Used Heater for sale (7,036)

Year of construction: 2021, operating hours: 17,634 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lift Mast Mast type: Duplex mast Lift height: 5,495 mm Free-lift mast: Without center hydraulic cylinder Free lift: No Load Capacity and Forks Load capacity: 3,500 kg Fork length: 1,200 mm Hydraulically adjustable forks: Yes Side shifter: Yes Drive Drive type: LPG (liquefied petroleum gas) Diesel drive: No MACHINE DETAILS Machine data Manufacturer: Linde Type: H35T Year of manufacture: 2021 Operating hours: 17,634 h Self-weight: 5,516 kg UVV certificate valid until: Formerly a Linde full-service unit Facelift model Dimensions Overall length: 5,200 mm Overall width: 1,450 mm Overall height: 3,424 mm EQUIPMENT 3rd and 4th hydraulic valve Fork positioner with side shifter Full cabin Air conditioning Guodsz R Dqwspfx Afrsh Heater Windshield wiper Comfort seat with lumbar support Seat heating LED work light, front LED work light, rear Road traffic lighting with turn signals Orange warning light Safety light, front Safety light, rear All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 45

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 1 x Marden Edwards Limited semi-automatic shrink wrapper and heat tunnel. Supplied with new belt. Manufacturer: Marden Edwards Limited Shrink wrapper: Model - ES 60. Serial number - W3710. Heat tunnel: Model - M25-40T. Serial number - W3708. Date of manufacture - 2012. Tunnel aperture dimensions - 515mm wide x 410mm high. Film roller - 595mm long. Sealing bar - 640mm long. Cutting knife - 620mm long. Height between sealing bar and rollers at maximum height - 345mm high. Electrical requirements - 230 V / 50 hz / 1 phase. Guedpfx Aozwxv Nsfreh

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Guedsz Ru Eropfx Afroh Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Gjdpfxozc Hkyj Afreuh

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heaters were acquired as part of a machinery takeover from VW/Dieffenbacher and are no longer needed. They are assumed to have very few operating hours (previous use in a laboratory). Godox An Eqjpfx Afreuh Price per unit = €9,000, price for the entire package = €30,000.

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, total width: 800 mm, total length: 1,000 mm, total height: 500 mm, 2026 Weishaupt WM-G10/3-A ZM Monarch Industrial Gas Burner – 100–1,000 kW – Only 3 Months' Use – Complete Controls & Gas Train. Gusdpez Iucwefx Afrjh Manufactured 2026 and used for approximately three months as a temporary winter heating solution at a commercial facility. Removed from service following the site's transition to an electrified heat-pump heating system. Burner was operational prior to removal. Complete with associated Weishaupt controls and gas train/components as pictured. Original purchase/parts receipts available.

Condition: used, functionality: limited functionality, Year of construction: 2018, operating hours: 16,914 h, load capacity: 4,000 kg, lifting height: 4,040 mm, fuel type: gas, mast type: duplex, construction height: 2,855 mm, empty load weight: 6,300 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,040 mm Load capacity: 4,000 kg Load center: 450 mm Fork width: 150 mm Fork thickness: 50 mm Fork length: 950 mm Fork carriage width: 1,350 mm MACHINE DETAILS Mast type: Duplex Drive type: Internal combustion engine Power: 42 kW Speed class: 15 ISO class: ISO class 3 = 2,500–4,999 kg Front tires Tire type: Non-marking Outer diameter: 450 mm Tire width: 200 mm Tire condition: 0–20 % Rear tires Tire type: Non-marking Outer diameter: 680 mm Tire width: 255 mm Tire condition: 0–20 % Gujdpfx Afez Hvmneroh Battery voltage: 12 V Battery type: Starter Battery year of manufacture: 2018 Unladen weight: 6,300 kg Overall length: 2,190 mm Overall width: 2,050 mm Operating hours: 16,914 h EQUIPMENT 3rd valve Rear work light Front work light Heater Full cab Air conditioning CE certificate Non-marking tires Seat heating 3-wheel design Seat Two-way catalytic converter 55-liter gas tank with indicator Blue Spot Large alternator, 90 A Air-suspended seat Footwell heater Note: The rear wheel motor is leaking.

