Used Eisele for sale (122)

Condition: good (used), Year of construction: 1988, Saw blade dimensions: 275 x 3.3 x 40 mm Cutting capacity for straight cuts: Profiles and angles/pipes/solid material: 65 x 130/90/60 mm Ndodpfxozvw Uhs Ahkoa For miter cuts: Flat profiles and angles/pipes: 75 x 90/90 mm 2 saw blade speeds: 2000/4000 rpm Drive motor: 380 V, 1/1.2 kW Space requirement: 750 x 450 x 750 mm Weight:

Condition: good (used), machine/vehicle number: 8195, Operating principle: hydropneumatic Pneumatic operating pressure: 8 bar Nodpfxszwqvzj Ahkoda Air consumption: 40 liters/stroke Pressing force: 32 kN at 8 bar Air connection: R 1/4” Punch stroke: 17 mm Counter-stroke: 140 mm Punching height: Max. 150 mm Profile height: Max. 210 mm Operating manual: Available Dimensions (width x depth x height): 900 x 1180 x 750 mm Weight: 360 kg

Condition: used, heavy-duty saw head with a robust base and material clamp for non-ferrous metals and aluminum, saw blade 350 mm, more powerful motor, Ndsdpfx Ahezwhd Askja with pneumatic feed and 2 pneumatic material clamps.

Condition: used, Year of construction: 1984, machine/vehicle number: 0278, type of input current: three-phase, input voltage: 400 V, Mitre cold circular saw EISELE type VMS-III-S-HYD Type No. 430 Machine. No. 0278 Year of construction 1984 Sawing range at 90°: (round) Ø 120 mm Sawing area at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm. (2 gear stages + 2 motor speeds) Mitre cut 45° to the left, 90° and up to 30°(60°) to the right, infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic material quick clamping device - Infinitely adjustable hydraulic saw blade feed Nedpfxet A Arlj Ahkeda - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Convenient and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base - Central lubrication (manually operated) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 490 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Type: AKF 250L Motor: 400V, 2.2kW Speed: 2800 rpm Arbor diameter: 250mm Arbor shaft diameter: 40mm Cutting width: 300mm Ndjdpfozvz Dysx Ahksa Cutting depth: 85mm Profile height: 160mm Weight: approx. 150kg Dimensions (W x H x D): 950 x 1450 x 930 mm

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 360 kg, Dimensions WxHxD: 900 x 1180 x 750 mm Ndsdpfxozvz Dtj Ahksa Weight: 360 kg Operating principle: hydropneumatic Working pressure (pneumatic): 8 bar Air consumption: 40 liters/stroke at 8 bar Pressing force: 32 kN at 8 bar Air connection: R 1/4" Punch stroke: 17 mm Return stroke: 140 mm Maximum punching height: 150 mm Maximum profile height: 210 mm

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Nsdjx Avtvopfx Ahkeda Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Punching unit, complete with base frame Drive: Hydropneumatic Iebp Icsy Hriwsr Nvoba Maximum punching force: 50 kN at 10 bar Stroke: 40 mm Standard installation height (daylight): 140 mm Maximum installation height: 200 mm Overhang (punch to rear of machine): 110 mm Nsdsy S Abbspfx Ahkjda Table size: 250 × 200 mm Dimensions (W × D × H): 250 × 450 × 630 mm Weight: approx. 67 kg Operating pressure: max. 10 bar

Condition: used, Motor: 3.0 kW Ndsdpfx Ahozkl U Sekea Cutting height: 80 mm Swiveling function, no vice required Location: Nattheim

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Nodpfx Aszutnnshkoda Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds . .

Condition: used, Year of construction: 2007, saw blade diameter 370 mm capacity 90 degrees: flat 200x100 mm capacity 90 degrees: round 130 mm 34/68 UpM total power requirement 2,6 kW height of material-table 900 mm dimensions of the machine ca. 1335x865x2175 m Nsdpfx Ahozr Rqbokeda weight of the machine ca. 430 kg

Year of construction: 2023, condition: ready for operation (used), An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Ndjdpfew D Et Rsx Ahkea

Condition: ready for operation (used), A vertical cold circular saw Behringer Eisele with material support on the left and right is available. Saw blade dimensions X/Y/Z: 350mm/3mm/40mm, speed: 68rpm, max. cutting capacity for flat material X/Y: 170mm/100mm, max. cutting capacity for square material X/Y: 100mm/100mm, max. cutting diameter: 120mm, machine dimensions X/Y/Z: approx. 1050mm/800mm/2200mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Ndodpfxjzklfqo Ahksa

