Used Compounding Extruder for sale (591)

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Ibedsz A R R Hopfx Ap Hsb Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 27 mm, Warehouse – No. 2875 1 used compounding and granulation line, partially overhauled in 2026 and functionally tested, consisting of: Brabender gravimetric 2-component dosing system (expandable, optional at extra cost) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 stand-alone control Twin-screw extruder Leistritz type ZSE 27 HP Co-rotating, self-cleaning, segmented screws and cylinder with intensive cooling. Screws 2x Ø 27 mm - 36 L/D with 8 cylinder zones with 3 degassing zones, 1 vacuum pump 1.5 kW Screw speed up to 1,200 rpm - adjustable Extruder drive 33.8 kW - heating power 9.8 kW installed Melt pressure sensor Control system Macromatex III MAAG Gala underwater granulation system type LPU, model SLC 5, including: Polymer start-up valve with hydraulics Die plate 20°, granulator SLC 5 with 1.5 kW drive Water box – temperature-controlled water system with Granulate centrifugal dryer type 1150, 1.5 kW drive Ibsdjz A Sxlopfx Ap Hsb Xantec control system Siemens Accessories: Single tempering unit for the extruder processing section The system is ready for demonstration; a test run / sample production with your material is possible on short notice. Details and dates upon request. We have other compounding extruders available ex-works: Alphatec, Coperion, Leistritz, Berstorff-Krauss Maffei, as well as all accessories: granulation systems (BKG - MAAG gala, Sikoplast, IPS, Scheer, ...), melt filters (BKG, Ettlinger, Alphatec, ...). Commissioning / training for all our systems can be carried out by our technicians; details upon request.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MPC45.2, Stock No.: 2789 1 used, partially overhauled, and functionally tested compounding line Berstorff / Compex Type MPC 45, throughput up to approx. 150 kg/h, material-dependent. The system consists of: Co-rotating twin-screw extruder with barrier screw, segmented screw and cylinder Temperature control unit for cylinder / processing section (connection and water chiller on the customer side) Ibjdoz A S S Sjpfx Ap Hob Compex/Berstorff Type MPC 45, drive 34 kW Screws 2 x Ø 45 mm – 40 L/D with screw speed up to 450 rpm 2x Side feeder extruder ZSB 34 (twin-screw) (e.g. for glass fiber feeding - formulations) 3x Degassing zone including vacuum pump Melt filter / screen changer, hydraulic (for processing ground material) Strand granulation, complete with: strand head / nozzle Strand cooling trough and strand granulator, e.g. A-SG 60 (NEW CONDITION), IPS 60E, Alphatec, Scheer, ... Control system: Siemens HMI screen, new in 2022 OPTIONAL: Gravimetric differential dosing system with control Price on request, depending on the design and number of dosing stations. Alternatively equipped with underwater granulation, stock no. 2758 MAAG Rieter Sphero 50, with separate control Start-up / training at your plant by our technician is possible, details on request. Test run / sampling / function test with your material mix can be carried out in the short term, details and date on request. Please send us your material data sheets in advance. Further compounding extruders / lines are available for demonstration at our Wuppertal plant.

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired Iodpfei Dtbqsx Ap Hsbb OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port Ibodpfx Apjycuuyj Hjb • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, for sale second hand brick - machinery Handle -extruder 600/560 Händle and Mixer MDV920b -filermixer Händle -roller mill 800x800 Händle WFZ880a Ibsdpfx Apszmxi Uo Heb - conveyer 40m x 80 cm gummi

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Number: DE27699 Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Ijdpfexykcgsx Ap Hebb Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing The extruder is in very good condition and has only 29,000 operating hours. Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Capacity +/- 800 kg/h depending material specifications Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port Iodpfxeh Eyduo Ap Hobb new control board optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing material feeding , loss-in-weight blenders pellet classifier screw configuration and more Please inform about your needs to send you a detailled quotation, thank you All ex our stock Wuppertal-Germany available

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Ibedex Dip Tepfx Ap Hob Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Ibodpfezti Tkjx Ap Hjb Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling Ibedpfx Aoi Dtbuep Hob 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LD Ibjdpsc Rukwsfx Ap Hjb Capacity 800 kg/h depening material specifications Drive from 197 kW up to 350 kW possible , optional by appoinment L/D 34 - 40 LD , by appointment > due to your material formula needs drive up to 230 kW - 350 kw optional against add.price 1x venting port new control board optional - equipment against additional price: screen-pack-changer pelletizing material feeding , loss-in-weight gravimetrci blenders pellet-classifier and more Please inform which equipment you need for a detailled quotation, thank you. All ex stock available

