Used Emag Vsc 200 for sale (139)

Condition: used, Year of construction: 1994, weight je 6 t Ksdpeu T Sfhjfx Affsfa 2 ja ja control Siemens

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 200 mm, spindle speed (min.): 6,000 rpm, overall weight: 6,500 kg, power: 40 kW (54.38 HP), year of last overhaul: 2023, Equipment: documentation/manual, Both machines form a single unit. Year of manufacture: 2003, fully functional and still in operation. See photos. The machines are equipped with a chip conveyor serving both machines. A coolant tank was subsequently installed. Accessories include various holders, jaws, and one new AGW. The machine can still be inspected under power and in operation. Kfedpfsxq Aruox Affsa

Year of construction: 1999, condition: ready for operation (used), There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation. Kedjm H Urhspfx Affjfa

Condition: good (used), Year of construction: 1998, Emag VSC 200 with workpiece conveyor and chip conveyor. The main spindle bearings were replaced in 2005. Control: Siemens 840D Kfedpfx Aetq Ifnjffsa Turning diameter: Ø 260 mm. Turning length: approx. 200 mm. Machine dimensions: Length: 3,200 mm, width: 1,800 mm, height: approx. 2,650 mm. Machine weight: approx. 6,500 kg. The machine was only used in 1-2 shift operation.

Condition: ready for operation (used), Year of construction: 2003, Two identical Emag CNC machining centers including a chip conveyor, coolant tank, various holders, jaws and a new AGW are available. Chuck diameter: 200mm, max. circulation diameter: 290mm, max. workpiece length: 140mm, speed: 6000rpm, power: 34kW, torque: 480Nm. Travel X/Z: 550mm/200mm, rapid traverse X/Y: 30m/20m/min, feed force X/Z: 11kN. Tool positions: 12, drive tool power: 7.8kW. Machine dimensions X/Y/Z: approx. 2700mm/1150mm/2800mm, weight: approx. 6500kg. Documentation available. On-site inspection is possible. Kjdpfx Afewi Tpqjfefa

Year of construction: 1986, condition: used, tool adaptor KOMET PKB 200-20-112 weight of the machine ca. 700 kg Kedpfsunuzcex Affefa dimensions of the machine ca. 1,6 * 0,7 * 1 m

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 1500 mm Measurements depth 3900 mm Measurements height 3200 mm Machine weight 7000 kg Control Unit Model SINUMERIK 840Dsl Brand SIEMENS Main Drive Spindle speed range 4500 rpm Spindle motor power 18kW at 100% duty cycle, 28kW at 40% duty cycle Tool taper DIN 55026 - A6 Number of axis 2 Movement X-Axis Movement 745mm X-Axis Rapid Traverse 60m/min Z-Axis Movement 300mm Z-Axis Rapid Traverse 30m/min Media Chip conveyor Yes Internal cooling Yes Additional Equipment Coolant tank capacity: 360 liters This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28kW power at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. Kedox D Eu Espfx Affefa Application Types Turning

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 100226, The submission of a bid obligates you to collect on time in week 1 or week 2 of 2026! Kfjdpfx Afexzt R Nsfsa MACHINE DETAILS Total weight: 10,000 kg Electrical connection Mains type: 3~ Frequency: 50 Hz Operating voltage: 400 V General control voltage: 24 V Valve control voltage: 24 V Connected load: 36 kW Rated current: 56 A Main fuse: 80 A Lighting connection: 24 V Lighting connection power: 18 W

Year of construction: 2015, condition: ready for operation (used), A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible. Kfodpfx Afsx Dm Dzsfja

Condition: used, Year of construction: 2016, Technical details: total power requirement: 55 kW weight of the machine ca.: 13 t We offer you 21 x EMAG complete € 50.000 free loaded Kfjdpfx Afoxy I Exsfea new EMAG is around € 500.000 *

Condition: excellent (used), Year of construction: 2009, operating hours: 67,343 h, functionality: fully functional, All data will be provided upon request regarding this listing. The machine is dirty. Up until July, the machine delivered top tolerances at MAGNA POWERTRAIN and is otherwise in fully functional condition. Kfsdpfx Asxl Ah Seffoa

