Used Zerma Granulator for sale (53)

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces The best features of the proven GST and GSC series have been integrated into a compact redesign, with particular emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths of 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material feed and prevents material jams. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine to reduce maintenance downtime. 98T8Mrx The highly tangential, curved rear wall of the cutting chamber combined with the aggressive open rotor design ensures reliable material intake and minimizes the risk of blockages. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling voluminous parts such as bottles, canisters and crates. Due to the low feed height, the machines can be easily fed with material by hand or a small conveyor belt. The low noise emission and small footprint make the granulator the perfect solution for inline shredding Optional rear wall with higher stator knife M version: The feed method with a higher stator blade is better suited for thicker-walled and more compact parts, such as injection-molded parts, profiles, sheets, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high-quality regrind is achieved regardless of the material type or shape, e.g. injection molded parts, profiles, plates, etc. Control system and control cabinet: The integrated control and control panel not only complies with all applicable safety regulations, but can also be adapted to specific requirements. In addition, peripheral equipment such as feed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available, which reduces power consumption during idle times and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 cyclone Rotor diameter (mm) 250 Rotor width (mm) 450 Kljdpfxeum Rnvj Ah Nsl Drive (kW) 7.5 Number of rotor blades 3 x 2 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 700 Feed opening (mm) 380 x 450 Opening feed option of the M version (mm) 295 x 450

Condition: excellent (used), Side mills Zerma Year of manufacture 2005 Kedjlvt Eqspfx Ah Noll Type: GSL -18AMIS)

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: GSE 30602103001, ZERMA shredder Type: GSE 300/600 + DUST CYCLONE Includes spare parts, knives, counter-knives. Like new, only used for a few hours Kledpfx Aevdkw Neh Nsl

Condition: used, machine/vehicle number: 13389, Rotor diameter: 390 mm Rotor width: 850 mm Rotor knives: 60 Kedsx Hlgpopfx Ah Noll Stator knives: 1 row Infeed cross-section approx. 1300 x 850 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 14003, Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3x2 Stator knives: 3 Feed opening approx. 300 x 600 mm Klodsx Aw Afspfx Ah Nsl Drive motor: 18.5 kW

Condition: used, Rotor diameter: 200 mm Rotor width: 270 mm Rotor knives: 3x6 Stator knives: 2 Feed opening approx. 200 x 270 mm Drive motor: 3 kW Kedpfxsxyax Rs Ah Nsll

Condition: used, machine/vehicle number: 4966, Rotor diameter: 200 mm Rotor width: 180 mm Rotor blade: 3x4 Kjdjxyax Depfx Ah Njll Stator knives: 2 Inlet cross-section approx. 200 x 180 Drive motor: 3 kW

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 7185, Zerma single-shaft shredder with hopper cover Klsdpfoxzrzmsx Ah Njl

Condition: used, machine/vehicle number: 13047, Rotor diameter: 500 mm Rotor width: 600 mm Rotor blades: 5 Kedjwbwtdjpfx Ah Nell Stator knife: 2 Inlet cross-section approx. 500 x 600 mm Drive motor: 55 kW

Condition: used, machine/vehicle number: 13253, Rotor diameter: 800 mm Rotor width: 1200 mm Rotor knives: 7 rows Stator knives: 3 rows Inlet cross-section approx. 1200 x 800 mm Kjdpfx Ajxqr T Ioh Noll Drive motor: as per customer request