Condition: reconditioned (used), machine/vehicle number: 2586k, No.: 2586k 1 used, functionally tested and operating compounding-pelletizing line, equipped with : Extruder twin-screw COMAC Type EBC 68 with Motor 110 kW-DC screws 2x Ø 68 mm – 40 L/D co-rotating intermeshing Segmented screws & cylinders, Water / Medium cooled 1x venting port 1x side feeder screws 2x Ø 52 mm Melt-filter 2 piston Type K-SWE 160 incl. Hydraulic-pack BKG underwater-pelletizing unit Type AH 2000, complete with: diverter-valve / Hydraulic pelletizer with motor 4 kW incl. die-plate and knife-holder Water – Box TWS volume 900 liter, heating power 40 kW Installed Water pump with 11 kW, By-Pass-System Pellet Spin-dryer TVE 2000 ED with motor 4 kW water sieve with circulation pump 4 kW Siemens S7 – Touch control board More extruders / recycling - and compounding lines ex our stock Wuppertal-Germany available, as: pelletizing systems, dosing & blending, screen-pack-changer, pellet classification, granulating and many more. Ask for our most recent stock-list or visit us in Wuppertal-Germany. You´re welcome. Iodpjd H S U Uofx Ap Hjbb

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION Ibedpfx Apowivdkj Heb

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Iedpjx Apckofx Ap Hsbb

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Iodpfxsz A Sz Hs Ap Hebb Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Iedpjzylxijfx Ap Hobb Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: like new (used), functionality: fully functional, machine/vehicle number: EX-006-S25, Year of construction: 2022, operating hours: 20 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, compressed air connection: 10 bar, input frequency: 60 Hz, power: 9 kW (12.24 HP), We offer this as new CEAD S25 LSAM Extruder, year of construction 2022. Ibodoy Nk S Nopfx Ap Heb Model: S25 Extruder Serial number: EX-006-S25 Input phases: 3 phases Input voltage: 400 V Input frequency: 50-60 Hz Input current: 32 A Power: 9 kW Short-circuit current rating: 10 kA Air pressure: 6-10 bar Air pressure: 87-145 psi Recommended RCD: 30 mW Pellet drier and feeder are included. Almost 2 tons of Airtech Dahltram® C-250CF pellets are included + purging compound. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2020, condition: good (used), functionality: fully functional, For sale: Farmet FE1000 Clever Max industrial feed / soybean / grain extruder. Manufacturer: Farmet Model: FE1000 Clever Max Year: 2020 Main motor: 110 kW Throughput: approx. 900–2,100 kg/h depending on material and process setup Condition: used, fully functional Location: Slovakia, EU The extruder was used for approx. 2 years. Additional accessories were never used according to seller information. Included: Farmet FE1000 extruder Clever Max control system PLC control with HMI touchscreen Frequency converter for the main drive Stainless steel steam conditioner Cutting head Electrical control cabinet Accessories as shown in the photos Suitable for: soybean extrusion full-fat soybean processing cereal and grain extrusion oilseed meal / press cake processing compound feed production pet food and fish feed applications, depending on recipe and final line configuration The Clever Max control system allows better adjustment of extrusion parameters through PLC/HMI control and frequency regulation of the main drive. This is a strong industrial extruder suitable for medium-capacity feed and oilseed processing plants. Isdpfx Aexfcwmep Hjbb Sold as shown in the photos. Inspection possible. Loading possible. Worldwide shipping on request. Price: FCA Slovakia, plus VAT. Zu verkaufen: Farmet FE1000 Clever Max Industrie-Extruder für Futtermittel, Soja, Getreide und Ölsaaten. Hersteller: Farmet Modell: FE1000 Clever Max Baujahr: 2020 Hauptmotor: 110 kW Leistung: ca. 900–2.100 kg/h, abhängig von Material und Prozess Zustand: gebraucht, voll funktionsfähig Standort: Slowakei, EU Der Extruder war ca. 2 Jahre in Betrieb. Weiteres Zubehör wurde laut Verkäuferangabe nicht benutzt. Ausstattung: Farmet FE1000 Extruder Clever Max Steuerung PLC-Steuerung mit HMI Touchscreen Frequenzumrichter für den Hauptantrieb Edelstahl-Dampfkonditionierer Schneidkopf Schaltschrank Zubehör wie auf den Fotos Geeignet für Sojaextrusion, Vollfettsoja, Getreide, Ölsaaten, Presskuchen, Mischfutter sowie Pet-Food- und Fischfutter-Anwendungen je nach Rezeptur und Linienkonfiguration. Besichtigung möglich. Verladung möglich. Versand auf Anfrage. Preis: FCA Slowakei, zzgl. MwSt.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Ibsdpfjznkx Djx Ap Hob Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2002, condition: good (used), functionality: fully functional, An ultra reliable 130 / 160mm OMP Prealpina plastics extruder, supplied by ourselves back in 2002. I have know the extruder history since new as i was the supplying agent originally. Originally supplied to reprocess confectionery Polypropylene films with 100% heavy print on the film , it performed very well in degassing and compounding the plastics materials till that contract expired. The extruder is a cascade version , allowing significant extra gas venting and polymer mixing, by utilizing a second short barrel 160mm extruder to deliver molten and clean plastic to a die face cutter, followed by a centrifuge to dry the pellet. The line has recently been fitted with an ultra efficient FIMIC fully automatic screen filter, providing probably the most efficient filtration available to plastics recyclers. being a cascade configuration , with superior filtration and venting , the line is most suitable for difficult plastics films or fibre recycling. The line has a 7 cu metre silo feeding directly into a force feed conical delivery system to the feed zone of the 130mm extruder. There is a master batch/ additive feeder included. The line was sold to a company in Lituania from its earlier owner in the UK in 2022 , but the plastic feedstock thought to be available in Lithuania never materialised. The line has been stored since, and is still dismantled and able to be shipped immediately to a new buyer. Isdpfozwhtdex Ap Hjbb