Condition: new, Year of construction: 2026, functionality: fully functional, Our honeycomb heater plates are manufactured and assembled to Clako’s own unique design. 1 Zone, 2 Zone + 4 Zone Heater Plates are manufactured by our own engineer to fit your Cylinder, Platen, Saroglia and Clamshell machines. Strong, durable & available in high grade hardened steel or lightweight toughened aluminium to suits your needs. All of our honeycomb plates are machined to true flatness. Dies (cliches) secure to our plates using low height toggles. Gjdeyznu Sjpfx Afrouh Contact our team for details and price.

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, operating hours: 7,594 h, load capacity: 2,500 kg, lifting height: 4,950 mm, fuel type: diesel, mast type: simplex, motor manufacturer: Isuzu, fork length: 1,150 mm, tire condition: 85 %, overall weight: 6,744 kg, empty load weight: 4,244 kg, color: yellow, tire size: 7.00 x12, 6.00 x 9, Equipment: adjustable boom, cabin, front guard, head guard, hydraulics, lighting, For sale, a forklift: - Hyster H2.50XMX, diesel engine, Isuzu, manufactured in 1997. - Load capacity: 2.5 tons. - Side shift. - Cabin heater. - Full lighting system. - Overall condition: very good. Gsdsz R Uvlepfx Afreuh - Technical condition: very good. - Visual condition: very good.

Condition: excellent (used), Year of construction: 2005, Welcome. We offer the following: Temperature regulator – thermostat for injection molds – model HB THERM 160 U1 – series 4 Technical data: Manufacturer: HB - THERM Type: HB - 160U1 Year of manufacture: 2005 Medium: Water Temperature: 160° C Godpez Sk Dzsfx Afrouh Heater power: 8 kW

Operating hours: 13,483 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,600 kg Mast Mast type: Triplex mast with full free lift Lifting height: 5,255 mm Forks Fork length: 1,200 mm Fork positioner: hydraulic Side shifter: included Hydraulics Additional hydraulics: 3rd and 4th valve Drive and battery Drive type: Electric Battery voltage: 48 V Battery capacity: 500 Ah Battery manufacturer: Hawker Battery date: 05/26/2026 (?) Battery resting voltage: 50.1 V MACHINE DETAILS Manufacturer: Linde Gedpez R Dw Refx Afrjuh Type: E16-02 EVO Year of manufacture: 2017 Operating hours: 13,483 h Own weight: 3,400 kg Overall length: 3,200 mm Overall width: 1,150 mm Overall height: 2,321 mm Service valid until: 06/2027 UVV (Industrial Safety Regulations) valid until: 05/2027 (?) EQUIPMENT Full cabin Heater Windshield wiper Facelift model with tilt angle indicator LED work light front LED work light rear Safety light rear Comfort seat with lumbar support Seat heating Previously a Linde full-service unit All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not completed on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 154

Condition: excellent (used), Year of construction: 2015, input voltage: 400 V, input current: 70 A, input frequency: 50 Hz, type of input current: three-phase, For sale: an industrial induction melting and holding unit, model IH-40-HNK, manufactured by INDUCTOR Kft. The unit was manufactured in 2015 and features a water-cooled, medium-frequency induction system. Technical Specifications Manufacturer: INDUCTOR Kft. Model: IH-40-HNK Year of manufacture: 2015 Power output: 40 kW Supply voltage: 3 × 400 V / 50 Hz Guodpfx Afszy Ng Roroh Rated current draw: 70 A Water-cooled inductor Stainless steel, insulated melting vessel Estimated vessel capacity: approx. 200 liters Modern medium-frequency IGBT power electronics PLC/HMI control system Control cabinet weight: 190 kg Applications Aluminum melting Aluminum holding Foundry operations Metal processing plants

