Used Heating Installation for sale (19,548)

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Hjdpfjupy S Nox Ahvoni On Stock Emskirchen / Nürnberg - Can be test

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall Hnjdpsk S Dt Tefx Ahvji - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, Equipment: documentation/manual, Hydraulic press – versatile use as an assembly press, small batch press, manual loading press, vulcanizing press, or heating press, designed as a double-column press (H-frame construction). Inspection of the press is possible at the warehouse in Ennepetal. This is a 2.5-year-old, unused press with zero operating hours, being sold with full warranty. Technical details: - Robust machine frame - Capacity: 30 tons at 300 bar - Pump ASC: 28.5 liters/min. - Motor: 11 kW – 15 hp - Oil tank: 600 × 450 × 500 mm – approx. 100 liters - Cylinder piston: Ø 110 mm - Cylinder bore: Ø 70 mm - Stroke: 500 mm - Speed, forward: 45 mm/s - Return: 55 mm/s - Guide rods: Ø 50 mm - Table plate: 800 × 550 mm – with T-slots - Ram plate: 700 × 500 mm – with T-slots - Total weight: 2,000 kg - BoschRexroth valves - Control cabinet technology from renowned manufacturers - Press table size: 700 × 500 × 70 mm - Table height: 800 mm, measured from shop floor - Cylinder dimensions / piston rod: 110 / 75 mm - Ram size: 700 × 500 × 80 mm - Emergency stop switch - Rear protective enclosure made from painted mesh - Press area lighting - Rear and sides fully enclosed - 500 mm high light curtain with 14 mm resolution (finger protection) - Maximum distance between table and ram: 500 mm - Cylinder travel: 500 mm - Front open width: 820 mm - Pressing force adjustable by rotary knob from 5 to 30 T - Travel speed: downwards 50 mm/sec, upwards 40 mm/sec - Total weight approx. 2,000 kg - Finish in RAL 7035 (light grey) and RAL 2009 (orange) - Assembly, commissioning, and operator training available for an additional charge - CE declaration and German-language documentation - Ram plate guided by two pillars - Resettable piece counter - Position limit via cam switch - Adjustable two-hand control with 3 m cable - Safety inspection with certificate from an authorized specialist company - The right side features movable sensors for stroke limitation. This allows a specific stroke, e.g., 300 mm, to be set. The press will then automatically move to the preset point at the push of a button. Hodpfx Ahou U Ey Ievsni - The ram plate is guided by two columns. - The rear of the press is enclosed, but fitted with air outlets. - The table features an ejection chute. - Light barrier with anti-reach-under protection. - Mountable anti-reach-over guard. - Optional: 2 heating plates, 500 × 500 mm heating surface each, total size 550 × 550 mm, with controller, up to 200°C, incl. 20 mm thick insulated plate, with timer - Optional: Installation and training Delivery times: Currently, a lead time of approximately 6 weeks is to be expected (without heating plates). Heating plates delivery time approx. 8 weeks. Customer service: From Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen or Gelsenkirchen

Condition: new, functionality: fully functional, Komfi Amiga 52 Laminator – High Automation and Industrial Precision For sale: Komfi Amiga 52, a professional thermal laminator designed for small and medium print shops with a strong focus on digital jobs and short/medium runs. This machine stands out for its high reliability, advanced automation, and excellent lamination quality, significantly reducing waste and minimizing operator intervention. Its compact and accessible design ensures maximum performance in limited spaces while maintaining ease of operation and maintenance. Ideal Applications • Book covers (hardcover and softcover) • Commercial and promotional print jobs • Lightweight packaging and folding cartons • Demanding digital work • Window laminating • Jobs with frequent changeovers Hedpfxsyi Sd Se Ahvjni Key Features • Intelligent control system with sensors for continuous monitoring • Automatic machine and material protection functions (overlap detection, sheet separation, jam prevention) • High registration accuracy and secure stop without damaging sheets • Reliable feeding at maximum speed • Modular configuration with multiple options and accessories • Easy operation with automated start-up sequences • Job memory and connectivity for remote diagnostics • Prepared for challenging substrates or problem digital prints Technical Specifications • Max. speed: 25 m/min • Max. sheet size: 560 × 800 mm (optionally up to 1016 mm) • Min. sheet size: 200 × 200 mm • Paper weight: 115 – 600 g/m² • Max. pile height: 52 cm • Heating: Single-zone IR • Warm-up time: 3–5 min • Overlap accuracy: ± 0.8 mm • Dimensions (with delivery): 2.63 × 1.00 m Standard Configuration • Single-action Komfi feeder • Air compressor and vacuum for stable feeding • Rubber-covered pressure roller • Pneumatic uniform pressure system • Adjustable reel shaft with brake • Extended anti-wrinkle roller • Automatic decurling unit • Integrated film perforator • Delivery table with air jets Available Options (Depending on Configuration) • Intelligent bottom feeder (manual or online with digital press) • Sheet preheater • Hot knife for perfect separation • Automatic jogger/table stacker • Ionizer/anti-static bar • Film slitter • Additional perforator • Foiling/effects device • Autopilot for automatic supply control Key Production Advantages ✔ High automation = reduced operator requirements ✔ Low waste and fast set-up ✔ Compatible with short runs and frequent job changes ✔ Consistent, professional quality ✔ Robust Komfi construction

