Used Power Plant for sale (42,258)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 999 kW (1,358.26 HP), input voltage: 400 V, type of cooling: water, warranty duration: 6 months, input frequency: 50 Hz, Equipment: documentation/manual, We are pleased to offer for sale a brand-new Jenbacher J320 D05 Combined Heat and Power (CHP) unit, featuring an electrical output of 999 kWe. The equipment is brand new, has never been commissioned or operated, and has zero operating hours. 1. Technical Specifications Manufacturer: Jenbacher Engine Model: J320 D05 Equipment Type: Combined Heat and Power (CHP) Unit Electrical Output: 999 kWe Fuel Type: Natural Gas Condition: Brand New – Never Operated Operating Hours: 0 Hours Availability: Immediately Available Location: Greece Chodpfx Agj Ahwibsrjd 2. Available Configurations Option 1 – Standard CHP Unit | Immediate Availability The brand-new Jenbacher J320 D05 CHP unit is available in its standard configuration and ready for immediate delivery. Option 2 – Containerized CHP Solution | Optional Upon request, the CHP equipment can also be supplied and installed in a specially designed containerized solution. This configuration offers a comprehensive, project-specific solution tailored to the customer's technical, operational, and installation requirements.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,613 h, functionality: fully functional, machine/vehicle number: B4/19-002/LV, total height: 2,591 mm, total length: 2,990 mm, total width: 2,438 mm, fuel: liquefied natural gas (LNG), overall weight: 5,000 kg, type of cooling: water, empty load weight: 4,900 kg, Equipment: documentation/manual, As part of the demonstration, the compression in all cylinders can be shown to be 15 bar. Electrical power – 50 kWe Thermal power – 80 kW Gas consumption – 14.6 Nm3/h Engine manufacturer – MWM Number of cylinders – 4 Generator manufacturer – Marelli Type – MJB 225 SA4 Csdpfx Agsz Rxgyjrohd Power – 62.5 kVA Rated power – 50 kW Frequency – 50 Hz Voltage – 400 V

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), PRICE REDUCTION!!!! Like-new combined heat and power (CHP) units – 2 × WOLF Power Systems – 140 kW electrical each – unused For sale are two like-new CHP units from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or put into operation and are therefore in technically unused condition. Since delivery approximately 5 years ago, they have been stored in a dry and protected environment. Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Condition: unused / like new Storage: dry, professionally stored Availability: immediate Chjdeyt Emnjpfx Agred The current new price is approximately €220,000 net per unit. This represents a very rare opportunity to acquire high-quality CHP technology at a significantly reduced price compared to the new price – ideal for commercial use, district heating projects, agriculture, or energy contracting. Inspection possible by arrangement. Asking price is half the new price; please submit your offer!

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Chjdpfx Ajz D Ihfegrsd

Condition: excellent (used), Year of construction: 2007, power: 1,600 kW (2,175.39 HP), Complete heating system Polzenith 1.6 Mw, 2007 The heating system consists of: - Fuel storage. Steel construction with moving floor - Scratch requirement - Electric filter Beth with electrical cabinet - Chimney 12m - All smoke lines Cedjvlkdxspfx Agrehd - Complete with electrical and hydraulic system Very good facility. Ready dismantled, ready for loading.

Condition: like new (used), Year of construction: 2018, operating hours: 865 h, functionality: fully functional, For sale: Jenbacher gas engine JMS 420 GS-B.LC. A used, high-performance Jenbacher JMS 420 GS-B.LC gas engine (series 4) for stationary use in combined heat and power (CHP) plants is for sale. Manufacturer: INNIO Jenbacher. Type: JMS 420 GS-B.LC. Electrical output: approx. 1,400–1,500 kW (depending on gas type and configuration). Gas type: natural gas / biogas / sewage gas. Year of manufacture: 2018. Operating hours: 865 h. Condition: engine preserved. Scope of delivery: engine including control panel, exhaust system, etc. Special features: high electrical and thermal efficiency, reliable MWM/Jenbacher technology for continuous operation. Location: 48599 Gronau. Availability: immediately / by arrangement. Price: negotiable (upon request). If you are interested, have questions about technical details, or would like to arrange a viewing appointment, please do not hesitate to contact us. Cedpj Ahnzbefx Agrehd

