Used Lathe Machine Heavy for sale (66,771)

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Bljdpfsxdmgvsx Adrei Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: used, Year of construction: 2004, XYZ Proturn VL 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2004) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Bjdpfx Aszav N Tsdrsli Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2004 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards 3 Toolholders TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79196 Machine Serial Number: SL091 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant Bodpfx Aozav D Dedreli For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2016) Stock Number 2851 Protrak SLX CNC Swing over bed 560mm Swing in gap 935mm Swing over cross slides 350mm Distance between centres 3000mm Spindle bore 104mm Additional Features Protrack SLX Control Blsdpfex Hp I Rox Adrji Drilling Attachment 4 Way Toolpost 3 Jaw Chuck 3 Point Steady

Condition: excellent (used), Year of construction: 2017, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2017) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Indexing Toolpost Blodpfey R Rdhsx Adrei Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. 3 Point Fixed Steady Travelling Steady Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79001 Machine Serial Number: SLM00072 £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Bljdpfoyaywhox Adroi Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,350 kg, empty load weight: 4,350 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2023, operating hours: 811 h, platform length: 4,500 mm, transport length: 2,950 mm, transport width: 2,280 mm, transport height: 2,550 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, Used MW1000 Pile Driving Machine in Good Condition. The MW1000 pile driving machine is a high-performance and versatile unit designed for efficient and precise pile installation in various applications such as solar power plants, highway guardrails, vineyard installations, and construction projects. Working Hours: 811 hours Year of Manufacture: 2023 Optional Equipment: Screw Attachment, DTH and Auger Drilling Attachment, Pile Extractor, GPS/GNSS, Remote Control, and Automatic Leveling System Engine Brand: YANMAR Power: 35 kW / Stage 5 – 42 kW / Stage 3 Rated Speed: 2200 rpm Fuel Tank Capacity: 60 liters DPF Filter: Standard on Stage 5 engines Hammer Power: 1200 Joules Operating Pressure: 120 bar Impact Frequency: 570 – 1180 blows/min Hydraulic System Flow Rate: 50 – 100 L/min Pressure: 180 bar Hydraulic Oil Tank: 150 liters Travel / Mobility Low / High Speed: 2.2 / 4 km/h Climbing Ability (pile driving): 20% Side Slope (curb operation): 10° Track Type: Rubber tracks Dimensions Transport Width: A1 – 2280 mm Transport Height: A2 – 2550 mm Transport Length: A3 – 2950 mm Machine Width: A1 – 2280 mm Machine Height: A4 – 4400 mm Machine Length: A5 – 3110 mm Mast Height: A6 – 4500 mm Weight: 4350 kg Movement Capabilities Rotation: None Tilt: 10° Bsdey Efbdopfx Adroli Mast Forward Tilt: 12° Mast Backward Tilt: -63°

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,350 kg, empty load weight: 4,350 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, platform length: 4,500 mm, transport length: 2,950 mm, transport width: 2,280 mm, transport height: 2,550 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1000 pile driver is a high-performance, versatile machine designed for efficient and precise pile installation in various solar park, guardrail, vineyard, and construction applications. Bledsx Tf R Ujpfx Adroi

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,750 kg, empty load weight: 4,750 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, transport length: 3,820 mm, transport width: 1,980 mm, transport height: 2,365 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1200 pile driver is a high-performance and heavy-duty machine designed for efficient and precise pile installation in a variety of construction applications. With its powerful hammer, extended mast height of 6.1 m, and adjustable settings, the MW1200 is ideal for solar farms, fencing, guardrails, and infrastructure projects. Bodpjx Tg Dpjfx Adrsli

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,800 kg, empty load weight: 4,800 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, platform length: 4,700 mm, transport length: 3,820 mm, transport width: 1,980 mm, transport height: 2,365 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1000-TX5 pile driver is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1000TX-5 provides superior control and precision, even in challenging terrains. Bljdsx Tg Etspfx Adrji 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains.

Condition: new, functionality: fully functional, mileage: 4 km, power: 45 kW (61.18 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 5,200 kg, empty load weight: 5,200 kg, operation weight: 5,200 kg, mast type: duplex, Year of construction: 2025, platform length: 6,500 mm, transport length: 2,240 mm, transport width: 44,145 mm, transport height: 2,315 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1600-TX5 pile driver is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1600TX-5 provides superior control and precision, even in challenging terrains. 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. Bjdox Tg Nxepfx Adroli 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains.

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a HAGER HDG 250 lathe in mint condition with a center width of 1,000 mm. The exhibition machine is in original condition, therefore you have the full warranty. Technical data Bjdpfxjtpnyke Adrsli - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) safety groove - Spindle bore (diam.) 20 mm - Tailstock quill 150 mm / MK3 -Hand rest upper section 300 mm -Weight 270 kg -Length x width 1,800 x 640 mm - Motor 2.2 kW / 3 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: lathe, lathe machine, lathe, lathe, woodturning, woodturning machine, turning, woodturning knife, turning, machine, Hager Reference: R-A0117

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER HDE 300 lathe with a motor output of 3 HP. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Center height 300 mm - Center width 1,000 mm (extendable*) - Electronic speed control (100-450 / 300-1,100 / 750-2,700 rpm) - Hollow spindle D = 20 mm with inner cone MK3 - Quill travel 150 mm - Motor 3 HP / 400 V - Weight 276 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Bedpotpnu Rsfx Adreli If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, woodturning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: excellent (used), Year of construction: 2019, COURSE ROOM MACHINE For sale is a used Hager HDG 250 lathe with a center height of 250 mm. The machine was used in our in-house lathe courses, is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Technical data: - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) drain safety groove - Spindle bore (diameter) 20 mm - Tailstock quill 150 mm / MK3 - Hand rest upper part 300 mm - Weight 270 kg - Length x width 1,800 x 640 mm - Motor 2.2 kW (3 HP) - Speed 150 - 2,700 rpm The lathe is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Blsdpfxjrtqi Ij Adroi If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, lathe, woodturning bench, turning, woodturning knife, woodturning, turning, machine Reference: DH25500-K

