Used Gripper for sale (817)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Dwodpfezqunhex Albeb Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,328 h, functionality: fully functional, machine/vehicle number: 11180000573, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm C-axis indexing: 360° (0.001°) Feed rate: 40 m/min Rapid traverse: 40 m/min Number of pallets: 1 Pallet dimensions, diameter: 1,000 mm Max. workpiece weight: 1,000 kg Max. torque: 7,900 Nm Dwodpfxozxf Ins Albob Max. spindle speed: 18,000 rpm Spindle drive power: 15 kW at 40% duty cycle Spindle drive power: 10 kW in continuous operation Tool interface: CAT 40 Number of tool positions in the magazine: 60 Tool changer: Double gripper MACHINE DETAILS CNC control: 3D contouring control MillPlus Total power consumption: 55 kVA Coolant tank capacity: 600 l Dimensions (L x W x H): 7,000 x 3,500 x 3,902 mm Operating hours Hours under power: 33,831 h Spindle operating time: 6,328 h EQUIPMENT Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Flushing gun Preparation for Renishaw probe Accuracy package Preparation for internal cooling with 40/80 bar Paper band filter

Condition: like new (used), Year of construction: 2020, operating hours: 9,000 h, functionality: fully functional, MG MORI DMC 1150 V Year of manufacture: 2020 Machine type: CNC vertical machining center Travel distances Dodozzm Dpopfx Albewb X-axis: 1,150 mm Y-axis: 700 mm Z-axis: 550 mm Rapid traverse: 42 m/min Direct linear scales in X / Y / Z Work table Table size: 1,460 × 750 mm CNC control HEIDENHAIN TNC 640 3D control DMG MORI ERGOline Control 19" screen Main spindle DMG MORI speedMASTER Tool interface: HSK-A63 Speed range: 20–20,000 rpm Spindle power: 35 kW / 25 kW Torque: 130 Nm / 86 Nm Values specified at 40 % / 100 % duty cycle Active spindle cooling Tool magazine 60 tool positions HSK-A63 Chain magazine Carousel Dual gripper Direct manual tool loading into the magazine Coolant / MQL Internal coolant supply Coolant through the spindle MQL 40 bar Paper band filter Tank capacity: 600 liters Chip conveyor Machine bed flushing Extended machine bed flushing Additional flushing bar on the right side wall Flushing volume manually adjustable Flushing gun for chip removal Enclosure roof Workpiece measurement technology Infrared measuring probe HEIDENHAIN TS 460 Automation DMG MORI PH 150 Pallet loading and unloading system Handling system with pallet magazine Round magazine 2 servo axes: X-axis Magazine table Z-axis pneumatic Gripping arm / fork IPC with touch panel DMG Automation Jobmanager OMRON package Graphically supported operator guidance PROFIBUS interface Automatic loading door on the right side of the machine PROFIBUS communication during the loading cycle 2-channel safety circuits Electrical automation interface version 4.0 4-color signal light Pallet system PH 150 basic round magazine: 10-position System expanded to pallet size: 500 × 500 mm In this configuration: max. 4 pallet storage locations Handling weight expanded to max. 250 kg per pallet incl. load EROWA zero-point clamping system EROWA UPC pneumatic zero-point clamping system Connection coupling on the table 2 active pneumatic lines Pneumatic release via 6 bar system pressure Pressure increase to 7.5 bar EROWA MTS clamping system Zero-point clamping station EROWA MTS Adapter plate: 410 × 410 mm 4 clamping elements Pitch: 250 × 250 mm Pallets 4 × EROWA MTS pallets Pallet size: 498 × 498 mm Pitch: 250 mm Incl. clamping studs and coupling Surface smooth Material: Aluminum The complete photo gallery is provided exclusively upon request. A sale to dealers is currently not possible. The complete order confirmation via DMG MORI will also be sent to you upon request.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 282395, type of input current: AC, total height: 2,500 mm, total width: 4,500 mm, total length: 20,000 mm, overall weight: 2,500 kg, input voltage: 400 V, workpiece diameter (max.): 270 mm, input current: 50 A, input frequency: 50 Hz, Profile Saw-Centre 100, for aluminium profiles, operated directly from SchüCal. * PSC 100 RL: RIght−hand loading, removal from left−hand side. Dwodpfx Alszzkc Aobeb * Flexible preparation regardless of profile system * Automatic process flow * Layout magazine: −With 6 spaces (can be expanded) −For profile lengths from 0.6 m to 7.5 m (can be expanded) −Manual setting on profile width using centrally adjustable stops −Profile dimensions: max. 160 mm wide and 270 mm high * Gripper feed mechanism for feeding profiles into the saw (max. = 120 m/min) * Saw: −Saw blade 550 mm −Automatic angle setting + 45o / 90o and −45o / 90o including intermediate angles −Profile support system adjusts automatically to profile contour −Integral micro spray −Conveyor belt for removal of waste from saw * Profile buffer −Profiles removed by means of a belt conveyor −9 extrusions −Belt length: 1 m −For profile lengths from 0.15 m to 7.5 m * Special stop for automatic cutting * PC touch-screen control * Storage space for label printer * Noise reduction hood * Paint finish: Schüco blue (similar to RAL 5010)

