Used Eisele Vms 2 for sale (126)

Condition: excellent (used), Year of construction: 2004, Description to follow! Isdpfx Aoz Ebqcshyjih

Condition: defective spare-parts repository (used), Year of construction: 1975, functionality: unexamined, machine/vehicle number: 3015, rotational speed (min.): 40 rpm, rotational speed (max.): 80 rpm, input voltage: 380 V, EISELE VMS2-D045 Cold Circular Saw – defective / untested Selling a used EISELE cold circular saw, type VMS2-D045. The machine is explicitly sold as defective or untested. Sale is exclusively as a DIY project, a source of spare parts, or for repair. The saw was taken out of service for safety or age-related reasons. No guarantee on function, accuracy, or operational safety. Iiedpfx Aoy Uq U Ijhysh The EISELE VMS series is considered a robust industrial metal cold circular saw with a solid machine construction and high cutting accuracy. Technical data Manufacturer: EISELE Type: VMS2-D045 Machine type: Metal cold circular saw / Vertical circular saw Semi-automatic version Suitable for steel, stainless steel, and profile materials Pneumatic vise Coolant system available Multiple saw blade speeds High-voltage connection 400 V Pneumatic saw feed Solid cast iron machine construction Key technical data of the VMS series Saw blade diameter, depending on the version, approx. 275–315 mm Cutting range up to approx. 100 mm round material 2 cutting speeds, approx. 40 / 80 rpm Motor power, depending on the version, approx. 1.4–3.6 kW Condition used Sold explicitly as defective untested condition ideal as a source of spare parts or a restoration project no warranty no returns Inspection is highly recommended Loading and transport by the buyer Note Technical specifications according to the nameplate or existing version. Year of manufacture and accessories, see photos. Sale is made excluding any liability for material defects.

Year of construction: 2007, condition: ready for operation (used), Four metalworking machines are offered. 1) Cloos GLC 255 MIG/MAG welding machine, year of manufacture: 2004, dimensions X/Y/Z: approx. 980mm/450mm/700mm, weight: approx. 115kg. 2) Cloos GLC 353 MC3 MIG/MAG pulsed welding machine, year of manufacture: 2007, weight: approx. 160kg. 3) hebö Type II bar twister, year of manufacture: 1979. 4) Eisele VMS II PV-p circular saw, year of manufacture: 1974, weight: approx. 290kg. Inspection by prior arrangement is possible. Iedpfx Ajzp Rhhshysih

Condition: excellent (used), Year of construction: 1966, For sale: a German-made circular saw. Eisele, model vms II, in good condition. Iiedpfx Ahoz Skp Dsyjh

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Iiedpjx Avtvsfx Ahyjh Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Iisdpfez Hpazjx Ahyjh Year of construction 1980 Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm cutting area at 90° round: 90 mm cutting area at 90° square: 75 x 75 mm cutting area in mitre at 45° square: 75 x 75 mm disk rotations: 40/80 upm engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg Iiodpfx Ahem Twgwoyeh

Condition: used, Year of construction: 1986, machine/vehicle number: 0783, type of input current: three-phase, input voltage: 400 V, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. Iiedet A Ar Sopfx Ahysh The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, Year of construction: 1995, Eisele VMS 300 Metal Cold Circular Saw Vertical metal cold circular saw (manual) Eisele Type/Model VMS 300 Condition Used Year of Manufacture 1995 Technical Data Saw blade diameter: Ø 275 mm up to max. 300 mm Saw blade speed: 40 / 80 rpm (2 speeds for steel / stainless steel) Cutting capacity: 90° (round) max. Ø 90 mm (with Ø 300 blade up to 100 mm) Cutting capacity: 90° (square) max. 75 x 75 mm (up to 82 x 82 mm) Cutting capacity: 90° (flat) max. 120 x 75 mm (up to 160 x 82 mm) Cutting capacity: 45° (round) max. Ø 90 mm Cutting capacity: 45° (square) max. 75 x 75 mm Cutting capacity: 45° (flat) max. 80 x 75 mm Motor power: 1.0 / 1.4 kW (pole-changing) Connection voltage: 400 V / 50 Hz Machine weight: approx. 210 to 300 kg (depending on the base) Space requirement (L x W x H): approx. 700 x 750 x 1,600 mm Equipment Iisdpozymc Nsfx Ahyeh - Integrated coolant system - Miter adjustment Inquiry item: Transportation costs in a separate offer.

