Used Eisele Lms 2 for sale (118)

Condition: used, CIRCULAR SAW WITH AUTOFEED Technical characteristics: DIAMETER DISK 380 mms Comments: MAGGOT in GERMANY Bjde Dv Raepfx Adredd

Year of construction: 1993, condition: used, Milling cutter diameter: 300 mm Bdodpfx Asrv A Hmsdrsd Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamping Minimum quantity spray device Manual feed Weight: approx. 280 kg

Condition: used, Heavy saw head with robust base and material clamp for non-ferrous metals and aluminium. More powerful motor, with pneumatic feed and 2 pneumatic material clamps. Bdsdjzap Hfopfx Adrjd

Condition: new, Manufacturer: Behringer Eisele Type: VMS 350 Condition: NEW Machining cross section max. round at 90° 120 mm Machining cross section max. rectangle at 90° 170 x 100 mm Machining cross section max. round at 45° 120 mm Bdjdpoy S Eytsfx Adrsd Machining cross-section max. rectangular at 45° 120 x 100 mm Saw blade diameter 350 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 17 rpm / 34 rpm Machine head swivels 45-90-45-30° Total motor power 1.4/1.9 kW Width 900 mm Length x width x height 1050 x 900 x 1900 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Behringer Eisele VMS 400 A metal circular saw for processing almost all steel qualities. Integrated coolant unit and micro-spraying system, selectable in the control system as required Hydraulic saw feed and quick clamping vice with clamping pressure reduction NC control with graphic display and keypad 3 selectable operating modes (manual mode, series and single cuts) Convenient stroke adjustment of the saw unit via clamping lever Can be combined with infeed and outfeed roller conveyors Manufacturer: Behringer Eisele Type: VMS 400 A metal circular saw Year: 2013 Condition: used, very good Flat 90 ° [mm] 200 x 120 Flat 45 ° [mm] 140 x 120 Flat 30 ° [mm] 100 x 100 Square 90 ° [mm] 120 Square 45 ° [mm] 120 Square 30 ° [mm] 100 Round 90 ° [mm] 140 Bsdpey S Eygjfx Adrjdd Round 45 ° [mm] 140 Round 30 ° [mm] 110 Feed length 800 mm Drive power 2.0 / 2.6 kW Speeds 8 / 16 / 32 / 64 min-1 Saw blade diameter 400 mm Saw blade feed hydraulic Material feed ball screw Hydraulic clamping device Minimum quantity lubrication Chip clearing brush Length 3,100 mm Width 1,500 mm Height 2,000 mm Weight 1,350 kg Material support height 920 mm Scope of delivery: Documentation 4x saw blades 1x feed roller conveyor 2m

Condition: good (used), Year of construction: 2023, machine/vehicle number: 1018842, Offer 26151 Technical data: - Saw blade diameter: up to 450 mm - Cutting range with a saw blade diameter of 450 mm: - at 90°: round 150 mm - square 140 mm - flat up to 300 x 95 mm - Miter adjustable: 30° - 90° - 30° Bdsdpfey Uwpxsx Adrsd - at 45°: round 150 mm - flat 280 x 300 mm - Cutting speeds: 10 / 20 1/min - Feed rate of the saw blade: 0 - 1150 mm/min - Rapid return: 3000 mm/min - Connection: 400 V / 4.8 kW - Hydraulic material clamping device, steplessly adjustable clamping pressure - Adjustability of the backstop - via handwheel with analog display: 0 - 120 mm - Hydraulic material backstop clamping device - Micro-spray cooling system - Original infeed roller conveyor: 4000 mm - Original outfeed roller conveyor with measuring stop + digital display: 4000 mm - Space requirement: approx. W 1050 x H 1950 x D 1400 mm - Weight: approx. 1200 kg

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 4867, Pressta Eisele Stamping Machine HE 40 S Bjdpey Tizksfx Adrsdd Price: 2,000 Euros

Condition: good (used), Year of construction: 1996, Punch, complete with base frame Hydro-pneumatic drive ■ Operation via foot valve ■ Stroke length max. 40 mm ■ 25 double strokes / min. ■ Installation height max. 250 mm 130 mm projection Bdodotk Ul Rjpfx Adrjd ■ Projection with turntable 90 mm ■ Table top height 950 mm ■ Tappet force 90 KN at 10 bar

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Foot valve operated Max. daylight = 280 mm Dimension 60 x 850 x 1500 mm Bdjdpefitbwjfx Adred Weight 300kg

Year of construction: 1992, condition: excellent (used), Transmission of power hydropneumatic / hydraulic Bdsdpfx Aefcbb Hedrsd

