Used High Speed Machining Center for sale (89,122)

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Gsdpfx Ajy Hp Rrjk Uekb Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: used, functionality: fully functional, ROSILIO MILLING MACHINE Type: C640 – Vertical machining center Gedpezb Dcqofx Ak Uekb Travels (mm): X: 640 • Y: 400 • Z: 400 Table: 800 × 400 mm Maximum table load: Approximately 300–400 kg Spindle speed: Up to 8,000–10,000 rpm (5.5–7.5 kW motor) Rapid traverse rates: 20–24 m/min Numerical control: Siemens Total weight: Approximately 2.8–3.2 tons Approximate specifications

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 231458, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 370 mm, spindle speed (max.): 6,000 rpm, table load: 800 kg, Note: The auction end date has been postponed to September 16, 2026! TECHNICAL DETAILS Travel range, X-axis: 3,700 mm Travel range, Y-axis: 2,100 mm Travel range, Z-axis: 370 mm Rotation range, C-axis: 0–362° Swivel range, A-axis: 0–90° Travel time, C-axis (0–392°): 3 s Travel time, A-axis (0–90°): 2 s Gedezuyryepfx Ak Uokb Spindle speed, electric spindle: 6,000 rpm Power, electric spindle: 16.5/56 kW Speed, X-axis: 30 m/min Speed, Y-axis: 30 m/min Speed, Z-axis: 5 m/min Dimensions, tilting table: 3,500 × 2,000 + 500 mm Load capacity: 800 kg MACHINE DETAILS Stainless steel cover for saw blade with opening for cutter: Ø 425 mm Stainless steel cover for saw blade: Ø 625 mm Total power consumption: 23 kW Water consumption for saw blade: 30 L/min Total weight: 4,800 kg EQUIPMENT Material and saw blade measuring system Vacuum system for moving the panels Camera with software for management Pneumatic tilting table Motorized rotary head (C-axis) Motorized saw blade tilt (A-axis) Stainless steel cover for saw blade with opening for cutter Stainless steel cover for saw blade

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Gjdpfx Akoyr Dawj Uokb Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, empty load weight: 13,000 kg, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 1,100 mm Travel range, Z-axis: 500 mm Godjzxckmspfx Ak Ujkb C-axis rotation: 360° Tool magazine slots: 32 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Dry weight: 13,000 kg Transport packages: 3 pcs. EQUIPMENT Documentation CE marking

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Gedpfed I R E Nsx Ak Ujkb Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 183-89, CNC Vertical Machining Center Make: CHIRON Group Model: CHIRON FZ 12 W Year of manufacture: 1999 Machine No.: 183-89 Typical technical specifications of the CHIRON FZ 12 W: Machine type: Control system: usually Siemens 840D or Heidenhain X-axis travel: approx. 550 mm Y-axis travel: approx. 300 mm Z-axis travel: approx. 425 mm Table size: approx. 660 × 350 mm Gkjdey Sr Ikjpfx Ak Ujb Table load capacity: approx. 500 kg Spindle speed: depending on version, 10,000 – 20,000 rpm Tool holder: SK40 or HSK-A63 Tool changer: 12–24 positions Rapid traverse: up to 60 m/min Main spindle power: approx. 10–15 kW Coolant system Central lubrication Fully enclosed safety cabin Machine weight: approx. 4,500–5,500 kg The machine is part of CHIRON's well-known FZ series and is especially suited for high-speed aluminum and steel machining.

