Used Granulator for sale (681)

Condition: new, ZERMA single-shaft shredders of the ZPS series offer versatile applications. Dwsdpfx Asyr I Ixjlbsb They are suitable for the size reduction of heavy and bulky parts that cannot be directly granulated by a granulator. The large and heavy rotor of the ZPS shredder series, combined with the low rotor speed and high torque, ensures low power peaks, thereby avoiding high energy costs. Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the specific requirements, the shredded material can be used directly in the processing operation or can be further granulated in a downstream granulator. The shredders of the ZPS series are equipped with a two-stage hydraulic system that prevents rotor blockage. The knives and knife holders are completely bolted to the rotor. Generously sized, externally mounted rotor bearings and a hydraulically tiltable screen basket come as standard on every shredder. The machines can be equipped or upgraded with numerous options, such as rotor cooling or Hardox wear protection. Compared to ZSS shredders, the machines of the ZPS series are equipped with a higher pressure unit, which optimizes the feed between pusher and rotor, especially for large-volume parts or pipes.

Condition: used, Year of construction: 2006, - Edge milling unit 2 x 2.2 kW - Combi-melt gluing unit - Automatic edge magazine - Trimming unit 2 x 0.8 kW - Flush trimming unit 2 x 0.7 kW - Fine milling unit 2 x 0.3 kW - 2 quick-change sets for fine milling - Automated copy milling unit 2 x 0.37 kW - 2 pull blades - 2 surface pull blades - 5-way spraying system - Fine buffing unit with cloth disc 2 x 0.2 kW Edge banding machine Manufacturer: OTT Type: Twister Technical data: Glue application: Hot-melt adhesive application roller with simultaneous and counter-rotating action Edge thickness: 0.3-10 mm Workpiece thickness: 8-60 mm Workpiece width: 70 mm - Minimum Workpiece length: 150 mm - Minimum Operating pressure: 6 bar Feed power: 3.0 kW Feed speed: 14-20 m/min. Electrical connection: 3 x 400 V, 50 Hz Extraction: at 20 m/s, 1 x 180 mm diameter = 35 m³/min. Air velocity: 20 m/s - Minimum Compressed air consumption: 300 liters/min. (approximate value) Equipment - Machining units: Joining: - 2 x 2.2 kW, n=14600, 250 Hz, two individually controlled spindles. Combi-melt gluing unit: - Top-mounted gluing unit with interchangeable hopper for processing EVA, PUR hot-melt adhesives, or standard cleaning granules, hopper volume 2.5 l Edge magazine: - Automatic edge magazine with optical monitoring for strip edges in fixed lengths Trimming: - 2 x 0.8 kW, n=12000, 200 Hz, automatic pivoting 0 / 5, 2 HM saw blades, 140 x 3.2 x 16 mm, z=34 Flush trimming: - 2 x 0.7 kW, n=12000, 200 Hz, single-sided, with 2 HM reversible blade cutter heads HF70, 70 x 20 x 16 mm, z=4 Fine milling (chamfer 15 / 30 / 45): - 2 x 0.3 kW, n=12000, 200 Hz, double-sided, with 2 HM reversible blade cutter heads HF70, 70 x 20 x 16 mm, z=4 AWSR (radius R2-R5): - 2 quick-change sets for fine milling, 2 x 0.3 kW, with 2 HM reversible blade cutter heads AR73 x 16 x 16 mm, z=3, R2-R5 Copy milling: - Automated copy milling with two separate spindles for machining end faces and longitudinal radii. Motor power: 2 x 0.37 kW, 12000 rpm, Tools: R1 - R3 Pull blade: - 2 HM pull bars, automatically adjustable Dedpezuyifsfx Albewb Surface pull blade: - 2 HM pull bars with fine adjustment PU set: - 5-way spraying system, 2 x release agents, 1 x lubricant, 2 x cleaning agents, fine buffing unit with cloth disc Edge finishing: - 2 x 0.2 kW, n=2800, 50 Hz, oscillating brushes Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, 1. Edge banding machine Manufacturer: Homag Dsdpfx Alezuyilsbowb Type: KAL 210 Ambition 2264 Year of manufacture: 2010 Technical data Release agent spraying system Joint milling unit (2 x 4 kW) Glue application A20 (granule/quick-melt system) Pressure zone with driven pressure rollers Miter saw HL84 (2 motors) Flush-/radius-/chamfer milling unit BF10/BF20 Corner copying unit FK11 (2 motors) Profile drawing blade PN10 Straight drawing blade for glue joint Buffing unit (polishing) Release agent and cleaning agent spraying system at the outfeed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Container loading system (Fullfiller), the fast and uniform loading of granulated products and pellets into ISO containers. Standard capacity: up to 240 m³/h. Main motor power: 11 kW. Includes feed hopper, throwing unit, auxiliary ventilation system, electrical panels, controls, platform, guardrails and access ladder. Serial No.: 488981. Djdpfx Alezvcyvebswb