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Equipment: documentation/manual, Man Roland 202 TOB Series 249 Size: 520 x 740 mm 2 colors Very good working condition Man Roland 202 TOB Series 249 Size: 520 x 740 mm Dedpfx Alezzk E Rjbewb 2 colors Very good working condition 4 grippers Weko RCI console

Condition: like new (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: DN1792, Tiger Lifting Equipment – Kurschildgen GmbH, Lifting Equipment Manufacturing Spindle gripper, gripper with handwheel and positively locking gripping arms for lifting a hexagonal contour using a crane. Load capacity: 400 [kg] Type: ST-SU-040-600_6KT-06357 Gripping width: 600 [mm] Dedjzv E Ddspfx Albowb Gripping breadth: 180 [mm] Payload: 400 kg Weight: 75 kg 6 units available!!! Like-new condition with minor signs of use, see images. Item location is 75053 Gondelsheim. See images. Shipping via freight forwarder or collection by appointment only.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 420 mm Travel range Z-axis: 450 mm Distance spindle nose – table: 120–570 mm Speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/air Tool holder: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Dodpfxezzlh Hs Albjwb Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Heidenhain iTNC 620 CNC control system Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with double gripper Central lubrication Large access door to the work area Loading possible from above using an overhead crane Two waterproof work area lights CE certification The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: good (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 18,000 rpm, The complete photo gallery is available only upon exclusive request from end-user customers. DMG / DECKEL MAHO DMF 360 linear Year of manufacture: 2013 Working area X: 3,600 mm Y: 1,100 mm Z: 900 mm Moving table design 2 working spaces for pendulum machining removable working space partition direct measuring systems Dynamics / Axes Linear drive X-axis Rapid traverse X/Y/Z: 80 / 60 / 60 m/min Acceleration X/Y/Z: 5 / 6 / 6 m/s² Active cooling for main spindle and linear motor Swivel head / Main spindle CNC swivel head B-axis Speed range: 20–18,000 rpm Tool holder: HSK-A63 According to DIN 69893 Power: 35 / 25 kW at 40 / 100 % duty cycle Tool magazine 60 tool positions Magazine version compatible with HSK-A63 / SK40 Chain magazine Double gripper Chip-to-chip time: 7.5 s Control system HEIDENHAIN iTNC 530 3D control smarT.NC ERGOline Control 19" screen Table / Rotary table Fixed table: 4,200 × 1,100 mm Integrated rotary table Rotary table Ø 1,050 mm Arranged on the left Max. load capacity: 1,200 kg Hydraulic clamping Hydraulic clamping 30–240 bar 2 circuits Coolant / Production Internal coolant through the spindle 40 bar Coolant system 980 liters Chip conveyor Spray gun Rotary through-spindle Purge air for linear measuring systems Blow-through air through the spindle center Blow-through air selectable via M-function Maintained compressed air with low oil content Dedszznnvepfx Albewb Measuring technology Infrared measuring probe HEIDENHAIN TS 649 DMG Laser tool breakage detection Further standard equipment Automatic working space doors 2 rotating viewing windows 4-color signal light Electronic handwheel Operating mode 4 / Process monitoring Safety package in case of power failure Overvoltage protection Undervoltage monitoring Fast brake control Torque support HSK-A63 / SK40 / CAT40 Tool package for aluminum machining DMG Messenger Web DMG Netservice Client