Condition: ready for operation (used), Year of construction: 2022, operating hours: 29,570 h, functionality: fully functional, fuel: domestic gas H, type of cooling: water, input frequency: 50 Hz, Equipment: rotational speed infinitely variable, Used, containerized Jenbacher J612 GS-N.L natural gas generator set, rated at 2,002 kW, 690 V, and 50 Hz. The unit was originally manufactured in 2012 and underwent a short block replacement in 2022. A total of 29,570 operating hours have been recorded since the short block replacement. The unit includes the Stamford alternator, sound-attenuated container, auxiliary control cabinets, DIANE XT3 control system, container-mounted gas train, cooling system, and available documentation. It was shut down while operating at full load, and a running video is available. Currently stored in Spain and ready for inspection and loading. Csdpo Agvawefx Agrohd Manufacturer: Jenbacher Model: J612 GS-N.L Rated electrical output: 2,002 kW Fuel: Natural gas Speed: 1,500 rpm Frequency: 50 Hz Output voltage: 690 V Generator manufacturer: Stamford Original year of manufacture: 2012 Short block replacement: 2022

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ type of fuel: Gas + Öl Complete Power Plant 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, Chjdpeu Nxatefx Agred intermediate storage tank + fuel depot tanks 4,8 m³ *

Condition: like new (used), Year of construction: 2022, functionality: fully functional, fuel: liquefied natural gas (LNG), - 1x CHP unit Chjdpszazraofx Agrjd - As new - Control cabinet still in original packaging - Located in Genthin We are selling a CHP unit in as-new condition. It has never been used, and the control cabinet is still in its original packaging. It has never been used but has been regularly maintained and is fully functional. The CHP unit is located in Genthin and can be inspected at any time.

Condition: used, Year of construction: 2015, operating hours: 38,000 h, functionality: fully functional, power: 70 kW (95.17 HP), 1. HKW Kuntschar + Schlüter GTK70 (70 kW electrical, MAN E0836E engine, year of manufacture 2015, in use from Q1 2020, approx. 38,000 hours, manufacturer overhaul, regular full maintenance by the manufacturer, maintenance documentation available for inspection, fully functional, out of service since 10/12/2026. Current maintenance is pending. Codpfxsz Tdfge Agrshd 2. Gas condensing boiler Wolf MGK-2-470 (~200 kW real load, max. 467 kW, approx. 11 years old), used as a peak load boiler. 3. Buffer tank approx. 8,000 liters (with insulation, approx. 11 years old). 4. Expansion tank Reflex Type N600 (600 liters): On request: Soundproof enclosure (multi-layer panels, steel frame, approx. 60 m², outdoor installation, supply/exhaust air).

Condition: new, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, We are offering two new Totem 20 combined heat and power (CHP) units, as well as a new Totem 10 CHP unit, manufactured in 2016. These CHP units are from a warehouse clearance. According to the previous owner, the units are eligible for CHP subsidies, as they have never been installed. However, this must be verified independently. The TOTEM 20 generates a maximum of 20 kW of electricity and 48.5 kW of heat. The TOTEM 10 generates a maximum of 10 kW of electricity and 25.2 kW of heat. Please refer to the uploaded data sheet and operating manual for all other technical specifications. Depending on the location, the CHP units can also be delivered to Germany or Austria. The price for the Totem 10 is €6,000. The price for the Totem 20 is €7,000. The current list price for a new Totem 20 is approximately €57,000 gross, and they are being sold for around €45,000 (see photo). Chodpfjytympjx Agrod If you have any questions or require further information, please send us a message or call us. We offer a start-up guarantee in the form of a return policy in case of any issues, but we will not cover any costs incurred.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 45,699 h, functionality: fully functional, machine/vehicle number: 81248168054807, power: 530 kW (720.60 HP), type of cooling: water, nominal power (apparent): 660 kVA, Equipment: documentation/manual, We are offering a used MAN E3262 LE202 combined heat and power (CHP) plant, manufactured in 2017. For sale is a standard-production CHP plant with an electrical output of 530 kW, designed for operation as a biogas plant or with natural gas. The plant is based on a MAN gas engine and a Leroy Somer synchronous generator. The corresponding manufacturer's data sheet is available. The unit is ready for operation and has been functioning perfectly up to the present. The entire plant is for sale, including the CHP unit, container with antechamber and switchgear cabinet, fresh and used oil tanks, plate heat exchanger, exhaust stack, exhaust gas heat exchanger, and some consumables. History & Maintenance: • Commissioning: 17.10.2017 • Major overhaul: carried out on 11.12.2025 - Replaced: cylinder heads with the latest version (M18), piston assembly including pistons, liners, connecting rods and all bearings, main cooling circuit pumps new • Last maintenance: turbocharger replacement in April 2026 - Technical data: Chjdpfx Ao Agu Tisgrod • Plant type: CHP biogas plant 530 kW • Drive engine: MAN gas engine (internal combustion engine) • Engine number: E 3262 LE 202 • Electrical output: 530 kW • Thermal output: 559 kW • Firing heat output: 1358 kW • Power factor: 0.95 • Efficiencies: Electrical efficiency 39 % | Thermal efficiency 41 % • Heat extraction: Cooling water heat 264 kW + mixed heat HT 75 kW + exhaust gas heat up to 250°C / 220 kW Generator specifications (synchronous generator): • Manufacturer: Leroy Somer • Type: LSA 49.1 S4 C6S/4 • Rated apparent power: 660 kVA / I = 630A • Rated voltages: 400/230V • Grid connection / rated current: Star / 795 A • Protection functions (grid protection relay): AMG 2 (Leonhard/Woodward Stuttgart), including overvoltage/undervoltage protection, overfrequency/underfrequency protection, phase jump and vector jump. Complies with the BDEW guideline Chapter 2.5.3.