Condition: used, Year of construction: 1978, 40 1008 rated current 20 A voltage 24 V weight of the machine ca. 3,5 t Gkedpfxswg Huns Ak Uob

Condition: used, Henninger high-speed milling spindle SK40 Type 801 M391 For Deckel milling machines Gsdpfx Ajvygxnjk Uskb Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm With 14 collets Clamping range 2 - 15 mm

Condition: used, Year of construction: 2018, functionality: fully functional, Standard configuration: Control and operation: • Control system: HEIDENHAIN TNC 640 - Handwheel: HEIDENHAIN HR510 - Swiveling control panel with two 19" monitors - 3 potentiometers (feed rate, rapid traverse, speed) - 3-color status indicator light - HEIDENHAIN DCM; collision monitoring between the machine and the tool Standard configuration: Machine: - Travel range, X-axis = 1,000 mm - Travel range, Y-axis = 1,100 mm Gkjdpozzp Tajfx Ak Uob - Travel range, Z-axis = 810 mm - NC rotary table 1,000 x 800 mm with T-slots 18H7 / 100 mm, driven by a pre-loaded worm gear drive - Swivel range 1,350 mm - Direct measuring systems on all axes, manufactured by HEIDENHAIN, connected to the pneumatic system - Micro-Epsilon "Spindle Growth System" for detecting and dynamically compensating for thermally induced spindle growth - Full enclosure with a large angled door for crane loading and a quick-access door - View windows in the working area made of laminated safety glass - Coolant nozzle - Oil collection pan made of chrome steel sheet - Leveling elements - Machine paint: Blue and light gray Milling head: - Automatic horizontal/vertical swiveling milling head as a full-fledged, stepless NC axis from -1° to +90° - Speed: 16,000 min-1 - Main drive: 38 kW (100% duty cycle) - Torque: 105 / 135 / 155 Nm (100% / 40% / 25% duty cycle) - Tool holder: HSK 63-A Coolant supply: - Internal coolant supply: 30 bar, Form A, paper band filter and high-performance filter with integrated chip extraction system - Milling head external cooling via nozzle ring Tool changer: - Rack magazine with 85 positions - 5-position tool loading station - Dialog-based operating panel Chip removal: - Scraper conveyor for chip removal at the front along the machine bed, chip discharge height 1,100 mm Documentation: - Acceptance test report for circularity test, laser inspection - Technical documentation in duplicate - CE declaration of conformity Milling head: Compressed air through the spindle center The compressed air can be selected via an M-function. Internal coolant supply with paper band filter: - Internal coolant supply with 80 bar (Form A) with 20 l/min, incl. paper band filter, coolant nozzle, and additional fine filter, particle size minimal 40 µm. Pressure regulation for each tool via tool table or a switch on the control panel during operation. Measuring probe and tool measurement: - Radio measuring probe BLUM TC60 incl. software adaptation, fully set up, incl. KinematicsOpt and calibration sphere on magnetic stand - TRS2 tool breakage detection system non-contact. Only suitable for tools with a solid core from 2 mm, e.g. drills, tapping drills. Additional machine options: - Oil and emulsion mist extraction Mechanical air filter 1,800 m3/h suction capacity - DXF converter - HEIDENHAIN AFC "Adaptive Feed Control" adaptive feed rate control - HEIDENHAIN ACC "Active Chatter Control" active chatter suppression

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 4480, total length: 14,500 mm, total width: 7,800 mm, total height: 3,500 mm, overall weight: 20,000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA Equipment: 5-Axis Unit with Cardanically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Gksdpfx Asywzq Ssk Ueb Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 3-Axis Unit with Vertically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 8-Spindle Drilling Unit (1 unit): L-Shape, Grotefeld Drill spindles: individually selectable Rotation direction: clockwise/counterclockwise Pitch: 32 mm Power: 2.5 kW Speed: 5,000 rpm fixed Z-axis stroke: +75 mm Holder: D = 10 mm H7 Plunge stroke: 80 mm Grooving Unit (5 units): GROTEFELD Angle Saw Unit F100-S The working/milling stroke is pneumatic. Drive: three-phase motor with multi-ribbed belt LEFT version Drive rotation direction: clockwise/counterclockwise Speed reduction: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm, n2 = 8,011 rpm at 50 Hz Spindle power: 2.2 kW Feed: 150 mm Tool holder: Ø30 x 1.5 mm – 5.0 mm Tool holder rotation: opposite to drive rotation direction Feed force: 2565 N Underfloor Drilling Unit in Machine Bed (1 unit): GROTEFELD Angle Milling Head G06-1.1-P The working/drilling stroke is pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation direction: clockwise Speed reduction: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) For ER25 collet DIN 6499-B Ø0.5–16 mm max. Tool holder rotation direction: clockwise Flange clamping piece: FK45 Feed slide: with pneumatic cylinder and double steel guideways Feed: 80 mm