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Dwodpfxszzlhaj Albob Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: good (used), Year of construction: 1995, operating hours: 43,499 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, 5-Axis Gantry Milling Machine WALDRICH Product manufactured on the machine: AIRBUS LANDING GEAR (aerospace) Year of construction: 1995; Delivery year: 1998 Installation & Commissioning: 1999 Operating period: 03/1999 to 07/2022 (21 years) Condition: Very Good Customer Specifications / History Previous owner (1999–2022): German aerospace group Technical Specifications Travel Distances & Working Area X-axis (longitudinal table travel): 4,000 mm Y-axis (cross-slide traverse): 2,500 mm Z-axis (vertical ram travel): 1,000 mm Clearance between columns: 2,000 mm C-axis: 360,000 positions (increment 0.001°) B-axis: 360,000 positions Tables & Pallets Number of tables: 2 Table dimensions: 1,500 x 3,000 mm Table height above floor: 740 mm Max. table load: 12,000 kg Feed & Rapid Traverses X/Y/Z: Feed 0–6,000 mm/min, rapid traverse 15,000 mm/min B-axis nutator: 0–3,600 deg/min C-axis nutator: 0–3,600 deg/min Feed Forces / Torque X/Y/Z max.: 30 kN each C-axis detachable torque: max. 20,000 Nm C-axis bearing control: max. 4,000 Nm Speed range Djdpsx Hxdzjfx Albswb Stage I: 20–875 rpm Stage II: 876–4,000 rpm Spindle Drive Power: 50 kW Speed range: 20–4,000 rpm Tool Change System Type: Chain magazine Capacity: 120 tools Tool holder: ISO 50 Max. tool diameter: 315 mm Tool diameter at full occupancy: 100 mm Max. tool length: 550 mm Max. tool weight per gripper: 35 kg Spindle Units / Distances Vertical spindle unit: Spindle nose – table surface 250–1,250 mm Horizontal spindle unit: Spindle center – table surface 150–1,150 mm Nutator (MC303): Spindle center – table surface 45–1,045 mm Coolant & Lubrication Coolant supply: internal and external available Lubrication: automatic (spindle bearings and gearbox) Dimensions & Weight Machine dimensions (approx.): Length: 14,700 mm Width: 10,000 mm Height above floor: 6,079 mm Total machine weight (approx.): 72,500 kg Machine bed: 8,500 kg Machine table & pallet: 16,000 kg 2 columns: 10,200 kg Crossbeam with platform: 20,000 kg Special Features & Accessories Fully automatic tool changer (ATC): 120 stations (ISO 50) Fully automatic head changer incl. universal milling heads Milling head: C-axis: 360,000 x 0.001° B-axis: 360,000° Accessories: 3 chip conveyors Toolbox + pallets with loose accessories Packing List (Transport Dimensions) Axes: 8,950 x 1,700 x H 1,000 mm 2 tables: 3,300 x 1,700 x H 340 mm Tool changer with carriage: 3,500 x 2,300 x H 2,670 mm Tool changer without carriage: 4,450 x 1,060 x H 1,870 mm Pick-up heads: 3,000 x 470 x H 2,200 mm Crossbeam: 7,000 x 2,000 x H 2,500 mm 2 support columns: 2,900 x 1,000 x H 1,500 mm Carriage with RAM: 3,450 x 1,800 x H 2,100 mm Chain section: 3,700 x 2,000 x H 1,100 mm Electrical cabinet No. 1: 5,400 x 600 x H 2,000 mm Electrical cabinet No. 2: 2,100 x 650 x H 2,000 mm Chip conveyor: 5,000 x 500 x H 2,300 mm Head: 900 x 600 x H 700 mm Tool case: 2,100 x 1,200 x H 600 mm 7 pallets with loose accessories This WALDRICH SIEGEN 5-axis portal milling machine is ideally suited for machining steel, cast iron and non-ferrous metals. The combination of a 50 kW spindle drive, automatic tool changer (120 stations), fully automatic head changer, and high-precision B/C axis positioning (0.001°) makes it the ideal solution for demanding and complex manufacturing tasks.

Condition: used, Year of construction: 2014, functionality: fully functional, Milling swivel head: - with torque motor and hydraulic clamping - Swivel range +30/-120°, stepless - 14,000 RPM - 160 Nm torque - Drive power 29 kW - Separate spindle cooling for constant temperature Dwodpfx Aezzp E Nolbob - Tool holder DIN SK40 with air blow-out function Integrated rotary table: - with torque motor and hydraulic clamping - Ø 610 mm - Extended clamping area 1,100 x 610 mm General: - 40-position tool changer with dual-arm gripper - Coolant and compressed air gun - Chip conveyor - Coolant system - Electronic handwheel - Work area light Control system: Heidenhain iTnc 530 SmarT.NC HSCI - 15.1'' TFT screen - Ethernet interface - 2x USB port - SmarT.NC-guided programming - Plain text programming - Short sentence processing time - Create a new program while another is being processed - Proven Heidenhain machining cycles - CE certification Options: - Internal cooling system (IKZ), 40 bar, including band filter system - Heidenhain TS640 for DIN SK40 workpiece probing system with infrared transmission - Heidenhain software option 40: DCM Dynamic Collision Monitoring for iTNC 530 - Heidenhain KinematicsOpt incl. Heidenhain calibration sphere KKH 250

