Used Heating Installation for sale (22,493)

Condition: excellent (used), Year of construction: 2006, ARBURG 320 C 400-170 injection molding machine Iiodpfx Amjzw A Ehs Hsg Year of manufacture: 2006 Clamping unit Clamping force: 400 kN (40 tons) Distance between tie bars (H × V): 320 × 320 mm Injection unit Screw diameter: 30 mm Maximum injection volume: 85 cm³ Maximum injection shot weight (PS): 77 g Maximum injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle clamping force: 40.6 kN Heating power: 9.4 kW Drive and power Pump drive power: 11 kW Total installed power: approx. 20.5 kW Dimensions and weight Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg Additional information The machine is equipped with a new screw, which is covered by a warranty.

Condition: used, Year of construction: 1996, Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor belt sections and components palletized - ready for immediate collection. Technical data - Manufacturer: KHS (Klöckner Holstein Seitz) - Model: Innopas P II SG 30-200 - Year of manufacture: 1996 - Machine type: tunnel pasteurizer - Capacity: approx. 24,000 - 25,000 bottles/hour (depending on bottle format) - Treatment area: 113.5 m² - Treatment zones: 8 (H1-H3, S, P, C1-C3 plus cooling tower zone), 3 recuperative - Max. pasteurization temperature: 75.0 °C (0.7 l) / 72.5 °C (0.33 l) - Inlet temperature: 15.0 °C; outlet temperature: approx. 32 - 38 °C depending on format - Total treatment time: approx. 48.6 min (0.7 l) / 77.1 min (0.33 l) - Pasteurization units: approx. 5 PE - Machine water content: approx. 14.4 m³ - Water consumption at nominal capacity: approx. 1.5 m³/h - Heat consumption at nominal capacity (0.7 l): approx. 3,672 MJ/h - Installed power: approx. 66.2 kW - Electrical connection: 400 V, 50 Hz - Dimensions (L x W x H): approx. 21,000 x 4,210 x 2,750 mm - Required entry opening: approx. 2.7 x 3.0 m - Net weight: approx. 27,500 kg - Noise level: ≤ 85 dB(A) according to ISO 3744 Equipment - Siemens SIMATIC S5 PLC (main control) - Pasteurization unit setting (temperature diagram) upgraded to Siemens S7 with touch panel Iiedpozwxu Sjfx Am Heg - Danfoss frequency drives - Modular plastic conveyor belt with drainage openings, belt sections palletized - External pump assemblies and inspection windows - Electrical cabinets with main disconnect switch - Original KHS documentation (datasheets and drawings) Condition Used. The machine is completely dismantled and stored; belt sections, piping and components are palletized for transport. The machine can be visited on request. Availability Immediately. Location: Germany. Loading by the seller is possible.

Condition: used, Year of construction: 2003, machine/vehicle number: 3945, functionality: fully functional, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering Iijdpoyn Rgvjfx Am Hog It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Year of construction: 2004, condition: used, functionality: fully functional, maximum load weight: 125 kg, loading space volume: 2.5 m³, machine/vehicle number: 3881 and 3690, Lot of 2 – TUPESA SC 125 V Industrial Steam Tumble Dryers (2004) Two High-Capacity Steam-Heated Tilting Drum Dryers An excellent opportunity to acquire two heavy-duty TUPESA SC 125 V industrial steam tumble dryers manufactured by TUPESA Maquinaria Textil, Spain. These industrial dryers are designed for continuous, high-capacity textile and garment drying, making them ideal for denim manufacturing, garment finishing, industrial laundries, and textile processing plants. Both units were previously installed in the MASI Jeans factory and formed part of a professional industrial laundry and finishing line. The machines are sold together as one lot. Unit K550 is operational. Unit K551 requires radiator replacement Technical Specifications • Manufacturer: TUPESA Maquinaria Textil • Model: SC 125 V • Machine Type: Industrial Steam-Heated Tilting Drum Tumble Dryer • Quantity: 2 Machines • Year of Manufacture: 2004 • Manufacturing Date: 17.12.2004 • Country of Manufacture: Spain • Power Supply: 380 V, 3-Phase, 50 Hz • Heating System: External Steam Supply • Variable Speed Drive: Danfoss VLT 2800 Inverter • Drum Type: Hydraulic Tilting Drum Machine Details Unit K550 • Internal Reference: K550 • Serial Number: 3881 • Operational Unit K551 • Internal Reference: K551 • Serial Number: 3690 • Requires inspection / suitable for spare parts or refurbishment Key Features • Two industrial steam-heated tumble dryers • Large-capacity tilting drum design • Hydraulic drum tilting for ergonomic loading and unloading • Steam-heated drying system • Danfoss variable-speed inverter drive • Industrial electrical control panel • Heavy-duty construction for continuous production • Designed for large-scale laundry and garment processing Includes • 2 × TUPESA SC 125 V tumble dryers • Danfoss inverter drives • Electrical control cabinets • Main drive motors • Steam connection valves • Exhaust fan assemblies • Industrial support frames Applications • Industrial laundry operations • Garment manufacturing • Denim production • Textile processing • Garment finishing • Commercial drying facilities • Heavy textile processing Condition • Sold as one lot consisting of two machines • One machine fully operational • Second machine requires approx.. 1000 euro radiator replacement. • Previously used in professional industrial production • Both machines are externally complete Iisdpfx Ajzkv R Dem Heg • Good overall industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling and lifting equipment are recommended due to the size and weight of the machines. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are available as this two-machine package or together with the complete industrial laundry and finishing line.

