Used Granulator for sale (636)

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Nedpfx Abezmdlnewewi Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. The system is available at short notice!

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan Nwodpfxszmdk Rs Abwsi • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. Nwodpszmdiajfx Abwji The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: new, Year of construction: 2026, The most powerful centrifugal fan FAN5500 reaches a capacity of up to 8000m3/h. The high vacuum created by the blade system at the right angle and the high motor power can cope with the toughest jobs.Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been created. The design of a new technological line allowed us to create the LineWind metal turbine system. This is the most important feature of the centrifugal fans, enabling them to extract all kinds of pollutants with increased vacuum power thanks to a special blade system that has been profiled at the right angle. The centrifugal fan was developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Radial fans are used for: transport of shavings, sawdust, small granulates dusty air local exhaust ventilation drying systems dehumidifiers Multi-vane metal rotor! High efficiency ensured by a balanced impeller Thermal winding protection (thermal sensor). The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee a stable and vibration-free operation of the unit. An emergency shutdown button meets the requirements of the PN-EN ISO 12100 and PN-EN ISO 13850 standards. Nwodpfovughlsx Abwsi An additional advantage is the use of branded flexible and resistant seals in sensitive areas, allowing high vacuums to be achieved without losses at individual connection points. Reliability confirmed by Polish users who enjoy working with our machines every day. Technical specifications MAX. AIR CAPACITY 8000 m3/h inlet diameter 300 mm discharge diameter 250 mm ENGINE SPEED 2850 rpm DIMENSIONS 670 x 600 x 600 mm MOTOR POWER / VOLTAGE 5.5 kW/400 V WEIGHT 55 kg

Condition: new, Year of construction: 2026, The centrifugal fan allows for operation with increased vacuum power to extract various types of pollutants, thanks to a special blade system which has been profiled at an appropriate angle. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Thanks to the many years of experience of our CORMAK team, radial fans of the FAN series were created. Designing a new technological line allowed us to create the LineWind metal turbine system. This is the most important feature of the centrifugal fans, enabling them to extract all kinds of pollutants with increased vacuum power thanks to a special blade system that has been profiled at the right angle. The centrifugal fan was developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Njdpfx Abovugg Uowewi Radial fans are used for: transport of shavings, sawdust, small granulates dusty air local exhaust ventilation drying systems dehumidifiers Multi-vane metal rotor! High efficiency ensured by a balanced impeller Thermal winding protection (thermal sensor). The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee a stable and vibration-free operation of the unit. An emergency shutdown button meets the requirements of the PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded flexible and resistant seals in sensitive areas, allowing high vacuums to be achieved without losses at individual connection points. Reliability confirmed by Polish users who enjoy working with our machines every day. Technical specifications MAX. AIR CAPACITY 4000 m3/h inlet diameter 200 mm discharge diameter 180 mm ENGINE SPEED 2850 rpm DIMENSIONS 575 x 550 x 500 mm MOTOR POWER / VOLTAGE 2,2 kW / 400 V WEIGHT 35,5 kg

Condition: new, Year of construction: 2026, The most powerful centrifugal fan, the FAN5.5, achieves a capacity of up to 7419 m3/h. The design of the new technology line has enabled us to develop the LineWind metal turbine system. This is the most important feature of the radial fans, enabling them to extract all sorts of pollutants with increased vacuum power, thanks to a special blade system that has been profiled at an appropriate angle. The Radial Ventilator can transport air chips sawdust dust and other substances such as smoke or harmless gases. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. Nwedsvugh Espfx Abwji APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of shavings, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 7419 m3/h inlet diameter 300 mm discharge diameter 250 mm PRESSURE 2014 - 1320 Pa DIMENSIONS 750x750x830 mm MOTOR POWER / VOLTAGE 5.5kW WEIGHT 110kg

