Used Shredding for sale (824)

Condition: excellent (used), Year of construction: 2000, operating hours: 10,900 h, functionality: fully functional, overall weight: 16,000 kg, power: 308 kW (418.76 HP), Willibald MZA 3500 / Shredder / Chipper / Crusher • Manufacturer: Willibald • Type: MZA 3500 • Year of manufacture: 2000 • Operating hours: 10,900 hours • Engine: MAN D 2876, 6-cylinder diesel • Power: 308 kW / 418 hp • Inlet opening: 500 mm • Number of axles: 2 tandem axles • Braking system: Air pressure • Number of cutting blades: 48 • Rotor speed: 1300 rpm • Drawbar: 40 mm • Fiberizing of organic material for composting, up to a diameter of 30 cm • Shredding of old wood and waste wood, up to a diameter of 30 cm • Total weight: 16,000 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, Kledpfjzdtzmsx Aftsw - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm • Swinging hammers • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) • Capable of reducing waste wood and used timber up to a diameter of 30 cm • Number of axles: 2 tandem/dual axles • Brake system: Air brakes Kedpfxoxu Dipo Aftjlw • Towing eye: 40 mm • Total weight: 8,960 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. Kodpfxozl Shzs Aftjlw • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm Kjdpfxsh Di H De Aftelw -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

Condition: new, Year of construction: 2025, power: 60 kW (81.58 HP), ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in one compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Kodpfev I S T Tjx Aftjlw Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Condition: new, Year of construction: 2025, power: 60 kW (81.58 HP), ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in one compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Kodpfxov I Tuxe Aftolw Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Year of construction: 2025, condition: new, ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with a hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in a single, compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions Klsdpjv I S U Rjfx Aftow

Condition: ready for operation (used), Year of construction: 2008, operating hours: 11,655 h, functionality: fully functional, machine/vehicle number: 11421, COMPLETE CONFIDENTIAL DOCUMENTS SHREDDING & BALLING PLANT Built by: - sorting table - infeed belt conveyor 8000x1000 mm; including infeed belt conveyor - VECOPLAN shredder VAZ1300MK; includes screen according to actual confidential shredding DIN norm - Outfeed combined screw and chain conveyor, conveying to the press baler - press baler IMABE H-80/50 - Dust exhaust & filtering system Kjdpfozhu Atox Aftelw - Electrical cabinet for fully authomatic operation Includes: - Full internal cabling - Machines revised with new wear parts for the shredder - Dismantled - Loading into trucks

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,703 h, functionality: fully functional, machine/vehicle number: Bau Nummer 443, overall weight: 30,000 kg, total width: 2,500 mm, transport width: 2,500 mm, year of last overhaul: 2025, We offer this refurbished Doppstadt DW-3060 K single-shaft shredder, manufactured in 2019. Telematics active until 06/2028 Kledpfjzhlpwex Aftow All bearings and all conveyor belts are original, new Doppstadt parts All wear parts are original, new Doppstadt parts Manufacturer: Doppstadt Model: DW-3060 K Year of manufacture: 2019 Condition: refurbished Category ID: 2097 Type ID: 2590 Machine type: Single-shaft shredder If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2454320049, overall weight: 130 kg, total width: 660 mm, total length: 660 mm, total height: 980 mm, power: 1.5 kW (2.04 HP), input voltage: 230 V, cutting width (max.): 420 mm, Cardboard shredder for recycling cardboard and producing void fill material (cardboard mesh). Includes AL-KO extraction unit. Easy adjustment of the cardboard mesh width via a movable stop. Regardless of the width of the cardboard to be shredded, cardboard mesh of uniform width is always produced. Kjdpfxjy Dqvdj Aftslw