Year of construction: 2001, condition: good (used), For sale: an industrial twin-screw extruder, Werner & Pfleiderer ZSK 133, now known under the Coperion brand. This machine is designed for processing and compounding plastic materials, especially PP granules, polyolefins, masterbatches, filled, and modified materials. The extruder was manufactured in 2001 and purchased used in 2015 in working condition. However, it has not been used in our production since the purchase. It has been idle since then and is being sold due to lack of use. Key specifications: capacity up to 4 t/h, main electric motor 1100 kW, voltage 690 V, frequency 50 Hz, motor speed 1492 rpm, screw speed up to 400 rpm, maximum pressure 200 bar, heating power 137 kW, 6 heating zones, dimensions 3535 × 900 × 500 mm. Ibjdpfx Ajzc I Igjp Heb The extruder includes a melt pump, an underwater granulator with a die and a set of knives, a cooling system for a water bath, an oil unit with electric heaters for heating the granulation die, and hydraulic units for operating and locking the shears. Suitable for factories involved in compounding, PP granule production, masterbatch production, regranulation, and processing of large volumes of plastic.

Condition: like new (used), Year of construction: 2024, operating hours: 490 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, COMPLETE MINERAL MASTERBATCH PRODUCTION LINE – PELLETIZING PROCESS High-concentration mineral masterbatch • Turnkey industrial installation • Spain ASKING PRICE: XX.XXX + VAT | COMPLETE LINE ONLY A complete production solution Complete industrial installation designed for the production of highly concentrated mineral masterbatch. The line integrates raw material handling, weighing/dosing, high-speed mixing, conveying, pelletizing, screening, and bagging into a single, coordinated system. The equipment is offered as one complete lot, dismantled and available for relocation. Capacity Approx. 750–850 kg/h* Operating hours Maximum 490 h Mixer 500 L / 300 L usable / 75 kW Pelletizer 350 mm / 37 kW Automation Siemens S7-1200 PLC Power supply Includes 200 kVA Perkins generator Integrated process Ijdpfsz Aibaex Ap Hsbb RAW MATERIAL FEEDING → AUTOMATIC WEIGHING/DOSING → HIGH-SPEED MIXING → TRANSFER → PELLETIZING → SCREENING → BAGGING Why this line is attractive • Complete and integrated: avoids the engineering and integration work involved in sourcing the equipment individually. • Very low operating hours: maximum recorded operating time is 490 h. • Industrial-scale mixing: 500 L mixer with 75 kW drive and variable-speed control. • Automated dosing and control: Siemens S7-1200 PLC architecture with weighing and recipe-management functions. • Relocatable asset: installation is offered dismantled, making it suitable for transfer to another industrial site. *Capacity is an approximate figure based on the installation configuration and intended application; actual throughput depends on formulation, operating conditions, and product specification.

Condition: used, functionality: fully functional, Used Lehmann UMT extruder. Suitable for a wide range of applications including food, biogas, substrates, wood fibre, and more. Contact for further information. Iedpfx Apjyxfg To Hsbb

Year of construction: 2024, operating hours: 10 h, condition: like new (used), functionality: fully functional, Extrusion Line with Densifier – Ideal for Recycling Applications This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials. Iedpfotziudjx Ap Hobb