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: 3229, type of input current: three-phase, rotational speed (min.): 35 rpm, rotational speed (max.): 70 rpm, input voltage: 500 V, For sale is a robust metal circular saw from the manufacturer Eisele, model VMS III. This machine is a classic cold circular saw designed for industrial use and stands out due to its solid construction and durability. Ideal for workshops, metal fabrication, or locksmith operations. Technical data: • Manufacturer: Eisele • Type: VMS III • Year of manufacture: 1971 • Machine number: 3229 • Rotational speeds: 35 / 70 rpm • Voltage: 500 V • Motor power: approx. 1.8 to 2.6 kW • Frequency: 50 Hz • Version: Three-phase current • Equipped with a vise and mechanical feed Ijdpfx Asy Dc I Sshyoih Condition: Used condition, appropriate for its age. The machine is of heavy-duty construction and well-suited for refurbishment or immediate use. Visually with signs of wear.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 5850/3, saw blade diameter: 350 mm, Eisele Circular Saw Machine VMS 350 Isdpfjzm Tivjx Ahysih

Condition: used, Year of construction: 2009, machine/vehicle number: 10000850, Item No. 21166 Hydro-pneumatic metal circular sawing machine Technical data: - Saw blade diameter up to 350 mm - Saw blade feed, continuously adjustable, hydro-pneumatic - Maximum opening width of the pneumatic vise 205 mm - Cutting range: - with saw blade diameter 350 mm - at 90°: - round 120 mm - square 110 mm - flat up to 200 x 90 mm - or 140 x 110 mm - at 45°: - round 100 mm - flat 100 x 100 mm - Miter adjustable: - left up to 45° - right up to 45° - 30° - 4 saw blade speeds 10 + 20 + 40 + 80 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro-spray cooling system Iijdpfx Ahszzpp Ioyjh - Discharge conveyor with stop 4000 mm - Infeed conveyor 2000 mm - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Condition: ready for operation (used), Eisele VMS 350 Saw, Metal Circular Saw, Circular Saw Maximum cutting cross-section, round at 90°: 120 mm Maximum cutting cross-section, rectangular at 90°: 170 x 100 mm Maximum cutting cross-section, round at 45°: 120 mm Maximum cutting cross-section, rectangular at 45°: 120 x 100 mm Saw blade diameter: 350 mm Saw blade width: 3 mm Swiveling: 45-90-45-30° Rotational speed: 17 RPM; 34 RPM You are welcome to visit us for a viewing. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. Ijdjz Il Evspfx Ahyeih For international customers, a net invoice can also be prepared. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized Iijdpfx Ahozi S R Reyoh • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 8811, Corner crimper Pressta Eisele Pressa 2000 Dimensions WxHxD: 900 x 1180 x 750 mm Weight: 360 kg Operating principle: hydropneumatic Iisdpfsz Ib Nkex Ahysh Working pressure (pneumatic): 8 bar Air consumption: 40 liters/stroke at 8 bar Pressing force: 32 kN at 8 bar Punch stroke: 17 mm Return stroke: 140 mm Maximum punching height: 150 mm Maximum profile height: 210 mm We can ship the machine to your address via shipping company DSV

