Used Heating Installation for sale (20,265)

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm Bodjxtvb Uopfx Amyodf 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Condition: used, Year of construction: 1997, functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system - Year of release: 1997 - manufacturer: Komforts - Power 1 mW. - moving floor supply system with hydraulic station, - chimney, - pumps, Bedpfxev D Uz Eo Amyodf - control, - hot water accumulator.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 157090207, functionality: fully functional, pressing force: 180 t, stroke length: 325 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 180 t Max. hydraulic pressure: 600 bar Cylinder stroke: 325 mm Opening: 325 mm MACHINE DETAILS Control: Electronic control with operating panel/CNC Voltage: 400 V / 50 Hz Design: Industrial design Bsdpfx Aeznmb Iemysdf EQUIPMENT Enclosed safety cabin Hydraulic press system Heating plate press Molding press

Condition: used, Year of construction: 1994, functionality: fully functional, Used storage tank/heating oil tank Vertical design Storage volume: 40,000 liters Complies with DIN 6616 D, double-walled construction Bedpfszq U U Uex Amyedf Cleaned and decommissioned

Year of construction: 2005, condition: excellent (used), Name: Lödige heating/cooling Mixers Manufacturer: Lödige Type: TSHK160 / KGU400 Year built: 2005 Total content: COOLING MIXER: vessel capacity: 391, Jacket capacity: 45 liters. RAPID HEATING MIXER: vessel capacity: 210 liters. Jacket capacity: 30 liters Speed: 104 / 300-1500 rpm Driving force: BEVEL GEAR MOTOR: 11 kW, n1 = 1300 rpm, n2 = 104 rpm and ENGINE IM V1 Frequency controlled: 45kW 300/1500 rpm Operating voltage: 400 V, 50 Hz Material: Stainless steel Hours of operation: Very few operating hours Bedpeiup H Tefx Amyedf Design: ATEX version / Explosion proof Gear box: Bevel gear motor/ motor frequency controlled Parts in contact with product: Stainless steel 1.4541 Dimensions: L 4605 x W 4225 x H 3550 mm Technical doc.: Yes Message: It was used in a technical plant for wood chip and melamine resin additives. Accessories: Platform with stairs, 30 kW temperature control unit, control panel, control cabinet, dust filter DN 200/ 100 und DN 150/ 100

Condition: used, This listing is for a IKA RCT B S002 Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The IKA RCT Basic Magnetic Stirrer is a highly versatile and reliable laboratory device, combining precision stirring with integrated heating capabilities. Designed for various lab applications, it ensures consistent performance, safety, and ease of use. Key Features: Wide Speed and Temperature Range: Powered by a strong motor, it supports a high range of stirring speeds and operates with adjustable heating plate temperatures between 50°C and 310°C. Digital Display for Accuracy: Bdsdpfsxxz Ukjx Amyef Allows exact setting of temperature and speed, even when the unit is turned off, with a safety temperature limit displayed digitally. Hot Surface Warning: The Hot Top indicator alerts users when the heating plate remains hot, reducing the risk of burns. Automatic Safety Features: Switches off automatically if the connected external temperature sensor is not properly immersed, with timeout duration adjustable. Bushing for Contact Thermometer: Compatible with contact thermometers like ETS-D5, ensuring precise external temperature control for sensitive applications. Aluminum Heating Plate: Optimized for superior heat transfer and fast heating of samples. Enhanced Durability and Design: The enclosed assembly (IP 42) protects the unit against splashes and contaminants, extending its service life. Improved Magnetic Adhesion: Ensures stable stirring, even at higher speeds. Error Code Display: Provides digital error codes for straightforward troubleshooting.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Bodjykvdlopfx Amyjdf Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: ready for operation (used), The FluidX HT121TS is a semi-automatic sheet heat sealer designed for laboratory plate sealing. Key Technical Specifications Device Type: Semi-automatic sheet heat sealer. Weight: Approximately 5 kg (net). Application: Used for applying thermal seals to microplates, typically in conjunction with FluidX sample storage tubes. Bsdpfx Asy D D Umjmyodf Format Compatibility: Designed to handle various plate formats common in automated workflows. Operational Features Variable Temperature: Supports a range of temperatures for different sealing materials. Manual/Semi-Automated Integration: Compatible with both low-throughput manual tasks and high-density automated storage systems. Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2014, functionality: fully functional, Coated web width 1315 mm Max. web width 1330 mm primary unwinder: 1000 mm secondary unwinder: 1200 mm rewinder: 1200 mm Bedpfx Amowp R Hteyodf speed: 400 m/min Accessories: - Solvent-less mixer Nordmeccanica - Continuous filling World Mixer (with 4 tanks of 200 kg) - 5 rolls Materials: COATED WEB BOPP 12 - 80 μ, PETP 10 - 30 μ, LDPE, LLDPE 30 - 200 μ, OPA 12 - 18 μ, NYLON CAST 30 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 60 - 150 μ, PAPER 40 - 150 gr/m2 LAMINATED WEB BOPP 12 - 80 μ, PETP 8 - 30 μ, LDPE, LLDPE 20 - 200 μ, OPA 12 - 18 μ, NYLON CAST 20 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 20 - 150 μ, COEX FILM 25 - 200 μ PAPER 40 - 150 gr/ m2

