Used Eisele Lms 2 for sale (98)

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm at 90°, square: 100 mm at 45°, square: 95 mm Nkedpfjxln Uksx Ahvow 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm cutting speeds: 12,5 - 25 m/min Njdpfx Aheh I Dvnsvokw forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm weight: 940 kg

Year of construction: 1969, condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm Nedpfxed Rxw Ss Ahvskw cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm weight: 720 kg

Year of construction: 1979, condition: good (used), machine/vehicle number: 2001, disk of circular saw-Ø: 400 mm Nodpfx Ajfnrw Sohvokw cutting area at 90° round: 95 x 240 mm cutting area in mitre at 45° round: 75 x 180 mm disk rotations: 10,5 u. 21 upm engine: 380 V, 2,6/3,2 kW space needed: 1500 x 1100 x 2150 mm weight: 630 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, saw blade diameter: 120 mm, O F F E R We can offer you the following ex stock, subject to prior sale and errors excepted, without obligation: EISELE Vertical cold circular saw with mitre cut Type VMS II – 350 PV Year of manufacture 2010 _____ Max. saw blade diameter 350 mm Saw blade speeds 40 / 80 rpm Workpiece diameter 90 mm Swivel range of saw table 0 – 90 degrees Continuously adjustable pneumatic feed 0 – 10 (?) Approx. weight 350 kg Features: • Adjustable workpiece length stop, mounted on the right - Max. adjustable length: 500 mm • Pneumatic workpiece vice – clamping width 160 mm • Minimum quantity coolant system (MMKS) for saw blade • Adjustable depth stop Nedpjyub N Uofx Ahvekw

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fully automatic operation Drive 7.5 kW, S6, 400 V, 50Hz, 2850 rpm For use with saw blades D 550 mm Cutting range 270x140 mm (width x height), D 185mm Max. profile width 270mm Control unit with display Including piece counter Including reversing device for a maximum cut length of 3000mm Automatic shut-off via limit switch when material ends Hydropneumatic saw blade feed, continuously adjustable, from bottom to top Vertical and horizontal clamping units, on both infeed and outfeed sides of the saw head Nkedpfx Ahsyvtyvovjw Pneumatic dosing spray device Cutting gap extension on both sides of the saw blade Electronic material feed unit 3-600mm feed length, with ball screw spindle and servomotor Including pneumatic horizontal and vertical clamping device Remnant piece from 75mm, depending on profile 2 extraction ports D 100 mm Safety guard over the saw head and feed unit A suitable extraction system can also be offered!

Condition: excellent (used), Year of construction: 1995, As-new notching milling machine from a training workshop Nkodpfx Ajyrh Rgjhvow Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Heavy-duty saw head with robust base and material clamp for non-ferrous metals and aluminium. More powerful motor. Nodpfxjyrz Rge Ahvekw

Condition: good (used), Year of construction: 1985, Eisele VMS III S.PV cold circular saw Manual saw blade feed Vice Max. saw blade diameter: 350mm Nodpfoiyzccsx Ahvskw Miter cuts of 90-30 degrees Cutting performance (straight cuts):Flat profiles: 200 x 90 mm Pipes: 120mm diameter Square tubes: 90mm Solid material: 100mm Cutting performance (miter):◾Flat profiles: 140 x 90mm Pipes: 120mm diameter Square tubes: 90mm Solid material: 100mm Speeds: 34/68 rpm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Universally applicable due to double adjustable punching units For corner angles with groove dimensions from 25 to 60 mm and profile chamber offset from 0 to 40 mm Infinitely height-adjustable sensors, punching blades, and back gauge inserts Sensors and punching units are fitted with scales Retractable back gauge for easy profile insertion, self-adjusting when advancing against the profile Hydraulic back gauge locking Pneumatic pressing process via a lever system ensures synchronized punching Max. back gauge height: 120 mm Profile heights up to 190 mm under pressure pad Punching height up to 150 mm Profile widths up to 75 mm, plus flanges up to 60 mm Minimum internal frame dimension: 175 mm 2 pneumatic hold-down cylinders for clamping profiles 2 eccentric cams for frame positioning 2 swiveling profile support arms Operation via 2 foot valves Nsdpfxoyqxbgj Ahvokw

Condition: used, Year of construction: 2004, saw blade diameter 450 mm cutting diameter 150 mm turning speeds 6 / 12 / 24 / 48 U/min capacity 90 degrees: flat 240 x 70 mm capacity 60 degrees: flat 170 x 70 mm capacity 30 degrees: flat 120 x 70 mm capacity 90 degrees: round 150 mm capacity 60 degrees: round 145 mm capacity 30 degrees: round 120 mm Nkjdpfx Ahjyk E U Hjvew capacity 90 degrees: square 140 x 140 mm capacity 60 degrees: square 125 x 125 mm 100 x 100 mm total power requirement 3,6 kW weight of the machine ca. 1150 kg dimensions 1450 x 1610 x 1900 mm Semi-automatic mitre saw Equipment: - miter 30° / 60° / 90° - digital display - roller conveyor - Hydraulic clamping - Hydraulic saw blade feed

