Used Extruder Screw for sale (5,755)

Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 1125 mm Measurements depth 2120 mm Measurements height 1960 mm Machine weight 1100 kg Main Drive Spindle speed range 2486 Crjdpfxsxg Ukhs Abush Injection Unit Screw diameter 45 mm This Krauss Maffei KME 45 XS was manufactured in 2014. It features a screw diameter of 45 mm and a length of 1350 mm, operating between 20-200 rpm. The machine includes five heating/cooling zones and a hopper volume of 0.1 m³. Ideal for those looking to enhance their extrusion capabilities. Contact us for more information about this machine. Application Types Extrusion

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Weber Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Crodpfx Ajxlcfkjbush Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 12,000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x KS 40 digital temperature controllers (PMA) Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1000 or 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours.

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 050, I am offering a single-screw extruder manufactured by Herbert Stork. The year of manufacture is visible on the type plate. The machine is fully operational! Codpfx Aovx Ul Tjbusrh Screw diameter: 30 mm, process length: 700 mm. Maximum screw speed: 120 rpm. Daynisco pressure sensor recently installed, with test protocol included. The system has been freshly serviced, including gearbox oil change and maintenance protocol. Partial documentation is available. Includes 5 different screws with various compression ratios, 2 of them with mixing sections. A 3 mm round die is currently installed; an adapter for other die connections can potentially be custom-made. A video showing the machine in operation can be sent via WhatsApp upon request.

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging Cedevfxqyopfx Abuorh 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW Crsdpfx Aexg I Eljbuoh In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Condition: used, Used Buss extruder PLK 100 for sale. The extruder was used in the powder coatings sector. Crjdpfxjvfd Uqj Abuoh The extruder is fully functional

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 320 kg This Krauss Maffei KME 30-25 was manufactured in 2016. It operates on a 3-phase 400 V system with a frequency of 50 Hz. The total input current is 31 A, with motor and heating currents at 15 A and 16 A respectively. It's a robust single screw extruder ideal for consistent performance. Contact us for more information about this machine. Cedpoxg Uknsfx Abusrh Application Types Extrusion

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 019, IDE single screw PVC extruder Crodpoxgh H Ajfx Abujh

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Codpfx Abou Itqdsuorh

Condition: new, functionality: fully functional, XTS56 - 24D Twin Screw Extruder Cedow Snlwspfx Abujrh • Water Cooled 130kW AC Motor and Drive. – Low Noise

Year of construction: 2002, condition: used, functionality: fully functional, Twin-screw extruder Leistritz ZSE40HP/X-800 Codpfx Aow Adfvsbuerh Year of manufacture: 10/2002 Process length: 36D (9 barrels) Motor: 80 kW Gearbox: 800 rpm Including volumetric dosing unit from Brabender (FW40/3 Plus - 50) and a water bath. There is also a spare gearbox included. The unit is now being decommissioned and put into storage.

Condition: excellent (used), functionality: fully functional, Brabender Single-Screw Extruder – 19 mm / 60 L/D – with Extensive Accessories Technical Data & Features: • Screw diameter: 19 mm • L/D ratio: 60 • 6 heating zones • Equipped with degassing • Cooling: fan and water cooling • Control via Brabender PL 2100 controller – allows computer connection and process analysis Csdpfxjw Iqidj Abuerh • Mobile unit with castors Accessories & Spare Parts: • Strand die • Flat film die • Temperature control units • Computer connection cable and interface • Various spare and wear parts Special Features: • Compact design • Ideal for laboratory and pilot testing • Comprehensive process monitoring and evaluation options • Ready for immediate use

Year of construction: 2013, condition: ready for operation (used), Additional Equipment Extruder (Krauss Maffei) Calibration table (Ide) Haul-off (Ide) Credpfx Aboxg Uidjujh Separation unit (Ide) Optionally a sawing unit (Battenfeld) can be purchased the capacity is 180 kg / h This twin screw extruder was manufactured in 2013. It features a robust 4m long base frame, galvanized and powder-coated for durability. The machine includes three liquid ring vacuum pumps and a motorized longitudinal adjustment of 400mm. It's equipped with a caterpillar haul-off capable of speeds from 0.7 to 14.0 m/min. Ideal for producing roller shutter profiles, the Krauss Maffei KMD 75 XS/P machine we have for sale represents a significant opportunity. Contact us for further details. Application Types Extrusion