Year of construction: 2014, operating hours: 59,436 h, condition: ready for operation (used), functionality: fully functional, Buderus Loganova EN20 CHP unit – 19 kW electrical / 38 kW thermal – Year of manufacture 2014 For sale is a combined heat and power (CHP) unit from the manufacturer Buderus, type Loganova EN20, from a commercial property in Stuttgart. The unit will be decommissioned as part of an upgrade to the energy supply. Technical data: * Manufacturer: Buderus * Type: Loganova EN20 * Year of manufacture: 2014 * Electrical output: 19 kW * Thermal output: 38 kW * Operating hours: 59,436 h * Start cycles: 6,031 * Maintenance: Premium maintenance contract since commissioning Condition of the unit: The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. According to initial assessment, the heating water pump is defective. The CHP unit is currently out of service. Location & Availability: Location: 70567 Stuttgart Planned decommissioning / dismantling: June–July 2026 Note: Regularly maintained unit with documented service history. Sale due to a unit upgrade. Inspection possible by appointment. Bdsdpfjzd Uhhox Amyjf If you are interested, we will gladly send you further information and photos.

Condition: good (used), Year of construction: 2010, For Sale: Raw Material Dosing System Brand: AZO Year of manufacture: 2010 Included: - 8x dosing tank 500 liters - complete documentation - frames - load cells - dosing screws If you have any questions or comments, please feel free to contact us. Bdodpfx Amoy Spg Reyof Inspection is possible on site. Best regards, Leo Holland

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, heating capacity: 55 kW (74.78 HP), smoke pipe connection diameter: 200 mm, input voltage: 220 V, HDG wood-burning boiler, top-loading, heating output 55 kW, suitable for 50 cm logs. Year of manufacture: 1995. The boiler is still connected and operational and can be inspected until August 24, 2026. Bdedpszp R Egefx Amyof The boiler is completely dry and leak-proof; it was only used during the winter and therefore rarely operated near the dew point. During the transitional seasons, our 49 square meter solar panel system provides sufficient heating energy. Pick-up price is 3,300 euros net.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH Bdjdpfx Amezp Rmqsysf - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: ready for operation (used), Year of construction: 1994, operating hours: 28,000 h, functionality: fully functional, overall weight: 8,000 kg, power: 450 kW (611.83 HP), heating capacity: 450 kW (611.83 HP), smoke pipe connection diameter: 400 mm, temperature: 90 °C, total height: 1,900 mm, total length: 3,000 mm, total width: 1,800 mm, type of input current: three-phase, input voltage: 380 V, Equipment: documentation/manual, hot water, Automatic wood chip boiler with automatic fuel feeding. The combustion chamber was relined in 2023. Bjdpfx Aezp H N Usmyodf

