Used Extractor for sale (777)

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Rodpont Uc Rjfx Aizou Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Condition: excellent (used), Dust extractor unit to run with preduster. Almost as new. Rsdpeumm Npsfx Aizju

Condition: excellent (used), GEA OptiAir dust extractor unit. 2015 machine in nice condition. We have GEA OptiFlour II 600 units in stock to run with this. Rjdpfxjv Ig Rmj Aizou

Year of construction: 1997, condition: excellent (used), Waste-box collector, waste collector, blower, fan, filter system, radial fan, dust extraction blower, fan, extraction, dust blower, extraction, dust blower, extraction system, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan -Dust extraction blower: with filter gases -Monitoring device: for the amount and quality of waste in the waste suction system -for sampling: on teasels or cleaners Redpjy Uxmxefx Aizsu -Motor power: 2.2 kW -Speed: rpm -Inlet connection: 1x Ø 300 mm, 2x Ø 100 mm -Dimensions: 1200/800/H1700 mm -Weight: 248 kg

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Rjdpsu R S A Refx Aizeu Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle Rodpfxeu T Hrpj Aizeu - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically Rjdpfx Asxpximsizou shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Redpjwzyh Refx Aizju Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: new, Year of construction: 2025, machine/vehicle number: 0023, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 1,200 m³/h, intake vacuum (max.): 26 mbar, noise level: 85 dB, actuation type: electric, total height: 2,300 mm, total length: 3,000 mm, total width: 1,000 mm, overall weight: 650 kg, Equipment: CE marking, documentation/manual, Hello, I have a brand new, unused extraction unit for sale, which was purchased together with a five-axis machining center. I am selling it because I have installed a central extraction system for the machine, and this unit is not needed at the moment. Redpfsyl Ncwjx Aizju

Condition: used, Year of construction: 1994, functionality: unexamined, Underfloor extraction with fan Edge extraction with fan Air supply unit 3102 WW, output 75 kW Rodpsyuf S Hjfx Aizju Air volume 10,500/5,250 m³/h Air supply system with supply unit and supply ceiling (replaces the extracted air) Solvent evaporation device Fire protection flap Control system

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Rjdoy T Iyrepfx Aizsu Dimensions: Height: 4.02 m Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Condition: used, Year of construction: 2023, New demonstration machine! List price: €4,463 net. Robust construction made of galvanized sheet steel. Work area with a special pleated cardboard filter, an additional after-filter, and a filter cassette for extraction in the lower area. All filters are easily and quickly replaceable. Internal radial fan, in explosion-proof design, is equipped with an impeller made of sheet steel. The explosion-proof drive motor (EEx nA II) is located outside the airflow and drives the fan directly. A power supply cable with a length of 10 m, as well as a plug-in circuit breaker combination with a built-in on/off switch, are included in the scope of delivery. Caution! The switch is not explosion-proof and is only intended for use outside potentially explosive areas. The fan pressure connection is located on the top. The air outlet is vertical. The paint mist extraction wall complies with the latest regulations. The paint mist extraction wall is designed for installation in Zone 2 painting areas, with the average calculated concentration of flammable solvents limited to < 25% of the lower explosion limit. Technical data: Airflow, max.: 3500 m3/h. Exhaust outlet: 300 mm. Working area: 2000 x 1000 mm. Space requirement: 2600 x 920 x 1420 mm (H). Motor: 1.50 kW, EEx nA II T3, IP 55, 1500 min-1, B5, 400 V, 50 Hz. ATEX marking: Ex II 3 G. Sound pressure level: 75 dB(A). Weight: 220 kg. Fan: left-hand. Pleated cardboard filter: 1000 x 2000 mm - 1 piece. Pleated cardboard filter 1000 mm (Art. No. 2072091295) - each as a 10 m pack, fire-retardant according to DIN 53438 F1/K1 - Cutting length = 25 pleats on 1000 mm. 2072090518 Filter cut for Paint-Star - 1 piece. 2072091473 Cassette filter for Paintstar - 1 piece. Rjdpfx Asy Ehlrjizsu Location: Rieth.

Condition: excellent (used), Dust and mist extractor IMAS Rsdsyw Hrbepfx Aizju

Condition: good (used), Oil and coolant mist extractor and collector for lathe or CNC machining center, LNS brand, model WS2 1000/700. Airflow: 950 m3/h, motor power: 0.75 KW, voltage: 200-230V / three-phase (3PH) / 50-60 Hz, weight: 35 Kg, year of manufacture: 2019. Rjdpfx Aey Tmb Ueizsu

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Rsdpfx Asyhxl Reizeu Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop

Condition: good (used), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Rsdpfx Aorb D Neizou Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h / 400 V

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Redpfx Aoyffx Ioizeu Machine width: 700 mm Machine height: 2200 mm Weight:

