Used Heavy Duthy Lathe for sale (9,415)

Condition: like new (used), Year of construction: 2006, travel distance X-axis: 177 mm, travel distance Y-axis: 41 mm, travel distance Z-axis: 550 mm, spindle motor power: 15 W, rotational speed (min.): 5,000 rpm, total height: 2,065 mm, total length: 4,390 mm, total width: 1,741 mm, overall weight: 5,000 kg, CNC controller: Nakamura-Tome FANUC Capacity X-axis travel mm: 177,5 Y-axis travel mm: ± 41 Z-axis travel mm: 550 B-axis travel mm: 689 C-axis: 360º (0,001º) Turning length mm: 500 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 780 Codpfxox Dbxgs Ab Toaa Bar work capacity mm: 51 Upper turret Tool holder: VDI-30 Number of tool slots St .: 12 Speed driven tools RPM: 3.600 Drive power driven tools kW: 5.5 / 3.7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Maximun torque Nm: 47,2 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11 Equipment Chip conveyor Part catcher Bar Loader RBK 10016 Milling function Working time hours Potencial nominal kVA: 31,43 Basic machine dimensions / weight Length mm: 4.390 Width mm: 1.741 Height mm: 2.065 Weight kg: 5.000

Condition: excellent (used), Year of construction: 2011, FANUC 32i A CNC control Spindle hours: 8,541h Technical details Swing over carriage: 800 mm Turning length: 3,200 mm Swing over bed: 1,030 mm Standard turning diameter: 750 mm Spindle bore: 181 mm Bar capacity: 164 mm X-axis travel: 471 mm Z-axis travel: 3,235 mm Rapid traverse (longitudinal/transverse): 15 / 20 m/min Spindle speed: 3,000 rpm Spindle motor: 45 kW Turret: 12 / 6 BMT 85 Driven tool motor: 7.5 / 5.7 kW Driven tool speed: 3,000 rpm Total power requirement: 62.2 kVA Machine weight: approx. 22 t Dimensions: 7,357 x 2,710 x 2,590 mm Accessories: 12-position turret with driven tools Hydraulic tailstock Cjdpfx Abewqpn Eo Tsaa Sandvik Capto C6 tool holders – 4 pcs Hydraulic chuck Ø630 mm SMW Autoblock Hydraulic steady rest (min. 110 mm, max. 530 mm) Video available

Condition: good (used), Year of construction: 1979, Single column vertical turning lathe BERTHIEZ TM500 SP, as follows: Manufacturer: Berthiez (France) Model: TM500 SP Year of manufacture: 1979 Main technical data: Table diameter: 6300 mm Maximum turning diameter: 15000 mm Maximum usable height: 4000 mm Arm travel: 3600 mm Main motor power: 100 kW Maximum allowable load on faceplate: 80 t Ram size: 360x360 mm Machine weight approx. 230 tons The machine can perform both turning and milling operations. Casdpfjx A U Raox Ab Tea Do not hesitate to contact us for any additional information.

Condition: excellent (used), Balestrini SM Single-Sided Oscillating Drilling Machine One drilling unit Oscillation range up to 120 mm Max tool diameter 12 mm Caedex Dag Njpfx Ab Tea Manual table height adjustment up/down Table angle adjustment +/-15° Main motor power 2.2 kW Oscillation motor 0.75 kW

Condition: used, Year of construction: 2007, Doosan Puma 280LM Year 2007 Fanuc OiTC with Manual Guide C-axis with driven tools Turning length 1030 mm Turning diameter 420 mm Z-axis 1100 mm Spindle bore 76 mm Mounted SMW autoblock 315 mm chuck with 91 mm bore BMT 55 turret Codex A Tzdjpfx Ab Toaa Tailstock Tool probe Chip conveyor Documentation Very good condition

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Caedsw Sfptjpfx Ab Tsa

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Csdpfxox A R U Ie Ab Tsaa Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.