Condition: used, Year of construction: 2020, machine/vehicle number: TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €64,000 net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. Djdpfjzzdyzsx Albswb The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. TECHNICAL SPECIFICATION • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €64,000 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further information.If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 100418005, travel distance X-axis: 1,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 590 mm, feed length X-axis: 30,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 30,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, mount diameter: 63 mm, total length: 9,485 mm, table length: 1,000 mm, total width: 4,609 mm, spindle speed (max.): 10,000 rpm, total height: 2,896 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, table load: 300 kg, position of the milling head: Horizontal / Swiveling, workpiece weight (max.): 300 kg, torque: 136 Nm, rotational speed (min.): 3,800 rpm, rotational speed (max.): 16,000 rpm, overall weight: 18,000 kg, working range: 1,000 mm, spindle nose: HSK-A63, tool weight: 6 g, grinding spindle motor power: 54,000 W, spindle motor power: 54,000 W, Equipment: rotational speed infinitely variable, Zero hours HSTM 1000HD 5-Axis Turn-Milling Center Was not used in production / just OEM commissioning and preserved. Basic machine HSTM 1000HD X, Y, Z axis with absolute linear scale A axis Swivel axis / B axis C axis Pressure control of head clamping CNC-control system SIEMENS 840D SL Remote diagnosis system via Ethernet Patrol light Control cabinet with air-condition Milling spindle 16’000 rpm, HSK-A63 Machining hour counter Tool handling system with double gripper Chill unit Hydraulic unit Machine housing with front door L shape Dwsdpfx Aezvuu Sjlbjb Standard machine color scheme Coolant supply unit, low pressure, paper belt filter Flush Gun Chip conveyor Oil Mist exhaust system Documentation 1-fold in English + CD Machine option package Minimum quantity lubrication system High pressure cooling through spindle BEMA automatic adjustable coolant nozzles Tool measuring system BLUM Work piece measuring system BLUM 3D Probe Rotoclear window Handweel HT 2 Automatic operator doors CAD / CAM Software package “ Hamuel Single Blade” CSE Siemens simulation Transportation and lifting tool set Commissioning tool set Geometrical measurement set Available in Bangkok, Thailand Worldwide shipping

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Dwedpjy Hp Rrsfx Albsb Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Complete craft beer bottling line: Cime Careddu GOLD DPS 6/6/1 rotary triblock (rinser – isobaric filler with double pre-evacuation – crown capper) and matching Compatta self-adhesive labeler. Both manufactured in 2018, installed in 2019 by Coenco (official Cime Careddu agent for the Benelux), professionally maintained, with low operating hours. Available immediately from a brewery in Dokkum, the Netherlands, due to production shutdown. 1. Triblock – Cime Careddu GOLD DPS 6/6/1 CROWN Type: rotary triblock (rinser – isobaric filler – crown capper) in stainless steel Year of manufacture: 2018 (serial no. 708) Rinser: 6 grippers, water rinse Filler: 6 isobaric (counter-pressure) filling valves with double pre-evacuation (DPS) and CO₂ pressurization for low dissolved oxygen Capper: 1 head for 26 mm crown caps, with crown feeder Capacity: approx. 1,000–1,200 bottles/hour (33 cl) Bottle formats included: [e.g. 33 cl longneck Ø 60 mm, 33 cl Steinie Ø 69 mm, 75 cl Ø 85 mm – fill in] CIP: cleaning-in-place connections for internal and external sterilization Dedozza Riopfx Albswb Electrical: 400 V / 50 Hz / 3-phase + N Operating hours: approx. [xxx] hours (approx. [xxx,xxx] bottles filled) CE certified, safety guarding fitted 2. Labeler – Cime Careddu / ENOS Compatta Type: linear self-adhesive labeling machine, one label station (front or wrap-around label) Year of manufacture: 2018 (serial no. 720) Capacity: up to approx. 1,800 bottles/hour Electrical: 400 V / 50 Hz / 3-phase + N Manual station adjustment, suitable for round bottles from 25 to 75 cl

