Used Extruded for sale (398)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: P02/194, Equipment: CE marking, The machine was completely refurbished between 2020 and 2021, including overhauling the spindle, electrical panel, installing a second filter, touchscreen, PLC, temperature control (solid-state relay), internet access, repainting, etc. Cedpfxez I Tghe Aiiori The machine is currently in production.

Condition: used, Year of construction: 1971, operating hours: 12,345,678 h, functionality: fully functional, machine/vehicle number: M4514, Slitting shear with adjustable table for rubber sheets. The desired cutting size can be variably adjusted, and the table feed is automatic. The shear operates smoothly. Credpfx Aijz Rm R Toioi

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition Crodpeycuuyjfx Aiioi For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: like new (used), Year of construction: 2006, operating hours: 4,545 h, functionality: fully functional, screw diameter: 114 mm, overall weight: 7,500 kg, A KMD114-32 P in like-new condition is for sale. Csdpfx Aozxhfijiisri This extruder comes from a technical institute and is therefore from a single owner. The operating hours are original and can be verified. The screw and cylinder are in like-new condition. The gearbox runs very smoothly. Includes adapter, hopper, and loading onto a truck. Technical specifications: - Year of manufacture: 2006 - Screw for profile: 684 2929 / 8880 - Internal screw temperature control, welded tips - Maximum screw speed = 17 min-1 - Maximum dosing speed = 260 min-1 - 5 cylinder zones, 15 tool zones + 4 lip heaters, melt temperature, melt pressure - C5 control system with puller control, language E/D An inspection in 84405 Dorfen is possible at any time. If you have any questions, please do not hesitate to contact us.

Year of construction: 2020, condition: good (used), functionality: fully functional, For sale: Farmet FE1000 Clever Max industrial feed / soybean / grain extruder. Manufacturer: Farmet Model: FE1000 Clever Max Year: 2020 Main motor: 110 kW Throughput: approx. 900–2,100 kg/h depending on material and process setup Condition: used, fully functional Location: Slovakia, EU The extruder was used for approx. 2 years. Additional accessories were never used according to seller information. Included: Farmet FE1000 extruder Clever Max control system PLC control with HMI touchscreen Frequency converter for the main drive Stainless steel steam conditioner Cutting head Electrical control cabinet Accessories as shown in the photos Suitable for: soybean extrusion full-fat soybean processing cereal and grain extrusion oilseed meal / press cake processing compound feed production pet food and fish feed applications, depending on recipe and final line configuration The Clever Max control system allows better adjustment of extrusion parameters through PLC/HMI control and frequency regulation of the main drive. This is a strong industrial extruder suitable for medium-capacity feed and oilseed processing plants. Sold as shown in the photos. Inspection possible. Loading possible. Worldwide shipping on request. Price: FCA Slovakia, plus VAT. Zu verkaufen: Farmet FE1000 Clever Max Industrie-Extruder für Futtermittel, Soja, Getreide und Ölsaaten. Hersteller: Farmet Modell: FE1000 Clever Max Baujahr: 2020 Hauptmotor: 110 kW Leistung: ca. 900–2.100 kg/h, abhängig von Material und Prozess Csdsxfcwmjpfx Aiieri Zustand: gebraucht, voll funktionsfähig Standort: Slowakei, EU Der Extruder war ca. 2 Jahre in Betrieb. Weiteres Zubehör wurde laut Verkäuferangabe nicht benutzt. Ausstattung: Farmet FE1000 Extruder Clever Max Steuerung PLC-Steuerung mit HMI Touchscreen Frequenzumrichter für den Hauptantrieb Edelstahl-Dampfkonditionierer Schneidkopf Schaltschrank Zubehör wie auf den Fotos Geeignet für Sojaextrusion, Vollfettsoja, Getreide, Ölsaaten, Presskuchen, Mischfutter sowie Pet-Food- und Fischfutter-Anwendungen je nach Rezeptur und Linienkonfiguration. Besichtigung möglich. Verladung möglich. Versand auf Anfrage. Preis: FCA Slowakei, zzgl. MwSt.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 13,863 h, screw conveyor diameter: 90 mm, screw conveyor length: 2,880 mm, Krauss Maffei twin-screw extruder KMD90-32 in very good condition for sale. The extruder comes from a technical center and has seen little use. These are the original operating hours (13,863) from the first owner. An inspection with a test run is possible at any time. Technical data: - Year of manufacture 2004 - Original operating hours: 13,863 - Standard screw profile with up to 390 kg output per hour - C4 control system Cedpfx Aisz Ag Udsiori - Internal screw temperature control, welded screw tips - Including hopper, adapter, sensors, etc. - Screws and cylinder are in new condition. The screws have been removed and can be inspected on-site. Loading with a forklift. Delivery, export documents or sea packaging available upon request.