Condition: new, Year of construction: 2026, The fan, created on the basis of a radial impeller blade system, is designed for handling waste generated during wood processing. The high vacuum and high motor power ensure a constant underpressure. Thanks to the many years of experience of our CORMAK team, FAN series radial fans were created. The design of the new technological line has allowed us to create a LineWind metal turbine system. This is the most important feature of radial fans, allowing with increased vacuum power to draw off various types of pollutions to a special blade system that has been profiled at the right angle. The radial fan was created for use in the carpentry, furniture, car, agricultural and manufacturing industries. Advantages: radial fans are using for: - transport of shavings, sawdust, small granules - dusty air - local exhaust - drying systems - air dryers multi-blade, balanced, low noise and high efficiency, metal rotor winding overload thermal protection (thermal sensor) Nwodpfx Abjvuggbswji anti-vibration, stabilising feet safety swith conformant withthe N-EN ISO 12100 and PN-EN ISO 13850 norms it is also includes flexible and durable gaskets in the most vital locations failure-free operation confirmed by users of our machines working with them every day CAPACITY MAX. 3000 m3/h INLET DIAMETER 150 mm OUTLET DIAMETER 150 mm ROTATIONS 2850 obr/min DIMENSIONS 575 x 510 x 500 mm MOTOR POWER/VOLTAGE 1,5 kW/400 V WEIGHT 32,5 kg

Condition: new, Year of construction: 2026, Thermal winding protection against overload. The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee stable and vibration-free operation of the unit. The most powerful radial fan FAN11 achieves an output of up to 15445 m3/h. The Radial Ventilator can transport air chips sawdust dust and other substances such as smoke or harmless gases. It is widely used for ventilation in industrial lumber companies, carpentry, mining, large buildings, hotels, restaurants, etc. Thanks to its design and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation . The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials Nwedpfovugfwox Abwsi transport to dehumidifiers and drying systems. carpentry - transport of chips, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities

Condition: new, Year of construction: 2026, Thanks to the many years of experience of our CORMAK team, FAN series radial fans were created. The design of the new technological line has allowed us to create a LineWind metal turbine system. This is the most important feature of radial fans, allowing with increased vacuum power to draw off various types of pollutions to a special blade system that has been profiled at the right angle. The radial fan was created for use in the carpentry, furniture, car, agricultural and manufacturing industries. Advantages: radial fans are using for: Nwodpfjvuqyrsx Abwei - transport of shavings, sawdust, small granules - dusty air - local exhaust - drying systems - air dryers multi-blade, balanced, low noise and high efficiency, metal rotor winding overload thermal protection (thermal sensor) anti-vibration, stabilising feet safety swith conformant withthe N-EN ISO 12100 and PN-EN ISO 13850 norms it is also includes flexible and durable gaskets in the most vital locations failure-free operation confirmed by users of our machines working with them every day CAPACITY MAX. 7500 m3/h INLET DIAMETER 250 mm OUTLET DIAMETER 250 mm ROTATIONS 2850 obr/min DIMENSIONS 670 x 600 x 600 mm MOTOR POWER/VOLTAGE 4,0 kW/400 V WEIGHT 53 kg

Condition: new, Year of construction: 2026, Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been developed. The most powerful centrifugal fan FAN7,5 reaches a capacity of up to 10562 m3/h. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Product characteristics: The Radial Fan can transport air whirl sawdust dust and other substances such as smoke or harmless gases. It is widely used for ventilation in industrial lumber companies, carpentry, mining, large buildings, hotels, restaurants, etc. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of chips, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 10562 m3/h inlet diameter 340 mm outlet diameter 350 mm PRESSURE 2554 - 1673 Pa DIMENSIONS 810x900x980 mm MOTOR POWER / VOLTAGE 7.5 kW Njdpovugrdsfx Abwjwi WEIGHT 125 kg

Condition: new, Year of construction: 2026, KDP350 Cabinet Sandblaster is an efficient surface treatment and cleaning machine for metal components, designed for professional workshops, industrial facilities, and refurbishment services. The 330-liter working chamber and two side doors with full-seal gaskets ensure convenient access and dust-free operation. The set includes a DC15 cyclone dust extractor, which effectively removes dust generated during operation. This unit is ideal for sandblasting wheels and other metal parts requiring precise cleaning. Key Features of the KDP350 Sandblaster Large working chamber – 330 liters capacity allows processing of larger components. Two side doors – on the right and left sides for easy loading and part handling. Dust-free operation – thanks to sealing gaskets and extraction ports (63 mm and 90 mm). Gun with ceramic nozzles – includes 4 interchangeable tips (4, 5, 6, 7 mm) for precise blasting. Illuminated work area – improves visibility and accuracy during operation. Integrated gloves – abrasion-resistant and protect the operator’s hands. Compatible with various abrasives – such as quartz sand, glass beads, silicon carbide, emery, and plastic granules. Standard Equipment DC15 cyclone dust extractor with filter and hose 12V fluorescent lamp (powered by 230V, with switch) 2 integrated rubber gloves Blasting gun with 4 ceramic nozzles (sizes: 4, 5, 6, 7 mm) 4 protective films for the viewing window 2 dust extraction ports: 63 mm and 90 mm diameter 2 side doors with full-circuit sealing User manual in Polish Technical Specifications of the KDP350 Sandblaster Specification Value Working capacity 330 L (0.33 m³) Operating pressure 4 - 8 bar Air consumption 400 - 700 l/min Air inlet 1/4" quick coupling Viewing window area 580 x 270 mm Doors 2 pcs (left and right sides) Dust extraction ports Ø63 mm and Ø90 mm Nwodpfxjw H N R Ss Abwsi Internal dimensions 890 x 655 x 360/610 mm External dimensions 960 x 720 x 1500 mm Weight 88 kg Note: The machine is delivered in parts and requires self-assembly according to the included manual.