Condition: new, Year of construction: 2021, operating hours: 4 h, functionality: fully functional, machine/vehicle number: ZSS8501604002, overall weight: 4,290 kg, rotor diameter: 387 mm, number of blades: 40, rotor length: 850 mm, rotor width: 457 mm, power: 40.75 kW (55.40 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, rotational speed (min.): 74 rpm, year of last overhaul: 2025, sieve perforation: 60 mm, warranty duration: 6 months, input voltage: 400 V, Single-rotor shredder ZERMA ZSS 850-E 37 kW Hopper opening (mm): 1340 x 840 mm Usable cutting chamber: 690 x 730 mm Rotor diameter x width (mm): Ø 387 x 850 mm Rotor speed: 80 rpm Rotor model: E SEW oil-bath gearbox: Included Number and size of knives: 40 / 34x34x22 mm Knife holders with bolts: Included Number of counter-knives: 1 row of 3 IE3 motor power: 37 kW Screen perforations: > 40mm (to be specified) Hydraulic screen opening: Included Discharge height: 560 mm Connected electrical power: 400 V +/- 5% / 50 Hz Klodsxtp Diepfx Ah Njl Hydraulic pusher power: 3.6 kW Hydraulic pusher with 2 speeds: Included Adherent front plate (ram): Included Air/Oil heat exchanger mounted on hydraulic tank Overall length: 2085 mm - Overall width: 1940 mm - Height: 2435 mm Approximate weight (kg): 4400 kg Control cabinet with SIEMENS PLC and settings menus such as: Recipes, Maintenance, Alarms, etc. Cable length to control cabinet: 5 meters See technical datasheet and/or attached diagram for more details.

Condition: used, machine/vehicle number: 13386, Rotor diameter: 800 mm Kodpfjxgi Sysx Ah Nsll Rotor width: 1200 mm Rotor knives: 7 Stator knives: 3 rows Infeed cross-section approx. 1200 x 800 mm Drive motor: 132 kW

Condition: used, machine/vehicle number: 12979, Rotor diameter: 300 mm Rotor width: 200 mm Klsdexgi Saspfx Ah Nsl Rotor knives: 3 Stator knives: 3 Infeed opening approx. 220x320 mm Drive motor: 5.5 kW

Condition: used, machine/vehicle number: 13298, Rotor diameter: 750 mm Rotor width: 1500 mm Rotor blades: 76 Stator blades: 1 row Klodswqyh Aopfx Ah Njl Inlet cross-section approx. 1500 x 1500 mm Drive motor: 2 x 45 kW

Condition: used, machine/vehicle number: 13299, Rotor diameter: 750 mm Rotor width: 1500 mm Rotor blades: 76 Stator blades: 1 row Inlet cross-section approx. 1500 x 1500 mm Klodpjwqyh Nofx Ah Nel Drive motor: 2 x 45 kW

Condition: used, machine/vehicle number: 12677, Rotor diameter: 400 mm Rotor width: 600 mm Kedpfx Ask Tuxdjh Noll 3-knife rotor 2 rows stator knives Inlet cross section approx. 600 x 660 mm Drive motor: 30 kW

Condition: new, Rotor diameter: 300 mm Rotor width: 600 mm Kjdpfowfig Dex Ah Nsll Rotor blades: 3 x 2 Stator blades: 2 Inlet cross-section approx. 300 x 600 mm Drive motor: 18.5 kW

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. Klsdpfx Aeghgbhoh Nol The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case.

Condition: new, machine/vehicle number: Baureihe PM / Neumaschine, The impact disc mills (fine mills) of the PM series are high-speed centrifugal mills for fine grinding of almost all thermoplastics. Typical tasks are the fine grinding of regrind or primary material from profile, pipe or sheet extrusion. In addition, these mills can be used in the food, chemical and pharmaceutical industries. Kljdpfoghgb Nsx Ah Njl The material is centrally fed by the stationary grinding disc with dosing element. Fine grinding takes place between the rotating and stationary grinding discs. The material is discharged by means of pneumatic suction.

Condition: new, ZERMA single shaft shredders of the ZPS series have universal application possibilities. They are suitable for shredding heavy and massive parts that cannot be directly shredded on a granulator. The large and heavy rotor of the shredder series ZPS , the low rotor speed as well as the high torque ensure low current peaks and thus avoid high energy costs. Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the task, the shredded material can be used directly in the manufacturing process, or it can be subsequently ground in a granulator. The shredders from the ZPS series are equipped with a 2-step hydraulic system that prevents the rotor from blocking. Knives and knife holders are completely screwed into the rotor. Generously dimensioned, externally located rotor bearings and a hydraulically swivelling screen basket are part of the standard equipment of every shredder. Kjdsghgdnspfx Ah Nsll The machines can be extended or upgraded with numerous options, such as rotor cooling or Hardox wear armouring. Compared to the ZSS shredders, the machines of the ZPS series have a higher contact pressure device, which optimises the acceptance behaviour between the pusher and the rotor, especially with large-volume parts or pipes.

