Used Extruded for sale (388)

Condition: new, Year of construction: 2026, functionality: fully functional, AM-20 Laboratory/Pilot Extruder with Wide-Slot/Film Die and Calender Unit Compact, vertical laboratory and pilot extruder AM-20 suitable for processing various plastics such as PP, PE, PS, ABS, PVC and other plastic granulates. The machine is equipped with a wide-slot die/film die, making it ideal for film extrusion, material testing, color and mixing trials, as well as development applications in laboratory and pilot plant environments. Additionally, calendering equipment is included, as shown in the photos. Technical data: • Model: AM-20 • Voltage: 110 V / 220 V • Input voltage: 2 x 220 V • Power: 1000 W • Screw diameter: 20 mm • L/D ratio: 15:1 • Throughput: approx. 500–1000 g/h • Dimensions: 45 x 25 x 60 cm Suitable for: • Film extrusion • Laboratory and pilot-scale trials Kodoyyw T Uepfx Ah Ejdt • Material development • Color and mixing tests

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off Kodpfx Ahorg Ebco Esdt - Control system

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter Ksdou Hik Djpfx Ah Eodt - 4x heating zones - dosing - Control system

Year of construction: 1989, condition: good (used), Werner ZSK 58/32 D twin-screw extruder Year: 1989 110 kW motor Kdjdpszktrrjfx Ah Eot

Condition: used, Cincinnati Proton 60LD30 single-screw extruders, in good working condition, ready for operation. Kdedpfxozpd Uus Ah Est

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, working height: 800 mm, input voltage: 400 V, overall weight: 800 kg, type of input current: three-phase, Manual Lisec butyl application machine LBH-25V, year 1989, fully functional, capacity of butyl storage cylinder 2 x 7,5 kg cartridge butyl application of spacer width 6-24 mm Kdjdpfxszn Np Is Ah Eet availabe from our stock in Hofkirchen/Austria

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Kdodpjxnpx Njfx Ah Ejt

Year of construction: 2001, condition: good (used), For sale: an industrial twin-screw extruder, Werner & Pfleiderer ZSK 133, now known under the Coperion brand. This machine is designed for processing and compounding plastic materials, especially PP granules, polyolefins, masterbatches, filled, and modified materials. The extruder was manufactured in 2001 and purchased used in 2015 in working condition. However, it has not been used in our production since the purchase. It has been idle since then and is being sold due to lack of use. Kdsdpfezc I Igjx Ah Ejt Key specifications: capacity up to 4 t/h, main electric motor 1100 kW, voltage 690 V, frequency 50 Hz, motor speed 1492 rpm, screw speed up to 400 rpm, maximum pressure 200 bar, heating power 137 kW, 6 heating zones, dimensions 3535 × 900 × 500 mm. The extruder includes a melt pump, an underwater granulator with a die and a set of knives, a cooling system for a water bath, an oil unit with electric heaters for heating the granulation die, and hydraulic units for operating and locking the shears. Suitable for factories involved in compounding, PP granule production, masterbatch production, regranulation, and processing of large volumes of plastic.

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Ksdpfxohx Elfs Ah Esdt Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Year of construction: 2022, condition: good (used), Manufacturer: Clextral Model: Evolum EV032 M Year: 2022 Condition: Used Serial Number: B145 Stock Number: 3385 Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Compressed air: 6 Bar Steam injection: 2 - 6 Bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 working hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max 10 Bar Reservoir: 7.5 litre Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Clextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max 10 Bar Reservoir: 10 litre Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam kit Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 Bar Maximum pressure:10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Compressed air: 6 - 10 Bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pc. Tooltemp thermoregulator Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group plowshear mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 litres Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Kodpfx Ahszab Sts Esdt Immequip feeding screw Type: ELV 70/80-R Hopper: 150 litres Outfeed: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing unit Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling power: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Year of construction: 2026, condition: new, functionality: fully functional, Conical laboratory single-screw extruder EX 60/30 The extruder is designed for processing light, free-flowing granular materials. Due to its screw size, the extruder is suitable for laboratory and testing applications. Kdedpfxozhamwj Ah Ejt The nitrided screw with a conical inlet section is fed with materials via a hopper, which then flow through the large inlet opening into the cylinder. Subsequently, the raw materials are compressed in the cylindrical screw section and discharged through a die. A direct drive with an upstream thrust bearing forms the drive train. Ceramic heating bands also allow for high processing temperatures. A shielding cooling system is installed between the material hopper and the first heating zone. Optionally, we also offer the following machines: The strands are passed through a water bath with a stainless steel tank to the strand granulator. A screen changer can also be offered as an option between the extruder and the die. Screw speed 150 Current 29.5A CEE-63A