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Codstwqzropfx Agrjhd

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Chjdpfxjxc Ni Ro Agrod

Year of construction: 2018, operating hours: 4,700 h, condition: ready for operation (used), functionality: fully functional, For sale are four used cogeneration units, type ENGUL 310 XACB, in an open-skid design. The units consist of a gas engine, a generator, and the corresponding technical components. The systems have previously been operated with syngas/synthesis gas and are suitable for professional operators, plant builders, as well as projects for reuse, overhaul, or technically verified fuel conversion. Chjdezyc Eaepfx Agrsd Of particular interest is the low operating hours of approximately 4,700 engine hours. In addition, photo documentation and operating displays are available, which document the synchronous parallel operation of the four units.

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Chsdpfszxqd Isx Agred Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, MWM / Deutz TCG 2016 V16 CHP Unit – Approx. 800 kWe – Natural Gas For sale: complete MWM / Deutz TCG 2016 V16 CHP unit, year 2007, suitable for operation on natural gas. The unit has approximately 66,031 operating hours. The last major service was performed at approximately 48,000 operating hours. The CHP unit will only be sold after the engine overhaul has been completed. Work included before delivery Prior to delivery, the following work will be carried out: - Complete overhaul of the MWM TCG 2016 V16 engine - Overhaul of the electric pumps - Cleaning of the exhaust gas cooler - Cleaning of the condenser The generator was tested while the unit was still in operation and was found to be in good working order. The unit is currently disconnected from the gas supply. The oil and cooling water have been drained in preparation for the overhaul, so the engine and complete CHP unit can no longer be demonstrated running in its current condition. Main specifications - Manufacturer: MWM / Deutz - Model: TCG 2016 V16 - Year: 2007 - Fuel: Natural gas - Electrical output: approx. 800 kWe - Generator: Marelli - Generator rating: 1,300 kVA - Grid frequency: 50 Hz - Control system: TEM Evolution - Operating hours: approx. 66,031 h - Last major service: approx. 48,000 h Scope of supply The unit is offered as a complete CHP package and includes: - MWM / Deutz TCG 2016 V16 gas engine - Marelli generator - TEM Evolution control system - Gas train Chedpfoz E A Rwjx Agred - Generator switchgear - Heat recovery equipment - Exhaust gas cooler - Condenser - Associated installation components supplied with the unit The unit is suitable for grid-parallel operation and can also be prepared for island / stand-alone operation if required. Complete service and technical documentation A complete maintenance history is available, including: - Full service logbook - Maintenance records - Oil sample reports - Electrical schematics - P&ID drawings - Technical and maintenance documentation Technical performance data for this engine type is also available, including information on electrical efficiency, gas consumption, thermal output, and total CHP efficiency. Installation and commissioning available In addition to supplying the CHP unit, CHP Solutions can also provide installation and commissioning on site. Depending on the project requirements, we can offer support with: - Positioning and installation of the CHP unit - Mechanical installation - Electrical installation - Gas connection - Cooling and heat-recovery connections - Grid connection - Start-up - Commissioning - Preparation for grid-parallel or island operation This means the CHP can be supplied not only as a unit, but also as part of a complete installed and commissioned energy solution. The unit is located in the Netherlands and can be inspected by appointment. For further technical information, documentation, photos, installation options, or a complete project quotation, please contact CHP Solutions.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 30160328026, power: 210 kW (285.52 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, nominal power: 210 kW (285.52 HP), This CHP unit comes from an investment that was never put into operation. Codpfx Agoyzcxrsrjhd