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, cooling capacity: 29 kW (39.43 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 45 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, temperature: 10 °C, volume flow: 4.5 m³/h, total width: 830 mm, total length: 1,240 mm, total height: 2,030 mm, noise level: 62 dB, empty load weight: 540 kg, input frequency: 50 Hz, Equipment: compressor, cooling unit, KKT cBoxX40 chiller, year of manufacture 2021, air-cooled cooling unit for frost-free indoor installation. Cooling capacity 29 kW (at water supply temperature 10 °C, ambient temperature 35 °C). Refrigerant R410A, compressor with energy-efficient scroll technology. Condenser in a compact design with high fin efficiency and low refrigerant charge. Speed-controlled fan with EC-Blue technology according to ErP 2015, corrosion-resistant Owlet blades. Electronic expansion valve with high control accuracy. Evaporator as a plate heat exchanger in an asymmetrical design. Water circuit: customer-specific piping with external connections, insulated stainless steel tank (1.4301) in an atmospherically open design, electronic level monitoring incl. low water/dry-run protection, temperature and pressure display in refrigerant supply and return, flow control for evaporator protection, multi-stage centrifugal pump. Control cabinet: design according to DIN EN 60204 Part 1 and VDE 0113 Part 1, controller with plain text display (multilingual, including German, English, French), main switch, motor protection switch, transformer for 24 V DC control circuit, status display, protection class IP54, collective fault/warning message with potential-free contact, potential-free remote control, short-cycling protection, limit value monitoring min./max. Technical data: flow rate 4.5 m³/h, free pump pressure 3.0 bar, air flow rate 9,350 m³/h, sound pressure level 62 dB(A), permissible ambient temperature +5 to +45 °C, tank volume 300 l, water connection Rp 1 1/2", operating voltage 400/3/50, dimensions (H×W×L) 2,030×830×1,240 mm, net weight 540 kg. Additionally included: insulation of the refrigerant lines and the pump inside the housing, overpressure valve for standby operation, level kit (supplied loose) for height differences >500 mm between chiller and consumer, leveling feet (supplied loose) for vibration decoupling and height compensation up to 5° floor slope. Complies with the Ecodesign Directive (EU) 2015/1095 and (EU) 2016/2281. Condition, history and handling: year of manufacture 2021, ordered 07/2021, delivery week 38/2021. The unit was operated in conjunction with a Sollich temperature control system, the production use of which amounted to approximately 180 operating hours; an operating hour counter is not available. Stored in Wuppertal since the end of 2024, inspection by appointment. Purchase value in 2021 according to offer: 9,800 € net. Sale from commercial to commercial, excluding warranty, technical data according to manufacturer's documents, errors and omissions excepted. This cooling unit is also available as part of a complete temperature control and mixing system (including Turbo temperature controller TE 1600 D and nut mixing unit NM 200 VA), see advertisement ID A22725782. Iiodpfxjzzvgao Am Heg