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), temperature: 90 °C, total length: 1,500 mm, total height: 2,450 mm, overall weight: 790 kg, actuation type: electric, The BDX-F2000 Drying Hopper Mixer is a high-capacity industrial unit designed for simultaneous drying and mixing of plastic granules before processing. By combining efficient hot-air drying with continuous material agitation, the system ensures uniform moisture removal and consistent material quality throughout the entire batch. Technical Specifications • Model: BDX-F2000 • Hopper capacity: 1800 L • Heating power: 18 kW • Mixing screw motor: 3 kW • Blower power: 0.55 kW • Throughput: 500–1000 kg/h (depending on material) • Dimensions: 2450 × 1500 mm • Weight: 790 kg • Material of construction: AISI stainless steel Djdpfxozvxc Hj Albowb Model: BDX-F1000 • Hopper capacity: 900 L • Heating power: 14 kW • Mixing screw motor: 3 kW • Blower power: 0.55 kW • Throughput: 300–500 kg/h (depending on material) • Dimensions: 2300 × 1100 mm • Weight: 690 kg • Material of construction: AISI stainless steel Efficient Drying and Mixing The BDX-series combines two essential processes into one machine: • Hot-air drying for efficient moisture removal • Continuous screw mixing for uniform temperature distribution The integrated mixing system continuously circulates the material inside the hopper, preventing localized overheating and ensuring that every granule receives the same drying conditions. This results in faster, more consistent drying and improved processing stability. The hopper is manufactured from high-quality stainless steel. Applications The BDX-series is suitable for drying and mixing: • PE (LDPE & HDPE) • PP • PVC • PET • ABS • PA (Nylon) • PC • Engineering plastics • Virgin material • Recycled plastic granules • Masterbatch blends It is ideal for extrusion, injection molding, blow molding, compounding, and recycling operations.

Condition: new, Year of construction: 2026, overall weight: 100 kg, total height: 100 mm, total width: 900 mm, total length: 800 mm, power: 1.5 kW (2.04 HP), The XHS-series Vertical Mixer is designed for fast and uniform mixing of plastic granules, masterbatch, recycled materials, and additives before processing. Its efficient paddle mixing system provides excellent blending performance while minimizing energy consumption. The mixer features a durable stainless steel hopper and mixing blades, ensuring long service life, easy cleaning, and contamination-free material handling. It is suitable for extrusion, injection molding, blow molding, compounding, and plastic recycling applications. Technical Specifications Dodpfx Alozvxl Iebewb • Model: XHS-50V • Hopper capacity: 50 L • Mixing capacity: 20 kg per batch • Mixing time: 20 kg in 6–8 minutes • Mixing motor power: 1.5 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 800 x 900 x 1000 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 100 kg • Control system: Control box with timer relay • Model: XHS-100V • Hopper capacity: 100 L • Mixing capacity: 40-50 kg per batch • Mixing time: 50 kg in 6–8 minutes • Mixing motor power: 3 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 960 x 1000 x 1200 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 150 kg • Control system: Control box with timer relay • Model: XHS-150V • Hopper capacity: 150 L • Mixing capacity: 50-70 kg per batch • Mixing time: 75 kg in 6–8 minutes • Mixing motor power: 4 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 1080 x 1080 x1200 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 210 kg • Control system: Control box with timer relay • Model: XHS-250V • Hopper capacity: 250 L • Mixing capacity: 100–120 kg per batch • Mixing time: 120 kg in 6–8 minutes • Mixing motor power: 7.5 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 1400*1200*1550 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 290 kg • Control system: Control box with timer relay Efficient Mixing System The XHS-250V uses horizontally rotating stainless steel paddles that provide fast and homogeneous mixing of plastic materials. The paddle geometry is designed to maximize mixing efficiency while keeping power consumption low. The robust mixing blades offer excellent wear resistance, long service life, and can be cleaned quickly between production batches. Easy Material Discharge The mixer is equipped with a bottom discharge outlet, allowing quick and convenient unloading of mixed material directly into containers, vacuum loaders, or processing equipment.

Condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: unused, without controls -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces Djdszbk Tiepfx Albewb -Inlet: Ø 400 mm -Ejection: Height adjustable -Quantity: 3 pieces available -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg

Year of construction: 2008, condition: used, functionality: fully functional, FREWITT MF-LAB – PHARMACEUTICAL LABORATORY MILL / GRANULATOR For sale: FREWITT MF-LAB laboratory mill / oscillating sieve mill, used in pharmaceutical applications, in excellent used condition. The machine is supplied with an extensive package of 13 original sieve inserts in different sizes, as well as comprehensive original documentation and qualification documentation. TECHNICAL DATA Manufacturer: FREWITT SA, Switzerland Model: MF-LAB Year: 2008 Serial No.: 6180310817 Electrical supply: 400 V / 50 Hz Current: 16 A Design: ATEX APPLICATION The MF-LAB is designed for laboratory and pharmaceutical applications and can be used for gentle size reduction, calibration, and sieving of dry or moist products. Particularly suitable for: - Pharmaceutical R&D - Laboratory and pilot applications - Granule calibration - De-agglomeration - Sizing and sieving - Heat-sensitive products Dwjdozxdgiopfx Albsb EXTENSIVE SIEVE PACKAGE A major advantage of this machine is the large number of included sieve inserts. Included are 13 marked sieve inserts in 9 different designs/sizes. All sieves shown in the photographs are included in the scope of supply. DOCUMENTATION Comprehensive original documentation and qualification documentation are available with the machine. CONDITION Excellent, very clean used condition from pharmaceutical use. Inspection and demonstration can be arranged by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged upon request. CYCRON GmbH Switzerland Invoice will be issued by CYCRON GmbH. Subject to prior sale and errors.

Condition: new, Year of construction: 2024, Chopper knife 40 x 40 concave Knife for Weima, large size ... Suitable for almost all common shredders/granulators Dwsdpfx Aljbxu Dhebsb Available from stock in Bitburg Subject to prior sale

Year of construction: 2017, condition: excellent (used), Included: screw conveyor; vibrating conveyor pipe with vibration motor drive. Total height: approx. 9250 mm Effective conveying height: 5800 mm Outer diameter: Ø 1200 mm Conveyor cross section: 300 x 100 mm Feeding height: approx. 1650 mm (machine) approx. 3100 mm (incl. support) discharge height: approx. 8900 mm (incl. support) Dsdpfx Aloinwfisbewb number of spiral shelves: approx. 32 pieces heat exchanger surface: approx. 27,5 m² number of cooling/heating circuits: 32 pieces Material: stainless steel So far in use for conveying and cooling of granules and glass fibers (approx. 2.5 t/h) Free loading; Currently, the device can still be viewed built in operation.

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm Dwodpfx Aloqy E Evsbjb - Drive: Siemens motor, 95 kW - Volumetric K-Tron metering system - Degassing zone - Optionally with die head - Control system Optionally with strand granulator, water bath, etc. Inspection possible by arrangement.

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Digicolor is for sale. This granulate dryer operates according to the principle of dry air drying. Dwjdpfx Aleywh E Ajbob 40 liters Small footprint Simple adjustment and operation Constant dew point of the dry air Optimization of all drying parameters Energy-efficient drying technology No compressed air or cooling water required Dust-free dry air thanks to adsorption rotor technology Anti-stress function, SmartMode, prevents over-drying of the plastic granulate.

Year of construction: 2019, condition: used, functionality: unexamined, Complete Avalon Sciences Geochain seismic acquisition set, including approx. 30 GSR-1 MKII Slim Seismic Receiver Tools with digital modules, recorders, power panels and surface support hardware. Only used a few times, in very good condition. Technical specifications: Approx. 30 × GSR-1 MKII Slim Seismic Receiver Tools with AS251 digital modules Dwjdpfxjw R Tq As Albsb Multiple Inter-tool cables (ITC-4-40M) Telemetry adapter, formatter units, gamma-ray tool and crossover/adaptors GSP digital recorders (8 analogue channels) GPP Geochain Power Panels GPS timestamp kits Rack-mounted PCs with hot-swap drives and NAS storage Network and power infrastructure (switches, monitors, cabling) Packed in plastic and alloy cases Total weight approx. 1,450 kg Details: Used only a few times Complete and operational system Location: Warehouse Haaksbergen Condition: Used Documentation and packing lists available on request All information has been compiled with the utmost care, but no liability is accepted for possible errors or omissions.

