Used Impregnator for sale (64)

Condition: excellent (used), functionality: fully functional, We are offering for sale two wood impregnation autoclaves from the renowned manufacturer Machinenbau Scholz. Each autoclave boasts an impressive capacity of 78 m³, making them ideal for the efficient impregnation of large volumes of wood. These are excellent machines for sawmills, wood product manufacturers, and wood processing companies. Specifications: ● Device Type: Wood impregnation autoclave ● Manufacturer: Machinenbau Scholz ● Capacity: 78 m³ each ● Units Available: 2 Kedpfewn Rbbox Afiodu Additional Information: ● There is a possibility to purchase both autoclaves. ● The offer does not include disassembly and commissioning services at a new facility, but this is an option that can be arranged with the buyer.

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. Kdedpfx Afjrhidmeiju After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Year of construction: 1991, No. 3130-01 Vacuum and pressure impregnation machine SCHARF Used, year of construction 1991 Gross capacity 15900 liters Length 12000 mm Diameter 1300 mm Carbon steel pressure vessel Incl. mixing tank approx. 1000 liters Incl. storage tank 20000 liters Incl. 3 x 1000 kg Korasit KS2 wood preservative salt Vacuum and pressure impregnation ensures deep and even saturation of the wood with wood preservatives in a shorter time 1. the wood is placed in a sealed chamber 2. a vacuum is created, which removes the air from the wood cells 3. the chamber is flooded with wood preservative 4. high pressure is created, forcing the preservative into the wood structure 5. finally, vacuum is generated again to solidify the impregnating agent in the wood The system worked until it was dismantled; some of the controls and electrics need to be replaced Transport dimensions: Impregnation tank 13000 x 1400 x 2000 mm LWH, weight approx. 10 tons Mixing tank 1500 x 1200 x 1600 mm LWH, weight approx. 200 kg Storage tank 6000 x 2000 x 2800 mm LWH, weight approx. 4 tons Sale on behalf of customer, ex location near 92660 Neustadt, without transport and assembly Errors in description and price excepted Transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Kdedpfx Ajurlrgsfieu Subject to prior sale For used machines, any warranty is excluded, the following applies: ‘purchased as viewed’ Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, A2C develops, manufactures, installs, and maintains a wide range of effective, reliable, and efficient solutions for all companies in the wood processing industry. Our qualified and experienced team offers you the optimal equipment for your projects. Kdjdpfx Aownqn Isfiou A2C offers equipment for four application areas: – Wood processing (e.g. impregnation tanks), – Robotics, – Logistics, – Handling (loading containers) Please feel free to contact us.

Condition: used, Pressure vessel Diameter 1 .400 mm Length 4.100 mm Volume: 6.500 litres of preservative Wood volume: app. 3,2 m3 per charge Pressure: 0 to 3 bar (abs) Material: 10 mm HII boiler plate/P265GH Wood pack size: max 1 ,00 m x 0,80 m x 4,20 m Door: 1 rapid closure door Complete with internal rails and an anti-float sy stem for the trolley s Storage tank placed next to the autoclave Volume: 10.000 litres of preservative Diameter: 1 .600 mm Length: 5.350 mm Material: 5 mm steel plate 1 .0037 acc. to EN10025 Kodpfstnmz Nex Afijdu

Condition: used, Year of construction: 1960, We are closing the production line for decorative paper used in furniture production, including finish foils and paper edges. The entire equipment listed below is now available for sale. Prices are negotiable. For more information or to make an inquiry, please contact us via email or phone. 1. Cerutti Printer + Rewinder + Laboratory Printer Cerutti Printer Year of manufacture: 1987 Control software: No data, manual control Working width: 600 mm to 2200 mm Number of printing columns: 4 Dryer type: Electric Speed: 120 m/min Unwinder: 2-axis Winder: 3-axis Approximately 50 printing cylinders available Automatic ink mixing system Rewinder Year of manufacture: 2010 Working width: Up to 2200 mm Rewind roll diameter: Up to 1000 mm Speed: Up to 300 m/min Automatic web guide system, three cutting knives Shaft diameters: 76 mm and 152 mm Laboratory Printer Year of manufacture: 2018 Control software: LENZE Working width: Up to 730mm Number of printing columns: 4 Dryer type: Oil (one converted to electric) Speed: 100 m/min Shaft diameter: 76 mm 2. Impregnator + Related Equipment Manufacturer: Vits Year of Manufacture: 1970s Working width: 600 mm to 2100 mm Control software: Manual Dryer components: 2 dryers, each 10 m long Installed components: Impregnating tank, varnishing station Dryer medium: Oil, heated by a gas furnace Working speed: Impregnation: 12-17 m/min, Varnishing: 40 m/min, Maximum mechanical speed: 50 m/min Kdedpfev Dxfbox Afisu Resema Cutting Machine Cuts paper rolls up to 600 mm in diameter, with a 152 mm core Kacper Edge Cutting Machine Edge cutting width: 700 mm Automatic web guide system Available knives and sleeves for cutting widths from 16 mm to 60 mm Unwinder and winder shafts: 152 mm Hardo Edge Gluing Machine For applying hot-melt glue to edges, can process up to 4 rolls simultaneously Speed: 35 m/min Power supply: 400V 1 complete unit, 2 units for parts Rewinders for Edges Programmable rewinding meters - 6 units 3. Film Embossing Machine + Related Equipment Full documentation available separately 4. Laboratory Press Year of manufacture: approx. 2015 Heating method: Electric, 400V Maximum temperature: 250°C Cylinder diameter and stroke: 100 mm (distance between press plates) Maximum hydraulic pressure: Not available Heating plate dimensions: 320 mm x 320 mm 5. Other Laboratory Equipment Laboratory dryers: BINDER, up to 300°C Microscope Platform scale: 2000 kg 6. Reactors, Mixers Water-heated jacketed mixer (new), capacity: 1500 l, 400 W Dispersion mixer with two stirrers and interchangeable tanks: 2 x 500 l and 1 x 100 l, speed: 800-1200 rpm, rotor diameter: 270 mm, 400V Slow-speed mixer with two stirrers, capacity: 2000 l Storage tanks: 2 tanks, capacity: 30,000 l For more details or to schedule a viewing, please contact us via email or phone.