Year of construction: 2008, condition: good (used), This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine is from 2008 and in excellent condition. Brand: Kuhne GmbH Model: K 60E - 33D Screw type: single screw Year of construction: 2008 Screw diameter Ø: 600 mm L/D ratio: 33 Cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm Kdodpfxjyxn T No Ah Ejt

Condition: good (used), Krispy Kreme machine in lovely condition. Try and find another, probably the only one for sale in Europe and in much nicer condition than the ones for sale in the US. Kdedpjvtg U Ajfx Ah Ejt

Year of construction: 1995, condition: good (used), functionality: fully functional, Bausano complete granulating line, including generator. Kodpfx Aozcarqsh Eedt Output: 350-400 kg/h.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, power: 52 kW (70.70 HP), screw conveyor diameter: 49 mm, machine/vehicle number: DE27566, TECHNICAL DETAILS Capacity: 150 – 250 kg/h Screw diameter: 2 x Ø 49.7 mm Ksdjzd Scpspfx Ah Eodt L/D ratio: 32D MACHINE DETAILS Motor power: 52 kW (DC) Control system: analog, contactor-controlled system EQUIPMENT Synchronous motor Degassing Vacuum pump

Condition: like new (used), Extruder hose sections for Weber DS 10.22. Kjdpshlvm Nsfx Ah Ejdt

Year of construction: 2000, condition: ready for operation (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Typ: 60 X 33 Screw diameter:60 Drive: 75 KW Output capacity PE: approx. 200 - 250 kg/h Kjdpfeifgwhsx Ah Esdt Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Year of construction: 1999, condition: ready for operation (used), AMUT EA90/24 SINGLE SCREW EXTRUDER Kdodpfx Ahjk Nn Dzo Ejt Type: RALDI Screw for PVC oil cooled Application: PVC, PE or PP Working hours 48.000 DC Drive 36,3 KW Year of construction: 1999 11 digital heating controllers Melt pressure and melt temperature display SIEMENS SIMATIC DISPLAY Operating hours: 48,119 h Trigger control via the extruder possible Condition: Good operational The extruder is my property Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 Germany

Year of construction: 2011, condition: excellent (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 90X33 Typ: SJ90X33 A6 Application: PE PIPES or PP PIPES Screw diameter: 90 Drive: 160 KW Output capacity PE: approx. 400 - 450 kg/h Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 Kdedpsifgwlsfx Ah Est D-26345 Bockhorn/Grabstede Germany

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. Ksdpfxotqu Dis Ah Esdt 5) The automatic filling system activates for the new product.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, 1.1 General Features Extruder Type - Horizontal Screw Diameter (D) - 30 mm Screw Length (L/D) - 25 net (L: Effective length as specified according to Euromap-20 standards) Raw Material - PVC-W (soft) / PE / PP / TPE / TPV (in granule form) Application - Gasket profile Capacity - 12-18 kg/h (Capacity may vary depending on the characteristics of the raw material) Extruder Zone - 5 = 3 + 2 (3 on the barrel, 2 for die-head control) Extruder Main Motor and Driver - 4 kW (Yılmaz Gearbox) / 4 kW Siemens/ABB AC Driver Extruder Control - Extruder Height - 900-1200 (adjustable) mm (Can be changed according to customer’s request) Die-Head Connection - Flange connection Kodpezarn Ejfx Ah Eedt Extruder Colour - RAL 7043–RAL 7047–RAL 3020 (Extruder colour can be changed according to client’s request) Die-Head Unit - Not included Pressure and Temperature Sensor - Not included Electrical Panel - 380-400V / 50-60 Hz Languages - English 1.2 Technical Details Barrel - Barrel Dimension: Ø30/25D - Barrel Zone Number: 3 - Cooling System: Air - Heating System: Ceramic resistance - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The barrel is made of 1.8550 (DIN 12891) nitriding steel and long-term gas nitrided to 66-70 HRc with a hardness depth of 0.5 - 0.7 mm. - A flange connection will be used between the extruder and the die head. Screw - Screw Dimension: Ø30/25D - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The screw material is made of DIN 1.2891 (1.8550, 34 CrAlNi 7) nitriding steel and long-term gas nitrided to 66-70 HRc hardness at a depth of 0.6-0.7 mm. - The screw will be manufactured in an EBM Barrier design for good homogeneity. Heating System - Heating is provided by ceramic insulated band heaters, certified according to CE and ISO 9001:2008. - There are 3 heating zones on the barrel. Cooling System - Cooling is provided by centrifugal blowers from TUV-certified EBMpapst, Germany. - There are 3 air cooling zones on the barrel. Reducer Gearbox - A TUV-certified YILMAZ brand, 4 kW DRE series horizontal helical reduction gearbox will be used. - The motor has an additional cooler for protection against higher loads. - The motor speed will be controlled via an ABB ACS-880 brand 15 kW inverter drive. Electric Control Cabinet - The electric control cabinet is equipped with ISO 9001:2008-certified equipment. - There will be one main electrical panel. The control panel will be located on the extruder. - The extruder is controlled by the main electrical panel. - This includes speed control of the drive and zone temperatures, which will be controlled by this PLC system. - A 7” touch screen will be used on the extruder (master unit). Thanks to this panel, two extruders can be fully controlled. - The extruder’s screw speed can be adjusted steplessly by means of a 4 kW Siemens / ABB AC frequency motor driver. The following information can be accessed via the touch screen: ● Extruder screw speed, ● Zone temperature set points, ● Actual values, ● Extruder motor current, - more details available

