Used Extruder Sheeter for sale (510)

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h The price refers to one line (exstruder+press) Godpfx Afetxinaoiouh

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Gsdpfx Aewivdksfieuh Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Condition: used, Polystruder Extruder with Berringer water ring Pelletizer, 250 HP, 3 phase motor, with screen changer, includes spin dryer, and hopper. Gusdpfsxd D I Djx Afijh

Condition: good (used), Year of construction: 2025, Maynards is offering the machinery and equipment from GoodYear’s 17–22 inch passenger car and SUV tire production facility in Fulda. On-site production will continue until the end of September 2025. We invite you to express your interest and submit offers for the complete facility or larger equipment packages. Immediate purchase is possible. Products (until closure): - High-performance and ultra-high-performance tires - Run-on-flat tires - SUV/4x4 tires - Diameter range: 17–22 inches Plant and Systems: - Mixing lines (Banbury 1–3) - Extrusion lines (Triplex, Quadruplex) - Apexing and filling/weighing systems Gjdpfx Afjxa Dqdoijuh - Steel cord production (winders, extruders, carousel, spoolers) - Tire building machines (R2.5, SOC-88, R1, ISR1, cutting machines) - Calendering lines (Comerio, framework, winding machines) - Tire curing and finishing lines - Tire curing presses (HF & Krupp, 77 units) - Grinding and cut-to-length machines (Matteuzzi, Collmann, Roentgen, TR5, TR7) - Cutting and calendering systems (Bias 66, KEF HTBC, rubber calender) - Tire carts - Tire testing equipment Utilities and Supply Systems: - Steam boiler systems - Water treatment - Oxygen supply & compressors Storage and Infrastructure: - Silos & oil tanks - Fire protection and safety systems (plant fire brigade) - Material handling and transport equipment (forklifts, tow tractors, pallet trucks) - Hydraulic pallet turners Workshop Area: - Maintenance of machinery and equipment Notes: - All machinery and equipment is offered “as is, where is.” - All Goodyear-specific data has been removed, and the software has been reset to factory settings.

Condition: excellent (used), Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for granulating soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Gusdpow Iu T Tsfx Afish

Year of construction: 2012, condition: ready for operation (used), This LEISTRITZ ZSE60MAXX-48D was manufactured in 2012. A co-rotating twin-screw extruder, it's designed for high-performance compounding of advanced polymer materials, including biodegradable polymers. Adaptable to various extrusion processes, it's ideal for bioplastics, masterbatch production, or specialty compounding. Contact us for more information about this machine. Godpoxnd Rasfx Afijuh Application Types Extrusion

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Farmet extruder FE250, 22kw motor, with command cabinet, made to extrude soybean, grain, rapeseed/sunflower after prepressing, or pet food (with additional cutting head, not included). Condition is very good, most of working parts replaced. Capacity 250-400kg/h Gusdpfswbkykex Afioh

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Gusdpfx Afsxnpx Njioh

Condition: used, Year of construction: 1996, The line has been frequently modernized since its commissioning. Line setup according to diagram: • Head • Cylinder • Gearbox • Motors • Steel frame Control system: Modernized process control system, several operator and monitoring stations (screens, control desks) can be seen. Maintenance / condition: Frequently modernized, visually well-maintained condition. Gedpfjxb Ud Rex Afisuh Accessories / options: Conveyor systems, cooling sections, monitoring and control units, integrated roller and handling equipment.

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Gjdpspaiaijfx Afiouh Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Year of construction: 2016, condition: like new (used), Teknostamp pastry sheeter Gedpfeg Ifw Eex Afijuh Serial: 580160101 2016 tabletop pastry sheeter, overall length 2100mm, belt width 590mm, adjustable thickness, 3Ph (missing back cover)

Condition: good (used), Zmatik Sf500L dough sheeter. Operational. The belt needs replacing. Godpfexm Rmrox Afiouh

Year of construction: 1994, condition: used, machine/vehicle number: 25453, Net weight: 300 kg, for color additives Guedexad Ivjpfx Afish

Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 1125 mm Measurements depth 2120 mm Measurements height 1960 mm Machine weight 1100 kg Gujdpfxexg Ukhj Afish Main Drive Spindle speed range 2486 Injection Unit Screw diameter 45 mm This Krauss Maffei KME 45 XS was manufactured in 2014. It features a screw diameter of 45 mm and a length of 1350 mm, operating between 20-200 rpm. The machine includes five heating/cooling zones and a hopper volume of 0.1 m³. Ideal for those looking to enhance their extrusion capabilities. Contact us for more information about this machine. Application Types Extrusion

Year of construction: 2023, condition: like new (used), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Guedpfx Asq R Tkwjfijh Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Year of construction: 2010, condition: used, Designed for COEX cast film production. Processing of thermoplastics within a temperature range of 150–300°C. The system can be operated with the following configurations: - Main unit (CoEx system) from Kuhne POSSIBLE LAYER STRUCTURES: - Monofilm - 3-layer film (A-B-A) MAIN EXTRUSION SYSTEM FROM KUHNE Total system output: max. 900 kg / h Main extruder: 105/33 L/D, max. 650 kg / h Co-extruder: 90/33 L/D, max. 250 kg / h Net film width: 800–1400 mm Thickness: 25–530 µm Production speed: 8–150 m/min Roller width: 1600 mm Max. roll weight: 2000 kg Version with air knife and vacuum box One gravimetric dosing unit with 3 stations per extruder Each extruder equipped with melt pump and 2-piston screen changer Guodpfx Afsxl Uh Deioh ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness gauge for automatic die with automatic transverse profile control; Beta Controll Corona pretreatment on both sides (also selectable for one side; max. 6,000 W) by AFS WINDING UNIT FROM “SML Co.” Automatic turret winder with automatic splicing Max. finished film width: 1600 mm Max. winding diameter: 1000 mm Turret winder for 6" winding shafts