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, INDUSTRIAL ELECTRIC HEAT TREATMENT FURNACE - EMISON Electric heat treatment chamber furnace manufactured by EMISON (Forns Elèctrics Emison SA, Badalona, Spain), a Spanish specialist in industrial furnaces. From an industrial company liquidation (insolvency proceedings). ═════ SPECIFICATIONS ═════ - Manufacturer: EMISON (Forns Elèctrics Emison) - Country of origin: Spain (Badalona) - Type: Electric heat treatment chamber furnace - Power supply: 380V three-phase - Heating: electric resistance elements - Temperature control: analog - Large heating chamber - Robust metal frame construction - Model: [TO BE CONFIRMED FROM NAMEPLATE] - Max temperature: [TO BE CONFIRMED] - Total power: [TO BE CONFIRMED] - Chamber dimensions: [TO BE CONFIRMED] ═════ CONDITION ═════ - Used, from an industrial closure (not due to malfunction) - Frame in good condition - Sold as-is, a full inspection is welcome before pickup - Original manual NOT included - No warranty implied ═════ ABOUT THE MANUFACTURER ═════ EMISON (Forns Elèctrics Emison SA) is a Spanish industrial furnace manufacturer based in Badalona, Barcelona, and is still active today. The manufacturer provides technical support and spare parts directly for existing units. This makes EMISON furnaces a safer choice than those from defunct brands. ═════ APPLICATIONS Bdodpszbg Rqofx Amyof ═════ Suitable for: - Heat treatment of metal parts (annealing, tempering, hardening preheat) - Industrial drying processes - Ceramic firing (low-medium temperature) - Curing of coatings and paints - Laboratory and R&D thermal processes - General industrial heating ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Madrid, Spain (or Barcelona) - Weight: [TO BE CONFIRMED - approx. 600-1,000 kg] - Loading: forklift required - Inspection welcome by appointment - Payment: bank transfer - Documents: invoice provided - International shipping possible — buyer arranges transport Keywords: EMISON furnace, heat treatment furnace, electric industrial oven, chamber furnace, Spanish furnace, annealing oven, drying oven, tempering furnace, industrial heating equipment. For technical questions, additional photos, or to schedule an inspection, please send a message.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Bdodpfxozpy Ide Amyef Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: good (used), APV Heat Exchanger. Type : N35. Normal capacity : 6.5m3/H. Transmission surface : 67,9m2. Working pressure : 6bar. Test pressure : 6bar. Volume, Side 1 : 94liter. Volume, Side 2 : 94liter. Working temperature, MAX/MIN. Degrees Celsius. 120/0. Bdedporwl I Hsfx Amyjf ORA.18

Condition: used, Year of construction: 1988, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 20992, Dear Mr. / Mrs., we have opportunity to offer you IPSEN VTTC-324 from 1988. Bdsdpfjwah R Rex Amyof Characteristic of vacuum furnace: Sn = 165 kVA Un = 400 V, 50Hz In = 240 A Useful dimension: 450mm x 600mm x 900mm Power of heaters = 120 kW Voltage of heaters = 43V, 50Hz Current of heaters = 1613 A Temperature range = 350 - 1320 C Absolute vacuum = 1 x 10e-5 (diffusion pump) Absolute pressure = 5 bar Also, with furnace is coming lot of spare parts and equipment for thermal heating process (tank for gas, heaters, lot of controllers, chargers and everything). For all information that you need, please contact me.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,765 h, load capacity: 5,000 kg, lifting height: 4,400 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,950 mm, gearing type: converter, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 250 X 75 - 12, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,950 mm, total length: 2,650 mm, total width: 2,700 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C5000ET – 2013 | 9,765 HOURS | ELECTRIC | DUPLEX 4400 mm --- 🚀 Ready to operate from day one – no investment, no risk --- ### ✅ Why choose this forklift? Are you looking for a forklift that won’t disrupt your operations? This COMBILIFT C5000ET is a tested unit after full service – ready to run immediately without hidden costs. ✔ Fully serviced (oils, filters, total inspection of all components) ✔ Technical and visual condition: like new ✔ Only 9,765 operating hours – genuinely low mileage ✔ New tyres – no additional investment needed --- ### ⚙️ Main specifications * Capacity: 5,000 kg * Drive: ELECTRIC ⚡ * Mast: Duplex – 4,400 mm lift height * Fork positioner: 1,150 mm * Forks: 1,200 mm * Cabin: Full cabin with heating and air conditioning --- ### 📋 Full technical specification General info: * Year of manufacture: 2013 * Operating hours: 9,765 MTH Bjdpezpau Rofx Amyjdf * Capacity: 5,000 kg * Load centre: 600 mm * Truck weight: 7,500 kg Mast and lifting system: * Mast type: Duplex * Lifting height: 4,400 mm Forks and attachments: * Fork positioner: 1,150 mm * Fork length: 1,200 mm * Free lift: 2,000 mm Dimensions: * Height: 2,600 mm * Length: 2,650 mm * Width: 2,700 mm * Overall height: 2,950 mm Running gear: * Tyres: Super elastic (100%) – new * Front: 16 x 7 x 10 1/2 * Rear: 250 x 75 - 12 Equipment: * Full cabin * Fork positioner * Heating Condition: * Technical: 5/5 – fully serviced * Aesthetic: Refurbished, like new, no corrosion --- ### 🏭 Perfect for: ✔ Narrow aisle warehouses ✔ Timber, steel and pipe industries ✔ Handling long loads ✔ Indoor and outdoor use --- ### 💡 What you’re buying This is not just a “used forklift.” You’re purchasing a fully prepared, ready-to-work machine: ✔ Every unit is thoroughly tested prior to sale ✔ Ready for immediate implementation ✔ Live online demo possible 🎥 ✔ Delivery direct to your company available 🚛 --- ### 🌍 Delivery and support * Transport across Europe * Complete logistics handling * Leasing / finance support * After-sales service --- ### 🏆 Why FT LOGISTICS? We deliver forklifts that work – not ones that end up in the workshop. ✔ Over 100 machines available ✔ In-house servicing and prep ✔ Europe-wide experience ✔ Hundreds of satisfied customers --- ### 📞 Contact us now FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: used, Technical Specifications Manufacturer: Stahl Type: 8220 Design: Industrial furnace / Chamber furnace Condition: Used Further technical specifications according to the nameplate Equipment Robust and durable construction Electric heating Temperature control for precise processes Good heat distribution in the working chamber Suitable for professional use Application Areas Heat treatment of metal parts Annealing and tempering Drying processes Preheating of workpieces Laboratory and testing applications Research and development Chamber dimensions (internal): W 1000 H 1000 Bdedpfx Aeznv Eiemysf D 800