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,284 h, functionality: fully functional, feed length X-axis: 685 mm, feed length Z-axis: 200 mm, travel distance X-axis: 685 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 250 mm, rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, total length: 3,100 mm, total height: 2,650 mm, total width: 4,000 mm, rotational speed (max.): 6,000 rpm, torque: 460 Nm, overall weight: 7,800 kg, controller model: Siemens 840D, control type: CNC control, Equipment: cooling unit, For sale is an EMAG VSC250, year of manufacture 2008. Equipped with a Siemens 840 D control system. Features: - Infeed and outfeed conveyor (O-belt) - Pneumatically operated transfer unit Kfodpfxew Dyqdo Affea - Stamping unit - Chip conveyor (ejection left) - Coolant system - Tool turret 12x VDI40 The machine is powered and available for inspection.

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 1500 Measurements depth 3900 mm Kjdpfjx D Eu Sjx Affefa Measurements height 3200 mm Machine weight 7000 kg Control Unit Model SINUMERIK 840Dsl with integrated PLC S7-300 Brand SIEMENS Main Drive Spindle speed range 4500 Spindle motor power 18 kW (100% duty cycle), 28 kW (40% duty cycle) Tool taper DIN 55026 - A6 Movement X-Axis Movement 745 mm X-Axis Feed Force 10 kN X-Axis Rapid Traverse 60 m/min Z-Axis Movement 300 mm Z-Axis Feed Force 10 kN Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 6 kg Tools Slots in storage 12 Additional Equipment Hydraulic 6-jaw special chuck from EMAG with face clamping device and central lubrication 15-inch TFT monitor V24 interface This EMAG VSC 250 vertical turning machine was manufactured in 2011. It features a Siemens SINUMERIK 840Dsl control system, a robust hydraulic 6-jaw chuck, and a flange turret with 12 tool positions. With a spindle speed up to 4500 rpm and a main spindle drive power of 28kW at 40% duty cycle, it's ideal for precise, efficient operations. For more information about this vertical turning machine, please reach out to us. Application Types Turning

Condition: good (used), Year of construction: 2002, Machine type: CNC Lathe Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Kjdokyrwwjpfx Affofa Serial number: M02.43446 Year of manufacture: 2002 Available immediately Ex site for self disassembly Optionally we can offer dismantling and loading

Condition: used, Year of construction: 2001, Offered is a vertical single spindle pick up turning machine EMAG VSC 250 built 2001. The machine is equipped with a conveyor belt (O-Type) that runs through the machine. The automation belt is loaded with workpieces at the front of the machine. The work area has one working spindle and one turret with 12 tool positions. Other accessories such as a chip conveyor, coolant equipment or independent extractor unit are not included in the advertisement. The machine was taken out of service a few years ago. After inspection, the VSC 250 is fully functional and in good condition, as can be seen in the pictures. The machine has been completely cleaned and repainted. All control cabinet components and cables are still in their original condition. COTROL Siemens Powerline Ksdpfx Aotrwdteffofa TECHNICAL DATA workpiece diameter: max. 200 mm workpiece height: max. 150 mm swing diameter: 250 mm X-stroke: 685 mm Z-stroke: 200 mm MAIN SPINDLE power: 28 kW speed: max. 6000 rpm TOOL CARRIER 1x disc turrets, 12x D40 without driven tools The machine is sold without any warranty claims. Delivery time of the machine on request.

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or * Kfsdpeia Rtdofx Affja

Year of construction: 2014, condition: like new (used), machine/vehicle number: 105488, Technical data: Chuck diameter max. 250 / 315 mm Swing diameter 350 mm Workpiece diameter max. 250 mm Traverse path: X-axis:745 mm Z-axis: 300 mm Loading times: Loading times (depending on workpiece) s 4 - 6 Kfjdsfyaaispfx Affsa Main spindle: Spindle flange DIN 5502: 6 Spindle bearing, front through. Max. 110 mm Speed max. 5500 min. Disc turret: Number of tool holders: 12 Shank diameter: 40 mm Driven tools Maximum power: 8,5 kW Speed: max. 6000 min Turret swivel time: 0.3 s Control: Bosch Rexroth MTX

