Vertical lathe
HNK VTC-20/30

Year of construction

2025

Condition

New

Location

Bad Oeynhausen Germany

Show map

Machine data

Machine type:: Vertical lathe

Manufacturer:: HNK

Model:: VTC-20/30

Year of construction:: 2025

Condition:: new

Price & Location

Location:: Weserstr. 228, 32547 Bad Oeynhausen, Deutschland

Call

Technical details

Turning height:: 2,000 mm

Workpiece weight (max.):: 12,000 kg

Faceplate diameter:: 2,000 mm

Details about the offer

Listing ID:: A20350715

Update:: 22.10.2025

Description

CNC Vertical Turning Center
Model: VTC-20/30 with Fanuc 31i-B

Table diameter: Ø2,000 mm
Maximum swing diameter: Ø3,000 mm
Maximum turning height: 2,000 mm
Table speed: max. 200 rpm
Table load capacity: 12,000 kg
Table indexing: 0.001°
Z-Axis (vertical ram travel): 1,200 mm
Main spindle speed: max. 15 ~ 2,000 rpm
Ram size: 240 mm x 240 mm
Milling spindle taper: ISO 50
Tool shank size: 40 mm x 40 mm
Crossrail (vertical travel): 1,000 mm 250 x 4 stages (hydraulic)
Rapid traverse X-axis: 10,000 mm/min
Rapid traverse 7-axis: 10,000 mm/min
Cutting feed rate: 1 ~ 3,000 mm/min
Table drive motor: AC 45/55 kW (continuous / 30 min.)
Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.)
Control: Fanuc 31i-B
Display unit: 15-inch TFT-LCD
Tape memory: 1 MB
Automatic tool changer: 12 positions (for 5 turning tools + 1 cover + 6 milling tools)
Standard tool holders: New 240 TCR-01 (2 pieces)
Splash guard: Table version (R-type standard)
External coolant system: 3 bar (80 liters/min.)
Chip conveyor: hinge-type
Fodpfx Ajxqb D Nedvspd
4-jaw independent manual chuck
Foundation anchor bolts / shims
Maintenance tools and toolbox
Hydraulic power unit
Work area lighting
Signal lamp: 3 colors (green, red, yellow)
Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical instructions
Power supply: 220 V, 60 Hz, 3 phase
Machine color: manufacturer standard

OPTIONAL ACCESSORIES (#1)
Automatic tool changer ATC 24 positions - on request
Automatic shutdown for N.C - on request
Turning tool holder type 240TCR - on request
Through-spindle coolant supply: 30 bar (pump pressure) - on request
Transformer 415 V, 50 Hz, 3 phase - on request
Linear scales X, Z-axis - on request
Rigid tapping - on request
Automatic tool changer ATC 24 positions - on request

Other notes:
INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING - not included in the price
INSURANCE AND FREIGHT - not included in the price

Errors in the technical data excepted. The scope of accessories applies only as explicitly described in the article’s text. Any additionally pictured accessories, for example for illustration purposes, are not included in the offer.

The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

The listing was translated automatically. Translation errors are possible.

Documents

20350715-01.pdf

Seller

Registered since: 2020

10 listings online

Call

Send inquiry

Telephone & Fax

+49 172 2... show

These listings may also fit your interest.

Listing

5-axis tool grinding machine Walter Helitronic Power

Sonnenbühl

18,638 km

5-axis tool grinding machine
WalterHelitronic Power

Call

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC Tool Grinding Machine Walter Helitronic Power FH, Year of manufacture: 2015 Fanuc control system with cylindrical pallet loader, pallets from 4 mm to 25 mm 8-position disc changer, electrostatic mist collector fire extinguishing system, Software: Walter Window Mode and Toolstudio, Software packages: 001, 002, 003, 016, 017, 026, 090, 091, 098, 099, 032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard, with preparation for hydraulic unit (steady rest), The grinding spindle (single spindle) is directly driven and equipped with an oil cooler. Fpedpfx Adoyh Dl Nsvod The hollow shaft motor for the A-axis operates at a speed of 0-750 rpm. The C, X, Z, and A axes were overhauled in 2022.

See details

Listing

CNC Turning- and Milling Center WFL M120 MILLTURN x 3000

Europa

17,901 km

CNC Turning- and Milling Center
WFLM120 MILLTURN x 3000

Call

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Multifunctional CNC Turning, Boring and Milling Centre / Manufacturer: WFL Type: M120 MILLTURN x 3000 / Year of construction: 2008, Overhauld in 2025 TECHNICAL DATA: Fsdpfsxt Uqhjx Advjpd Working range: - Centre distance / turning length (depending on clamping device): 3.000 mm - Swing diameter over bed (max. nominal dimension): 1.220 mm - Swing diameter over top of slide: 1.140 mm Accessories / Equipment: - Siemens SINUMERIK 840D CNC control pl - Turning/drilling/milling unit - NC tailstock - External tool magazine, 90-positions - Pick-up station - Cooling system - Chip conveyor - Further extensive equipment ... Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -

See details

Listing

Drilling machine and milling machine TOS VARNSDORF WHN 13.8 C

Jászberény

17,922 km

Drilling machine and milling machine
TOS VARNSDORFWHN 13.8 C

€30,000

EXW Fixed price plus VAT

Call

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-16 1990, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, A machine in good condition, as shown in the pictures, manufactured in 1990 and equipped with NCT 90 control. It has been used very little and is being sold due to underutilization. The total weight of the machine is 33 tons. The machine is fully operational. Disassembly and transportation are the responsibility of the buyer. Fjdpfx Ajw Sx Agedvspd