Condition: used, Year of construction: 2003, operating hours: 10,000 h, Used Robot Depalletizer Fanuc 2003 – The Ultimate Solution for Depalletizing Operations Are you looking for a reliable and efficient robot depalletizer for your business operations? Look no further than the 2003 Fanuc Robot Depalletizer model M-410 iB 160. Equipped with a pick-up head for cardboard and an available base, this depalletizer is designed specifically for depalletizing tasks. With its intelligent cable routing inside the hollow wrist, high operating speeds, and high inertia and wrist moments, this machine can handle large grippers and heavy payloads with ease. Its 6-axis control servo gripper provides better adaptability in handling products of different sizes. Operating within an optimized workspace and with high vertical travel, this robot can depalletize products up to a height of almost 2.7 meters. The integrated base and controller in the pedestal (or the available non-pedestal version) save floor space and simplifies transportation and installation. Upgrade your depalletizing operations with the 2003 Fanuc Robot Depalletizer – the ultimate solution for efficient and effective depalletizing. With a gripper head for depalletizing one layer of bottles at a time (inflatable) Botte holding system: Dwjdpfx Alovgvx Debeb This Fanuc robot depalletizer has a particular bottle gripper: Use the neck bottle gripping system using inflatable bars. This system helps to process shaped bottles and therefore allows them to be deposited on the loading table with irregular bottles. The classic push system has this limitation, it cannot process bottles other than round ones. But the Fanuc robot depalletizer has a speed of 200 layers per hour to a maximum of 12,000 BPH. Another important feature is the space required to work with that equipment, compared to traditional systems at least 50% of the usable surface is saved; for the same performance, a robot is always preferable, also because being able to change the bottle gripper, all types of bottles can be processed with very high peak loads.  

Condition: used, Year of construction: 2003, operating hours: 10,002 h, Used Robot Palletizer Fanuc 2003 – The Ultimate Solution for Palletizing Operations Are you looking for a reliable and efficient robot palletizer for your business operations? Look no further than the 2003 Fanuc Robot Palletizer model M-410 iB 160. Equipped with a pick-up head for cardboard and available base, this palletizer is designed specifically for palletizing tasks. Dsdpfx Alovgvx Robjwb With its intelligent cable routing inside the hollow wrist, high operating speeds, and high inertia and wrist moments, this machine can handle large grippers and heavy payloads with ease. Its 6-axis control servo gripper provides better adaptability in handling products of different sizes. Operating within an optimized workspace and with high vertical travel, this robot can develop pallets up to a height of almost 3 meters. The integrated base and controller in the pedestal (or the available non-pedestal version) saves floor space and simplifies transportation and installation. Upgrade your palletizing operations with the 2003 Fanuc Robot Palletizer – the ultimate solution for efficient and effective palletizing. With gripping head for cardboard

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 43600, load capacity: 5,000 kg, We are selling a well-maintained, single-model 6-unit Hywema mobile grapple system. Dodpfxjzqtdbj Albewb Equipped with a 6-unit control unit. Total lifting capacity: 30,000 kg (all 6 lifting cylinders). The system has been refurbished and inspected. It can be tested and inspected upon request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station Dwsdpfxjyzh Ulo Albob - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: excellent (used), Year of construction: 2012, operating hours: 20,101 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 70 kVA, controller manufacturer: Siemens, controller model: 3D-Control Siemens 840D, workpiece height (max.): 525 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 240 kg, total height: 2,800 mm, total length: 4,700 mm, total width: 6,000 mm, table load: 240 kg, rotary table diameter: 500 mm, overall weight: 12,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 20,101 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 300 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 600 Y-axis travel mm: 500 Z-axis travel mm: 500 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Distance spindle nose - table surface mm: 600 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: 500x525 Max. workpiece weight kg: 240 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Max tool weight kg: 6 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Mist collector Programmable coolant nozzles DXF import function Internal coolant supply Electrical cabinet active cooling unit Temperature compensation Paper band filter DMG AUTOshutdown DMG GREENmode DMG MACHINEcheck High-Speedd-Setting DMG Netservice-client DMG Service Agent Machine running times Under power: 35687 Spindle Working: 20101 Rated power kVA: 70 Basic machine dimensions / weight Length mm: 4700 Dwjdpfxszd Agrs Albeb Width mm: 6000 Height mm: 2800 Weight kg: 12000