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 16.5 m², suction capacity: 2,400 m³/h, Equipment: type plate available, Dust extraction unit, Donaldson Torit brand, vacuum filter, dust collector for extracting metal, mineral, and hard fiber dust, and for effectively collecting process dust. Rsdpfey Sz Dnjx Aizou Donaldson Torit Vibra Shake is a self-cleaning dust extraction unit for intermittent applications where high collection efficiency is important, e.g., recovery of precious metals. Two-stage filter cartridge for high-performance filtration of both coarse and fine dust. The filter screen captures coarse and fibrous particles. The vacuum fan is located behind the filter on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit Model: VS 1500 (Vibra Shake) Fan power: 3 kW Capacity: 2400 m3/h Filtration area: 16.5 m2 Inlet diameter: 180 mm Stock number: 1140

Condition: used, Year of construction: 2009, operating hours: 5,799 h, functionality: fully functional, type of input current: three-phase, overall weight: 600 kg, input voltage: 400 V, filter area: 40 m², suction capacity: 4,000 m³/h, negative pressure: 2,500 Pa, transport height: 2,150 mm, transport length: 1,420 mm, transport width: 1,400 mm, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Rodpfx Aijy Szw Uozsu Kemper System 8000 The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean side, which minimizes the risk of explosion. Year of manufacture: 2009 Fans with a power of 3 kW. Capacity: 4000 m3/h Vacuum: 2500 Pa Filtration area: 40 m2 Stock number: 1144

Condition: new, Year of construction: 2025, Suction port diameter: 1 x 200, 3 x 100mm Nominal volume flow: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240l Filter cleaning: motorized Redpfx Aohpmawsizju motor power: 3 kW Noise level: 78dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, overall weight: 900 kg, filter area: 95.6 m², suction capacity: 3,000 m³/h, negative pressure: 2,000 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter by Donaldson Torit. Suitable for welding, grinding, sandblasting and all kinds of dry dust. Equipped with Ultra WEB cartridge filter elements. The filter is cleaned pneumatically with compressed air pulses during operation, resulting in high device efficiency. Fan power: 3 kW. Capacity: 3000 m3/h. Vacuum: 2000 Pa. Filter surface area: 95.6 m2. Inlet diameter – 200 mm/180 mm. Overall dimensions: 1.70 m x 1.30 m; Height: 2.30 m. Inventory number: 0006. Redpfjy Sf Nbex Aizju

Condition: new, Year of construction: 2026, functionality: fully functional, Complete Set of Cloth Bags for Dust Extractors Dimensions: Ø500 × 850 mm Designed for the following dust extractor models: CORMAK FM300 CORMAK FM300S Redsy T Hbhopfx Aizju The set includes two cloth bags: one upper bag with a mounting handle for installation on the top of the dust extractor, and one lower waste collection bag.

Condition: new, Year of construction: 2024, New dust extractor Year of manufacture: 2024 Technical specifications: Certified according to BGHM H3* / CE / GS Power consumption: 2.2 kW Current draw IE2: 4.4 A Filter area: 9.5 m² Dimensions: 1575 x 910 x 2110 mm Dust bin volume: 1 x 160 l Weight: 405 kg Suction nozzle: 160 mm, right Operating air volume: 2300 m³/h Volumetric flow max/nom.: 1780/1447 Rjdpfx Aisy R E Uuozsu Vacuum at nominal air flow: 2450 Pa Vacuum before fan at VNenn: 3160 Pa Maximum sound pressure level: 74 dB(A) Filter regeneration: pneumatic, max. 7.5 bar Operating mode: continuous operation Compressed air connection required Availability: short notice Location: Hochheim

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, suction capacity: 2,800 m³/h, intake manifold diameter: 315 mm, filter area: 21 m², noise level: 68 dB, total height: 2,400 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 250 kg, Oil mist extractor for CNC machines, Nederman NOM28 HEPA filter separator Rsdoy R Aldspfx Aizeu The NOM filter is designed for use with individual numerically controlled machines producing a limited amount of oil mist. NOM filters are intended for applications that require higher air flow rates. In metalworking workshops where oil mist removal is a challenge, these filters can be connected to a central duct system supplying all machines. All units are equipped with a manometer indicating when filter cleaning (self-cleaning) is required. Fan power: 2.2 kW Airflow: 2,800 m³/h Filtration area: Main filter – 21 m² HEPA filter – 40 m² The device is in excellent technical condition – like new. Stock number: 1134

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 31 m², Dust extraction unit, chip extractor, self-cleaning filter, vacuum, pneumatic ALKO MOBIL JET 300 The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. The fan is positioned on the clean air side, minimizing explosion risk. The unit is additionally equipped with a fire protection system. Perfectly suited for wide belt sanders and all types of dry dust in various technological processes – filtration bags can be replaced to suit specific requirements and applications. Fan power: 7.5 kW Capacity: 6000 m3/h Vacuum: 2400 Pa Rsdpfx Aioy Rz T Hozsu Nozzle diameter: 300 mm Air return Automation for direct start from machines. Stock no.: 1131