Condition: excellent (used), Year of construction: 2004, Complete Bandera extrusion line, diameter 110/27d, for window profile extrusion, with conical co-extruder Weber CE7, diameter 51/104. Metering units Calibrating table Vertical extruder for seals Cjdpfx Aj Agc Hujiijri Haul-off unit from 2011 Saw Receiving table

Condition: like new (used), functionality: fully functional, Year of construction: 2023, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Crjdpsq R Tkwjfx Aiiei Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, screw diameter: 62 mm, Details: co-rotating, degassing, vacuum pump, segmented screws and cylinder, opportunity for side feeder Cjdpfxsxu Db Ee Aiiori

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Credpfx Ajumubyoiiei Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, Haul-Off, used Codpo Ahgraofx Aiieri Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Passage height: max. 100 - 200 mm Passage width: max. 450 mm Effective contact length: 2400 mm Haul-off speed: stage 1: 0.5 - 4.0 m/min., stage 2: 1.0 - 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function

Year of construction: 2009, condition: used, Used Baker Perkins model MP24PH 40:1 L/D twin screw extruder. - Manufacturer: Baker Perkins - Model: MP24PH 40:1 L/D - Number of screw: Twin Screw Extruder - Rotations: co-rotating - Screw speed range: 0 - 600 rpm - Motor power: 11.2.5 kW, variable speed Barrel: - Maximum operationg temperature: 200°C - Nominal barrel lenght: 40:1 L/D - Barrel type: one piece horizontally split clamshell barrel - Heating: electrically heated via cartrige type heaters Codpfx Aszvn Dasiieri - Cooling: water-cooled via cored barrel backing block Includes: - Touch HMI integrated in switchboard - Single screw powder feeder - Liquid feed system - liquid hopper, gear pump and flow meter

Condition: good (used), Year of construction: 2008, This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine is from 2008 and in excellent condition. Brand: Kuhne GmbH Model: K 60E - 33D Screw type: single screw Year of construction: 2008 Screw diameter Ø: 600 mm L/D ratio: 33 Cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm Codpfjz Egy Nox Aiiori

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Cjdpfo Agvygjx Aiisri Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR220 (2-line version) ± 100 L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 18,5 Kw - 978 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 150L Single mixing shaft execution with adjustable paddles Motor 1.5 KW - 1461/64 rpm Extruder BR220 Dual execution, 2 extrusion heads Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm Possibility to run 2 separate products, 2 extrusion lines on 1 frame. without electric cabinet and controls

Condition: good (used), Year of construction: 2008, screw conveyor diameter: 75 mm, Type: KME 75-36 R AC Year of manufacture: 2008 Capacity: Screw ø 75-36D; approx. 660 kg/h Crjdpfe Abnidox Aiioi Condition: Functionality tested Drive: A.C. motor 182.0 kW Note: Co-extruder, year of manufacture 2015

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 7 / 8939 / 05 / 21, Used Reifenhäuser extruder Type: RH-241-1-50-30 WE DC-motor with 37 kW capacity Cedpfjw Np Tkox Aiiori screw dimensions : diameter 50 mm – 30 L/D Grooved feeding zone With manual screen changer Fully functional You are welcome for inspection this (and further) extruders in our warehouse Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 2025, condition: like new (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales. Cedez Eg S Eopfx Aiieri