Condition: used, Support grinder for lathe FEIN Type: MB 2101 Ident No.: 2287997 Grinding wheel diameter: max. 150 mm Grinding wheel width: max. 20 mm Mounting taper: Ø15.5 - Ø13 mm, length 21 mm Csdpfxsx A Imhs Ab Tsaa Motor speed: 4400 rpm Motor power: 550 Watt Electrical connection: 380 Volt, 50 Hz - Grinding spindle drive via flat belt - 1 pc. grinding wheel mount Ø 32 mm - 1 pc. universal grinding wheel Ø 146 x 20 mm Support grinder weight: 19 kg In good condition

Condition: used, Year of construction: 1997, swing diameter over bed slide 780 mm turning length x mm Csdeudc Uhepfx Ab Toaa 4000 total power requirement x kW weight of the machine ca. x t

Condition: excellent (used), With C-axis With driven tools Cajdpjx A E H Sefx Ab Tea Swing over bed 400 mm Distance between centers 1000 mm Spindle speeds 1-3'000 rpm Control: SIEMENS 840D sl ShopTurn Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2003, functionality: fully functional, Machine-Details : Stock-No. 1022-2405 Type of machine Turning Automatic Lathe - swiss lathe Make CITIZEN Type L32 VII Year of manufacture 2003/2005 Type of control CNC Storage location Monheim (Germany) Country of origin Japan Delivery time Immediately Freight basis Ex warehouse, loaded on truck Cjdpfx Absx A A R Ij Teaa Technical details : working diameter max. 32 mm spindle passage 36 mm turning length 320 mm Control MITSUBISHI MELDAS 635LC travel max. (X1) 108 mm travel max. (Y1) 275 mm travel max. (Z1) 325 mm travel max. (X3) 238 mm travel max. (Z3) 410 mm main spindle speeds: 200 - 8000 U/min c-axis 0,001° deg. Subspindle spindle speeds 200 - 7000 U/min c-axis 0,001° deg. rapid traverse 20 m/min main drive 3,7 / 5,5 kW Subspindle motor 1,5 / 2,2 kW dimensions of machine 2,77 x 1,24 x 1,79 m weight of the machine ca. 2850 kg Additional information : CNC Swiss-Type Lathe First put into operation December 2005 The machine was used for a single shift and is in good condition with no maintenance backlog. Equipment: FMB Turbo 5-42/3200C bar loader, built 2004 High-pressure pump Many collet chucks for main spindle Various collets Drive unit for synchronously driven guide bush Synchronously driven guide bush Drive unit for transversely driven spindle on linear support Pick-up spindle Collet chuck for pick-up spindle Blow-out device for pick-up spindle Five fixed tool holders on the rear Workpiece removal device Coolant tank Central lubrication system Door lock Ejection device for workpieces with through holes Machine documentation The machine will be sold without tools and extraction system.

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Codpfov Iplasx Ab Tjaa Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Codpfx Asx A R Sgjb Tjaa Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: used, FEIN Support Grinder Serial No.: G 95304 Model MB 406 Max. grinding wheel diameter: 100 mm Max. grinding wheel width: 20 mm Grinding wheel mounting: Ø 20 mm Motor speed: 6,800 rpm Motor power: 350 Watts Caodpfxex A Imbe Ab Tsa Mains connection: 220 Volt, 50 Hz - Grinding spindle driven by flat belt - 1 universal grinding wheel Ø 98 x 20 mm included Weight: 11 kg Good condition

Condition: used, Year of construction: 1999, control Heidenhain centre distance 1400 mm weight of the machine ca. 3,6 t Cedpfx Abow Syd Sj Toaa Handwheel defective

Condition: excellent (used), Year of construction: 2010, Swing over bed 710 mm Center height 350 mm Distance between centers 3000 mm C-axis +/- 0.05° Spindle speeds 2-1850 rpm Control: SIEMENS 840D Shop Turn Chip conveyor Caedpfx Asx A Exbob Tja Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1979, Center height: 120 mm Center width: 450 mm spindle opening/boring: 23 mm board width: 100 mm Speeds: (12) 180 - 2240 min-1 travel top slide: 140 mm tailstock mount: MK 2 quill stroke: 80 mm motor power: 2,5 kW Codpoip Nczofx Ab Toaa connection: 400 V dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Punching device quick change holder system Multifix, size Aa Machine light Coolant device

Condition: used, Year of construction: 2001, functionality: fully functional, Control: GE FANUC Series 18i-T Travel range X-axis: 570 mm Working stroke X-axis: 250 mm Travel range Z-axis: 200 mm Swivel diameter: 260 mm Max. turning diameter: 220 mm Max. workpiece length: 100 mm FORCARDT 3QLC 250-72 Z8 S12 power chuck Max. spindle speed: 4,500 rpm Main drive power, 100/40% duty cycle: 15/22 kW Torque 100/40% duty cycle: 202/303 Nm Rapid traverse speed in X: 60 m/min Rapid traverse speed in Z: 30 m/min Standard automation with 12 - 18 pallets Tool carrier with driven tools, 12 stations Max. speed of driven tools: 6,000 rpm Includes various driven tools and chip conveyor Dimensions without chip conveyor (LxWxH), approx.: 2,720 x 1,500 x 2,400 mm Caedsx A Ac Dspfx Ab Tsa Weight approx.: 6,500 kg