Condition: like new (used), From the liquidation of a company's inventory, we offer the following: 25 kg Jowat 256.70 hot melt adhesive granules Manufactured on: 2023/02/26, total of 51 pieces, 25 kg per bag 25 kg Jowat 288.10 hot melt adhesive granules Manufactured on: 2024/09/27, total of 30 pieces, 25 kg per bag 25 kg Jowat 287.15 hot melt adhesive granules Manufactured on: 2024/09/27, total of 40 pieces, 25 kg per bag Nedpeznuw Rsfx Abwjwi 9 bags, packaging 600 kg, loose 236.32, Manufactured on: 2025/01

Condition: excellent (used), functionality: fully functional, total height: 16,250 mm, outer diameter: 3,550 mm, 5 x 125 m³ aluminum storage silo with a wide base (plastic granulate silo) Technical data / Dimensions Available quantity: 5 Volume: approx. 125,000 liters Container type: Silo Condition: used Food grade: no Design: vertical Internal diameter: approx. 3,500 mm External diameter: approx. 3,550 mm Cylindrical height: approx. 15,000 mm Overall height: approx. 16,250 mm Weight: approx. 2,500 kg Specific gravity of the medium: 1 ton/m³ Operating pressure: non-pressurized Wall thickness, bottom: approx. 5.5 mm Wall thickness, top: approx. 5.0 mm Wall thickness, shell / cylinder: approx. 3.5 - 5.5 mm Ground clearance: approx. 500 mm Material / Properties Material, inner shell: Aluminum Internal welds ground smooth Notes: Material: AlMg3 / AlSi Equipment Base design: base ring/wide base Quantity: 1 Mounting: fixed Bottom type, top: conical bottom Bottom type, bottom: cone Cone angle: 90 degrees Top: 1 x roof edge railing, height: approx. 1,200 mm 1 x walkway with platform 2 x crane eye 1 x manhole DN 500 with safety grid 1 x flange DN 100 (filling line) 1 x flange DN 300 (level measurement) 1 x threaded socket for Max sensor 1 x flange DN 100 (filling) 1 x vent DN 200 with hood Nodoznn Ntjpfx Abwjwi Shell: 1 x service access door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100, ending in a TW connection 1 x threaded socket 1 1/2" for empty indicator Bottom: The silos end at the bottom in a 90° cone with a flange DN 150 with emergency shut-off valve and suction box. Fittings available Notes: A matching access ladder (two-section) can be optionally purchased (additional cost: €1,500 plus VAT). The measuring and control technology installed on the silo will be supplied free of charge. However, no guarantee can be given for its perfect functioning.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Nedpfoznkx Dox Abwjwi Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2001, condition: good (used), For sale: an industrial twin-screw extruder, Werner & Pfleiderer ZSK 133, now known under the Coperion brand. This machine is designed for processing and compounding plastic materials, especially PP granules, polyolefins, masterbatches, filled, and modified materials. Nwodpfxozc I Igo Abwei The extruder was manufactured in 2001 and purchased used in 2015 in working condition. However, it has not been used in our production since the purchase. It has been idle since then and is being sold due to lack of use. Key specifications: capacity up to 4 t/h, main electric motor 1100 kW, voltage 690 V, frequency 50 Hz, motor speed 1492 rpm, screw speed up to 400 rpm, maximum pressure 200 bar, heating power 137 kW, 6 heating zones, dimensions 3535 × 900 × 500 mm. The extruder includes a melt pump, an underwater granulator with a die and a set of knives, a cooling system for a water bath, an oil unit with electric heaters for heating the granulation die, and hydraulic units for operating and locking the shears. Suitable for factories involved in compounding, PP granule production, masterbatch production, regranulation, and processing of large volumes of plastic.