Condition: excellent (used), Year of construction: 1999, O F F E R We can offer you, subject to prior sale and errors excepted, the following ex stock, without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Model: VMS 370 Year of manufacture: 2000 Max. saw blade Ø: 370 mm Cutting capacity: - Pipes approx. up to 130 mm - Flat material: 200 x 100 / 140 x 100 mm - Solid material (square): 120 mm Note: For mitre cuts, cutting capacities may be somewhat reduced—up to max. 140 mm. Saw carriage stroke, manual, vertical approx.: 200 mm Saw blade speeds: 17–34 rpm Saw blade drive approx.: 2/2.6 kW Total drive approx.: 3 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories/Special features: • Adjustable saw head for mitre cuts at 30° / 45° / 90° via scale • Pole-changeable three-phase motor with max. 2.6 kW drive • Manual feed of saw carriage with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant system with chip collection tray • Roller conveyor material feed approx. 2,000 mm • New saw blade installed, 2 spare saw blades included • Electrical system recently overhauled Ideal machine for locksmithing and metalworking shops. Condition: Very good – ready for demonstration – very smooth running Delivery: Ex stock, as inspected Payment: Net, strictly after receipt of invoice We look forward to your order. We also have larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Further saw machines always available—please enquire. Iodpfex A H Rrsx Ahyoih

Condition: used, Year of construction: 2007, saw blade diameter 370 mm capacity 90 degrees: flat 200x100 mm capacity 90 degrees: round 130 mm 34/68 UpM total power requirement 2,6 kW height of material-table 900 mm Ijdpfxjzr Rqbs Ahyjih dimensions of the machine ca. 1335x865x2175 m weight of the machine ca. 430 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 360 kg, Dimensions WxHxD: 900 x 1180 x 750 mm Weight: 360 kg Operating principle: hydropneumatic Working pressure (pneumatic): 8 bar Air consumption: 40 liters/stroke at 8 bar Pressing force: 32 kN at 8 bar Air connection: R 1/4" Punch stroke: 17 mm Return stroke: 140 mm Maximum punching height: 150 mm Isdpfx Aszvz Dtohyjih Maximum profile height: 210 mm

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, saw blade diameter: 120 mm, O F F E R We can offer you the following ex stock, subject to prior sale and errors excepted, without obligation: EISELE Vertical cold circular saw with mitre cut Type VMS II – 350 PV Year of manufacture 2010 _____ Max. saw blade diameter 350 mm Saw blade speeds 40 / 80 rpm Workpiece diameter 90 mm Swivel range of saw table 0 – 90 degrees Continuously adjustable pneumatic feed 0 – 10 (?) Approx. weight 350 kg Iisdpfjyub N Usx Ahyoh Features: • Adjustable workpiece length stop, mounted on the right - Max. adjustable length: 500 mm • Pneumatic workpiece vice – clamping width 160 mm • Minimum quantity coolant system (MMKS) for saw blade • Adjustable depth stop

Condition: ready for operation (used), Eisele VMS 300 Saw, Cold Circular Saw, Circular Saw Cutting range: max. 120 x 75 (straight cut), max. 80 x 75 (45° miter cut) Weight: 185 kg Max. saw blade: Ø 300mm Iiodpjzypw Njfx Ahysh Saw blade speed: 20 / 40 RPM Year of manufacture: 2002 Length stop Measuring device Roller conveyor You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm Iijdpfx Aozinzrjhyoh 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: Iiodpfx Ahjyyz Ebeysh - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: good (used), Year of construction: 1995, EISELE circular saw Iisdpfxjz Imqyo Ahysh Model VME 350

Condition: used, Year of construction: 1995, saw blade diameter 315 mm cutting diameter 100 mm cutting speed 40 / 80 U/min total power requirement 1,2 kW Iijdpfezxt Nmjx Ahysh weight of the machine ca. 0,3 t dimensions of the machine ca. 0,8 x 0,6 x 1,65 m

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, overall weight: 650 kg, pressing force: 20 t, | Technical Data | Value | | Drive | Hydraulic | | Motor Power | 5.5 kW | | Maximum Punching Force | 200 kN (approx. 20 tons) | | Maximum Punching Stroke | 80 mm | Iisdpfxoz Ihn To Ahyoh | Stroke Adjustment | Adjustable via scale | | Stroke Rate | Up to 20 double strokes/min | | Operation | Foot pedal |