HYDRAULIC PRESS

EXNER

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm Itjdpfx Aoyx Imvjbxjg side window 155 mm ram surface 150 mm speed down 480 mm/s speed up 480 mm/s working speed 20 mm/s oil volume 115 l power requirement 7,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation

Condition: new, New hydraulic high speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Itodpfef Rt Irsx Abxjg

Condition: used, Year of construction: 2000, pressure 25 t stroke 150 mm throat 420 mm dayligth 450 mm table surface area 700 x 820 mm Ijdpfxsvut N Ne Abxotg table height over floor 850 mm ram surface 600 x 600 mm feed down 370 mm/s feed up 370 mm/s working feed 18 - 33 mm/s oil volume 300 l power requirement 5,5 kW Weight 5,8 t dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation

Year of construction: 1967, condition: ready for operation (used), A four-column stamping press Exner with electronics overhauled in 2011 is available. Press force: 340t, pressure cylinder: 1, pressure cylinder diameter: 380mm, ram stroke: 180mm, stroke adjustment: 100mm, installation height: 400mm, ram diameter: 260mm, table dimensions X/Y: 910mm/610mm, machine dimensions X/Y/Z: approx. 1300mm/1600mm/2950mm, weight: approx. 6500kg. An on-site inspection is possible. Iodsy Hvqfjpfx Abxjtg

Condition: good (used), Industrial robots Manufacturer: Kuka Model: KR6, KR6-2, KR6arc Model: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F Iodpfstuc U Rsx Abxotg All models equipped with KRC2ed05 control system Kuka KR6 KRC2ed05 Year of manufacture 2006 Kuka KR6-2 KRC2ed05 Year of manufacture 2011 Kuka KR6arc KRC2ed05 Year of manufacture 2006-2007 = several units in stock Kuka KR16L6 KRC2ed05 Year of manufacture 2009 Kuka KR16L6-2 KRC2ed05 Year of manufacture 2011 Kuka KR16 KRC2ed05 Year of manufacture 2007-2009 = several units in stock Kuka KR16-2 KRC2ed05 Year of manufacture 2010-2012 = several units in stock Kuka KR16-2 Speed KRC2ed05 Year of manufacture 2012 = several units in stock Kuka KR16-2 Foundry KRC2ed05 Year of manufacture 2012

Condition: excellent (used), Year of construction: 2002, EXNER Press EXSBZRD 500/100 Press force: 5,000 kN Tool dimensions: 1,800 x 1,200 mm Max. stroke length: 600 mm Working speed: 16/30 mm/s Rapid traverse speed: 400 mm/s Isdpfx Asy Erlpsbxetg Including feed and transfer unit

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s Itodsyz Dtdepfx Abxjg - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Year of construction: 2006, condition: refurbished (used), HYDRAULIC PRESS MECAMAQ PRESSURE 350t STROKE 350mm TABLE LEFT RIGHT 600mm TABLE FRONT BACK 750mm POWER 15kw Dimensions: Height: 2,9m Width: 1,9m Length: 1,3m Isdpjfmqqlefx Abxetg Weight: 5.700 kgr

Condition: used, Year of construction: 1989, machine/vehicle number: 10131, functionality: fully functional, Manufacturer: Maschinenfabrik Exner GmbH & Co. KG Model: EEX 300 SB-ZR Machine No.: 10131 Year of manufacture: 1989 Press force: 3,000 kN (300 t) Drive power: 80 kW Overrun distance: 36 mm Itjdpfx Ajwr Um Asbxjg Overrun time: 103 ms Hydraulic oil capacity: approx. 2,400 liters Total weight: approx. 47 tons Condition: inspected, videos can be provided upon request. Location: 59227, Ahlen Disassembly and transport to be arranged by the buyer.

Condition: used, Year of construction: 1987, machine/vehicle number: 10064, functionality: fully functional, operating hours: 90,041 h, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 300 mm, table width: 800 mm, table length: 1,290 mm, table height: 1,000 mm, ram plate width: 800 mm, ram plate length: 1,300 mm, oil tank capacity: 1,300 l, total length: 2,330 mm, total width: 1,600 mm, total height: 4,150 mm, overall weight: 21,000 kg, control cabinet height: 2,070 mm, control cabinet length: 1,500 mm, control cabinet width: 400 mm, DGUV certified until: 06/2026, die cushion stroke: 70 mm, distance between side stands: 420 mm, installation height: 600 mm, Equipment: safety light barrier, 1x tool safety input Two-hand control panel with emergency stop 8x hydraulic clamps Electrically adjustable depth stop Iedpfxoyvgrho Abxotg Cut stroke damping Ejector - draw cushion for ram and press table Electronic stroke and pressure measurement system Hydraulic main drive pump completely overhauled with a new drive motor

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm Iodpfod Ha Irjx Abxotg strip thickness: 0,5 - 3 mm blade shaft Ø: 180 mm

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 160 t, stroke length: 300 mm, table width: 1,250 mm, table length: 800 mm, installation height: 500 mm, EXNER EX SL 160 double column press Isdpfouw S A Dsx Abxstg NEW Machine is under construction Pressing force 1600 kN Installation height: 500 mm stroke: 300 mm Table width: 1250 mm Table depth: 800 mm mech. depth stop

Condition: used, Year of construction: 1970, pressure 40 t stroke 150 mm serial number 100091 Ijdpjvxltbjfx Abxetg 2 Druck & Hub verstellbar pressure 25 t weight je 1,5 t safety light frame ja bei beiden

Condition: new, Year of construction: 2026, 0554 mm 370 mm Iodewyd Tnepfx Abxstg 2000 mm 280 mm 104 mm 11 kW

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, throat depth: 230 mm, installation height: 400 mm, NEW EXNER C-frame press EEX SLL 40 Standard Line LIGHT Year of manufacture: 2025 Isdpfjw Nx Nhsx Abxotg Pressing force: 400 kN Installation height: 400/450 mm Stroke: 250 mm Table (width): 700 mm Table (depth): 450 mm Throat depth: 230 mm