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Hnsdpfx Aheyizqnovsi Heating capacity: 6 MW Fuel: wood chips With oil burner as backup heating Dismantling must be carried out by the buyer

Year of construction: 2018, condition: used, functionality: fully functional, We offer this used Wolf WK-com N-W B127 Air Handling Unit with heat recovery (HRV) and Panasonic cooling, year of manufacture 2018. Nominal air volume flow (20 °C): 7,500 m³/h Nominal air volume flow (20 °C): 2.08 m³/s Total pressure difference (tot. Δp stat.): 721 Pa External pressure difference (ext. Δp stat.): 400 Pa System efficiency η: 67.0 % Fan speed at operating point nᵥ: 1,357 rpm Hsdpfx Ahoyir Nzjvoni Maximum fan speed nᵥ max: 1,550 rpm Current consumption at operating point Iᵦ: 3.4 A Nozzle differential pressure Δp Dü: 593 Pa Calibration factor k: 308 Motor rated power Pₙ: 3.4 kW Motor rated current Iₙ: 5.4 - 4.2 A Rated voltage Uₙ: 3~380..480/50 V/Hz Control voltage at operational point: 8.8 VDC If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, tank capacity: 1,000 l, 1000 liter electrically heated, insulated container made of V2A stainless steel Hjdpoyfwpxefx Ahvsni

Condition: like new (used), Ilapak stainless flow wrapping and shrink tunnel line Hnedpfod I Ncgox Ahvei Carrera 2000 PC stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel

Condition: used, Meurer heat shrink tunnel adjustable temp, variable speed, aperture 400mm x 350mm, mobile frame, Hedpfx Ahedmn Umovoni

Condition: excellent (used), Heat exchanger, shell-and-tube heat exchanger, liquid cooler, Baltimore Aircoil International BAC F100, used machine Manufacturer: Baltimore Aircoil International Type: BAC F100 Year: 2015 Pressure: -10 / 10 bar Temperature: -20 / 82 °C Hnsdpfx Ajyfnulshvsi Medium: Water / Glycol

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest. Hsdpfewa Ax Ajx Ahvjni

Condition: used, mileage: 60,000 km, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, loading space length: 4,700 mm, loading space width: 2,200 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, tail-lift, Year of manufacture: 2020 Suspension: leaf suspension Front axle: Steering Empty weight: 2.990 kg Carrying capacity: 1.510 kg GVW: 4.500 kg Tail lift: Zepro Radiografisch, tail lift, 750 kg Hnedeyidpkepfx Ahvei Sub Woofer

Year of construction: 2013, condition: ready for operation (used), Technical details on demand. Hnedpfx Aog Uwx Rjhvei

Condition: ready for operation (used), System includes (1) Two-Cylinder Motor HERFORD 2H 280, power: 150PS, rotational speed: 400/min, electric/ heating power: 83/ 140kWh, with Generator MARELLI MJB 250 LE4 (2) Three-Cylinder Motor HERFORD 3H 280, power: 225PS, rotational speed: 400/min, electric/ heating power: 125/ 212kWh, with Generator MARELLI MJB 250 MA4. Hjdpogg Stfofx Ahvsni

Year of construction: 2019, condition: ready for operation (used), There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available. Hnedpfx Ajt R Tr Sjhvoi