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 035, Single screw PVC extruder Codpfx Abjxgh Dzeujrh

Year of construction: 1987, condition: ready for operation (used), A Weber single-screw extruder including an IDE coextruder and a cooling water basin is available. 1) Weber ET 45, year of manufacture: 1970, screw diameter: 45mm. 2) IDE MEB 30-25D, year of manufacture: 1987, drive: 3.8kW, screw speed: 6U-64U/min, screw diameter: 30mm, process length: 25D. On-site inspection is possible. Crsdpfxswu E Ats Abujh

Condition: excellent (used), functionality: fully functional, Berstorff Twin-Screw Extruder ZE (CL) 25 Technical Data: • Year of manufacture: 1997 Crodpfjw Iqhmsx Abuoh • Motor power: 11.6 kW • Heating capacity: 16 kW • Screw speed: 500 rpm Screw: • Co-rotating twin-screw extruder, 2 × 25 mm × 30 L/D • Modular construction (screw elements) • 2 × degassing zones • K-TRON twin-screw feeder Control: • Conventional contactor control • Control cabinet integrated into machine frame • Separate operating panel with control interface • Digital displays (temperature and melt pressure) as well as various indicator lights Miscellaneous: • Machine is connected and ready for testing • Test run possible by arrangement

Year of construction: 2025, condition: ready for operation (used), General Data Machine weight 1100 kg This Krauss Maffei KME 45 XS single screw extruder was manufactured in 2025. It features a 23 kW drive power, a maximum drive speed of 2486 rpm, and a screw diameter of 45 mm. The machine includes five heating/cooling zones and a maximum installed cylinder heating capacity of 10 kW. Ideal for high-quality extrusion capabilities. Contact us for more information. Application Types Crjdpfxoxg Ukbj Abush Extrusion

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Codpjxghz Hefx Abujrh

Year of construction: 1968, condition: ready for operation (used), A Weber extruder including cooling water basin is available. Screw diameter: 45mm. Documentation available. On-site inspection is possible. Crodpfx Aswu E Amebush

Year of construction: 2008, operating hours: 75,559 h, condition: ready for operation (used), Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply This Krauss Maffei KME 75-36 R AC single screw extruder was manufactured in 2008. It features a KM-GM 750 control integration with meter weight and mass throughput control, and a capacity of up to 750 kg/h granulate. The machine includes a connection for INDEX wall thickness measurement and is equipped with a EURO socket CEE 32 A - 6 H / 250 V. Contact us for more information about this machine. Application Types Extrusion Cjdpfx Aow Spt Nebujrh

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 021, IDE PVC single screw extruder Codpexghy Nefx Abuorh

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Crodpev Uz Awefx Abuoh

Year of construction: 2007, condition: ready for operation (used), General Data Cjdpsxcqm Rofx Abusrh Machine weight 5000 kg Injection Unit Screw diameter 61.6 Additional Equipment Dryer Feeder Strand chute Granulator This Leistritz ZSE 60MAXX-44D was manufactured in 2007. A twin screw extruder with a screw diameter of 61.6 mm and a high torque capacity of up to 3750 Nm, it offers up to 50% higher throughput potential than earlier models. Ideal for applications in plastics compounding and pharmaceutical extrusion. Consider the opportunity to buy this Leistritz ZSE 60MAXX-44D twin screw extruder. Contact us for more information about this machine. Application Types Extrusion

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 036, IDE single screw extruder for PVC profiles Cedjxghxrepfx Abujrh

Year of construction: 1995, condition: ready for operation (used), Injection Unit Screw diameter 50 Additional Equipment Cjdjxa H Sqjpfx Abuerh Dryer Feeder Strand chute Granulator This Leistritz ZSE 50 GL-36D twin screw extruder was manufactured in 1995. It features a screw diameter of 50 mm and an L/D ratio of 36:1, ideal for precise extrusion processes. Consider the opportunity to buy this Leistritz ZSE 50 GL-36D twin screw extruder. Contact us for more information. Application Types Extrusion