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Chjdpfowd Nw Tex Agrod Year: 2010 Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: used, Year of construction: 2009, power: 800 kW (1,087.70 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 11,700 kg, nominal power: 800 kW (1,087.70 HP), input frequency: 50 Hz, input current: 950 A, ambient temperature (max.): 30 °C, We are offering this used Jenbacher JMS 412 GS-N.TE combined heat and power (CHP) unit, manufactured in 2009. Csdpfoz Ehc Esx Agrjhd Type: JMS 412 GS-N.TE Serial number: 6289001 Year of manufacture: 2009 Rated power: 800 kW Power factor: 1 Maximum operating altitude: 150 m Maximum ambient temperature (intake air): 30 °C Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 950 A Weight: 11700 kg Performance class: G2 The unit was only operated at 555 kWh by the previous owner, but we used it at 800 kWh. According to the data sheet, it is designed for 800 kWh operation. We operated the unit with natural gas. We are selling the complete unit in a soundproof container, including the exhaust heat exchanger and chimney. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), We offer combined heat and power (CHP) units. For sale: Complete CHP unit, consisting of: • 2 × 20 kW Indop (gas) (Toyota Motor) • 5,000-liter buffer tank • All pipes and connections • Gas pipes • Heating pipes • Chimney (stainless steel) Chsdezr H I Nopfx Agred • 600-liter expansion tank • All circulation pumps • Control electronics • All sensors The entire system is fully functional and will be sold as a complete unit. Location: Slovenia. Price is negotiable.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 32,524 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER J616 GS J11 (Complete Package) This offer is for a complete power plant package, comprising cooling system, pumps, lubrication system, electrical system, and exhaust system. Total operating hours (since new): 32,524 h Maintenance: Fully serviced by INNIO Codpfx Ageytg Rberehd Operating hours since 30,000 h major overhaul: 2,524 h Major overhauls performed (20,000 h and 30,000 h): fully completed. At the 30,000 h major service, the following components were replaced with new parts: turbochargers, pistons, connecting rods, cylinder liners, piston rings, as well as main bearings and connecting rod bearings. Technical specifications: Electrical output: 2,745 kW Year of manufacture (YOM): 2016 Fuel: Natural gas Speed: 1,500 rpm Frequency: 50 Hz Alternator: Leroy-Somer Voltage: 6,300 V Scope of supply (included): - Jenbacher genset - Auxiliary control cabinets - DIA.NE XT4 - Gas ramp - Cooling system (high- and low-temperature pumps) - Thermal fluid recovery boiler - Silencer - Protection switchgear - Transformer 6.3 kV / 15 kV, 3,500 kVA (included) - Documentation Availability: Immediately

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale: a used CHP unit with few operating hours, hardly used. Natural gas. Chedpozcwhvjfx Agred Details: see nameplates.

Condition: used, Year of construction: 2016, operating hours: 32,318 h, functionality: unexamined, power: 30 kW (40.79 HP), Used Spanner HKA 30, year of manufacture 2016. The unit was fully operational. It has already been dismantled and is ready for collection. 30 kW electric Chedpfx Aezbnklegrsd 73 kW thermal Operating hours: 32,318 Engine: GM 5.7L, non-turbo Includes complete control cabinet and numerous accessories.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, total height: 2,600 mm, total length: 12,200 mm, total width: 2,500 mm, overall weight: 13,000 kg, Combined Heat and Power Plant (CHP), Manufacturer: STIEGELE, housed in soundproof special containers, 800 kVA Manufacturer: Stiegele Year of manufacture: 2007 Operating hours: approx. 12,000 per engine Engines: Make: 2 x Scania DC 12-54, Variant A03P Engine speed approx. 1,500 rpm each Electric drive: EMK type KS160L-4-PTC Feed pump: Elektra type DD0705 Mode of operation: Palm oil (primary), Diesel / Heating oil. The CHP was designed for operation with vegetable oil (palm oil) and has been converted accordingly. For continuous operation with heating oil or diesel, technical modifications may be required. Generators: Make: 2x Marelli Type: MJB315MA4 Output: 880 kVA Touch control: Manufacturer Woodward, Type GCP-30 Csdpfxey Iu Hno Agrohd Dimensions (per container): Length: approx. 12,200 mm Width: approx. 2,500 mm Height: approx. 2,600 mm Weight: approx. 13,000 kg The CHP system is modularly installed in two 40" soundproof containers and has been out of operation for some time. The sale includes the containers, control system, and heating oil tank. Viewing and inspection of the system is expressly encouraged. Sale exclusively to commercial customers. Any and all liability for material defects and warranties is excluded. The machine is sold used and as inspected, with no guarantee or assurance of specific properties. Claims for damages are only possible in cases of intent, gross negligence, or injury to life, body, or health.