal flow rate: 1900 m³/h -Exhaust fan: 2.2 kW -Intake manifold: Ø 125 mm -Individual components: automatic pneumatic filter cleaning, chip container, see photos -Dimensions: 1190/890/H1930 mm -Weight: 220 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, filter area: 20.4 m², input voltage: 400 V, volume flow: 3,200 m³/h, overall weight: 336 kg, power: 3 kW (4.08 HP), input frequency: 50 Hz, DONALDSON DMC-D1 Torit Dryflo oil mist extraction and filtration system Technical characteristics : Serial N°: 261-4508 Supply voltage: 400 [V] Weight:336 [Kg] Air volume: 3200 [m³/h] Filter area: 20.4 [m²] Cycle: 50 [Hz] Installed power: 3 [kW] Kodpfxexxid Hs Adqjnd Machine visible in our premises by appointment. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: used, Year of construction: 1997, Suction nozzle diameter: 160 mm Kjdpfx Adjxgn Rhoqond Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Condition: good (used), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Kedorb D Nopfx Adqsnd Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h / 400 V

Condition: used, Year of construction: 2003, filter area: 143 m², suction capacity: 6,000 m³/h, Dust extraction, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum extraction for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency of the unit. The fan is located on the clean side, reducing the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DF+6-Cyclo Year of production: 2003 Filter cartridges – 6 pcs. Filtration surface area: 143 m² Fan power: 7.5 kW Capacity: 6000 m³/h Inlet diameter: 300mm/250mm We also offer, on order, new filter cartridges tailored according to the device's application. Dimensions: Height – 3.05 m Width – 1.85 m x 2.35 m Stock number: 0989 Knsdpfx Ajw I Av Njdqed

Condition: good (used), Year of construction: 2011, Compact dust extractor, dust extractor, dust extraction blower, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, filter system Cartridge dust extraction system, clean air system, clean air dust extractor -Filter system: Höcker Polytechnik Vacomat 200 XPE mobile dust collector -Nominal flow rate: 2260 m³/h -Exhaust fan: 3.7 kW Knedpfx Adsxu Dybsqsd -Intake manifold: Ø 200 mm -Individual components: electric filter cleaning, 3 chip containers, see photos -Dimensions: 890/2620/H2120 mm -Weight: 440 kg

Condition: used, Year of construction: 2010, type of input current: three-phase, filter area: 50 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic and vacuum-type, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2010 The filter is cleaned during operation by compressed air pulses controlled by a microprocessor, ensuring high system efficiency. Low compressed air consumption due to the "Power-Spray" system. The Filtercube central extraction and ventilation unit, equipped with cartridge filters, is the ideal solution for almost any problem involving smoke and dust filtration. The fan is positioned on the clean-air side, reducing explosion risk to a minimum. Applications: - Central extraction system for multiple welding stations - Extraction system for welding robots - Extraction system for thermal cutting and grinding tables - General hall ventilation system (push-pull or displacement system) - Extraction system in combination with extraction tables - Extraction system for grinding non-explosive materials Specifications: - Soundproofed fan housing, power: 4 kW - Capacity: 5,000 m³/h - Negative pressure: 3,000 Pa - Inlet diameter: 315 mm - Filtration surface: 50 m² Knodpfx Aow Aw Nnodqod New filter cartridges tailored to customer specifications available on request. Stock no.: 1047

Condition: good (used), Year of construction: 2010, Compact dust extractor, dust extractor, dust extraction blower, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, filter system Cartridge dust extraction system, clean air system, clean air dust extractor -Filter system: Höcker Polytechnik compact dust collector, type Vacumobil JT300 -Nominal flow rate: 5100 m³/h -Exhaust fan: 7.5 kW -Intake manifold: Ø 300 mm -Individual components: pneumatic filter cleaning, silencer, extinguishing system, see photos -Dimensions: 2900/970/H3130 mm Kedpfx Aow U Dzysdqond -Transport dimensions: Filter 2450/970/H2250 mm Silencer 2600/940/H880 mm -Weight: 900 kg