Condition: used, Year of construction: 2017, For processing aluminum and PVC profiles: * Miter cuts possible in 3 planes, also usable as a crosscut saw. * Manual adjustment of the horizontal saw blade, allowing it to be positioned up to 20 mm in front of the vertical blade. * Notching options: right-angled, single-sided bevel, double-sided bevel, triple-sided bevel. * Processing of profiles up to 300 mm wide at 90°, sharp miter cuts up to 30°, profile height 280 mm. Nsdpfx Ahjzrk Rboksda * Notching depth: horizontal up to 185 mm, vertical up to 210 mm at 90°. * Notching width at 90°: 300 mm. * Max. profile height 280 mm. * Swivel range of the saw blade vertically from 30° - 90° - 30° (front/center/rear) manually, positioning via a mechanical digital display. * Swivel range of the saw blade horizontally with the vertical saw blade 30° - 90° - 30°, manually, positioning via a mechanical digital display. * Material stop (tabletop) can be swivelled manually to the left and right from 30° - 90° - 30°, positioning via a scale. * Material depth stop is manually adjustable with a sliding carriage and hand clamp, positioning via a mechanical digital display.

Year of construction: 1996, condition: good (used), machine/vehicle number: 9182, Offer 23168 Technical data: - Notching possibilities + miters in 3 planes - right-angled, one-sided + two-sided + three-sided oblique . - Can be used as a shift cut crosscut saw - Pneumatic profile clamping Machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3,5 x 40 mm positive - horizontal 500 x 3,5 x 40 mm negative - notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. positioning with digital display - Swiveling range saw blade horiz. with vert. saw blade Saw blade - 45° - 90° - 45° mot. positioning with digital displays - Notching height adjustment with digital displays - profile stop shoulder manually tiltable 30° - 90° - 45° - pneumatic coolant check device - air connection 6 bar - drive 400 V / 2 x 3 kW - space requirement approx. W 2400 x H 2000 / D 1400 mm - weight approx. 1200 kg Njdpemb U E Aofx Ahkoda

Condition: good (used), Year of construction: 1980, machine/vehicle number: 2038, Offer 24272 Technical data: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm Ndjdpfx Aot H Ibmehkoa - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9131, Offer 26050 Ndedjyz Tqrepfx Ahkja Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm - Vertical saw blade manually swivellable from 90° - 30° via hand wheel - Usable as a shifting saw without horizontal saw blade - Profile stop shoulder swivellable 30° - 90° - 30° - Pneumatic material clamp - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: - Feed of the milling unit manual - Worktable height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Spray device Ndjdpfx Ahoyz S Troksa - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 250-19, Offer 25283 Technical Specifications: Nedpfx Ahjw Nhumskoda - Saw blade speed, frequency controlled, for very fine cutting - Saw blade diameter: 200 mm - Automatic operation cycle - Pressure stop with SICO counter for setting the glass pressing force - Simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device Nedpfx Ahjtq Takoksda - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 252-19, Offer 25269 Technical specifications: - Saw blade speed, frequency-controlled for ultra-fine cutting - Saw blade diameter: 200 mm - Automatic work cycle - Pressure stop with SICO counter for setting glass contact pressure – simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg Nodpfxow R S Nwj Ahkoda - Machine stand

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Nodpfjw Inudex Ahkjda Max. profile height: 100 mm Weight: approx. 280 kg

Condition: used, Year of construction: 1995, saw blade diameter 350 mm cutting diameter 120 mm Nodpfx Ahjzmy E Doksda capacity 90 degrees: flat 170 x 100 mm capacity 45 degrees: round 120 mm capacity 45 degrees: flat 95 x 100 mm turning speeds 34 / 88 U/min total power requirement 0,75/1,5 kW weight of the machine ca. 340 kg. dimensions of the machine ca. 0,7 x 1,0 x 1,85 m Features: - Coolant system - Replacement saw blades

Condition: used, Year of construction: 1994, The price includes several sets of stamping dies as well as new editions. Ndodozqvbcspfx Ahkoa

Condition: good (used), Year of construction: 1994, Offer 24186 Technical data: - Manual saw blade feed - Workpiece clamping in the machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds: 40 - 80 m/min - Cutting range: at 90° - Round: 110 mm - Rectangular: 82 x 160 mm - Square: 82 x 82 mm - Miter cut: at 45° - Round: 110 mm - Rectangular: 80 x 120 mm - Square: 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW Ndodszqtrfspfx Ahkea - Coolant system - Space requirement: approx. W 600 x H 1600 x D 750 mm - Weight: approx. 300 kg