Condition: used, Year of construction: 2020, Nominal output: 29.8 kW Air flow rate: 2400 m³/h Gusdpfx Aez A Eapjfreh Combustion chamber depth: 580 mm Loading door: 330 mm x 330 mm Heatable volume: approx. 600 m³ Heatable area: approx. 120 m² Space requirement: approx. 600 mm x 800 mm x 1900 mm Weight: 230 kg Flue pipe diameter: 160 mm Warm air outlet nozzle: 2 x 200 mm Operating modes: Automatic and manual Chimney diameter (approximate): 200 mm

Condition: excellent (used), functionality: fully functional, Electric water heater Maximum power - 18kW Godpfx Afsvbfvherjuh

Condition: used, This listing is for a Grant QBD1 Digital Dry Block Heater. (1 of 2 available) The unit is in full working condition and is ready for immediate release. The Grant QBD1 is a versatile laboratory dry block heater with digital temperature control and capacity for one removable, interchangeable heating block. It provides an ambient +5°C to 130°C temperature range, with ±0.1°C stability and uniformity. Dimensions are approximately 200 x 240 x 120 mm and weight is 2.2 kg. Heating blocks are interchangeable and purchased separately Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: Gedpfx Aoxv Dvlofrsuh This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the mos

Condition: used, Year of construction: 2023, Milk E-Heating System PHE Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump. Make: DMUK Capacity: 1000-1000 L/h Temperatures: Regulated by the controls Circulation Pump: Included Control Panel: Included Gsdpfjy E H Eqox Afrsuh VDF: Included Condition: Excellent

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater, 54.74 kW, Heating Capacity 5830 m³/h UDSA Gas-Fired Warm Air Heater – Efficient, even at peak loads The most well-known product from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install unit is available in 14 sizes, ranging from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room itself. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, including the gas and exhaust connections, must only be carried out by an approved installation company. The gas-fired warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch - Ventilation, controlled via ECOtronic TN - L, with day-night-week program - Exhaust discharge via the roof, version B or C - Exhaust discharge through the outer wall, version C Gas-fired warm air heater type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Guedswb A Hispfx Afroh Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Connection voltage: 230V 1N, 50Hz Air volume flow: 5830 m³/h Protection class: IP20 Pin No. 0461BN0677 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, heating capacity: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Guodpeznca Hofx Afrsh Output 350 kW Year of manufacture 2010 with feed with ash discharge with control

Condition: good (used), Kroll M 150 Mobile Hot Air Generator Application areas: Heating of halls, tents, and construction sites Frost protection in horticultural businesses or warehouses of all kinds Rapid drying of new buildings Supplementary heating in the cold season Fuel: Heating oil EL Rated heat output: 135 kW Rated heat input: 150 kW Oil flow rate: 12.7 kg/h Air volume flow: 7,300 m³/h Electrical connection: 220 V / 6.1 A Power consumption: 1.38 kW Protection class: IP 44 Dimensions: Length: 2600 mm Width: 900 mm Height: 1300 mm Gedpfx Ajxwkw Esfrouh Weight: 270 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Operating hours: 4,375 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 4,625 mm Free lift: Full free lift Mast: Triplex mast Fork length: 1,200 mm Number of wheels: 3 Operating hours: 4,375 h Guedpsz R Dwwofx Afroh MACHINE DETAILS Manufacturer: Linde Type: E16 Year of manufacture: 2020 Drive type: Electric Own weight: 3,500 kg Overall length: 3,200 mm Overall width: 1,100 mm Overall height: 2,121 mm Battery year of manufacture: Battery voltage: 48 V Battery capacity: 625 Ah Battery voltage at rest: 50.8 V Battery charger: Not available EQUIPMENT Side shifter 3rd hydraulic valve Full cabin Cabin heater Windshield wiper LED work light, front LED work light, rear Tilt angle display Service valid until: 12/2026 Safety inspection valid until: 12/2026 All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of non-compliance with the collection deadline, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 124