Condition: new, Year of construction: 2023, functionality: fully functional, space requirement width: 3,000 mm, space requirement length: 3,000 mm, space requirement height: 18,000 mm, Solex cooler conditioner dryer Dwsdexw D Nhopfx Albsb Height: 18 meters, entirely made of stainless steel 316, designed for cooling, drying, and conditioning granules of food, fertilizer, or plastics. Capacity: 18 tons per hour.

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: Dsdpozy Aixjfx Albowb - Aluminum superstructure - Aluminum-composite floor - EquiDrive chassis Net price: €6,386.56 / Gross price: €7,600.00 Article number: HEQA20100000.01 Technical data: • Brand: Humbaur • Model: Equitos Alu • Vehicle type: Horse trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (L x W x H): 315 x 165 x 230 cm • Exterior dimensions (L x W x H): 460 x 220 x 280 cm • Loading height of the floor: 41 cm • Permissible total weight: 2,000 kg • Tare weight: 800 kg • Payload: 1,200 kg • Chassis: Low loader (wheels beside the superstructure) • Tires: 175/70R13 • Chassis: EquiDrive® chassis • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • EquiDrive® chassis • Preparation for wheel shock absorbers • Aluminum-composite floor 21 mm (aluminum floor) • 8 mm thick rubber floor glued and sealed • Superstructure made of double-walled, anodized aluminum profiles • Solid, all-round and galvanized frame profile • Elegant, galvanized rear support with integrated lighting • Large entry door with 3-point locking system • Ramp with rubber granulate mat • Divided breast and rear bars • Breast bars with panic release • Tinted opening windows in poly cap • Interior lighting and hay net ring • Automatic support wheel mounted in the center with maneuvering handle • Poly cap in black-metallic • Exclusive wind deflector for draft-free ventilation of the interior • Tires suitable for 100 km/h (only in Germany) • External tie-down option • Internal tie-down option • Padded safety box bar system • Box bars divided with plastic protection • Depth adjustment for box bars • PVC clear partition • Entry door lockable • Door latch on entry door • Windows tinted and openable • Tandem mudguards, plastic (black) • Lifting device with gas pressure shock absorbers on the rear door • Step on the rear door • 13-pin plug with reversing and fog lights • License plate holder: 340x200mm (2-line) _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Subject to errors, omissions and prior sale -

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Manufacturer: Rapid Model: 2645-KU 3 rotor knives Djdjwg R S Ropfx Albewb 2 stator knives Power: 12 kW Slow-speed granulator with soundproof enclosures PRICE REDUCED FROM 4,250 TO 3,850 EUR!!!

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: Mev600, Filling and dispensing scale for granules, coffee, pasta, nuts, baked goods, herbs, and all free-flowing products. Filling range: 10 g to 2000 g. • Hopper located on top of the machine, with a volume of 40 liters. • The product is conveyed via a vibrating channel. • Vibrating channel made of stainless steel AISI 304. • Vibrating channel speed is adjustable; faster for coarse weight and slower for fine dispensing. • Electronic load cell on the weighing plate with an electronic weight control system. • Minimum/maximum weight: from 10 grams to 2000 grams (depending on product volume). • Voltage: 220 V, single-phase, 50 Hz. • Air connection: 50 liters/cycle. CONTINUOUS SEALING MACHINE, TYPE MINISEALING (compatible with the filling system). • Horizontal CONTINUOUS THERMO-SEAL MACHINE with an inclined belt, adjustable belt speed, and adjustable temperature for sealing/closing bags. • Equipped with a DATA PRINTER with 2 lines. • Voltage: 220 V, single-phase, 50 Hz. • Spare parts set included. • MACHINE COMPLIES WITH ALL CEE STANDARDS FOR DEVICES AND SWITCHES. Dwedszx Rk Uspfx Albeb Price (optional): EUR 3,500.00.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, For sale are 3 Erema regranulation systems. The nameplates and details can be seen in the photos. Inspections can be arranged by appointment. Dwsdpfxszx D U Hs Albjb