Condition: used, TECHNICAL DETAILS - Max. turning Ø : 520 [mm] - Strokes (X/Z) : 1000 / 400 [mm] - Max. push on X and Z : 1100 [daN] - Quick feeds (X/Z) : 45 / 30 [m/min] - Ball screw diameter (X/Z) : 50 [mm] - Spindle nose : A2-11 - Spindle motor power : 71 [kW] - Spindle speed : 0 - 3400 [Rpm] - Max. chuck torque : 750 [Nm] - Number of positions on turret : 12 - Number of motorized positions : 12 Kfedpfxjuhbfgo Affsa - Tool-holder type : VDI50 - Machine alone dimensions : 4.050 x 1.960 [mm] - Installation dimensions : 8.500 x 5.000 [mm] - Machine weight : 13.500 [kg] - Installed power : 45 [kW] - Electric supply : 400 V, 50 Hz EQUIPMENT - CN SIEMENS 840D - Interface : RS232 / RJ45 / USB - Touch part sensor Marposs - 1 fixed tool support on table : Capto C6 - Lubricating tank - HP coolant tank : 23 [bars] - Cooling tank - Chip conveyor KNOLL - Part conveyor capacity : 70 - 320 [mm] - Rotary tool holders number : 6 - Fixed tool holders number : 6 - Chuck 3 jaws Forkhardt Ø : 400 [mm]

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. Kfjdot Hxa Tspfx Affja * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2012, turning diameter 400 mm swing diameter 420 mm Ksdsvxwx Ajpfx Affofa x-travel 850 mm z-travel 315 mm spindle head DIN 55026 - Size 11 spindle bearing diameter 140 mm turning speeds max. 4000 U/min tool turret 12 times C5 Capto rapid traverse x + z axis 45 / 30 m/min feeding force 11 kN total power requirement 58 kW weight of the machine ca. 9 t dimensions of the machine ca. 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 685 mm, travel distance Z-axis: 200 mm, workpiece diameter (max.): 200 mm, workpiece height (max.): 150 mm, turning diameter over bed slide: 250 mm, The machine has been fully cleaned and newly painted! TECHNICAL DETAILS Machining Area Workpiece diameter: max. 200 mm Workpiece height: max. 150 mm Swing diameter: 250 mm Axes X-axis travel: 685 mm Z-axis travel: 200 mm Main Spindle Kodpfx Aow Hzupsffsfa Main spindle power: 28 kW Main spindle speed: max. 6,000 rpm MACHINE DETAILS Control: Siemens Powerline EQUIPMENT Round belt 1x disc turret, 12x D40

Condition: used, Year of construction: 2015, Technical details: Kfjdsq Sc Hujpfx Affsa turning diameter: 200 mm swing diameter: 260 mm turning height: 60 mm

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 105488, Technical data: Chuck diameter max. 250 / 315 mm Swing diameter 350 mm Workpiece diameter max. 250 mm Traverse path: X-axis:745 mm Z-axis: 300 mm Loading times: Loading times (depending on workpiece) s 4 - 6 Main spindle: Spindle flange DIN 5502: 6 Spindle bearing, front through. Max. 110 mm Speed max. 5500 min. Disc turret: Number of tool holders: 12 Shank diameter: 40 mm Driven tools Maximum power: 8,5 kW Speed: max. 6000 min Kodpfx Afswfgzlsfsfa Turret swivel time: 0.3 s Control: Bosch Rexroth MTX

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 103342, travel distance X-axis: 850 mm, travel distance Z-axis: 315 mm, spindle speed (max.): 3,400 rpm, turning diameter: 340 mm, TECHNICAL DETAILS Turning diameter: 340 mm Swing diameter: 420 mm Turning height: 315 mm X-travel: 850 mm Z-travel: 315 mm Control: Siemens 840 DSL Spindle Spindle speeds (infinitely variable): 0 - 3,400 rpm Main motor power: 37 (48) kW Feed Feed range in X-direction: 0 - 45 m/min Kjdpev T U T Hefx Affefa Feed range in Z-direction: 0 - 30 m/min Tool Tool system: 12-station turret head Tool drive power: 19 kW Tool speeds: 0 - 6,000 rpm MACHINE DETAILS Total power requirement: 60 kW Machine weight: approx. 12 t Space requirement: approx. 3.7 x 3.1 x 3.3 m EQUIPMENT - CNC vertical lathe - Automatic workpiece feed

