Used Granulators for sale (633)

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Credoxxk Akopfx Ab Tjk With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: ready for operation (used), Specifications of NEUE Herbold SB 60/145 S7-3 Motor Power: 70kw Feed Opening: (approximately 620 mm x 565 mm) Rotor Configuration: 5-knife open rotor staggered Bed Knives: 2 Installed Screen: 3/16" (approximately 4.76 mm) Codpfx Absw R Un As Tork Additional Equipment: Control panel with soft-start feature Voltage: 460V / 3-phase / 60 Hz Extras: Includes seven extra screens We supply a wide range of granulators designed for plastics recycling, manufacturing, and waste reduction. Whether you need compact units for light-duty use or heavy-duty machines for high-output production, we have the right solution.

Condition: used, machine/vehicle number: 11627, Rotor diameter: 220 mm Rotor width: 160 mm Rotor blades: 3 Stator knife: 2 Inlet cross-section approx. 400x400 mm Cedpowbwuusfx Ab Tjrk Drive motor: 6.5 kW

Condition: new, Year of construction: 2025, We offer industrial knives for shredders from brands such as Weima, Vecoplan, Lindner, Untha, and 3E Machinery. We also supply knives for granulators from brands like Zerma, Weima, Tria, Herbold, and Rapid. Our range includes both rotor knives and stationary knives. A large selection of knives is available from stock. We also manufacture custom knives based on provided documentation (technical drawings). Fast turnaround times and top-quality workmanship. Feel free to contact us! Csdpfjwybrzjx Ab Tsrk

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Crjdpfx Aexxky Aob Tek Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, machine/vehicle number: 12659, Rotor diameter: 300 mm Csdpfjk Tuxljx Ab Terk Rotor width: 500 mm 3-knife rotor 2 rows stator knives Inlet cross section approx. 500 x 490 mm Drive motor: 22 kW

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Cedpfexxkvkox Ab Tsrk Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Credpfxoxxkuys Ab Tok Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Csdpfx Aoxgrdfjb Tsrk Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Codpfjxgthlsx Ab Terk Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw

Condition: used, Manufacturer CONDUX Model CS 450/600-2 Hollow body granulator and secondary granulator for pre-shredded material Rotor: 450 mm diameter x 600 mm working width 5 rotor blades (angled cut), 2 stator blades Credpoxgtl Rofx Ab Tsk Drive motor 22 kW

Condition: used, Cutting mill Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Crjdpfsxgthrox Ab Tsk Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, power: 160 kW (217.54 HP), Cutting mill TRIA 120-80 FN / Cutting mills New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 7x2 Stator knives: 2x2 Rotor diameter: 700 mm Csdpsxgrfvofx Ab Tork Rotor width: 1200 mm Inlet: 800 x 1200 mm

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Crjdpjxgtgnjfx Ab Tsk Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Cutting mill / Cutting mills Cedexgth Eopfx Ab Tjrk Manufacturer: HERBOLD Meckesheim GmbH Type: SMS 45/60 Heavy-duty series Infeed opening 600 x 680 mm Drive motor 75 kW

Condition: used, HERBOLD granulator type SMS 60/100 Heavy version Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width (optionally as open 3- or 7-blade rotor) Cedpfx Aoxgtm Ujb Tork Drive motor 110 kw Folding device with electric winch

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new blades, new bearings Drive: 160.0 kW Rotor knives: 7x2 Crjdpfexgtqaox Ab Tsk Stator blades: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Inlet: 800 x 1200 mm

Condition: used, Cutting mill / cutting mills Crodpfxjxgq Uco Ab Tjk Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Cjdpfoxgtthsx Ab Tork Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Cedsxb Aggepfx Ab Terk Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Granulator / Granulators Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. With base frame including vibration dampers. Crjdpfjxb Adlsx Ab Tek Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 25 mm, TECHNICAL DETAILS Screw diameter: 2 x 25.0 mm L/D: 40:1 Credpfoxx Uk Esx Ab Tek MACHINE DETAILS Total power: 12.0 kW EQUIPMENT Platform 4-way dosing system from Brabender Scholz dosing control Easytouch (year of manufacture 2009) 1x side feeder Degassing Strand die Water bath by Collin Scheer granulator SGS 50-ET

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers Csdpsxzfwbofx Ab Tsrk - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: used, Comprehensively tested, used stainless steel Aeromatic Fielder model GP1 VP mixer / granulator. Manufacturer: Aeromatic Material: Stainless Steel Capacity: 10 litres Type of Blades: Bottom entry 3-blade mixer with drive, and a side entry chopper. Csdpfsx Db Izsx Ab Tjrk Also includes: Jacketed removeable bowl and local controls. Various inserts to reduce bowl capacity. Unit is mounted on mobile base.

Condition: used, Used Cumberland Model 15x24 granulator. Unit has a 15" x 24 " feed throat with hopper. Unit has a bed cutting chamber, the rotor is an open 3-blade with the 2 bed knives and 3 rotor knives driven by 50HP, 1475rpm motor. Crjdpfox Db Ibjx Ab Tsk Weight: Estimated: Kg1000.0 Dimensions: 1400mm X 1900mm