Condition: used, functionality: fully functional, Enerpac MP-1000 F 3515BL Multifluid Hand Pump. Specifications: Superior corrosion resistance Impregnated aluminum anodized pump housing with stainless steel internal pumping components Standard Nitrile seals- excellent for demineralized water, oil/water emulsions, water glycols, mineral oils, hydraulic fluids Custom EPDM seals avaliable for use with Skydrol or brake fluids Two speed pumps up to 14,500 psi pressure Externally adjustable pressure relief valve 1/4" NPTF gauge port Maximum Operating Pressure (psi) 14,500 Pressure Rating (psi) 1st Stage 500 Pressure Rating (psi) 2nd Stage 14,500 Cylinder Compatability Single-acting Maximum Flow at Rated Pressure .12 in3/stroke Oil Displacement per Stroke (in3) 1st Stage 3.2 Oil Displacement per Stroke (in3) 2nd Stage 0.12 Maximum Handle Effort (lbs) 99 Piston Stroke (in) 1.04 Valve Operation Manual Power Source Kdsdpfottmnyjx Afiou Manual Weight (lbs) 14.5 Good working condition. Please check out our other listings as well.

Condition: used, axle configuration: > 3 axles, overall weight: 40,000 kg, empty load weight: 8,250 kg, maximum load weight: 31,750 kg, first registration: 05/1995, tire size: 235/75 r17,5 zwilling, Year of construction: 1995, machine/vehicle number: 39500, Further information Main and outer frame made of high-strength double T-profiles, grade ST 52.3, 4-fold longitudinally profiled, with high-strength front and rear ends and crossbars, frame behind the bogie run-through with flat offset offset and rear ramp slope 0.8 m long, lowest floor height due to recessed wheel wells above the rear wheels, front corners of the bogie platform bevelled at 45 degrees. 2 recessed UVV lashing rings each on the bogie platform and the drive-on ramp for attaching tensioning devices Rear end with wide bearings for ramp shaft with 6 bearings. Setiliche protective device with a protective strip according to EC, wheel chocks with clamping safety device Low-maintenance angular roller bearing axles with automatic slack adjusters, dual-line air brake system in accordance with EC and parking brake Bogie and drawbar: : Made of double T-profiles in welded construction with ball bearing slewing ring, standard drawbar length 1500 mm, with 8 eyelets 50 mm on average, drawbar support with threaded spindle as height adjustment device, vehicle has no axle compensation! 24 volt, 2 connecting cables 7-pole interchangeable, large rectangular four-chamber lights incl. shunt lights and reversing lights, distribution box at the front, clearance lights at the rear, side marker reflector lights and holder for single-line license plate Underbody made of 40 mm thick pine wood, pressure-impregnated. Low loading platform and drive-on ramp with crossed top floor 30 mm thick, running lengthwise. Overall floor thickness 70 mm. Bogie platform with longitudinal single floor and recessed, open equipment box, size L 700 x W 800 x D 180 mm Ramps: in shit construction with trough plate, cross beams, wooden decking running lengthwise, 50 mm thick, ramp tip reinforced, ramp holding rods with turnbuckle and safety catch, ramps can be moved on both sides by 470 mm each, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with outer and inner springs for easy one-man operation, with automatic floor supports steel grit blasted, zinc phosphate primed, single color acrylic paint in RAL colors, wheels silver, traffic, light and metallic colors as well as two-tone paint, wood varnished Kedei Rixgopfx Afiodu

Condition: used, Year of construction: 1998, functionality: unexamined, total width: 4,000 mm, total length: 12,000 mm, Vacuum wood drying chamber - diameter 4 m - length 12 m Kdjdjwdupnjpfx Afiou including control cabinet