Condition: used, Year of construction: 2009, controller manufacturer: Siemens, controller model: Siemens 840 D, _____ Description: Year of manuf. : 2009 Control : Siemens Siemens 840 D Turning length : 2140 mm In General: Year of construction:2009 Control system:Siemens 840 D Rotation diameter:2,800 mm Rotation height:2,140 mm Spindle / Table: Technology:Geared spindle Speed:280 rpm Power:80 kW Caodpfxsx Axyxs Ab Toa Torque:44,900 Nm Faceplate:2,220 mm Max. table load:17,000 kg Tool carrier: Cross beam travel:1,200 mm Chisel slide travel:1,750 mm Maximum plunge diameter:380 mm Cross-section of chisel slide:300 x 250 mm Milling unit:2,000 rpm, 1,395 Nm Tool holder:SK 50 Equipment: Tool magazine:72 stations Chip disposal:Chip conveyor Coolant supply:IKZ system Tool holders:Various tool holders

Condition: good (used), Year of construction: 1999, Machine is in very good working condition. Cjdpex Awnuofx Ab Toaa

Condition: used, Year of construction: 1998, turning length 3500 mm swing diameter 1000 mm centre height 500 mm turning diameter over slide 600 mm weight of the machine ca. ca. 8,5 t including 2 lynettes and 900mm faceplate Csdpfxev Hhv Ij Ab Tsaa

Condition: excellent (used), Swing over bed 360 mm Distance between centers 650 mm Spindle speeds 20-3250 rpm Codpfx Abjrx Rwns Teaa Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2009, faceplate diameter 1250 mm turning height 1250 mm Control 0i-TD Fanuc max. torque at faceplate 12500 Nm max. turning diameter 1600 mm max. workpiece weight 5000 kg table speed 2- 300 min/-1 x-axis 1475 mm z-axis 900 mm rapid traverse 10 m/min spindle cone ISO BT50 tool capacity 12 pos. Cjdpfowlvifex Ab Tsaa total power requirement 75 kW weight of the machine ca. 32 t dimensions of the machine ca. 4,7 x 5,8 x 5,5 m CNC vertical lathe with 12 positions ATC. Spindle reception is BT 50. Control: Fanuc 0i-TD

Condition: used, Year of construction: 2001, functionality: fully functional, Control: GE FANUC Series 18i-T Travel range X-axis: 570 mm Working stroke X-axis: 250 mm Travel range Z-axis: 200 mm Swivel diameter: 260 mm Max. turning diameter: 220 mm Max. workpiece length: 100 mm FORCARDT 3QLC 250-72 Z8 S12 power chuck Max. spindle speed: 4,500 rpm Main drive power, 100/40% duty cycle: 15/22 kW Torque 100/40% duty cycle: 202/303 Nm Rapid traverse speed in X: 60 m/min Rapid traverse speed in Z: 30 m/min Standard automation with 12 - 18 pallets Cajdpfex A Ackjx Ab Tea Tool carrier with driven tools, 12 stations Max. speed of driven tools: 6,000 rpm Includes various driven tools and chip conveyor Dimensions without chip conveyor (LxWxH), approx.: 2,720 x 1,500 x 2,400 mm Weight approx.: 6,500 kg

Condition: used, Year of construction: 2010, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2010 Control : Siemens 840 D Turning length : 1245 mm Caodpfx Asx Axyrob Toa In General: Year of construction:2010 Control system:Siemens 840 D Rotation diameter:1,600 mm Rotation height:1,245 mm Spindle / Table: Technology:Geared spindle Speed:450 rpm Power:60 kW Torque:13,400 Nm Faceplate:1,400 mm Max. table load:9,000 kg Tool carrier: Traverse path crossbeam:600 mm Traverse path chisel slide Z-axis:1,100 mm Traverse path chisel slide X-axis:+/- 950 mm Max. plunge diameter:340 mm Cross-section of chisel slide:250 x 250 mm Milling unit:2,000 rpm, 1,395 Nm Tool holder:SK 50 Equipment: Tool magazine:40 stations Chip disposal:Chip conveyor Coolant supply:IKZ system Tool holders:Various tool holders