Condition: like new (used), DEMONSTRATION MACHINE A Stratos XL demonstration lathe with a center height of 280 mm is for sale. The lathe was only used for a short time for demonstration purposes at Hödnerhof. It can therefore be described as as good as new with full guarantee / warranty. Technical data: - Center height 280 mm - Turning diameter above the bed: 550 mm with optional additional bed (external turning device) up to 1,000 mm! - Center width approx. 780 mm (extendable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock with MK2 cone - Frequency converter (3 belt stages): Stage 1: 60 - 1,200 rpm | Stage 2: 100 - 2,200 rpm | Stage 3: 150 - 3,700 rpm - Quill travel 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor 2.2 kW / 3 HP - Weight approx. 320 kg The machine is located at Hödnerhof in A-6341 Ebbs. Subject to prior sale! Pick up address: Bljdeu Szr Uepfx Adrei Hödnerhof Blumenwelt Eichelwang 2 A-6341 Ebbs Related terms: woodturning machine, lathe, lathe, lathe, woodturning, woodturning knife, wood turning, turning, machine Reference: DDSTRATOSXL-VH

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Bjdpfx Aexddvnsdrsli Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 630 mm, turning length: 3,000 mm, total length: 5,500 mm, total width: 1,600 mm, total height: 1,600 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 6,400 kg, The PORĘBA TRP-93/3M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, inspection possible anytime Blodpfjzht I Iox Adroi Technical data: - distance between centers/turning length: 3000 mm - turning diameter over bed: 930 mm - turning diameter over support: 630 mm - turning diameter in bridge recess: 1150 mm - spindle bore diameter: 105 mm - power drive on upper compund slide for cone and taper turning - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 5500 mm width: 1600 mm height: 1600 mm total weight: 6400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, (no steady rests) Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick change tool post

Condition: ready for operation (used), FANUC circuit board. Blodpfx Ajzib Acjdroi

Condition: defective spare-parts repository (used), Intended for use as a spare part. The drive mechanism is not functioning. Bodpfx Aszibyusdreli

Condition: excellent (used), !!!DEMO MACHINE!!! For sale: a Drechselmeister MIDI 2 Plus lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Technical data: - Center height approx. 178 mm / Swing diameter 355 mm - Center distance approx. 400 mm (extendable with optional bed extensions) Bedpozgr Sisfx Adreli - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 RPM - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) safety groove - Tailstock with interchangeable tailstock spindle 100 mm MK2, trapezoidal thread, and measuring scale! (Optional: interchangeable tailstock spindle with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, turning tool, woodturning, turning, machine Reference: R-D1618

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Drechselmeister MIDI 3 lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our specialist personnel. (Fully functional) Technical data: Bljdpfx Adjzgr Nusroi - Center height 190 mm / Turning diameter approx. 378 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - 3 belt stages / speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) drain safety groove - Tailstock with interchangeable quill 100 mm MK2, trapezoidal thread, and scale! (Optional: Interchangeable quill with ER25 collet chuck system for drilling) - Motor 0.7 kW / 1 HP (230 V) with high-quality frequency inverter and “SAFE-START” function - Weight approx. 60 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, lathe tools, woodturning, machining, machine Reference: R-D1618

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Drechselmeister Twister XL lathe with a center distance of approximately 800 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (Fully functional) Technical data: - Center height 250 mm - Swing over bed 490 mm (up to 900 mm with optional external turning attachment!) - Center distance approx. 800 mm (extendable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper MK2 - Frequency inverter (2 belt stages) 60 – 1,350 rpm and 150 – 3,600 rpm - Quill travel 150 mm (with scale) and trapezoidal lead screw Blsdszgr Hgjpfx Adrei - Motor 1.5 kW / 2 HP - Weight approx. 290 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, lathe machine, wood lathe, turning, lathe tools, wood turning, turning, machine Reference: R-D1618

Condition: used, functionality: fully functional, Genini Miniautomat – automatic lathe Automatic lathe for turning square stock Hydraulic pump motor with a power of 1.5 kW Maximum length of square stock: 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Two tool posts with profiling tools 1 front spindle for drilling or front profiling Bodpozgc Rcefx Adreli 1 roughing tool Machine weight: approximately 1800 kg CE marking

Condition: excellent (used), CATALOG NUMBER 6901 TECHNICAL DATA - max turning length: 1200 mm - max turning diameter: 210 mm - max turning diameter with standard steady rest: 90 mm - max dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copy attachments - additional 3 tools on hydraulic pistons (2 pieces installed) - 4 spindle speeds - automatic or manual machine operation - spindle motor power: 9 kW - hydraulic pump motor power: 3 kW - extraction nozzle diameter: 90 mm - transport dimensions (L/W/H): 3700x2100x2000 mm - weight: approx. 3000 kg ADVANTAGES – Italian production – automatic hydraulic copy attachment – original technical documentation (DTR) – not repainted Blsdpfx Adsyy Ngmerei – used lathe, in very good condition Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated at the rate 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: used, A02B-0092-C146 FANUC 0-M Operator Panel, used. Bedpfx Aezhkrwsdrjli