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at ). Two-shell grapple with extension / Grapple / in stock & immediately available Price: €3,990.00 net / €4,748.10 gross - Overall length (mm): 3,600 - Weight (kg): 1,640 - Shell width (mm): 1,080 - Opening width (mm): 1,800 You can find the exact technical dimensions in the attached images. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. Dwedpfx Aozffl Hjlbsb We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale are subject to change! Internal No.: 619003 = More information = Application: Construction Unladen weight: 1,640 kg Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, Mr. Herden (tel. ) will be happy to assist you. Kinshofer demolition grapples / grapples / MS21 / MS25 / incl. rotator / in stock & immediately available Price: €8,890.00 net / €10,579.10 - Shell width (mm): 1,150 - Capacity (liters): 800 - Weight (kg): 1,780 - Operating weight (t): 20 – 27 Dedpsznrrfsfx Albowb Equipment: - Incl. MS21 / MS25 mount - Incl. rotator - Incl. hydraulic hoses, see photos In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp telescopic loader sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = Intended use: Construction Unladen weight: 1,780 kg Please contact Marius Herden for further information.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: Dwjdpfx Alozq Tzaebeb For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 100372005, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 465 mm, feed length X-axis: 40,000 mm, feed length Y-axis: 40,000 mm, feed length Z-axis: 40,000 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, mount diameter: 63 mm, total length: 5,350 mm, table length: 500 mm, table width: 450 mm, total width: 5,116 mm, spindle speed (max.): 16,000 rpm, total height: 3,082 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, type of input current: three-phase, table load: 250 kg, position of the milling head: Horizontal / Swiveling, workpiece weight (max.): 250 kg, torque: 63 Nm, rotational speed (max.): 16,000 rpm, overall weight: 16,000 kg, working range: 500 mm, tool weight: 6 g, input voltage: 400 V, input frequency: 50 Hz, input current: 90 A, workpiece length (max.): 700 mm, workpiece width (max.): 400 mm, number of slots in tool magazine: 24, Equipment: documentation/manual, rotational speed infinitely variable, Zero hours HAMUEL HSTM 500 HD 5-Axis Turn-Milling Center Was not used in production / just commissioning (by OEM) and preserved. Comes as complete shipset from MFG. Dwodpfx Alozvulkobeb - X, Y, Z axis with absolute linear scale - A axis - Swivel axis / B axis - C axis - Pressure control of head clamping - CNC-control system SIEMENS 840D SL - Remote diagnosis system via Ethernet - Patrol light - Control cabinet with air-condition - Milling spindle 16’000 rpm, HSK-A63 - Machining hour counter - Tool handling system with double gripper - Chill unit - Hydraulic unit - Machine housing with front door L shape - Standard machine color scheme - Coolant supply unit, low pressure, paper belt filter - Flush Gun - Chip conveyor - Oil Mist exhaust system - Documentation 1-fold in English + CD Machine option package: High pressure cooling through spindle BEMA automatically adjustable nozzles Tool measuring system BLUM Work piece measuring system BLUM Rotoclear window Handweel HT2 VNCK Siemens simulation Available in Bangkok, Thailand Worldwide shipping

Condition: good (used), Year of construction: 2013, TX8i-s / WinFlexIPS Bar diameter up to Ø 32 mm Design allows for conversion between long and short turning Controlled axes: 9 Tool holder WRV on top, X/Y/Z dual drive Counter spindle with WRV on the bottom, separate drive Rear unit with drive Rated voltage 400 V, 3~, N, PE · 50 Hz Connection power 28 kVA, pre-fuse 63 A Recommended supply line: 16 mm² up to 30 m, otherwise 25 mm² Total drive power 46 kW · 73 A Compressed air requirement approx. 300 Nl/min Machine weight 6,850 kg Dimensions L × W × H 3,870 × 1,670 × 2,500 mm Safety standard EN ISO 23125, design type 3 small - Coolant lubrication with cutting oil — internal feed 30 bar, medium pressure 20 bar, high-pressure internal cooling 80–120 bar with its own pump - Coolant treatment system with strip filter (ELBARON) - Mist extraction and fume separator - Fire protection and extinguishing system — prerequisite for unmanned shifts with oil - Workpiece removal with linear unit (part gripper) - Incl. various clamping jaws - Linear measuring system in the X-axes - TRAUB tool monitoring and WinFlexIPS programming - Bar loader FMB turbo 3-36 for bars up to 3,200 mm, with synchronous and displacement device - Chip conveyor, hinged belt - Color: Dust gray RAL 7037 Machine operating time approx. 30,600 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Dwedpfx Alezzahzebjb Errors and prior sale excepted. The machine can be inspected under power with short notice.