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak loads. The most well-known device from REZNOR is the UDSA gas-fired warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install unit is available in 14 power sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and innovative. With this generation of devices, halls can be heated in a particularly economical way directly – without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-fired warm air heater. The advantages: Efficiency of over 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air deflection vanes Modulation of the heating output up to 50% EC technology Guedpfx Afox Ihiiorsh ErP Ready These devices are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, as well as the gas and exhaust connections, must only be carried out by an approved installation company. These gas-fired warm air heaters are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day/night/week program - Exhaust gas extraction via roof, version B or C * - Exhaust gas extraction through the outer wall, version C * Gas-fired warm air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat input (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air flow rate: 1360 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2016, condition: used, functionality: fully functional, Miltenyi Biotec GentleMACS Octo Dissociator with heaters. The gentleMACS Octo Dissociator with Heaters is a benchtop instrument for the fully automated and standardized tissue dissociation or homogenization of up to eight samples. Equipped with eight individual heating units and numerous optimized and ready-to-use gentleMACS Programs the gentleMACS Octo Dissociator with Heaters offers a fully automated workflow for tissue dissociation. In addition the instrument allows the user to create user-defined programs for almost any biological material. All eight positions can be operated independently. Single-cell suspensions or thorough homogenates are easily and reproducibly obtained using the unique C Tubes or M Tubes. These single-use gentleMACS Tubes allow sample preparation in a closed and sterile system, providing a high level of user safety and minimize cross-contamination. Applications The gentleMACS Octo Dissociator with Heaters is equipped with several programs for fully automated tissue dissociation into single-cell suspensions, including: Guedpfx Afst E Hncjrsh - mouse or human tumor - mouse or rat neonatal heart - neural tissue - mouse spleen, lung, lamina propria, epidermis, or liver - mouse or rat skeletal muscle - and more Additionally, user-defined programs can be used to create fully automated workflows for all other tissue types. Good working condition. Please check out our other listings as well.

Operating hours: 14,081 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast Mast type: Duplex mast Lifting height: 4,450 mm Fork length: 2,000 mm Side shifter: present 3rd hydraulic valve: present 4th additional valve: present, free for fork positioner Free-lift mast: without central hydraulic cylinder Tilt angle indicator: present Drive and Performance Drive type: LPG Load capacity: 3,500 kg Guedpoz R Dzpofx Afroh Operating hours: 14,081 h Inspection and Maintenance UVV valid until: 05/2027 Next service due in: 420 h MACHINE DETAILS General Manufacturer: Linde Type: H35T EVO Year of manufacture: 2019 Own weight: 5,030 kg Dimensions Overall length: 4,800 mm Overall width: 1,350 mm Overall height: 2,964 mm EQUIPMENT Full cabin with heater and windshield wiper LED work light front LED work light rear Safety Light rear Safety Light side Comfort seat with lumbar support Seat heating All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 189

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak performance The most well-known unit from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, that is, without central heating – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are direct-fired gas warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas warm air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. Gusdpfx Afox Ihg Isreh These gas warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation with 1 stage or 2 stages* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas warm air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Maximum nominal heat input (Hs) QN: 30.08 kW Maximum nominal heat input (Hi) QN: 27.75 kW Maximum nominal heat output: 25.53 kW Minimum nominal heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), ApenGroup LRP28DE Gas-fired hot air generator Gas type: G20 natural gas Connection pressure: 20 mbar Rated heat input QN: 27 kW Guodpfx Asx Ihlkjfreh Rated heat output: 24.63 kW Connection voltage: 230V 1N, 50Hz Airflow rate: 2700 m3/h Protection class: IP20 You can find more new and used items in our shop! International shipping costs available upon request!