Condition: excellent (used), MECALSA Continuous Industrial Fryer with Thermal Oil – Stainless Steel MECALSA continuous industrial fryer with a thermal oil heating system, designed for the continuous frying of food products in medium and high-capacity production lines. The equipment features a longitudinal process tank and a transport system that allows the product to remain in the oil for a controlled residence time. Indirect heating via a thermal oil circuit provides the necessary energy to the process while keeping the thermal fluid separate from the frying oil. Its construction, primarily in stainless steel, along with vapor extraction and process control systems, makes it particularly suitable for professional installations in the food industry. Iisdpfszxwxxex Am Heg MAIN FEATURES -Manufacturer: MECALSA -Type: Continuous industrial fryer -Heating system: thermal oil -Continuous frying process -Longitudinal frying tank -Automatic product transport -Adjustable residence time depending on configuration -Circulation and control of frying oil -Independent thermal oil circuit -Indirect heat exchange -Temperature control -Piping and valve system -Vapor extraction system -Extraction hoods and ducts -Control electrical panel -Construction primarily in stainless steel -Industrial structure for continuous operation -Access points for inspection, cleaning, and maintenance -Integrable into automatic processing lines PROCESS The product is continuously fed into the MECALSA fryer and guided through the frying zone by the internal transport system. During this process, the product remains in contact with the frying oil at a controlled temperature for the time needed to achieve the required final characteristics of cooking, color, and texture. Heat is supplied through a thermal oil circuit, which transfers energy to the system without directly mixing with the oil used for frying the product. The vapors generated during frying are collected by the hoods and channeled to the extraction system. APPLICATIONS Especially suitable for manufacturers of pre-fried products, processed vegetables, potatoes, snacks, breaded products, and other food preparations that require a continuous frying process. Depending on the installed configuration, it can be used for: Potatoes and related products Vegetables Breaded or battered products Prepared meat products Fish and fish products Snacks Pre-cooked products Other specialties compatible with continuous frying It can be integrated with feeding systems, scalding units, dryers, conveyors, excess oil removal systems, coolers, IQF freezers, and packaging equipment. The combination of MECALSA technology, continuous process, and thermal oil heating provides an industrial solution for lines requiring uniform and controlled frying. Machine available for inspection. Additional technical information, production capacity, operating temperatures, dimensions, additional photographs, or videos can be provided upon request.

Condition: repair required (used), Year of construction: 2018, machine/vehicle number: 1713613, temperature: 650 °C, overall weight: 1,900 kg, EXW – Dismantling and loading must be arranged by the buyer! MACHINE DETAILS Voltage supply: 3/N/PE 400/230 V AC, 50 Hz Rated current: 125 A Rated heating current: 104 A Heating power: max. 72 kW Motor power: 3 kW Total power: 75 kW Dimensions & Weight External dimensions [mm]: 2,200 × 3,300 × 1,800 / 3,150 with lifting unit External dimensions with lifting unit: 3,150 mm Internal dimensions: 2,000 × 1,000 × 1,000 mm Weight: 1,900 kg Maximum temperature: 650 °C Protection class: IP40 Isdpfx Amezx S Eme Heig EQUIPMENT Operating manual CE/conformity documents Note: One burner row is defective. Electrical repair is required.

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Ejector stroke: 250 mm Iijdpfx Amezvmx Ns Hsg Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t

Year of construction: 1995, condition: used, Clamping force: 6500kN, locking force: 7150kN, max. opening stroke: 930mm, mold height: 360-920mm, max. distance between mold mounting platens: 1850mm, mold mounting platens: 1350x1350mm, clear tie-bar spacing: 900x900mm, max. mold weight: 8.6t, max. weight on moving mold mounting platen: 5.7t, screw diameter: 110mm, L/D ratio: 17.2, injection pressure: 1270bar, shot volume: 3570cm³, shot weight (PS): 3180g, max. metering stroke: 375mm, max. nozzle stroke: 850mm, nozzle immersion depth (SVO): 70mm, nozzle contact force: 200kN, installed barrel heating capacity: 52kW, hopper capacity: 110l, the machine screw is defective. With documentation. An on-site inspection is possible. Iedszzqcpjpfx Am Hjig

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 50,000 l, Heating oil tank – storage tank – diesel tank – tank system – steel tank brand new – with a capacity of 50,000 liters – according to EN 12285-2 – Class B – (replacement for DIN 6616), above ground, double-walled, including test certificate, suitable for installation in areas of seismic zone 0. The tank has two saddle supports, a manhole with a dome cover, and is equipped with the following fittings: 1 filling pipe with a TW closure (filling cap) and dip tube, 1 gauging pipe with a gauging rod and gauging rod closure, 1 vent pipe with a vent cap, 1 brand new limit switch with type approval (AIII), 1 ladder and 1 spare socket for withdrawal purposes, 1 optical leak detection device with type approval and leak detection fluid. The tank will be sandblasted, primed, and painted white externally / RAL 9016 color (sample photo). (Other RAL colors are also available on request!) L = approx. 10.70 m – D = 2.50 m – Weight approx. 9.5 tons – ex works, loaded free of charge – General: You will receive an invoice with VAT shown. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental systems are also available! Isdpfei A Hz Aex Am Hjig In addition, we purchase existing tank systems and can, with certified specialist company qualifications in accordance with the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and transport them away.

Year of construction: 2019, condition: excellent (used), Product Information "GRILLOMAX Model Grill Station" THE GRILLING, COOKING, AND BAKING TALENT Whether it's baked goods, vegan dishes, vegetarian food, fish, meat, or poultry. The Grill Station model grills, cooks, bakes, and broils your desired product to a perfectly crispy and juicy finish in no time. Up to 100 dishes* per hour can be prepared simultaneously in the grill and oven drawer, and all without adding any oil! Perfect, crispy, and juicy results with even browning ensure a unique taste experience and satisfied guests. ► I-Control function for perfect results ► 20 predefined grilling and cooking programs ► With integrated extractor hood Iedpfx Asghr Ngjm Hjig ► No oil or grease odors – fat-free preparation ► No specialized personnel / no monitoring of the cooking process required ► Low heat radiation from the outer shell ► Flexible location options – space-saving ► Easy operation and quick cleaning ► Low maintenance costs – quick return on investment ► 220 / 230 V connection ► Development and manufacturing "Made in Germany" ► Sustainable and environmentally friendly – lowest CO2 value in its class ► Customizable Technical data: Grill unit: Dimensions: 230 (H) x 235 (D) x 50 (W) mm x 2 compartments Oven unit: 235 mm x 60 mm Weight: 42 kg Installation dimensions: 690 (H) x 425 (W) x 585 (D) mm Power: Ø 1,611 watts (full operation), Ø 3,175 watts (heating phase) Connection: 220 / 230 V / 50 Hz RRP: €8,328 More photos available upon request. Thank you!

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000, Year of manufacture 2010 / Commissioned 2011, Siemens 840 D control system, Travel distances X 10,000 mm, Y 1,500 mm, Increased spindle carriage stroke: Z 1,000 mm, Iijdozua N Sepfx Am Heg Increased through-height 1,000 mm, Through-width 1,500 mm, Main drive 36 kW, n = 6,000 rpm, 720 Nm 2-stage gearbox 1:4 SK 50 tool holder Machining performance in C45: Full drilling D=120mm, threading M55, milling 100cm³/min Gantry design with movable portal bridge and stationary machine table. Machine table with clamping bars in the transverse direction, each with 750 mm spacing. The standard plate fields are omitted. Gantry-style machine Hydraulic clamping device with clamping bridges for machining shafts, including hydraulic system Angle drilling & milling head, n = 4,000 rpm, SK50 High accuracy and stability due to Hirth gearing Automatic tool change in the angle head Measuring probe RWP20.50-M Swinging operation Safety fence with light curtains, manufacturer Sick Machine table with clamping bars in the transverse direction, each 750 mm Tool chain magazine on the portal stand with 30 positions Machine coolant system Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, adjustable in height by motor Partition wall with viewing panel Chip conveyor with hinged belt design Installation and alignment elements

Condition: used, Year of construction: 1990, functionality: fully functional, overall weight: 9,700 kg, COGEIM E.O. 2000 VACUUM PADDLE DRYER – PHARMACEUTICAL DESIGN – 2,380 L High-quality horizontal vacuum paddle dryer from COGEIM, Italy, in a pharmaceutical design. The dryer features a horizontal, heated/cooled stainless steel container with a large front-opening lid, as well as a robust paddle agitator with scrapers. The parts in contact with the product are made of stainless steel 1.4435, and the inner surfaces are highly polished. The system is suitable for demanding drying, mixing, and vacuum processes in the pharmaceutical, chemical, and fine chemical industries. TECHNICAL DATA Manufacturer: COGEIM, Italy Type: E.O. 2000 Year of manufacture: 1990 Project/Job No.: C.89/040 Working/Nominal volume: approx. 2,380 liters Total container volume: approx. 3,100 liters Container: Operating pressure: -1 / +6 bar Operating temperature: -20 / +165 °C Iisdpor Nclajfx Am Hjg Product-contact material: Stainless steel 1.4435 Inner surfaces: Highly polished HEATING/COOLING SYSTEM The container can be heated or cooled via an external half-pipe coil. Volume of heating/cooling chamber: approx. 150 liters Operating pressure of heating/cooling chamber: up to +6 bar Material of heating/cooling chamber: Stainless steel 1.4306 Temperature range: -20 / +165 °C AGITATOR Robust horizontal paddle agitator with scrapers Large-area mixing of the product Agitator shaft seal via mechanical seal Laterally arranged gearbox/motor drive EQUIPMENT / SCOPE OF SUPPLY The existing scope of supply includes, among other things: - Filter for solids / dust filter - Feed device - Discharge valve - Rotary valve - Compensator - Drive and gearbox - Pneumatic fittings and components - Large front-opening lid - Support frame - Existing connection components - Existing technical documentation - Original installation/connection drawing The large front lid provides very good access to the interior and to the agitator for inspection, cleaning, and maintenance. CONDITION Used system in operational condition. The interior and the paddle agitator appear to be in very good condition in the available images. Technical documentation and original drawings are available. Further technical information, detailed photos, and excerpts from documentation can be provided upon request.

Condition: used, This listing is for a Sartorius Stedim Palletank Cubical Jacketed-Mix 200L Storage Tank. The unit is in full working condition and is ready for immediate release. Unit is supplied with x2 Sartorius 200L STD Plastic Palletank and dolly. The Sartorius Stedim Palletank Cubical Jacketed-Mix 200L is a high-performance storage and mixing solution designed for biopharmaceutical applications. Engineered for compatibility with Sartorius single-use mixing systems, this temperature-controlled stainless steel tank provides efficient liquid handling, precise temperature control, and optimized mixing performance. Key Features: - Jacketed Temperature Control – Ensures precise heating or cooling for sensitive bioprocess applications. - 200L Capacity – Ideal for medium-scale liquid storage and mixing in GMP environments. - Ergonomic Design – Front doors allow for easy bag installation and port gates facilitate tubing and sensor integration. - Integrated Pro Mixer Compatibility – Railed port enables quick coupling of the mobile Pro Mixer drive unit in under a minute. - Optimized Draining System – Sloped bottom board ensures high product recovery without manual bag manipulation. - Weighing Function Option – Allows for precise volume control, preventing aggregate formation and ensuring product quality. - Visual Inspection Windows – Side windows enable real-time process monitoring during mixing. - Surface Finish Options – Available in Bead Blast or ASME #4 brushed finish for enhanced corrosion resistance and cleanability. Specifications: Model: Palletank Cubical Jacketed-Mix 200L Capacity: 200 Liters Material: Stainless Steel Jacket Type: Temperature-Controlled Jacket Mixing Type: Integrated Pro Mixer Compatibility Drainage System Sloped Bottom for High Recovery Application Storage & Mixing for Bioprocessing Compliance GMP, Biopharma Standards Iodpfexxybvox Am Hjig Benefits: - Precise Temperature Control – Maintains optimal conditions for biologics and cell culture media. - Efficient Mixing – Designed for homogeneous blending of process liquids, buffers, and media. - Enhanced Process Control – Weighing and volume control prevent aggregate formation. - Easy Integration – Compatible with Sartorius Flexsafe® Bags & Biostat® Systems. - Ergonomic & User-Friendly – Front door access and port gates for seamless tubing and sensor installation. - Durable & Hygienic – Stainless steel GMP-compliant construction with highly cleanable surfaces. - Applications: - Biopharmaceutical Manufacturing - Cell Culture & Media Preparation - Buffer & Reagent Storage - Vaccine & Protein Processing