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system with a screw conveyor is an efficient industrial setup designed to process large volumes of materials into smaller, more manageable pieces. ♻ The system consists of a powerful shredder capable of breaking down various materials and a screw conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal. Technical data: Shredder: ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 939 x 567 mm ✔ Weight: 1250 kg Nsdpfx Aotpuqyjbwewi Screw/snail conveyor: ✔ Length: 4300 mm ✔ Height: 2800 mm ✔ Power: 1,5 kW 1 years warranty or 1000 working hours

Year of construction: 2003, condition: ready for operation (used), A complete central plastic granulate drying and conveying system Werner Koch, which was extensively expanded and modernized in 2021, is available. 1) Koch CKT 300 dry air dryer, year of manufacture: 2003, power: 41kW, air capacity: 300m³/h. 2) Koch CKT 500 dry air dryer, year of manufacture: 2021, power: 51kW, air capacity: 500m³/h, control system: Siemens S7. 3) 26x drying hoppers, volume: 11x40l, volume: 13x100l, volume: 2x150l. 4) 38x machine hoppers. 5) 2x Busch vacuum pumps. 6) Automatic Koch Navigator material distribution system, inputs: 26, outputs: 38. Including control cabinets and a central visualization and monitoring system Supervisione 9-7000. Documentation available. An on-site inspection is possible. Nwedpjzmyl Djfx Abwei

Condition: excellent (used), Year of construction: 2020, operating hours: 12,436 h, functionality: fully functional, machine/vehicle number: 254633, clamping force: 500 kN, screw diameter: 30 mm, We offer this very well-maintained Arburg ALLROUNDER 320 C 500 - 170 machine, manufactured in 2020, including an integral picker. - Golden Edition model with SELOGICA direct control - Clamping plate set with central injection position and centering diameter of 125 mm - Plasticizing cylinder set 30 mm (without nozzle) - Open nozzle 30 mm with internal thread M 24 x 1.5 Nwedezmvi Eepfx Abwei - Granulate container, stainless steel, 50 l The machine is in very good condition and is being sold from current production. Loading and transport are not included in the price and are the responsibility of the buyer. Collection is possible from September 2026. Machine location: 47574 Goch If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 16951-3.3, input voltage: 400 V, overall weight: 22,000 kg, input frequency: 50 Hz, We offer this used Eldan Recycling HR162T-33 machine, ELDAN HR 162T-33 model, manufactured in 1999. Year of manufacture: 1999 Power: 162 kW Weight: 22000 kg Serial number: 895153 Voltage: 3 x 400 V Frequency: 50 Hz For sale is an industrial ELDAN Granulator 160 (year of manufacture 1999), designed for shredding rubber in recycling processes. The machine comes from a complete tire recycling line and is in very good technical condition. THERE IS AN OPTION TO PURCHASE THE COMPLETE LINE. Nsdpjzmvclefx Abwowi Application: rubber granulation, tire recycling, rubber granulate production, material preparation for further separation. Advantages: renowned manufacturer ELDAN Recycling, robust industrial design, designed for continuous operation, high reliability, easy integration with existing production lines. The granulator can be sold separately or as part of a complete tire recycling line available in our offer. Inspection possible after prior arrangement. We provide assistance with loading. Additional photos, videos, and technical documentation are available upon request. Incoterms: EXW – Poland ELDAN GRANULATOR 160 – INDUSTRIAL RUBBER GRANULATOR ELDAN Granulator 160 (Year of manufacture: 1999) for sale. Industrial granulator designed for rubber size reduction and tire recycling applications. The machine comes from a complete tire recycling plant and is in very good technical condition. Applications: Rubber granulation Tire recycling Rubber granulate production Material preparation for further separation Key Features: Manufactured by ELDAN Recycling Heavy-duty industrial construction Designed for continuous operation Reliable and easy to integrate into existing recycling systems The granulator can be sold separately or together with the complete tire recycling line also available for sale. Inspection is possible by appointment. Loading assistance is available. Additional photos are available upon request. Incoterms: EXW – Poland