Condition: used, We offer Viessmann natural gas boilers: 1. Viessmann gas boiler TYPE SX 1 Heating output 225 kW Including pump and valves 2. Viessmann gas boiler TYPE SX 1 Heating output 170 kW Including pump, valves, and piping Bjdpfx Amsy Dpk Hsysdf You will receive a discount when purchasing both boilers.

Condition: used, Manufacturer: W.C. Heraeus Hanau Type: KR 260 Machine type: Electric chamber furnace / laboratory furnace / heat treatment furnace For sale is a high-quality industrial furnace from the renowned manufacturer W.C. Heraeus Hanau, model KR 260. The furnace is ideally suited for heat treatment processes, annealing, material testing, laboratory applications, as well as research and development tasks. Features: Robust industrial design Electrically heated chamber furnace Uniform temperature distribution Temperature control for precise processes Ideal for laboratories, workshops, industry, and research Solid German quality manufacturing Maximum temperature: 1150°C Voltage: 330V 50Hz Power: 11.4kW; 20A Application areas: Bdsdpfxoznvzds Amyjf Heat treatment of metals Annealing and hardening Material tests Ceramic and laboratory applications Research and development Chamber dimensions (internal): Width: 260 Height: 180 Depth: 500

Condition: good (used), Year of construction: 2004, For sale is a functional and very well-maintained oil burner from the brand Weishaupt, model L7T-1965kw. 1. Burner type: L7T Output: 320 - 1965 kW Heating oil: 27-165 kg/h Design: D Year of manufacture: 2004 Bedpey Ut Dxefx Amyjdf

Condition: ready for operation (used), CHP plant / Combined heat and power plant with MAN gas engine – manufactured in 2016. For sale is a combined heat and power plant (CHP) with a MAN gas engine and an APROVIS heat exchanger. Technical data: * Heat exchanger manufacturer: APROVIS Energy Systems Bdjdpfx Ajznn Aaemyjf * Year of manufacture: 2016 * Heat output of heat exchanger: 32 kW * Engine: MAN gas engine * Robust industrial design * Ideal for energy and heat generation The system is suitable as a source of spare parts, for refurbishment, or for continued industrial use. Condition: Sold as shown in the pictures. Inspection possible by appointment. Electricity: 50 kW. Heating: 80 kW.

Condition: used, Dimensions (LxBxH): 135 x 55 x 102 cm Boe-Therm Temp 300 – Oil Heating Unit Bdodpfxsxpva As Amyjf Serial number: 83054 Type: Temp 300-36-4 VE General Data - Medium: Thermal oil - Oil capacity: 98 liters - Max. temperature: 300 °C - Heating capacity (kW): 36 kW - Voltage: 3 x 400 V / 24 V - Frequency: 50 Hz - Power consumption: approx. 54.8 A - Control system: Electronic panel with digital display and control buttons - Safety features: Overtemperature, oil level, and pressure monitoring Applications - Temperature control in plastics industry (injection moulding, extrusion) - Metal processing (heating systems, forming presses) - Woodworking (veneer presses, laminating presses) - Other processes requiring stable and high temperatures Function The unit heats thermal oil and circulates it through external circuits (such as moulds, press plates, or installations). This ensures a constant temperature up to 300 °C, with high precision and reliability. - Documentation available: No - CE certificate present: No - Serial number: 83054 - Transport dimensions: 1350mm x 550mm x 1020mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum