Used Heating Plate for sale (27,589)

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Isdpjwypp Iofx Adnea Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Isdpfx Adeupy S Nenja Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Heavy hydraulic press Iodpfx Adeu R U Szsnsa

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, controller model: FSCUT4000E, laser type: fiber laser, laser source manufacturer: RAYCUS, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 5 mm, pipe length (max.): 12 mm, table length: 5,028 mm, working length: 3,000 mm, working width: 1,500 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, repeat accuracy: 0.02 mm, workpiece weight (max.): 2,500 kg, power: 6 kW (8.16 HP), input voltage: 380 V, input current: 16 A, type of input current: three-phase, type of cooling: water, overall weight: 3,000 kg, total length: 4,675 mm, total width: 2,385 mm, total height: 1,475 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, nozzle changer, safety light barrier, NEW LASER HEAD BOCI BLT-421 E Laser Head with Automatic Focus Automatic Nozzle Control - Touch Pad Safety (NEW) Full Cover with exchange table Danmar Machines BV Work table: 3,000 x 1,500 mm BOCHU 2D Laser Head BLT421 BOCHU FSCut4000 E Controller Raycus laser source 6000 CypCut E laser software with nesting function EQUIPMENT: * Application: Metal * Fiber Laser Isdpfjwr Dmfex Adnsa * FSCUT4000E CNC control * Working area: 3,000 x 1,500 mm * Processes: Sheet material * Laser source: RAYCUS with 100,000-hour lifespan * User-friendly operation with BOCHU SMART function * CYPCUT software + CYPNest - Nesting, simulation, calculation of processing time and costs, standard macro - Import: PLT, BMP, DST, DWG, DXF, DXP, STEP, etc. * 120 m/min cutting speed * Servo motors on all axes * HiWin linear rails * Laser Head BOCHU BLT4 series * S&A Water Chiller * Real-time air and gas pressure monitoring * Touchscreen interface * Windows Teamviewer online helpdesk * Model EXP3015GA * Laser Power: 6000W * Working area: 3,000 x 1,500 mm * Repeatability accuracy: 0.02 mm * Maximum speed: 120 m/min * Maximum acceleration: 1.5G * Remote control * Automatic lubrication * Warranty: 2 years, maximum 3,000 operating hours* METAL CUTTING MACHINES High-quality, advanced CNC laser cutting machines Sheet material up to 25 mm thick, depending on the laser source Danmar Machines BV, Almelo - Technicians with over 20 years of experience - Service locations in the Netherlands & Belgium - 24/7 online cloud service - Machine network connectivity 24/7 for continuous monitoring (optional) Support & Service Danmar Machines BV, Almelo and BOCHU INDUSTRIAL aim for bespoke service Fast response > short lines of communication > clear communication SOFTWARE: Drawing Modification and Import Intelligent part recognition, identification and optimization of drawing errors. Supports file formats such as DWG and DXF. Batch creation and component import via Excel table supported. CADCAM: CypNest is a nesting software designed for the CypCut/HypCut laser cutting system. It integrates advanced features like drawing adaptation, fast nesting, toolpath generation, analysis reports, and more to suit your production needs. Contact us without obligation for more information. Please mention your company name and telephone number.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Iodpfswk Rlxsx Adnoa Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: not inspected (used), functionality: unexamined, overall weight: 150 kg, total length: 640 mm, total width: 640 mm, total height: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to the liquidation of a business. Submitting a bid binds you to timely collection between 26/01/2026 and 29/01/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 640 mm x 640 mm x 1,500 mm Weight: 150 kg EQUIPMENT Height gauge Vice with 100 mm jaw width Isdpexqqlcefx Adnoa

Condition: used, Cast iron bed Length: 3300 mm Width: 2000 mm Thickness: 240 mm Isdpoxn Invjfx Adnsa 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 20 leveling feet Weight: approx 5,5 T

Condition: used, surface 4000x1500x270mm, weight 3500kg, 2 plates Isdpfxsxnwnre Adnsa

Condition: used, Year of construction: 1997, functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system - Year of release: 1997 - manufacturer: Komforts - Power 1 mW. Isdpov D Uz Esfx Adnoa - moving floor supply system with hydraulic station, - chimney, - pumps, - control, - hot water accumulator.