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, ■ Punching machine, complete with base frame ■ Hydro-pneumatic drive ■ Operated via foot valve ■ Max. stroke length: 40 mm Bdjdpfxjy S Abbe Adrsd ■ 25 double strokes/min. ■ Max. installation height: 250 mm ■ Throat depth: 130 mm ■ Throat depth with rotary table: 90 mm ■ Table top height: 950 mm ■ Ram force: 90 kN at 10 bar

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, for processing aluminum and steel profiles with 1 vertical milling motor, 1.1 kW drive, 220/240 V, 50/60 Hz Speed: 7,000 – 11,000 rpm 2 pneumatic indexing pins, with indexing pin 5/8/10 mm Pneumatic workpiece clamping: 2 horizontal clamping cylinders 1 pneumatic spray nozzle Milling area, length/depth: 365 x 230 mm Bdsdpfsy S Aa Dox Adrjd Profile height max. 150 mm, profile width up to 300 mm Operation via switch and 2 hand levers

Condition: excellent (used), LENGTH STOP AND MEASURING SYSTEM Eisele 300mm Bdsdpeiraqfjfx Adrjd

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S Bdodpequuufefx Adrod MATERIAL FEED SPEED ..... MAX. 350 MM/S TENSION FORCE ..... MAIN CLAMP 10500N

Condition: like new (used), Year of construction: 2019, functionality: fully functional, PRESSTA CYKLON D double-head automatic screwing machine with all accessories for sale. Package deal: if purchased together with the WM740 welding line and SMC350 machining center, which are also listed in our ads, the price is EUR 180,000. Bdedpfxeyziu Te Adrsd

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Bdodpfx Ajqzmnuedrjd Machine was in operation until dismantling Further technical data on request or see photos

Condition: used, Year of construction: 1979, saw blade diameter 300 mm cutting diameter 100 mm Bjdpfx Adey N D Nnjrsdd saw blade turning speeds 40 / 80 U/min capacity 90 degrees: square 90 mm capacity 90 degrees: round 100 mm total power requirement 1,5 kW weight of the machine ca. 0,5 t

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Specification: - Equipped with 1 vertical and 2 horizontal milling motors - Pneumatic workpiece clamping with 2 horizontal clamping cylinders - 3 pneumatic spray nozzles - Milling area of the vertical motor (L x D): 365 x 230 mm - Milling area of the horizontal motors (L x H): 250 x 100 mm - Maximum profile height: 150 mm Bdodpfx Asy Nm Ersdrsd - Operation via switches and 4 hand levers

Condition: good (used), Year of construction: 1994, machine/vehicle number: A 3883, Offer 24310 Technical Data: Bdjdey Nlthepfx Adrsd - Manual saw blade feed - Workpiece clamping in machine vice - Saw blade diameter: 315 mm - 2 cutting speeds: 40 - 80 m/min - Cutting capacity at 90°: round 110 mm - Rectangular 82 x 160 mm - Square 82 x 82 mm - In mitre at 45°: round 110 mm - Rectangular 80 x 120 mm - Square 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Required space approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg

Condition: excellent (used), functionality: fully functional, Large fully hydraulic EISELE: Weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Motor power: 2.6 / 3.2 kW Hydraulic saw feed Hydraulic vice Cutting ranges: 200 x 100 mm (square tube) Bdjdpfx Aey Ncfuedrod Mitre cut one-sided 45°.

Condition: excellent (used), Year of construction: 2017, Year: 2017 Bodpfx Asy Naz Tsdrsdd - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

Year of construction: 1997, condition: excellent (used), A used, very well-maintained cold circular saw from EISELE, equipped with a 370mm circular saw blade, steplessly adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting range: Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100/100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865x1332x2175mm Weight: 460kg Further technical data can be found in the PDF document. Bedekfp D Tjpfx Adrodd Technical data and dimensions: Subject to change.

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. Bdsdpsyyxxfefx Adrjd • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Condition: used, Year of construction: 1990, saw blade diameter 300 mm cutting diameter 90 mm turning speeds 40/80 U/min total power requirement 1,5 kW weight of the machine ca. 350 Kg dimensions of the machine ca. 0,9 x 0,8 x 1,5 m Cold circular saw Bdsdpfey Ehx Eox Adred - Machine light - Coolant system

Year of construction: 1996, condition: used, Hydropneumatic operation Punching force: 50 kN Work hub: 35 mm Overhang: 110 mm Bdodpfx Adjyxpw Nerjd Installation height: 140 mm