Condition: reconditioned (used), functionality: fully functional, The used MIND DART DL4 rapid-feed milling machine is particularly suitable for tooling work, thanks to its tilting head and the ability to use a quill (including with automatic feed) with automatic lubrication of the guides. Gedeznvmyjpfx Ak Uekb Equipped with independent automatic feeds, it also includes a dividing head with tailstock and related gears, dividing set, and some tools. The machine has been refurbished to meet standards and is in perfect working order.

Condition: used, Year of construction: 2011, operating hours: 20,155 h, functionality: fully functional, machine/vehicle number: E807024, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 30,000 rpm, spindle speed (min.): 3,000 rpm, table width: 600 mm, table length: 850 mm, total height: 2,750 mm, total width: 2,870 mm, total length: 3,390 mm, type of input current: three-phase, workpiece weight (max.): 800 kg, overall weight: 7,500 kg, distance table to spindle center: 560 mm, input current: 63 A, For sale: a professional, high-speed machining center of the HSC (High Speed Cutting) class. The machine's main advantage is its exceptionally efficient spindle, reaching up to 30,000 rpm, mounted on a precise HSK-50E taper. Combined with a rigid and heavy construction (weight approximately 7,500 kg), the machine guarantees perfect surface quality, rapid milling speeds, and the ability to operate stably with micro-tools. An ideal choice for the precise machining of molds, dies, aluminum parts, light metals, and plastics. Technical specifications: Spindle and drive (main HSC advantage): • Spindle speed: 3,000 to 30,000 rpm (High Speed Cutting) • Spindle taper: HSK-50E (ensures excellent balance and safety at high speeds) • Spindle motor power: 15 kW Dimensions and working area: • Table dimensions: 850 x 600 mm • Maximum, uniform table load: 800 kg • Dimensions of T-slots: 16 mm x 5 pcs. • Footprint (overall dimensions): 3390 x 2870 x 2750 mm Travel ranges (axes): • X-axis travel: 800 mm • Y-axis travel: 600 mm • Z-axis travel: 400 mm • Distance from spindle to table surface: 160 – 560 mm Dynamics and accuracy: • Positioning accuracy: ±0.005 mm • Positioning repeatability: ±0.0015 mm • Maximum working feed rate: 20 m/min • Maximum rapid feed rate: 30 m/min Gedpszuzp Hofx Ak Uekb Tool magazine and media: • Tool magazine capacity: 16 tools • Maximum tool diameter: Ø20 mm • Dielectric fluid tank capacity: approx. 200 liters Power supply and installation: • Power requirement: 45 kW • Preferred fuse rating: 63 Amp (time-delay “C”)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1160235, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg   MACHINE EQUIPPED WITH: - Haas CNC Control Gkedpfx Akozz Ndre Uob Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: refurbished (used), functionality: fully functional, table length: 1,200 mm, table width: 500 mm, spindle mount: MK 3, height adjustment type: electric, Donau DR23 Radial Drilling Machine – Robust Quality Machine For sale is a reliable Donau DR23 radial drilling machine, ideal for workshops, metalworking, or industrial applications. The machine impresses with its sturdy design, high precision, and versatile applications for drilling, countersinking, and thread cutting. Details: Manufacturer: Donau Gedpfx Aoyrtkxek Ujkb Model: DR23 Radial drilling machine overhauled by Vaumtec Quick-change chuck Stable cast construction Adjustable arm for flexible machining of large workpieces Suitable for steel, aluminum, and other metals Forward and reverse rotation