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Nedpfx Ajvbwfnehvekw

Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 P Nkodel Skl Iopfx Ahvow EU shipping approx. €350

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S MATERIAL FEED SPEED ..... MAX. 350 MM/S TENSION FORCE ..... MAIN CLAMP 10500N Njdpfxsquuufe Ahvokw

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, overall weight: 380 kg, Dimensions (W x H x D): 950 x 800 x 1150 mm Weight: 350 kg Operating principle: hydropneumatic Nkedpfoyl R T Dex Ahvjw Operating pressure: pneumatic, 6 to 8 bar Air consumption: 10 liters per stroke Pressing force: 35 kN at 7 bar Air connection: R 1/4" Punching stroke: 20 mm Return stroke: 100 mm Max. punching height: 120 mm Max. profile height: 120 mm

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 0278, Mitre cold circular saw EISELE type VMS-III-S-HYD Type No. 430 Machine. No. 0278 Year of construction 1984 Sawing range at 90°: (round) Ø 120 mm Sawing area at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm. (2 gear stages + 2 motor speeds) Mitre cut 45° to the left, 90° and up to 30°(60°) to the right, infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic material quick clamping device - Infinitely adjustable hydraulic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Convenient and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base - Central lubrication (manually operated) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Nkedpfxet A Arlo Ahvsw Weight 490 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 0783, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg Njdpfx Ahjt A Ar Sevskw The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: excellent (used), Year of construction: 2017, Very well-maintained Behringer VMS 400 A, including infeed and outfeed roller conveyors with Exactstop measuring unit. The machine is expected in stock at the end of February 2026. Nsdoygw E Aopfx Ahvekw

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Nedpfxsw Inudo Ahvjkw Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Year of construction: 2001, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Nodpfx Aheygkn Dovjkw Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, cutting speed: 40 mm/min, overall weight: 4,500 kg, workpiece diameter (max.): 150 mm, control type: PLC-controlled, TECHNICAL DETAILS Max. round material: 150 mm Max. flat material: 135 mm Saw blade feed: 0.5 - 40 mm/min Single compartment load max.: 500 kg at 3 m bar length Total load: 4,000 kg Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min MACHINE DETAILS Control: Siemens - PLC control Dimensions & Weight Required space: 9.3 m x 7.5 m Weight: 4,500 kg Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 bar EQUIPMENT Infeed magazine Cut-off disposal Compartments incl. roller conveyor: 11 pcs Conveyor manufacturer: Geppert Nkedpfjygim Eox Ahvsw

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Nkodpfxou Niuzs Ahvew Without coolant system *

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Nksdpfxoxpd D Ns Ahvsw Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Condition: good (used), Year of construction: 1989, functionality: limited functionality, machine/vehicle number: 8138, type of input current: three-phase, input voltage: 400 V, ❇️ Pressta Eisele AKF – Notching Machine | Excellent Condition | Fully Functional | UVV Safety Inspected For sale is a robust Pressta Eisele AKF notching machine for metal and window fabrication. The machine is in overall excellent, well-maintained, and fully functional condition and was in operation until recently. A valid UVV/safety inspection certificate is available (see sticker/photos). ⚠️ Important Note: On this machine, the pneumatic hoses show signs of material fatigue due to age. ➡️ Recommendation: Replace pneumatic hoses before commissioning (moderate effort required). On-site inspection and functional testing possible at any time. ⸻ ❇️ Machine Details • Manufacturer: Pressta Eisele • Model: AKF Nedpfox Rpfqsx Ahvjkw • Machine No.: 8138 • Year of manufacture: 1989 • Made in W.-Germany • Application: Notching of profiles in metal and window construction ⸻ ❇️ Features & Equipment • Heavy, low-vibration machine body • Powerful motor • Pneumatic feed and clamping functions • Sturdy work table with clamping options • Safety guards included • Foot pedal operation • Maintenance-friendly design ⸻ ❇️ Condition • Mechanics and electrics: fully functional • Well-maintained overall condition • Note: Pneumatic hoses require replacement due to age (see above) ⸻ ❇️ Dimensions • External dimensions (approx.): H 137 cm × W 99 cm × D 97 cm ⸻ ❇️ Terms • Sale on behalf of customer • Invoice with VAT possible • Location: 72229 Rohrdorf • Loading with indoor crane possible on site • Delivery available upon covering costs ⸻ ❇️ Price • Net price: €1,200 + 19% VAT ⸻ If you are interested, please get in touch – viewing and test run available by appointment. ⸻ ⚠️ I also offer additional machines and accessories for window, metal, and workshop operations in my other listings. ‼️ Please check out my other offers – it's worth your while!

Year of construction: 2023, condition: ready for operation (used), An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Nodpfjw D Et Rjx Ahvekw