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Crsdpfsyc Sfpox Aiioi Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: used, Year of construction: 1999, A complete extrusion line is available, equipment: 5x control cabinets, 1x frequency inverter for the main drive, 1x frequency inverter for ZSB/heating, 1x PLC control system, 1x feeder, 1x vibrating screen with Congrav, 2x pre-feeders from Brabender, 2x gravimetric feeders from Brabender, 1x volumetric feeder from Brabender, 1x Coperion ZSK 58 Mc twin-screw extruder, 1x ZS-B 58, 1x frequency inverter cabinet, 1x SL cabinet with Siemens S7-300 control system, 1x local control cabinet at the machine with integrated EPC NT operator terminal with LM3 from Brabender, 1x cooling unit, 1x complete strand pelletizing system, 1x classifying screen with extraction system, 1x pair of spare screw shafts with screw elements, material 15, unused, total weight of the system: 5.843t, with documentation. An on-site inspection is possible. Cedpfs Aa Aldsx Aiijri

Year of construction: 2000, operating hours: 811 h, condition: used, functionality: fully functional, machine/vehicle number: 292, IDE Co-extruder MEB 38/2 - Motor: 5.2 kW / Max. screw speed: 42 rpm - Screw diameter: 38 mm - Screw length: 25D - Smooth, single-piece barrel - 4 barrel heating zones - 1 flange heating zone - 1 die heating zone - KS 40 controller - 3-zone screw - Die connection: IDE M48x2 - Melt pressure and melt temperature measurement - Height-adjustable Crsdpfx Aiszmnp Reiei - Tilt-adjustable - Barrel and screw in very good condition - First-hand ownership, very well maintained, only 811 operating hours, used only in a technical center.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Cjdpfx Aioztu Dboiori Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: DS70 086, total length: 3,500 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 3,000 kg, Parallel twin-screw extruder - Manufacturer: WEBER - Type: DS 7.22 - Year: 2006 - Parallel twin screw, ø70mm, 22LD - 5 heating zones on the cylinder + 2 cooling zones Crodozxr Uuepfx Aiiei - Motor: 30kW - Up to 40 rpm - Up to 180kg/h - tube and 120kg/h - profile (depending on material and tooling)

Condition: good (used), Year of construction: 2008, screw conveyor diameter: 75 mm, Capacity: Screw conveyor, ø 75-36D; approx. 600 kg/h Drive: A.C. motor, 182.0 kW Credpfxo Abc Hks Aiiji

Year of construction: 1995, condition: good (used), functionality: fully functional, Bausano complete granulating line, including generator. Codpfezcarqex Aiieri Output: 350-400 kg/h.

Year of construction: 2002, condition: good (used), functionality: fully functional, An ultra reliable 130 / 160mm OMP Prealpina plastics extruder, supplied by ourselves back in 2002. I have know the extruder history since new as i was the supplying agent originally. Originally supplied to reprocess confectionery Polypropylene films with 100% heavy print on the film , it performed very well in degassing and compounding the plastics materials till that contract expired. The extruder is a cascade version , allowing significant extra gas venting and polymer mixing, by utilizing a second short barrel 160mm extruder to deliver molten and clean plastic to a die face cutter, followed by a centrifuge to dry the pellet. The line has recently been fitted with an ultra efficient FIMIC fully automatic screen filter, providing probably the most efficient filtration available to plastics recyclers. being a cascade configuration , with superior filtration and venting , the line is most suitable for difficult plastics films or fibre recycling. The line has a 7 cu metre silo feeding directly into a force feed conical delivery system to the feed zone of the 130mm extruder. There is a master batch/ additive feeder included. The line was sold to a company in Lituania from its earlier owner in the UK in 2022 , but the plastic feedstock thought to be available in Lithuania never materialised. The line has been stored since, and is still dismantled and able to be shipped immediately to a new buyer. Csdpfx Aiezwhtdjijri