Year of construction: 2008, condition: used, functionality: fully functional, Blažek ABM-5 D stick packaging line for sale – 3 machines available For sale are three fully functional Blažek ABM-5 D stick packaging lines, including downstream collection stations. These systems were specifically developed for the precise filling of fine-grained sugar and feature volumetric dosing for granules and crystalline raw materials. Thanks to their robust design and reliable technology, the machines are also suitable for numerous other free-flowing products with comparable properties. Djdpfjzvww Nsx Albowb Technical specifications: Manufacturer: Blažek Type: ABM-5 D Dosing system: Volumetric dosing Suitable for: Fine-grained sugar Granules Crystalline raw materials Current configuration: 5 sticks per cycle Includes downstream collection station Machines are fully functional Available systems: Year of manufacture 2008 Year of manufacture 2008 Year of manufacture 2016 Condition All systems are in functional condition. A demonstration in test operation on-site is possible by arrangement, so that interested parties can be convinced of the function and performance of the machine. Inspection An inspection of the systems is possible by appointment. We will gladly provide further technical information, pictures, or a test run video. If you are interested, we look forward to hearing from you.

Condition: used, Aluminum silo (plastic granulate silo) resting on a base ring – used – designed for a bulk density of 0.8 kg/dm³ Dwodpfx Aljww Em Dsbob Volume: 50,000 liters Manufacturer: EVS Available quantity: 1 Diameter: approx. 3,500 mm Cylindrical height: approx. 6,900 mm Total height: approx. 8,100 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Angle of the upper base: 15° Angle of the cone: 90° Equipment and connections: In the upper base: 1 x access hatch DN 600 with hinged cover 1 x vent 1 x roof edge railing with handrail 2 x crane lugs 1 x flange for filling line 1 x block flange for measuring and control technology On the shell: 1 x access door approx. 870 x 1,960 mm Various pipe support brackets for the filling pipe 1 x filling pipe DN 80 1 x nozzle for level indicator Otherwise, as per the images and drawing.

Year of construction: 2019, condition: ready for operation (used), Output: 50-300kg/h, operational hours counter: 10h, with edge trim extraction. Dwjdpfx Aep Du Aajlbsb

Condition: ready for operation (used), Filling material: powder/granulates, bag types: valve bag, filling weight range: 25kg-50kg, max. bagging capacity: 300 bags/h. The machine was used for packing sand. An on-site inspection is possible. Dwjdpfxown H Uqj Albob

Condition: used, machine/vehicle number: 8799, Inlet: 400 x 800 mm Rotor diameter: 400 mm Width: 800 mm Rotor blades: 5 Stator blades: 2 Dwedoyr I Hbepfx Albjb Drive: 45 kW Sprue mill, granulator, plastic mill, cutting mill

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross section: 800 x 820 mm ZHS 1100 - 37 kW Djdpeyr I Irefx Albewb Rotor diameter: 400 mm Working cross section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 2,480 x 1,550 mm ZHS – economical all-rounders The ZHS series features a load-dependent, hydraulically actuated pusher that feeds material horizontally to the rotor in a slightly inclined position. The material is cut between the rotor and stator blades until it passes through the screen, which is bolted and mounted underneath the rotor. The interchangeable screen determines the final particle size. The shredded material can be discharged via conveyor belt, discharge screw, or pneumatically using an extraction system. The ZHS single-shaft shredders are designed for light to medium-duty applications in the plastics industry. Technical details: • Roller-mounted hydraulic pusher with horizontal movement • Bolted knives and knife holders • Optional segmented floor for particularly thin parts and materials • Rotor aggressiveness can be reduced or increased by bolting in filling pieces • Can be integrated in a two-stage system with a granulator as a pre-shredder

Condition: used, machine/vehicle number: 11552, Rotor diameter: 2 x 150 mm (duplex rotor) Rotor width: 200 mm 2 x 12 rotor blades 2 + 1 stator blade Dsdpfxeyr Tlce Albjwb Inlet cross-section approx. 350 x 200 mm Drive motor 15 kW The counter-rotating cutting rotors of the SM Duplex ensure good feeding performance for bulky, thin-walled parts and lightweight hollow bodies. The granulator can be used as a central granulator or as a stand-alone granulator on an injection molding or blow molding machine. This makes it suitable for shredding sprues or rejects that arise, among other things, during machine start-up.