Condition: ready for operation (used), Year of construction: 2021, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 34, fuel tank capacity: 300 l, conveyor belt length: 6,900 mm, Only 200 operating hours! TECHNICAL DETAILS Undercarriage track: 400 mm with 3 grousers Rear belt: 6.9 m Shredding system: Size L (8 teeth) MACHINE DETAILS Additional hydraulic connection: 70 l/min Engine: Cat C7.1, 205 kW Fuel tank: 300 L Permissible total weight: 16,300 kg EQUIPMENT Ksdpjzcd Aajfx Aftjlw 24 V electrical control system Large radio remote control, complete Easy-to-maintain engine compartment with LED light Folding hopper with distance sensor and automatic control Hydraulically reversible fan wheel Audible start-up warning Tracked undercarriage with 2 travel speeds Frame for overband magnet Rubber quick-change pads Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Watering system LED work lights Additional electric pump for operation when the engine is stopped

Condition: good (used), Year of construction: 2022, operating hours: 710 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds Kjdpfx Aevrz Rvoftolw - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Irrigation

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Klsdpfsxx Tigjx Aftew Available from 06/2026

Condition: used, Year of construction: 2023, operating hours: 5,189 h, Equipment: Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard - Auxiliary hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gear, 380 kW – VARIO – - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor belt: belt length 4,450 mm, belt width 1,000 mm - Centrally positioned lubrication strips - 24 V electrical control system - Additional electric pump for the operation of the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb flap, open/close comb, optionally raise/lower permanent magnet belt, optionally raise/lower folding hopper” - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Loading protection on both sides - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint: RAL2011 deep orange Additional equipment: Kledpfx Aoyu Snusftew - 500 mm flat chain undercarriage unit - Watering system with hopper extension H=300 mm on both sides - Size "L" shredding system – VARIOMAT (Variomat system L600/4 – 42 teeth) - Rear conveyor length 7 m, width 1200 mm - Size "L" "Limiter" (20 pieces) - LED light package for engine compartment and rear - Central lubrication system with pump Delivery date to be arranged.

Condition: good (used), Year of construction: 2022, operating hours: 2,806 h, functionality: fully functional, Equipment: Kjdpfx Afewnfwqotjlw Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: used, Year of construction: 2022, operating hours: 3,250 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Kljdpfx Afoxx N T Iotew Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2022, operating hours: 4,561 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Kodpfjyhckmox Aftjlw Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit Klsdpfsxx N Dgjx Aftsw - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We invite you to visit our technical center to experience the quality and functionality for yourself. Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idle - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally with control cabinet extension for discharge conveyor belt and overband magnetic separator Complete solution with discharge conveyor belt in any configuration. Our core competence lies in delivering exactly what the customer truly needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find the right solution for your application. Kledov Tdq Iopfx Aftjw Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems All prices are net prices plus 19% VAT All information provided without guarantee, while stocks last!

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 1,750 mm, total width: 1,980 mm, total length: 2,460 mm, rotor diameter: 360 mm, rotor width: 1,000 mm, power: 45 kW (61.18 HP), Material shredding machine MHR 1030-45KW - Feed opening: approx. 1,030 x 1,235 mm - Hopper shape: inclined Klsdot Rivtopfx Aftjw - Hopper volume: approx. 1.5 m² - Rotor diameter: 360 mm - Rotor design: standard - Cutting system: 25 concave blades + 25 square blades - Screen aperture: 25/30 mm - Control: electronic via PLC - Control cabinet: fully wired, including 5 m connection cable - Main motor: 45 kW, 400 V - 50 Hz - 3-phase - Equipped with a sliding gate with a pressure bar - Painting: body RAL 9005 (black), hopper + drive guard RAL 5012 (blue) Equipment: Including automatic star-delta starter, automatic shutdown in case of idling, timed control to avoid unnecessary idle times Performance-enhancing step control for hydraulic sliding gate, vibration-damping machine feet including a base frame for integrating a discharge conveyor belt including wiring for integrating a discharge conveyor belt and an overbelt magnetic separator.

