High-pressure fume and dust extraction

TEKA

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Gisdpfxsyz Dile Acwjr Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: ready for operation (used), Year of construction: 2017, controller manufacturer: FANUC, controller model: F0i-F, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis DOOSAN DNM 6700 vertical machining center was manufactured in 2017. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this DOOSAN DNM 6700 vertical machining center. Contact us for more information. Additional equipment • Spindle Cooler: Included • Preparation for 4th Axis: Pneumatic Clamping Line • Torque Monitoring: Tool Monitoring Systems Machine Benefits Technical Machine Benefits • Coolant pump medium pressure type 1: 19 bar, 1. 5 kw, 18 l/min • Cyclone filter: 25 um Gedox D Sqtepfx Acwoir • Hinged belt conveyor: ejection left or right side • Oil separator: belt type Extra Information Machine still under power Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2010, type of input current: three-phase, filter area: 50 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, Dust extractor, welding fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-type for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA Godpfjw Aw Nnjx Acwjir Model: Filtercube 2H Year of manufacture: 2010 The filter is cleaned by a microprocessor-controlled compressed air pulse system during operation, ensuring high operational efficiency. Low compressed air requirement thanks to the "Power-Spray" system. The central filter ventilation unit Filtercube, equipped with cartridge filters, offers an ideal solution for nearly all smoke and dust filtration applications. The fan is installed on the clean side, reducing the risk of explosion to a minimum. Applications: - Central extraction system for multiple welding stations - Extraction system for welding robots - Extraction system for thermal cutting tables and grinding stations - Unit for general hall ventilation (push-pull or displacement systems) - Extraction system combined with extraction tables - Extraction system for grinding non-explosive materials Specifications: Fan with soundproof casing, power: 4 kW Airflow: 5,000 m³/h Vacuum: 3,000 Pa Inlet diameter: 315 mm Filtration surface: 50 m² New filter cartridges can be ordered to meet customer requirements. Stock number: 0004

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, overall weight: 500 kg, input voltage: 400 V, total width: 1,000 mm, total length: 1,000 mm, total height: 3,250 mm, volume flow: 3,000 m³/h, noise level: 75 dB, filter area: 100 m², negative pressure: 2,500 Pa, compressed air connection: 5 bar, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, operating temperature: 20 °C, control voltage: 24 V, Equipment: documentation/manual, Year of manufacture: 2019. 5.5 KW / 11.5A - Equipped with Softstarter and Siemens PLC control. - Includes 4x 25m2 NEW filter cartridge mounted in the unit. Gijdeymglxjpfx Acwor - Fitted with compressed air cleaning system, Delta P controlled. - Ex works Soerendonk (NL), loaded on truck free of charge. Tested & operational in our workshop. - Supplied with Softstarter option included. - Including 4x 25m2 NEW filter cartridge, installed in the machine. - With compressed air dust discharge system, Delta P controlled. - Ex works Soerendonk (NL), loaded on truck free of cost. - Sold as is, no warranty. - Tested on site and in our workshop, in proper working condition. - Testing and inspection possible.

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, number of slots in tool magazine: 180, Work piece up to 1530 x 1295 x 3500 Kg Tool size up to 650 mm length and 30 Kg Tool size up to 400 x 250 mm and 30 Kg Extende feed rate up to 15 kN-100% ED Coolant Filtration     BLUM Laser NT 3D Quick ser Gisdpfxox Sqpto Acwjr MPC protection 3D Measuring probe DXF Import   Tool package 180 Tool HSK-100A 2 x Cast iron angle plates 1500 mm   15000 Working hours 1e owner machine  X - Travel: 1600mm Y - Travel: 1100mm Z - Travel: 1400mm B-Axis indexing: 360000° Table Length: 1250mm Table Width: 1000mm Table load: 3000 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: HSK-100ISO/Bt/Mk Power on spindle: 52kW Speeds / ranges: 12000Rpm ATC / revolver: 180 Number of controlled axis:4 Length: 9170mm Width: 6320mm Height: 3969mm Weight: 39500kg

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 500 kg, input voltage: 400 V, total width: 1,000 mm, total length: 1,000 mm, total height: 3,250 mm, volume flow: 3,000 m³/h, noise level: 75 dB, filter area: 100 m², suction capacity: 4,500 m³/h, negative pressure: 2,500 Pa, compressed air connection: 5 bar, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, input current: 16 A, operating temperature: 20 °C, control voltage: 24 V, Equipment: documentation/manual, type plate available, Year of manufacture: 2018. 5.5 KW / 11.5A - Equipped with Softstarter and Siemens PLC control. - PRICE INCLUDES: 4x 25m² NEW filter cartridges mounted in the unit. - Fitted with compressed air cleaning system, Delta P controlled. - Equipped with TEKA DUSTVAC separate discharge system, allowing collection into a 200L drum! - Ex works Soerendonk (NL), loaded on truck free of charge. Gedpfx Acsyzqplewoir Tested and working, can be demonstrated in our workshop. - Supplied with Softstarter option included. - PRICE INCLUDING: 4x 25m² NEW filter cartridges, fitted in the machine. - Fitted with compressed air dust discharge system, Delta P controlled. - Equipped with DUSTVAC dust discharge system, with this system dust can be collected in a 200L drum. - Ex works Soerendonk (NL), loaded on truck at no extra cost. - Sold as-is, with no warranty. - Tested on site and in our workshop, in proper working condition. - Testing and inspection possible.

Condition: used, functionality: fully functional, Year of construction: 2005, Concrete mixer TEKA TZK 2.0 Giodoywn T Tepfx Acwsr Mixing capacity: 2 m³ Ceramic lining inside Not yet dismantled

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. Giedpfxepiarne Acwer including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction Giedpfx Acsl Dw U Djwsr is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main Gisdpsib Dadefx Acwsr areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Year of construction: 2000, condition: excellent (used), Please contact us for more information Gjdpfx Ajk Nn Ilecwoir

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW Giodpfx Acekm Rynewer filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Gsdpfx Ajhp S Trjcwoir Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Travel : 205 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 5 - Number of motorized positions : 3 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.269 x 1.160 [mm] - Machine height : 1.693 [mm] - Machine weight : 1.800 [kg] EQUIPMENT - CNC : Mitsubishi MELDAS - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader : LNS Hydrobar Express 332 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. Gedpfxjuwd Rys Acwsir

Year of construction: 2000, condition: good (used), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Type: PP-DC Number: 201320 Volume flow: 320 m³/h Max. Negative pressure: 22.000 Pa Connection diameter: 50 mm Equipment: mobile, portable Accessories: hose 3.000 mm Connection: 1.2 kW 230 V Gedpfomf Uzxox Acwjir Weight: approx. 40 kg Dimensions: 300 x 300 x 850 mm without hose