See details

Listing

Gear Hobbing Machine - Horizontal PFAUTER P 160 H

Germany

18,510 km

Gear Hobbing Machine - Horizontal
PFAUTERP 160 H

Call

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels Fpjdpsvzhf Sjfx Adved - Milling arbors - Clamping devices - Documentation

See details

Listing

Wetzlar

18,529 km

CNC lathe
LT-30 M

Call

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 415 mm, turning length: 850 mm, turning diameter: 390 mm, spindle bore: 105 mm, spindle speed (max.): 2,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 1,980 mm, total length: 4,600 mm, total width: 1,900 mm, quill diameter: 100 mm, quill stroke: 120 mm, overall weight: 7,000 kg, bar passage: 90 mm, chuck outer diameter: 300 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: documentation/manual, max. turning diameter 390 mm Z-axis travel: 950 mm Fsdpfxjfk Et Aj Advjpd max. spindle speed: 2000 rpm AC spindle motor SIEMENS (cont./15min) 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Including accessories a. o: SAUTER 12-station turret VDI-40 Trifix holder for driven tools C-axis with spindle clamping and stabilization Wide and stable flat guides 45° inclined bed for optimum chip fall Hinged belt chip conveyor with chip bucket 3-jaw Kitagawa power chuck ø 300 mm Tool measurement can be swiveled in manually Hydraulic tailstock manually adjustable with programmable tailstock quill Coolant unit with powerful pump (4 bar) Rittal filter fan on the control cabinet

See details

Listing

Heavy-duty lathe TORNI TACCHI FTC model 51

Athens - Akadimia Platonos

17,550 km

Heavy-duty lathe
TORNI TACCHI FTCmodel 51

€43,000

Fixed price plus VAT

Call

Condition: like new (used), MACHINE DATA TORNI TACCHI FTC model 51 OVERALL DIMENSIONS Center distance 4000 m/m Height 1550 m/m Width 1400 m/m Length 6200 m/m Weight 10.000 Kg Swing over bed 1120 m/m Swing over carriage 810 m/m Swing over gap 1350 m/m Hole through spindle 123 m/m Number of speeds 18 Range of speeds 7-550 / 1’ Fpedpfed Tm D Esx Adved Horsepower of motor 25HP Morse taper № 6 Metric threads – inch – module – pitch 3 jaw chuck 450 m/m Face plate 850 m/m Extra face plate 1420 m/m Good condition

See details

Listing

Germany

18,384 km

CNC Machining Center
HellerMCH 250

Call

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Fjdpfx Adjuxdhuevspd

See details

Listing

Germany

18,654 km

HERMLE C40U
HERMLEC40U

Call

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,000 h, spindle speed (max.): 18,000 rpm, overall weight: 10,500 kg, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 5, This 5-axis HERMLE C40U universal machining centre was manufactured in 2007. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis, with a rapid traverse of 45 m/min. The machine is equipped with a spindle speed of 18,000 rpm and a tool changer with 38 positions. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U machine we have for sale. Contact us for further details. • Operating voltage: 400 V / 3~ • Mains frequency: 50 Hz • Control voltage: 24 V • Total power: 41 kVA • Total nominal current: 60 A • Master circuit diagram: 1-322-MS-96-002 • Rapid traverse: 45 m/min • Tool changer: 38 positions • Axis configuration: 5-axis • Linear axes: X, Y, Z • Rotary axes: A-axis (off-centre), C-axis (NC swivel rotary table Ø420 mm) • NC swivel rotary table: Ø420 mm • Internal coolant supply (IKZ): 80 bar • Laser tool measurement / breakage monitoring • Measuring probe: Heidenhain • Electronic handwheel • Electronic thermal compensation • Spindle hours: approx. 14,000 h (spindle replaced 11.2017) • Accessories: Without tools, tool holders and zero-point clamping systems Additional equipment • Paper band filter • Chip conveyor Fedsyly A Iepfx Advjpd • Chip flushing gun • Oil mist extraction Technical Specification Taper Size HSK 63

See details

Listing

Werlte

18,394 km

CNC lathe
DOOSANPuma 700 M II

Call

Condition: excellent (used), Year of construction: 2022, CNC Lathe Doosan Puma 700 M II Control: Siemens Sinumeric 828 Year of manufacture: 2022 Turning length: 1,600 mm Turning diameter: 900 mm X-axis travel: 470 mm Z-axis travel: 1,650 mm Spindle speed: 3 – 1,500 rpm Tool turret: 12 stations (all driven) Tool holder: BMT 85P Equipment: Self-centering steady rest Chip conveyor Touch setter 3-jaw chuck Programmable tailstock Extraction system Fpjdpfeyk Tdisx Advjd Coolant pump 20 bar with cyclone filter Oil mist extractor

See details

Listing

Hydr. three-roll round bending machine ROUNDO 2000 x 18/12 mm

Kreuztal

18,529 km

Hydr. three-roll round bending machine
ROUNDO2000 x 18/12 mm

Call

Condition: good (used), Technical data: Working length: 2050 mm Max. bending capacity: 18.0 mm Pre-bending: 12.0 mm Top roller diameter: 280 mm Bottom roller diameter: 280 mm Conical bending device Hydraulic drop-end bearing Motor power: 7.5 kW Dimensions (length x width x height): approx. 3650 x 1550 x 1650 mm Weight: approx. 7.5 tonnes Fpsdpexruvzefx Adved The seller is not liable for typing or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee.

See details

Advertise here