Condition: ready for operation (used), Condition Used Stock Number 1328 Kjdpfxjvyvk Hj Afiodu This listing is for a Millipore Progard TS2 Pretreatment Pack. The unit is in full working condition and is ready for immediate release. The Progard TS2 Pre-treatment Pack is an essential component for enhancing the performance and longevity of various water purification systems, including Elix, RiOs™, AFS, and Milli-Q Integral systems. Key Features:Particle Removal: Effectively removes large particles and sediments from tap water using a depth filter, which helps maintain the integrity of the downstream purification orine Removal: The inclusion of silver-impregnated activated carbon efficiently eliminates free chlorine from the water, protecting sensitive membranes from oxidative ling Prevention: Polyphosphates in the pack help prevent mineral scaling on the reverse osmosis (RO) membrane, ensuring optimal water flow and anics Protection: The combined components protect against organic fouling, which can degrade the performance of the RO membrane over time. Technology and Monitoring:e-sure RFID Tag:Each pre-treatment pack is equipped with an e-sure RFID tag, providing real-time visibility into the pack’s parameters. This feature allows for easy tracking of replacement timelines and performance monitoring. Benefits:Extended System Lifespan: By removing contaminants and protecting the RO membrane, the Progard TS2 pack extends the operational life of the water purification anced Water Quality:Ensures that the water produced meets the high standards required for laboratory applications, minimizing the risk of interference in experiments or rational Efficiency: With improved protection from fouling and scaling, the overall performance of the water system is optimized, reducing maintenance needs and lications: Ideal for use in laboratories, research facilities, and industrial applications where high-quality purified water is crucial for experiments, analyses, and processes.

Condition: new, We manufacture impregnation systems according to your wishes Image is an example Kjdpfjvw S Ipsx Afiodu We would be happy to make you an offer

Condition: used, impregnation container used, good condition Kodpevwgd Eofx Afiodu container size l x w x H ca. mm 750 x 750 x 1130 with cover membrane pump air operated required space ca. l x w x h mm 1200 x 800 x 1400 weight ca. 200 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: good (used), Year of construction: 1994, MEBA type TBM 12.5 immersion system - 12.50 m long x 1.22 m wide x 1.25 m high, clear dimensions; - Year of construction 1994; - Control TBS 6.9 with program selection, - Wooden support 7 m long, hold-down device 6 m long; - with drip tray, - the system is fully functional, but the paint in the pool has peeled off in some places. peeled off in some places. - Weight approx. 9.5 tons - Transport dimensions approx. 13.15 x 2.10 x 2.67 m - Operating instructions and documentation in German - Plant is empty, free truck! - max. package dimensions 0.75 m high x 1.10 m wide, - loaded free on truck!!! Kdedpfeu E H Tysx Afiou Second-hand dipping plant, product MEBA type TBM 12,5 Dipping basin: 12.50 m long, 1.22 wide, 1.25 high (inner dimensions), year of manufacture 1994, Automatic microprocessor control unit including 16 programs to select the operating cycle and operating time and integrated overflow protection. Wood rest: 7.00 m long, 70 tons carrying capacity, Holding-down clamp: 6.00 m long, Collecting basin: 13.25 m long; 2.10 wide; 1.05 high (outer dimensions), The dipping basin and the drain pan form one unit. Total weight of approx. 10.00 tons, Transport-measure: 13.25 m long, 2.67 m high, 2.10 m wide, Plant works, however the paint has peeled off in individual areas of the basin, wood rest and the holding-down clamp. The plant is empty, loaded free truck. The maximum package size that can be dipped is 0.75 m high x 1.2 m wide.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, MEBA type TBM 12.1 immersion system - 12.10 m long x 1.22 m wide x 1.25 m high, clear dimensions; - Year of construction 1989; - Control TBS 5.2 with program selection, - Wooden support 7 m long, hold-down device 6 m long; partially rusted, - Basin is rusted on the inside, - with drip tray, - Transport dimensions approx. 12.70 x 2.06 x 2.67 m; weight approx. 9.0 tons - Operating instructions in German - System is empty, without impregnating agent, - loaded free on truck! Second-hand dipping plant, product MEBA Type TBM 12.1 Dipping basin: 12.10 m long, 1.22 wide, 1.25 high (inner dimensions), year of manufacture 1989, Wood rest: frame 7.0 m, Kodpfou E H N Usx Afiedu Holding-down clamp: 5 folks 6.0 m, hydraulically working, partially rusted, Drain pan: 12.70 m long; 2.06 wide; 1.02 high (outer dimensions), Total weight of approx. 9.0 tons, Transport-measure: 12.70 m long, 2.67 m high, 2.06 m wide, The dipping basin and the drain pan form one unit. The basin inside is partially rusted, Basin is empty without impregnation solution. Operating instructions in German language. Loaded free truck, The maximum package size that can be dipped is 0.8 m high x 1.05 m wide.