Condition: new, ZXS 1500 – 2x75kW – Working cross-section: 1500 x 1490mm ZXS 2000 – 2x90kW – Working cross-section: 1500 x 1900mm ZXS 3000 – 2x110kW – Working cross-section: 1500 x 2700mm ZXS series: The single-shaft shredder for demanding shredding tasks. The machines are extremely robust and achieve high throughput rates. Working widths from 1500 to 3000 mm and rotor diameters of 750 mm are available as standard. Wide range of applications for the ZXS series: Ksdpfjghgdyjx Ah Noll Many other materials can be shredded with the ZXS series and prepared for recycling, such as: B. Old cables, PET bottles, paper and cardboard, etc. Get advice on how your material can be shredded and recycled.

Condition: new, General: Kljdoghgd Djpfx Ah Nol The single shaft shredders of the ZTS-/ZTTS-series have been specially developed for the shredding of whole or pre-shredded tyres. Both the ZTS and ZTTS shredders have a large rotor diameter of 760 mm and working widths of 1500 to 3000 mm. Both types are equipped with oversized external bearings and double drives. The tangential infeed ensures optimum feeding of the input material without the need for an additional hydraulic pusher. All tyre shredders have special wear protection in all relevant machine areas. ZTS and ZTTS differ in the number of rows of stator knives and in the screen perforation installed. Applications: Machines of the ZTS series have one stator knife row and are therefore used for the first stage in the pre-shredding of car tyres or other large, solid parts to a final fineness of approx. 150 mm. For the second stage a ZTTS shredder is used, which grinds the material to approx. 20 mm. The well thought-out machine design together with the adjustable blade gap allow an optimal separation of rubber and steel fractions. In a further stage, the steel fractions can be separated via a strong magnetic separator.

Condition: new, The Zerma ZCS Shredder integrates leading shredder and granulator technology into a single compact unit. With the development of the shredder and granulator combination, ZERMA has successfully continued the expansion of its product portfolio. By combining the proven design and high torque of the single shaft shredder with an extremely effective granulator, ZERMA can deliver a reliable and compact pre-shredding system. The shredder and the granulator are driven individually, which contributes to better control of the whole process. To increase the efficiency, ZERMA Smart Drive System is used to constantly control the load and adjust the amperage accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where predictable quality in size reduction and granulation is required. Klodsghgd Sspfx Ah Njl Typical applications include, but are not limited to, the following: Injection Molding Thermoforming Blow molding Recycling Extrusion Waste

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economical cutting mills: This GSE series is ideal for all injection molding and blow molding companies. It is basically suitable for all thin-walled plastic waste. These cutting mills are characterized not only by their low purchase price, but also by their robust, split steel/welded housing, the easy cleaning option and easy blade and screen changes. Thanks to the tangential housing geometry in conjunction with V-cut rotors (except GSE 300/300), even bulky and large-volume feed parts are accepted and shredded by the rotor. Kljdpfxjghgbts Ah Nel Grinding material transport: The cutting mills are equipped with an extraction system and bagging station as standard. A grinding material collection container is also available as an option, which, like the extraction tray, is made of stainless material.

Condition: new, GENERAL Typical of the single-shaft shredders in the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their welded steel construction. The rotor diameter is also generously dimensioned at 457 mm. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: drive via an oversized gearbox, reversible blades, screwed blade holders, robust, external bearings, hydraulic screen basket, easy handling and technically sophisticated control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies: IBCs, garbage cans, pallets, rain barrels, etc. The machine can also be used universally for countless applications in the plastics and wood industries. Like all Zerma shredders, the machines in the ZIS series can also be equipped with various wear options. ADVANTAGES 35% larger grinding chamber volume compared to the ZSS series Internal hydraulic slide Increased slide speed in the return movement Compact dimensions Kedpfxeghgdvo Ah Nsll Knife holders screwed into rotor pockets