Year of construction: 2001, condition: ready for operation (used), Throughput capacity: 600 litres/h, in the process the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, is heated to 130° C by steam injection in less than a second. The process heats the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, to 130° C in less than a second by steam injection and then cools it again in the shortest possible time by evacuation, further cooling is achieved by the inflowing product in the counterflow and ice water, includes feed tank, speed-controlled pumps, homogeniser, preheater, infusion tank, expansion tank, steam condenser, cleaning agent tank and other elements, on-site inspection is possible. Hnjdorp E Nkspfx Ahvoi

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Hnjdpexc Ni Rjfx Ahvji

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Hnedpfx Aotphubshvsi

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Hnedpfxstwqzrs Ahvsi

Year of construction: 1986, condition: ready for operation (used), A plate heat exchanger WMW is available. Heating medium: steam, cooling fluid: water, temperature range: 15°C-90°C, flow rate: 2000l/h, steam quantity: 300kg/h, weight: approx. 355kg. An on-site inspection is possible. Hnsdpex Syv Nefx Ahvei

Condition: like new (used), functionality: fully functional, power: 250 kW (339.91 HP), fuel type: diesel, operating hours: 615 h, Complete firepack installation supplied by Van Wijk & Boersma Firpacks (NLD). The entire system comprises two diesel firepacks, each configured to deliver 700 m3/h at 8 bar in accordance with NFPA-20 regulations. An electrical control panel, type WB 882-D20, is installed in compliance with NFPA standards and includes a pressure switch. Each unit features a double-walled fuel tank with a capacity of 600 liters. • Engine brand: Scania • Engine type: DI-9-48A 10-14 • Pump brand: Aurora • Pump type: 8-481-17B • Year of manufacture: 2004 CHARACTERISTICS (per unit) • Pump capacity: max. 1050 m3/h Hodpfx Ahoxdlmhevsni • Pump pressure: max. 9.4 bar • Engine power: 250 kW • RPM: 2050 • Operating hours: 460 – 615 hours

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Preheating boiler (oil) Aura AKL 2504 G ▪ Power: max. 2500 kW ▪ Flow rate: max. 99 m3/h ▪ Pressure: max. 10 PS ▪ Temperature: -10 / 315 °C ▪ Volume: 1873 L Burner Weishaupt WM-G30/1-A ▪ Power: max. 3500 kW ▪ Gas type: Natural ▪ Pressure: max. 1 bar Hedpfxsxfa Tlo Ahvoni

Condition: excellent (used), Year of construction: 2007, power: 1,600 kW (2,175.39 HP), Complete heating system Polzenith 1.6 Mw, 2007 The heating system consists of: - Fuel storage. Steel construction with moving floor - Scratch requirement - Electric filter Beth with electrical cabinet - Chimney 12m Hnedpfx Asvlkdxohvji - All smoke lines - Complete with electrical and hydraulic system Very good facility. Ready dismantled, ready for loading.

Condition: new, Year of construction: 1988, For sale: mobile industrial fan from the former GDR, manufactured by VEB MAW Armaturenwerk Wehrsorf (Zittau), powered by a 0.75 kW motor from the USSR. Sturdy steel construction on castors – ideal for dust extraction, air supply, local ventilation, or machine cooling. Technical data: • Airflow: 1020 m³/h • Total pressure: 834 N/m² • Static pressure: 681 N/m² • Density: 1.20 kg/m³ • Speed: 2800 rpm • Power consumption: 0.5 kW • Max operating temperature: 35°C • Year of manufacture: not fully specified – likely 1980–1990 Motor: • Type: АИР71А2УЗ • Power: 0.75 kW • Speed: 2820 rpm • Voltage: 220/380 V • Protection class: IP54 • Manufactured in the USSR Advantages: • Compact and mobile design • Operational drive, ready for use • Suitable for workshops, paint shops, ventilation, burners Hsdeud R Iiopfx Ahvoni

Condition: good (used), SANYO Water Heat Exchanger Model: SGP-WE170J2 Power source: 220-240 V AC, 1 phase, 50 Hz Maximum electrical power: 9 kW, 0.05 A (continuous operation) Device protection: IP24 Cooling capacity: 50 kW Hnjded Tlixepfx Ahvji Heating power: 60 kW Heat input (HS) (cooling): 43.5 kW Heat input (HS) (heating): 46 kW Refrigerant: R407C Design pressure high pressure side: 30 bar Design pressure low pressure side: 16 bar If you need more information. We are here to help! Please contact us using the form or give us a call Your ad has been automatically translated. Translation errors are possible