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For Sale: Used EMAG VSC 250 Vertical CNC Lathe (Year of Manufacture 2011) - High Precision and Automation We are offering for sale a used EMAG VSC 250 Vertical CNC Lathe from the year of manufacture 2011. This machine is designed for efficient and precise turning operations, especially for workpieces weighing up to approximately 6 kg. Thanks to its vertical design and advanced automation, this machine is ideal for medium to large-series production, ensuring high efficiency and repeatability. Main Features and Capabilities: • Vertical Design: Optimal chip evacuation and easy loading/unloading. • Control: Siemens SINUMERIK 840Dsl with integrated PLC S7-300 and a 15-inch TFT monitor. • High Precision: Positioning accuracy in X and Z axes is ±0.001 mm. • Main Spindle: High power and wide speed range. • Automated Loading/Unloading: Parts are fed to and removed from the machine via integrated automation. • Live Tools: The possibility of using live tools extends the machining range to include drilling and milling. Technical Data (EMAG VSC 250): • Manufacturer: EMAG • Year of Manufacture: 2011 • Machine Number: 103035 1. Main Drive: * Connected Load: 400 V/50 Hz / 43 kW * Drive Power of Main Spindle (100% ED / 40% ED): 18 kW / 28 kW * Main Spindle Torque: 300 Nm * Speed Range: 0-4500 rpm * Spindle Head: DIN 55026-A6 * Max. Workpiece Weight: ≤ approx. 6 kg 2. Chuck: * Hydraulic 6-jaw special chuck from EMAG with face clamping device and central lubrication. * Type: 6AGF 260 K6 K14 * Diameter: 260 mm * Weight: 57 kg * Max. Clamping Force (internal clamping at 50 bar): 12.8 kN * Max. Clamping Force (external clamping at 50 bar): 4.2 kN * Clamping Jaws: Special gripper jaws EMAG: HB-I-G-146-K14 for machining brass sheet (6-fold). * Adapter Jaws: (6-fold) L90x840xH50 with fine serration (SAV). * Weight of Adapter Jaw Set: 5.53 kg. * Soft Gripper Jaws: SMW MWB-DA 165 No. 03611 L70x B40x H60. * Weight of Soft Jaw Set: 2.70 kg. 3. Working Area: * Travel X-axis: 745 mm * Travel Z-axis: 300 mm * Rapid Traverse X-axis: 60 m/min * Rapid Traverse Z-axis: 30 m/min * Feed Force X-axis: 10 kN * Feed Force Z-axis: 10 kN 4. Control: * Siemens SINUMERIK 840Dsl with integrated PLC S7-300. * 15-inch TFT Monitor. * V24 Interface. 5. Working Accuracy: * Axes (X-axis / Z-axis): ±0.001 mm * Spindle (C-axis): ±0.01° 6. Tool Carrier: * EMAG Flange Turret Generation C361 - VDI 40. * Tool Stations: 12. * VDI Holder Shank Diameter: 40 mm. * Max. Tool Dimensions: Workpiece-dependent. * Tool Change Times (Turret / Live Tool): 0.03 min / 0.04 min. * Max. Speed of Live Tool: 6000 rpm. * Max. Torque of Live Tool (100% ED / 10% ED): 15 Nm/3.5 kW / 40 Nm/8.5 kW. 7. Coolant System: * Standard Delivery Pressure / Max. Delivery Pressure: 7 bar * Pressure Range of Internal Coolant Supply: 7 bar (not adjustable) * Coolant Tank Capacity: 360 liters 8. Part Catcher: * No part catcher available. Parts are fed to and removed from the machine via automation. 9. General: * Machine Dimensions (L x W x H): 3900 mm x 1500 mm x 3200 mm * Machine Weight: approx. 7000 kg * Ambient Conditions (Room temperature / Air humidity): up to approx. 30°C / max. 50% * Noise Level (Sound Pressure Level / Sound Power Level): 78 dB(A) Location: Zabrze, Poland Kfjdpfxowp Ukvs Affja Keywords: vertical lathe, CNC lathe, EMAG VSC 250, metalworking, turning, production machine, used lathe, Siemens Sinumerik 840Dsl, automation, live tools, Zabrze, Poland.