Condition: excellent (used), Year of construction: 2013, Haitian Mars II 7000/2950 Injection Moulding Machine Year of manufacture: 2013 Iiodpfxsw U Tyls Am Hjg The machine is equipped with an injection unit offering 7000 kN clamping force and a specific injection pressure of 1580 bar. It features a mixing screw with a diameter of 80 mm, allowing for a maximum stroke volume of 1860 cm³ and a maximum shot weight (for PS) of 1692.6 g. The screw rotation speed reaches up to 200 rpm, and the plasticizing capacity (for PS) is 76.8 g/s. The cylinder heating power is 38.35 kW. The clamping system enables mould installation with a mould height range from 400 to 940 mm and a clearance between tie bars of 940 × 960 mm. The opening stroke is 970 mm. Mould centring on the A.S. and D.S. sides is 200 / 200 mm. The ejector stroke stands at 260 mm (stroke) and 200 mm (passage). Equipment includes core drives: - on the moving platen – 2 units, - on the fixed platen – 2 units.

Condition: like new (used), JBT Industrial Finisher / Refiner – Stainless Steel JBT industrial finisher in stainless steel, designed for the continuous refining of pulps, purees, and food products, allowing the separation of the usable fraction from peels, seeds, coarse fibers, and other undesired solids. This type of equipment is typically used after crushing, extraction, or preheating operations to obtain a product with a finer and more homogeneous texture before subsequent stages of concentration, heat treatment, or packaging. The system operates using an internal rotor and a perforated sieve or screen, performing continuous mechanical separation between the refined product and solid waste. MAIN FEATURES -Manufacturer: JBT -Type: Industrial finisher / refiner -Application: refining and separation of pulps -Automatic and continuous processing Iedpfx Asyz Ttmom Hoig -Rotary refining system -Internal separation sieve / screen -Solid-liquid / pulp-waste separation -Continuous product feed -Independent product and waste discharge -Construction primarily in stainless steel -Driven by an electric motor -Closed processing chamber -Robust design for industrial operation -Access for cleaning and maintenance -Integrable into continuous processing lines PROCESS The product, previously crushed or processed, enters the JBT finisher continuously. Inside, the rotor drives the product against a perforated refining surface. The pulp, puree, or liquid fraction that meets the required size passes through the screen, while larger particles remain retained and are conveyed to a separate discharge. This process allows operations such as: Refining of pulps and purees Separation of peels and seeds Removal of coarse fibers Reduction of undesired solids Homogenization of the texture Preparation of product before concentration Pre-treatment prior to aseptic sterilization APPLICATIONS Especially suitable for tomato industries, fruit and vegetable processors, juice, pulp, puree, concentrate, and sauce manufacturers. Depending on the screen and configuration installed, it can be used for tomatoes, fruits, and various vegetable products, forming part of industrial extraction and refining lines. It can be integrated with crushers, preheaters, pumps, evaporators, aseptic sterilizers, and fillers. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Iedpfx Amjwb E S Io Hjig

