Used Hydraulic Cold Press for sale (38,371)

Condition: as good as new (ex-display), Year of construction: 2021, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. Iedsxaabfepfx Afiotn - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: used, machine/vehicle number: 72004250751, table width: 900 mm, table length: 2,000 mm, OMET Press, 250T capacity Table 900x2,000mm Strokes per minute: 30-60 Travel: 18-200mm Itsdpexnzd Refx Afion

Condition: excellent (used), Catalogue number: 7740 TECHNICAL DATA Dimensions of heating plates: 3000x1350mm Number of loads: 1 Shelf heated electrically Clearance: 340mm Number of cylinders: 6 Cylinder diameter: 80mm Total power: 20.7kW Pump motor: 1.1kW Dimensions (L/W/H): 3570x1600x2200mm Itjdpfxjxbggqo Afisn Weight approx.: 3500kg ADVANTAGES – German manufacturing – Shelves heated electrically – Unpainted – Excellent condition – Used press Net price: 48,900 PLN Net price: 11,500 EUR depending on exchange rate 4.25 EUR (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2011, -Special price Machine brakes defective- Pressure: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Stroke: 120 mm Installation height: 295 mm Isdpfxjxnyhbe Afijtn Throat depth: 150 mm Machine weight approx.: 2,600 kg

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain Iedpfxjxfl Axs Afistn SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: new, Year of construction: 2025, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Isdpfx Asi Amnpefietn Location: Ex works - available at short notice -

Condition: new, pressure 80.0 t stroke 250 mm Ijdpfxjw U U Sve Afietn table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Year of construction: 2012, condition: ready for operation (used), This MILLUTENSIL Mil 303 hydraulic press was manufactured in 2012. It features a usable table of 3000 mm by 2000 mm, with a maximum load capacity of 30,000 kg on the upper table and 70,000 kg on the lower table. The press operates with a total power of 31.1 kW and offers adjustable hydraulic pressure up to 240 bar. Consider the opportunity to buy this MILLUTENSIL Mil 303 hydraulic press. Contact us for more information. Application Types Iodpsxnr Dhsfx Afiotn Bending

Condition: ready for operation (used), Hydraulic Press Machine, Used Machine Manufacturer: Hydrauma Type: PYE 100 Overall dimensions: Width: 1250 mm Depth: 1680 mm Height: 2800 mm Max. operating pressure: 100T Table size: 710 × 510 mm Clearance: 710 × 500 mm Stroke length: 500 mm Iedpjxacm Rofx Afiotn Electrical data: 400V

Condition: used, Year of construction: 2000, Press force: 85 t Bending length: 2050 mm Distance between uprights: 1750 mm Control: DELEM Stroke: 215 mm Throat depth: 410 mm Itjdpfxjxnxwns Afien Weight: 7,900 kg Machine dimensions: 2700x2100x2400 mm Accessories: - Two-hand operation - 2 support arms - Side safety doors - Lasersafe Fissler - Wila tool holder - Die shifting - Crowning - Tool cabinet

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm Iedpoxna Uzofx Afiotn max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: excellent (used), Year of construction: 1984 Pressing force: 10 t Itodpfx Aforyn S Aoien Total pressing area: 300 x 300 mm Stroke: 540 mm Dimensions W x D x H: approx. 900 x 500 x 2150 mm

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-preserved hydraulic press brake HATASTAR equipped with: - CYBELEC DNC 70 control - Controlled axes Y1;Y2;X;R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press book - Documentation bending length 4600mm Stands width 4100mm Iodpfx Afofthzkeijtn Press force 1350kN stroke 220mm Rapid traverse 140mm/sec working speed 10mm/sec Retraction speed 100mm/sec Further tech. data see pdf.- document Tech. Data and dimensions: Errors excepted.

Year of construction: 2006, condition: ready for operation (used), General Data Ijdpfx Afsxnd Thjietn Measurements width 2550 mm Measurements depth 5450 mm Measurements height 3150 mm Machine weight 24500 kg Main Drive Pressing force 400 t Stroke 300 mm This ERMAK CNC HAP 4100x400 was manufactured in 2006. It features a CYBELEC DNC 60 control system, a maximum working length of 4100 mm, and a press force of 400 t. The internal distance between columns is 3550 mm, and it includes a laser safety system. Consider the opportunity to buy this ERMAK CNC HAP 4100x400 hydraulic press. Contact us for more information about this machine. Application Types Bending

Condition: like new (used), 2 column hydraulic press Press force: 200 t upper stroke: 500 mm lower stroke: 200 mm overall dimension: 1800x2200x3700 mm Iodpfeghl N Usx Afijtn Power: 10 PS Weight: 8.4 t

Condition: used, Year of construction: 1988, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm control Konventionell throat 270 mm back stop - adjustable 550 mm work height max. 900 mm total power requirement 15,0 kW weight of the machine ca. 8,2 t dimensions 3,2 x 1,3 x 2,47 m - 1 upper tool, - 1 lower tool, pointed - Motorized backgauge Isdpfx Aoxcg E Aefistn - 2 support arms - Additional upper tool, split, deer foot - Additional lower tool 2170mm

Condition: used, functionality: fully functional, throat depth: 130 mm, pressing force: 60 t, overall weight: 925 kg, stroke length: 50 mm, Pressure, tn: 60 Throat/reach: 130 mm. Table size: 250 x 225 mm. Stroke: 50 mm. Motor: 11 kW./15 HP. Country of origin: Denmark. Year: 2000 Size (L x W x H): 800 x 900 x 1600 mm. Weight: 925 kg. Max tool height: 220 mm. Working pressure: 200 bar. Itodpsxphtbofx Afion All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 1964, pressure 10 t throat 235 mm stroke ca. 400 mm stroke speed - idle stroke downwards 4,5 m/min stroke speed - idle stroke upwards 10 m/min dayligth ca. 500/600 mm table-size ca. 450 x 400 mm ram hole 32 mm total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 0,95 x 0,45 x 2,1 m Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! Machine only works in full stroke, the stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Ijdevgnqfjpfx Afistn Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2005, Automatic hydraulic press Automax ES5-3000 with a 3000 kN compression force for testing, in excellent condition. Designed for use with cubes up to 200 mm and cylinders with a diameter up to 160 mm and height up to 320 mm. Itjdpfx Asxpcuyjfien Equipped with an external frame for flexural tests with a capacity of 100 kN. Year of manufacture: 2005.

Year of construction: 2018, condition: ready for operation (used), This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information. Ijdpfx Ajxnd Sdefistn Application Types Bending

Condition: excellent (used), functionality: fully functional, die cushion stroke: 400 mm, table width: 1,900 mm, table length: 3,000 mm, installation height: 1,800 mm, distance between stands: 3,040 mm, pressing force: 1,000 t, die cushion force: 400 t, stroke length: 1,400 mm, ram plate width: 1,900 mm, ram plate length: 3,000 mm, Technical data: FORCES Ram force: 10,000 kN Ram return force: 1,000 kN Ram cushion force: 2,000 kN Drawing cushion force (blank holder): 4,000 kN STROKES Ram stroke: 1,400 mm Ram cushion stroke: 200 mm Ijdpfxjxpctcj Afietn Drawing cushion stroke: 400 mm Die height (table to ram) Stroke upper position: 1,800 mm Stroke lower position: 400 mm Table size: 3,000 x 1,900 mm Ram size: 3,000 x 1,900 mm Clear space between uprights (left/right): approx. 3,040 mm Table height above floor: 450 mm Table plate as sliding plate Sliding direction: front Sliding travel: 3,000 mm Sliding speed: 0.5 - 6 m/min Load capacity: 20 t Table and ram deflection at F=max. 2/3 surface load: 0.125 mm/m Drawing cushion size: 2,450 x 1,550 mm Drawing cushion hole pattern From left to right: 17 rows = 16 spaces at 150 mm each From front to back: 11 rows = 10 spaces at 150 mm each Ram cushion size: 2,450 x 1,550 mm Ram cushion hole pattern From left to right: 17 rows = 16 spaces at 150 mm each From front to back: 11 rows = 10 spaces at 150 mm each Height above floor: approx. 7,700 mm Weight, static: approx. 160,000 kg Installed power, total: approx. 265 kW Drive power (main drives, 2 x 110 kW): 220 kW SPEEDS Ram Rapid down speed: approx. 600 mm/s Working speed max. up to 2,500 kN: approx. 37 mm/s Working speed F max.: approx. 16 mm/s Return speed: approx. 430 mm/s Die spotting speed: approx. ≤ 10 mm/s The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy. The actual technical data and functions of the machine are decisive.

Condition: ready for operation (used), Year of construction: 1992, Available immediately from location: Edelhoff Hydraulic Single Column Press Type HEP 45 Year of manufacture 1992 Itsdpfx Afjxn R E Dsion Machine complies with the latest accident prevention regulations Pressure capacity 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive 7.5 kW Weight 6 tons Price: €5,000 plus VAT, ex location

Condition: used, functionality: fully functional, throat depth: 130 mm, pressing force: 45 t, overall weight: 900 kg, stroke length: 35 mm, Pressure, tn: 45 Throat/reach: 130 mm. Table size: 250 x 225 mm. Stroke: 35 mm. Iedpfx Afjxphrqsistn Motor: 11 kW./15 HP. Country of origin: Denmark. Size (L x W x H): 800 x 900 x 1600 mm. Weight: 900 kg. Max tool height: 220 mm. Working pressure: 200 bar. All our machines are tested and serviced before delivery.

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 15200 kg Main Drive Pressing force 2000 kN General Data Machine weight 15200 kg Main Drive Itjdjxmbztjpfx Afijn Pressing force 2000 kN This LAUFFER DK 200 was manufactured in 2007. A robust hydraulic stamping press with a pressing force of 2000 kN and a retraction force of 243 kN. It features a maximum stroke of 320 mm and operates at a work pressure of 249 bar. Weighing 15,200 kg, consider the opportunity to buy this LAUFFER DK 200 hydraulic stamping press. Contact us for further details regarding this machine. Application Types Stamping

Condition: ready for operation (used), Year of construction: 1965, Immediately available ex site: Hydraulic C-frame press WMW Zeulenroda Type PYE 160 S Year of manufacture: 1965 Completely overhauled in 2006 Press force: 160 t Table: 900 x 620 mm Distance table – ram: 800 mm Ram stroke: 500 mm Ram down (rapid traverse): 200 mm/s Ram up: 125 mm/s Drive: 17.5 kW Weight: 8.5 t Ijdpfxsxn Rx Do Afistn Price: EUR 4,000—plus VAT, ex site