Condition: like new (used), Year of construction: 2016, operating hours: 1,900 h, functionality: fully functional, number of slots in tool magazine: 21, Equipment: chip conveyor, Fanuc vertical machining center Model: Robodrill α-D21LiB5 Year: 2016 Table size: 850 x 410 mm X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Tool magazine capacity: 21 Control unit: Fanuc 31i model b5 Spindle speed (main spindle): 100-10000 rpm Spindle taper: BBT30 Spindle power: 11 kW High-pressure coolant system through the spindle: 15 bar Chip conveyor (belt type) Air blow through the spindle for dry machining 4-axis continuous table Gkodszz R Ekepfx Ak Ueb Maximum workpiece weight (spindle): 300 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 1116-147-739, Offer 26155 Technical data: - Electric hydraulic lifting and lowering of the saw bow - Saw blade dimensions: 400 x 30 x 1.5 mm - Cutting range at 90°: - Round: approx. 210 mm - Flat: approx. 240 x 190 mm - Square: approx. 210 x 210 mm - Cutting range at 45°: - Round: approx. 150 mm - Flat: approx. 150 x 100 mm Gkodpfx Akezf A Dye Usb - Flat: approx. 130 x 210 mm - Square: approx. 145 x 145 mm - Adjustable stroke speeds and cutting speeds - Stroke rates: 62 / 125 m/min - Average cutting speed: 16 / 32 m/min - Miter adjustable vise with opening width up to 260 mm - Electric coolant system - Drive: 400 V / 1.1 kW - Space requirement: approx. W 500 x H 1250 x D 1200 mm - Weight: approx. 180 kg

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MK 4) • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting attachment • Two 18 mm T-slots each on rear and left of machine base • 3-axis digital readout • Machine lamp • Central lubrication • Table top machined all around Gksdpox Uwpxsfx Ak Ueb • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose - table top min 40 mm, max 710 mm Distance spindle nose - base plate min 840 mm, max 1510 mm Drilling radius min 540 mm, max 1590 mm Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Tapping St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2,800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic system diagram Electrical wiring diagram

Condition: good (used), 1 used quick-change radial drilling machine Manufacturer: Donau Type: DR 28 Z Year of manufacture: 1985 Technical data: - Drilling capacity in full steel ST 60: 28 mm Godpfx Akozl Ufce Uokb - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in steel ST 60: M 30 - Thread cutting in cast iron GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 drill spindle speeds: 45 - 2240 rpm - 4 drilling feed rates: 0.1 - 0.45 mm - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - Including: - Thread cutting device - Hydraulic column and boom clamping - Coolant system - T-slots, vertical, on the left side of the machine