Condition: used, -CLIREF Chilled Water Unit -Type: DRLBY64 -Serial No.: 3663 -Number of compressors: 2 -Type: Semi-hermetic -Power: 70 kW -Voltage: 380 V -Frequency: 50 Hz -Year: 1984 -With 1 forced-air condenser -Brand: Copeland Iedpfxsw Dvcpj Am Heig -Type: D6DA3500A -COPELAND SEMI-HERMETIC COMPRESSOR D6SH-3500 -Serial number: 2010J4262 -Type: Semi-hermetic piston -Number of cylinders: 6 Are you looking for an efficient cooling system? Have you considered installing a chilled water unit? We offer you an overview of this cooling production system, which is more economical and environmentally friendly than conventional air conditioners and other industrial process cooling systems. A chilled water unit (also called a chiller) is an indirect expansion cooling system. This means it uses an intermediate fluid to transfer “cold” to the emitters. There is no refrigerant circulating through the system: in the case of a chilled water unit, water (pure or glycolated) serves as the intermediary fluid, used here as the heat transfer fluid. This cooling solution is suitable for both industrial process cooling and residential air conditioning applications. Relevant specifications: -Displacement [m³/h]: 106 -Locked rotor current [A]: 304 Iiedcusw Dvcps T Rxiei -Max. operating current [A]: 63.3 -Weight [kg]: 240 -Oil charge: 4.3 dm³ -Power supply: 400V/3Ph/50Hz -Quantity: 02

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Ijdoyfgrpepfx Am Hjig Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: excellent (used), Year of construction: 1994, Clamping unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of stages: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2 x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Iijdpfx Aoz Dihgom Hjg Retraction force: approx. 2 x 47 kN Piston 2 diameter: 60/40 mm Weight, approx.: 16 t Hydraulics: Pressure setting: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 at 300 bar Drive power: 22 kW Tank dimensions (L x W x H): 1,000 x 770 x 535 mm Closing speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing stroke: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ijdpfx Aew U Sz Iom Hjig Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: used, Year of construction: 2017, Overview Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump Iiedpozxnu Djfx Am Hjg - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Semi-Automatic Tube Filling & Sealing Machine Compact and high-quality tube filling and sealing machine from AXOMATIC, Italy. The machine was previously used for filling and sealing plastic tubes and is equipped with a hot-air sealing system, volumetric piston dosing system, heated product hopper, and agitator. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Ijdpfx Amjzyu R Uj Hsig Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Semi-automatic tube filling and sealing machine - Rotary indexing table with 7 tube stations / holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling nozzle - Hot-air system for tube sealing - Temperature control for hot air - Heated stainless steel product hopper - Separate temperature control for hopper heating - Product agitator - Automatic / continuous dosing modes - Automatic tube discharge - Stainless steel machine construction - Transparent safety guarding - Emergency stop and safety controls - Various format and spare parts available - Documentation available ELECTRICAL / UTILITY DATA Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Approximate air consumption: approx. 150 l/min Max. water pressure: 3 bar Approximate water consumption: approx. 2–3 l/min Noise level: < 75 dB Net weight: approx. 300 kg APPLICATION Suitable for filling and sealing plastic tubes. The machine is particularly well-suited for creams, gels, ointments, pastes, and other liquid to viscous products, depending on the product and the installed dosing configuration. CONDITION Used machine in good and complete visual condition. The machine is currently in storage and has not yet been function-tested by us. We are planning to prepare and set up the machine for a functional test and demonstration. Once completed, a functional test and machine video can be provided. The machine can be inspected by appointment. Several machine-specific format and spare parts are included / available. The exact scope will be documented before delivery. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components and are currently being verified. Further technical information, detailed photographs, and documentation are available upon request. Price: EUR 22,500 net negotiable, EXW Switzerland