Year of construction: 1999, condition: used, functionality: fully functional, machine/vehicle number: 010325, COMPLETE TYRE RECYCLING LINE – SATURN / ELDAN A complete industrial tyre and rubber recycling line from reputable manufacturers Granutech Saturn and Eldan Recycling is for sale. The installation is sold as a complete, ready-to-dismantle and re-commission technological line. The line includes: SATURN 52-32 HT – industrial primary shredder (Heavy Duty Shredder) SATURN / ELDAN GRIZZLY 80 – secondary shredder ELDAN Granulator 160 – year of manufacture 1999 complete set of belt conveyors inter-stage conveyors 2 magnetic separators for steel recovery vibrating tables and material separation system discharge conveyors complete set of original control and electrical cabinets complete line control automation system Nsdpfjzmucqex Abwswi Applications: recycling of car and truck tyres rubber shredding steel recovery production of rubber granulate Advantages: complete technological line machines from reputable manufacturers, Granutech Saturn and Eldan robust industrial design suitable for continuous operation transportation and re-assembly possible The machine can be viewed by prior arrangement. We provide assistance with dismantling and loading. Additional photos are available upon request. INDIVIDUAL MACHINES CAN BE PURCHASED SEPARATELY

Condition: good (used), Year of construction: 2002, functionality: fully functional, TECNOVA MINI / 60 repelletizing machine Type: ES 60 N / 35D DEG Year of manufacture: 2002, little used, completely refurbished in 2023. Availability: Immediately. Current condition: Can be viewed in operation. Nedpsw U Swpjfx Abwswi Screw: 60, L/D ratio: 35, Capacity: 120-140 kg/h, Feeding screw: yes, Degassing system: yes, Cutting head type: head cutter, Suitable materials: PE/PP/PS. Other specifications: 8 mm diameter granules, Moisture max. 3% Foil silo, capacity 2 m3, Vacuum pump for degassing, Temperature control panel, Pressure control, Water cooling, transport, Venturi, cyclone and pipes, Dimensions: 6.40 m long x 2.10 m wide x 4.30 m high Built-in power: 30 Kw. + film granulator Meccanoplastica Type 3140 (1998) !!! Price included!!! For sale with spare parts: screw barrel, heating elements, filter changer, head cutter insulation, knives for grinder, compactor, silo bearings, cyclone, head cutter.

Condition: excellent (used), 5 x aluminum silos standing on a foot ring (plastic granulate silos) - second-hand - designed for a bulk density of 0.6 kg/dm³ Technical data / dimensions Available quantity: 5 Volume: approx. 100,000 liters Container type: Silo Condition: used Design: upright External diameter: approx. 3,000 mm Cylindrical height: approx. 16,250 mm Total height: approx. 17,500 mm Specific weight of the medium: 0.6 to/m³ Material / composition Jacket material: Aluminum Features Nwsdpfx Abotq A Emjwji Stand form: Foot ring/stand frame Top base type: Conical base Gradient: approx. 15% Bottom shelf type: Cone Cone inclination: 90 degrees Top floor: 1 x DN 600 access dome with hinged lid and safety grille 1 x NW 200 ventilation nozzle with rain hood 1 x flange nozzle for Silopilot (level measurement) 1 x Block flange for full detector 1 x Roof edge railing with handrail 2 x crane eyes Jacket: 1 x access door 850 x 2025 mm 1 x filling pipe NW 80 with tangential entry into the silo, ending at the bottom in B-coupling at the bottom 1 x cable protection conduit (19 mm) 1 x connection piece for full detector Various openings in the frame shell for the passage of pipes The silo ends at the bottom in a 90° cone with an outlet flange DN 500 (outlet height: approx. 500 mm). Remarks: The currently connected measurement and control technology is included (if available). However, no warranty is given for their function! One of the silos has a two-pass access ladder with back protection and dwelling platform (surcharge: € 1,500 plus VAT). Otherwise according to pictures and drawing

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW Nwjdpfx Abszlbpzswei - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: new, Year of construction: 2024, Chopper knife 40 x 40 concave Knife for Weima, large size ... Suitable for almost all common shredders/granulators Available from stock in Bitburg Nodpfx Aebxu Dhjbwjwi Subject to prior sale

Condition: excellent (used), functionality: fully functional, Starlinger Extruder - Single-screw extruder - Screw diameter: 65 mm - Refurbished - Degassing zones Nwjdpfshgq Ahex Abwsi - Filter/screen changer - Die installed Data sheet, see photos. Optionally available with water bath & strand granulator, etc. If you have any further questions, please do not hesitate to contact us. Commissioning and testing can be arranged. Available for immediate delivery.