Condition: excellent (used), Year of construction: 1997, operating hours: 110 h, The machine was located at a university and used exclusively for teaching purposes. It was in use for only 110 hours. Name: Twin-screw laboratory extruder Manufacturer: Leistritz Extrusionstechnik GmbH Type: MICRO 27 GL / 32D Year built: 1997 Speed: 400 rpm Operating voltage: Electrical connection values: 400V, 50Hz Control voltage: 230V Hours of operation: 110 hours Driving force: 8,4 kW, Input speed: 2200 rpm Dimensions: Extrusion height: 1050 mm Length: approx. 2500 mm Width: approx. 800 mm Height with control panel: approx. 1900 mm Total weight of the extruder: approx. 950 kg. Technical doc.: Yes Message: Screw diameter: 27 mm, Screw length: 32 D, Screw flight depth: 4.3 mm, Screw rotation direction: co-rotating / counter-rotating, Screw speed range: 10 - 400 rpm, Total screw torque: 200 Nm, Screw back pressure (continuous operation): max. 200 ba,r Gear ratio: i = 5.38 Accessories: Dosing machine, nozzle hop / LSA tool, vacuum unit, temperature control unit, cooling belt (stainless steel version), Strand pelletizer, granulator, profile downstream. Condition: Used very good Gedoxlpzfjpfx Afisuh Price: By request

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Guodexgfttopfx Afieh Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel masticator blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below.

Condition: ready for operation (used), working width: 500 mm, belt width: 470 mm, total dimensions: 1600 mm x 900 mm x 500 mm. Godew Rcqfjpfx Afijuh

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 320 kg Gusdpfoxg Uknox Afish This Krauss Maffei KME 30-25 was manufactured in 2016. It operates on a 3-phase 400 V system with a frequency of 50 Hz. The total input current is 31 A, with motor and heating currents at 15 A and 16 A respectively. It's a robust single screw extruder ideal for consistent performance. Contact us for more information about this machine. Application Types Extrusion

Condition: good (used), Year of construction: 1967, functionality: fully functional, Max. jumbo reel width: 1400 mm Min. jumbo reel width: 480 mm Max. jumbo reel diameter: 1600 mm Expanding chucks diameter: 150 mm and 300 mm Speed: 160 m/min Max. stacking height: 250 cm With integrated sheet counter Paper grammage: 100 to 600 g/m² Production format: Length x Width Min.: 450 x 480 mm Max.: 1940 x 1400 mm Upper cutting station by Dienes Werke Year of manufacture: 2007 Partial overhaul carried out in 2003 Electronics upgraded in 2004 Upper cutting unit by Dienes Werke installed in 2007 Unwinding stand overhauled in 2009 Machine can be demonstrated. Guodpfx Afjxlizfjijh

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Gedpjxlcfkefx Afieuh Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Year of construction: 2013, condition: ready for operation (used), Additional Equipment Extruder (Krauss Maffei) Godpfx Aexg Uidefisuh Calibration table (Ide) Haul-off (Ide) Separation unit (Ide) Optionally a sawing unit (Battenfeld) can be purchased the capacity is 180 kg / h This twin screw extruder was manufactured in 2013. It features a robust 4m long base frame, galvanized and powder-coated for durability. The machine includes three liquid ring vacuum pumps and a motorized longitudinal adjustment of 400mm. It's equipped with a caterpillar haul-off capable of speeds from 0.7 to 14.0 m/min. Ideal for producing roller shutter profiles, the Krauss Maffei KMD 75 XS/P machine we have for sale represents a significant opportunity. Contact us for further details. Application Types Extrusion

Year of construction: 2025, condition: ready for operation (used), General Data Gjdpfx Asxg Ukbjfijuh Machine weight 1100 kg This Krauss Maffei KME 45 XS single screw extruder was manufactured in 2025. It features a 23 kW drive power, a maximum drive speed of 2486 rpm, and a screw diameter of 45 mm. The machine includes five heating/cooling zones and a maximum installed cylinder heating capacity of 10 kW. Ideal for high-quality extrusion capabilities. Contact us for more information. Application Types Extrusion

Year of construction: 2008, operating hours: 75,559 h, condition: ready for operation (used), Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Guedow Spt Njpfx Afieh Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply This Krauss Maffei KME 75-36 R AC single screw extruder was manufactured in 2008. It features a KM-GM 750 control integration with meter weight and mass throughput control, and a capacity of up to 750 kg/h granulate. The machine includes a connection for INDEX wall thickness measurement and is equipped with a EURO socket CEE 32 A - 6 H / 250 V. Contact us for more information about this machine. Application Types Extrusion