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm Iodjw Hhwwspfx Adnsa • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: good (used), Cast iron bed - Floor Plate Isdjh Auahepfx Adnsa Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: used, Cast iron bed Length: 3300 mm Width: 2000 mm Isdpfsww H Ntox Adnsa Thickness: 240 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 20 leveling feet Weight: approx 5,5 T

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Thickness: 300 mm Height on feet: 930 mm Iedpsig Hu Njfx Adnsa Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Ijdpewtc Hgefx Adnsa Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm Iedpfewnfz Njx Adnea 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Isdpfx Adewlhfljnoa Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Ijdpfx Aewlhd Usdnoa Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), 110 CM X 90 CM X 90 CM Plate Used in tos machine Isdpfx Adjurv E Dsnea

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, working width: 4,050 mm, cutting angle (min.): 2 °, cutting angle (max.): 10 °, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Sheet width: 4,050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Electric back gauge: 1,000 mm Iodpfx Aoxxr H Rsdnja MACHINE DETAILS Machine weight: approx. 10,100 kg EQUIPMENT Support arms for material Sheet lifting device Scrap container Cutting gap and angle adjustment via the control system

Condition: used, Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: Ijdpjxabvqjfx Adnea - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results thanks to up to 32 storable programs. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". As space-saving as a pallet wrapper with a horseshoe plate and as robust as a closed system system - these are the advantages of this machine in a nutshell! With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. The programs also allow you to set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 500 kg, this model is designed for loads of up to 1200 kg. Our Profiline LP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. This model is our recommendation if you have limited space but require a professional & robust pallet wrapper that can be optimally adapted to your needs. adaptable to your needs Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Ijdpfx Adjxz A Sisnoa Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: excellent (used), Sheet rack, in very good condition, sturdy design, rollers at the front, bolted construction, dimensions 5000 x 2900 x 2600 mm, for self-dismantling. Ijdsxz A Drspfx Adnsa

Condition: ready for operation (used), Year of construction: 2002, sheet width 3230 mm Iedexaaq Hspfx Adnja plate thickness 3.00 mm thickness at "Niro-steel" 1.75 mm no. of strokes 34 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control POS 100 air pressure 6.0 bar engine output 6.8 kW weight of the machine ca. 3510 kg range L-W-H 4070 x 2070 x 1400 mm Current new price including accessories approx. 70.000 Euro From a maintenance workshop Very good condition (!!) Special price upon request Features: - Robust / motorized swing cut guillotine shear - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * With SCHRÖDER NC POS 100 control unit * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Coarse adjustment via pushbuttons * Limit value protection with limit switches - "Duo-Cut" drive with two dynamic, powerful gear motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel blade - 1x side stop with T-slot and digital mm scale - 2x extended sheet support arms - Selector switch for single and Continuous stroke - 1x freely movable foot switch - Rear safety device (side guards) - Original operating instructions Optional accessories included: - Pneumatically controlled sheet support device for thin sheet blanks * Sheet removal / sheet slide to the front (operator side)

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: This pallet wrapper is an absolutely new exhibit, which was only in our showroom for a few months. This machine comes with a 12-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results thanks to up to 32 storable programs. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". As space-saving as a pallet wrapper with a horseshoe plate and as robust as a closed system system - these are the advantages of this machine in a nutshell! With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual Iedpfx Aexz A Scednsa steps (foot winding, winding up / head winding / winding down) in the programs. programs. The programs also allow you to set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 500 kg, this model is designed for loads of up to 1200 kg. Our Profiline LP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. This model is our recommendation if you have limited space but require a professional & robust pallet wrapper that can be optimally adapted to your needs. adaptable to your needs Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: excellent (used), Panel rack, very good condition, sturdy construction, rollers at the front, bolted, dimensions 5000 x 2900 x 2600 mm, for self-dismantling. Ijdpexz Azqofx Adnsa