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Gjdjyhdvkopfx Ak Uskb Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: AB00019454, functionality: fully functional, input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 2,500 kg, Equipment: CE marking, documentation/manual, For sale, a fully functional CNC drilling machine, model SCM Morbidelli CX210, with high axis travel speeds, a very large drilling head, and a drilling head for Blum fitting spacing, as well as a saw for creating grooves. Very fast drilling, without an electro-spindle. Specifications: Min./Max. element length mm 200/3,050 Min./Max. element width mm 50/1,300 Min./Max. element thickness mm 8/95 Max. element weight kg 70 Max. feed rate in X-Y-Z axes m/min 70-40-30 DRILLING HEAD F31LTC Vertical spindles pcs. 21 Horizontal spindles in X axis pcs. 6 Horizontal spindles in X axis pcs. 4 Spindle speed rpm 4,500 Fixed saw in X axis, diameter mm, rpm 125 5500 Max. saw thickness mm 6 Motor power kW 2.2 ADDITIONAL OPTIONS Inverter for the drilling head to adjust the drilling head speed in the range of 3000-8000 rpm Drilling head for fittings with 45/9.5 spacing "eye-M PRO" console integrated with PC Device allowing CNC operation via provided programs. Supplied with: - system for monitoring machine status via an LED light bar Gedpszz Syvefx Ak Uskb - industrial PC: Fanless design, IP 53 protection - Intel I7 processor – 2.80/3.80 GHz - 8 GB RAM – DDR4 - 256 GB SSD hard drive - Windows 10 IOT – 64 bit program - QWERTY keyboard, English version - 3-function wired mouse - Ethernet RJ45 port - USB port: 1 available - nominal operating temperature +5°C / +35°C - color LCD monitor, 21 inches, full HD, 16/9 format, LED backlight, multi-touch system, 10-point Remote control Additional USB hardware key for the Maestro CNC program.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 6,000 rpm, machine/vehicle number: 1300030760, TECHNICAL DETAILS Travel range, X-axis: 4,200 mm Travel range, Y-axis: 485 mm Travel range, Z-axis: 340 mm Max. speed, X-axis: approx. 60 m/min Max. speed, Y-axis: 30–60 m/min Max. speed, Z-axis: 30–60 m/min Gksdpfx Akezxngme Usb Max. spindle speed: 6,000 rpm Spindle power: 5.5 kW Tool changer: 8-position turret MACHINE DETAILS Compressed air supply: 7 bar Air consumption: approx. 100 l/min with spray device Power supply: 400 V, 3~, 50 Hz

Condition: used, Year of construction: 2015, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm control: Mitsubishi M70 table-size: 2 × 700 × 400 mm mm table load capacity: 2 × 250 kg kg tool taper: SK40 / ISO40 Godpjzzyg Djfx Ak Uskb Revolution per minute: 12.000 U/min. tool changer with: 24 Plätze (+1 Werkzeugwechselposition) total power requirement: 25 kW Weight approx.: 6,6 t dimension machine approx.LxWxH: 3,7 × 2,60 × 2,78 m The Müga S6040 is a modern vertical CNC machining center designed for the precise complete machining of workpieces in single-part, small-batch, and series production. The machine is equipped with a high-performance main spindle with speeds of up to 12,000 rpm, a Mitsubishi M70 CNC control system, and an integrated twin pallet changer (worktable changer) for highly efficient and productive machining. Its rigid machine structure and precision linear guideways make the Müga S6040 ideally suited for demanding milling, drilling, tapping, and machining operations in toolmaking, mechanical engineering, mold making, and general metalworking. 4-axis CNC machining center with pallet changing system – 2 workstations (A/B), each equipped with its own CNC-controlled 4th axis and chuck. *

Condition: used, Mori Seiki MV45/45 machining center with Kitagawa 4th axis and 820 × 555 × 550 mm travels, equipped with a professional through-spindle coolant retrofit by Deuschle Spindelservice—rotary union through the pull stud, hydraulic tool clamping with pressure intensifier, and a dedicated 15 bar pump switched directly via M50. The entire TSC system is integrated inside the machine with no external unit. CNC CONTROL Controller: Fanuc 11M AXES X-axis travel mm: 820 Y-axis travel mm: 555 Z-axis travel mm: 550 4th axis / rotary table: Kitagawa SPINDLE Max. spindle speed rpm: 4.500 Spindle power kW (S1/S6): 7,5 / 5,5 Spindle torque Nm: 200 Spindle taper / interface: BT 45 COOLING Coolant through spindle bar: 15 • Through-spindle coolant (IKZ) retrofitted by Deuschle: rotary union through the pull stud, hydraulic clamping/release with pressure intensifier, own 15 bar pump switched via M50 • Approx. 75 BT 45 tool holders included, all with through-coolant passage, plus about 20 pull studs Gkodpfxozy Svuj Ak Usb • 4th axis (rotary table)

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Godszgvmqjpfx Ak Uskb Condition: Very good, used but like new Available immediately from stock.