Year of construction: 2003, operating hours: 65,470 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: Titan 68R-APC/ 2 68F-60-40-1100-UT, Titan 68R-APC/2 68F-60-40-1100-UT with tungsten carbide cylinder and screw (designed for WPC-HDPE base) Ksdpfjzh Ednsx Ah Eodt Very good feeding behavior and good processing. Screw modification for optimal use, including in the recycling sector. The system has been completely overhauled and is ready for use. Feeder optionally available. SIHI vacuum pump. For throughputs up to 400 kg/h. For highly filled compounds, approximately 180 kg/h. 4-zone heating.

Year of construction: 2017, condition: ready for operation (used), Granulation line, regranulation extruder, Yei machine I. PE/PP waste regranulation line, model: YDN-120 Material: PP/PE Maximum capacity: PP: 550 kg/h PE: 650 kg/h Installed power: 420 kW Power consumption during operation: approx. 250 kW Water consumption: approx. 25 l/min Required water pressure: 3 kg/cm² 1) Extruder Designed for double degassing Double-stage gearbox Screw diameter: 120 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 32:1 Rotation speed range: 0-130 rpm Heater power consumption on the barrel: 51 kW Number of heating zones on the barrel: 5 Barrel cooling: 1/8 HP x 5 fans Motor: 175 HP, controlled by a frequency inverter 2) Screen changer, 15 HP Filter area: 90,639 mm² x 2 Equipped with a pressure sensor with alarm. In case of excessive pressure, the machine will automatically shut down. One temperature control zone. 3) Knife system for granulating at the extruder head Number of knives: 4 pcs Temperature control: 1 zone Heating power: 3.5 kW 2 heads for PE 4) Water cooling system Motor: 5 HP, controlled by a frequency inverter 5) Shredding and pre-compacting drum Vertical type with temperature sensor Motor power: 150 HP, controlled by a frequency inverter Equipped with 12 rotary knives and 17 stationary knives Mill diameter: 1300 mm Blower: 7 1/2 HP Continuous water cooling device 6) Belt conveyor Dimensions: 4950 mm (length) x 670 mm (width) Motor: 2 HP 7) Vibrating dryer Water pump: 5 HP x 1 Vibration motor: 1/4 HP x 4 pcs Water tank dimensions: 3615 mm x 700 mm x 471 mm 8) Regranulate silo (with a centrifugal blower of 7.5 HP with a transport pipe) 9) Control panel Indicates the operating status of all major electrical devices The machine is equipped with a double cylinder screen changer, allowing for screen changes without stopping the machine. The line is designed in a compact way, which saves usable space. The device requires maintaining the cooling water temperature: 25-35°C Equipment: Enlarged drum to 1300 mm with 150 HP motor Second degassing port on the first screw with a vacuum pump Metal detector 5 HP centrifuge Second "cascade" plasticizing module (150 mm screw) with filter with a single degassing port and vacuum pump double-stage gearbox Parameters of the second plasticizing module Screw diameter: 150 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 20:1 Rotation speed range: 0-130 rpm Number of heating zones on the barrel: 2 Motor: AC 75 HP, controlled by a frequency inverter Control panel Hydraulic screen changer x 2 cylinders Additional equipment Increased filter area on the first screen changer: Standard: diameter 140 mm x W126 mm = 55,389 mm² x 2 After enlargement: diameter 204 mm x W141.5 mm = 90,639 mm² x 2 The delivery includes additional cooling for the control cabinets Kdodpfozhm Ihsx Ah Ejt Static mixer with a connecting pipe for homogenization and uniformization of the mass.

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm Kdsdpfx Ahew Tbr Hj Est A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Kodpfx Ahevbcbus Eedt Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.