Condition: used, machine/vehicle number: PST37, Used pasteurizer for tomato juice 400 CPMTechnical Specifications & Performance DataThis BOND four-module tunnel pasteurizer-cooler is designed for the thermal treatment and controlled cooling of tomato juice containers. Built primarily in stainless steel, the machine combines pasteurization and cooling stages on a continuous Intralox plastic mesh conveyor, providing a robust solution for industrial packaging and beverage production applications requiring extended thermal processing.Maximum production speed: For tomato juice 400 containers per minute (24.000 unit per hour) for beer 600 container per minut (36.000 unit per hour).Alternative operating condition: 300 containers per minute ( overhauled, in excellent condition )Thermal length: 27,400 mmUsable width: 3,200 mmUseful processing area: 80 m²Total internal capacity: 22,000 piecesProduct weight used for the thermal calculation: 450 gContainer format indicated: 2.0LAdvanced Automation & Control SystemsThe pasteurizer is supplied with an electrical control panel for management of the thermal treatment and conveyor process. Water tanks, recirculation pumps, heat-exchange equipment and the continuous conveyor are integrated into a coordinated operating system. The design includes recirculating-water circuits serving the pasteurization and cooling sections.Thermal performance data indicate pasteurization water at 95°C, with a cooling-tower temperature difference of 10°C. The documented recirculating-water volume is 80 m³/h, with additional pump references of 65 m³/h and 165 m³/h.Production Line Integration CapabilitiesThis tunnel pasteurizer is suitable for installation in a used bottling line or industrial packaging line where filled containers require pasteurization before downstream handling, labeling or secondary packaging. Its continuous mesh conveyor configuration supports inline product flow between upstream filling equipment and downstream cooling, inspection or packaging machinery.The machine was originally engineered for tomato juice, a product requiring longer pasteurization times and higher pasteurization temperatures than beer. The system can therefore be evaluated for beverage production and food-processing applications with comparable thermal-treatment requirements. The cooling section includes a 20 m² buffer conveyor to support controlled product discharge and line balancing.Machine Condition & Maintenance HistoryPresented as like new and fully operational, the machine is complete with the accessories required for operation. The all-stainless-steel construction supports durability and hygiene in demanding production environments, while the Intralox mesh belt provides continuous container transport through the thermal and cooling zones.Operational Performance & VersatilityAt 400 containers per minute, the maximum documented thermal cycle lasts 55 minutes. Pasteurization represents 25% of the cycle, with 14 minutes at 95°C water temperature, followed by 41 minutes of cooling using cooling-tower water. At 300 containers per minute, a revised 60-minute cycle is indic... Iedpfezvl S Iex Am Hjig

Condition: excellent (used), Year of construction: 2011, We offer a used GEA-CFS TwinGrill TWG 1800/600 — an industrial machine designed for continuous grilling, toasting, and thermal processing of a wide range of food products. The machine is ideal for meat, poultry, and fish processing plants, as well as facilities producing convenience foods, ready-to-eat meals, and semi-finished products that require consistent and controlled heat treatment. The GEA-CFS TwinGrill TWG 1800/600 model is designed as a continuous grilling line made of stainless steel. The unit utilizes a dual grilling system with independently adjustable upper and lower heating zones. The temperature of the upper and lower grills can be adjusted separately, allowing for precise adaptation of the process to the type of product, its thickness, texture, and the desired final result. The machine allows products to be grilled on both sides, ensuring uniform cooking results, an attractive surface appearance, and consistent quality across successive production batches. A temperature range of 50 to 260°C and an adjustable belt speed ranging from 0.3 to 3 m/min allow the grilling time to be tailored to various food products. The TwinGrill is equipped with an intuitive control panel and a user-friendly interface that simplifies operation, process monitoring, and the setting of operating parameters. The ability to create and adjust processing programs allows for better control over the cooking and grilling process, as well as increased production consistency. Thanks to its hygienic design, high-quality stainless steel construction, and belt-cleaning system, the unit is easy to clean and suitable for use in the food industry. Additional features, such as removable grill plates and grease collection systems, facilitate routine maintenance and keep the unit clean. The GEA-CFS TwinGrill TWG 1800/600 is a versatile solution for grilling meat, poultry, fish, vegetables, formed products, burgers, cutlets, and ready-to-eat convenience foods. The machine can operate as a standalone unit or as part of a larger production line, e.g., following forming, marinating, breading, or preliminary processing of the product. Technical specifications: Manufacturer: GEA CFS Bakel B.V. Model: TWG 1800/600 Type: TwinGrill / industrial double-sided grill Machine number: 662 Year of manufacture: 2011 Net working length: 1800 mm Conveyor belt width: 600 mm Power supply: 400 V Phases: 3 Ph Frequency: 50 Hz Installed power: 97 kW Heating power: 93 kW Temperature range: 50–260°C Belt speed / grilling time: 0.3–3 m/min Belt cleaning system: included Construction: stainless steel Weight: approx. 2250 kg Applications: grilling burgers Iedpfjzicutsx Am Heig grilling cutlets and formed products processing poultry fillets production of grilled meat products processing fish products grilling vegetables production of ready-to-eat meals production of convenience foods Lines for grilled, roasted, and cooked products Meat, poultry, and fish processing plants Large-scale food service and catering production