Condition: new, Year of construction: 2026, functionality: fully functional, operation weight: 700 kg, construction height: 1,970 mm, construction width: 900 mm, noise level: 80 dB, number of blades: 3, rotor diameter: 250 mm, rotor width: 450 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start-up and end-piece sections Klsdpfx Afjt Aagaotew In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling, and energy efficiency. These compact granulators are equipped with full sound insulation, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, or 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside of the machine to reduce downtime during maintenance. The strongly tangential, curved rear wall of the cutting chamber combined with the aggressive, open rotor design guarantees reliable material intake and minimizes the risk of blockages. The compact granulators are designed for use in blow molding operations. They are suitable for recycling large-volume parts such as bottles, canisters, and crates. Thanks to the low feed height, the machines can easily be fed by hand or via a small conveyor belt. Low noise emissions and minimal footprint make this granulator the perfect solution for inline size reduction. 98T8Mrx Optional rear wall with elevated stator knife M version: The feed method featuring an elevated stator knife is more suitable for thicker-walled and more compact parts, such as injection-molded components, profiles, and sheets. The cutting geometry and reduced rotor aggressiveness deliver high-quality regrind, regardless of the material type or form, such as injection-molded parts, profiles, or plates. Control system and switch cabinet: The integrated control system and operator console not only comply with all current safety regulations, but can also be customized to address specific requirements. In addition, peripheral devices such as infeed conveyors, metal detectors, and discharge systems can be seamlessly integrated into the machine’s control system. For enhanced efficiency, an optional intelligent energy-saving function is available, which reduces power consumption during idle periods and can start or stop the system automatically based on the operating status of upstream machinery. Standard configuration with blower, power consumption 0.37 kW, and 400-type cyclone Rotor diameter (mm): 250 Rotor width (mm): 450 Drive (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Approx. weight (kg): 700 Feed opening (mm): 380 x 450 Feed opening option, M Version (mm): 295 x 450

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. This machine is ideal for shredding bulky, lightweight aluminum chips or turning chips. Not suitable for heavier aluminum parts. Included: + Optimized cutting geometry + Adapted slide control Klodpfxogmh H Te Aftow + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 40x40mm, multi-rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting mechanism opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen size selectable (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,990 net - Inclined conveyor belt (discharge height approx. 220 cm) + €9,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos.

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Klodogbkkrspfx Aftow Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread. Throughput is highly dependent on the screen and the input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 volts, (9.2 kW or 15 kW also possible upon request) Optional: *Additional cost for the next larger machine with 18.5 kW and a larger silo diameter: + €2,750 net Robust steel construction, hardened cutting blades, screen with interchangeable inserts, optionally with (10), 15, 22, 26, 30, 40, or 60 mm perforations Klodpfx Ajzbizeftew For electric drive with star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge spout 150 mm, optionally for plastic or grain pipes, blowing distance approx. 12 m, chassis with 2 running wheels, Ø 380 mm, and one pivoting support wheel, Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) Weight approx. 240 kg, Spare part prices and options: 24 blades, hardened, €9.90 net each 6 bolts, €14.90 net each 1 screen, €475 net Cover, €290 net each Polystyrene disc: €600 net each

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials. Throughput is highly dependent on the screen and the input material: - up to 60 kg/h for EPS with a 15 mm screen *the coarser the screen, the higher the throughput. Motor 9.2 / 11 kW - 400 Volts, sturdy steel construction, hardened cutting blades, screen with interchangeable inserts, optional hole sizes: (8), (10), 15, 22, 26, 30, 40, or 60 mm with electric drive, star-delta starter, overload protection, and 8 m power cable, ready for connection, Klodpsh S H T Uofx Aftsw discharge nozzle 150 mm, optional for plastic or corrugated pipes, blowing distance approx. 12 m, chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) weight approx. 240 kg, Spare parts prices and options: 24 hardened blades, €9.90 each (net) 6 bolts, €14.90 each (net) 1 screen, €475 (net) 1 cover, €290 (net)