Used Edm Drilling Machine for sale (66,277)

Condition: used, Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Iodpszzwahofx Aa Esbb Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T

Condition: used, Workbench Column Drilling Machine FLOTT type 16 STG/R2 Spindle: CM2 Spindle exit: 100 mm Spindle speed: from 80 to 2000 RPM Table size: Length 340 mm x Width 280 mm Maxi distance spindle nose/table (lower table): 400 mm Throat depth: 240 mm 2 speed motor 2,2 kW Drilling/tapping function Adjustment by belt variator Electronic RPM speed not working Voltage: 380 V Width: 500 mm Depth800 mm Total height: 1100 mm Weight: approx 150 kg Ibsdjzzwabjpfx Aa Eob

Condition: used, Year of construction: 1982, Column Drilling Machine GSP type 205 R Spindle: Ø 100 mm Cone CM4 Spindle exit: Ø 300 mm Rotation: from 12 to 1800 RPM Table size: 800 x 400 mm Year of construction: 1982 Isdszzv U Depfx Aa Eobb Maxi distance spindle nose/tablein low position: 700 mm Mini distance spindle nose/table: 250 mm Throat depth: 400 mm Cross-table 1150 x 400 mm Drilling/tapping function Automatic spindle advance The manual descent of the spindle is hard (works perfectly in automatic advance) Manual raising/lowering of the table Voltage: 380 V Width: 1300 mm Depth: 1700 mm Total height: 2700 mm Weight: approx 1,5 T

Condition: good (used), Column Drilling Machine ALZMETALL AB3 ESV Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Automatic Descent Ibedpfx Aaszzv Uwe Esb 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Condition: used, Year of construction: 1997, Workbench Column Drilling Machine CINCINNATI PE 32 Year of construction: 1997 Spindle: CM3 Spindle exit: 150 mm Ibjdpfx Aezzv Udsa Eeb Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Throat depth: 300 mm Spindle sleeve diameter: Ø 80 mm Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg

Condition: ready for operation (used), Fehlmann Picomax 50 drilling machine with threading unit Speed: 125 - 4400 RPM Feed: 0.03 - 0.40 mm Drilling capacity in steel: 22 mm Threading unit Spindle stroke: 120 mm Stroke: 430 mm Accessories: see pictures You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Ibsdpszzvxiefx Aa Ejb Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2021, Used HOMAG Drillteq V-200 - Year of manufacture: 2021 - Immediately available - Excellent condition Ibsdpezdvuvefx Aa Ejb - Tools can be included for an additional charge. Please feel free to contact us if you have any questions.

Condition: new, COLUMN DRILLING MACHINE UNIMAX 3 Comparable to Alzmetall, Flott, etc. Powerful, precise column drilling machine with a wide range of applications. Drill table adjustable via rack and pinion and worm gear, and swiveling around the column. Forward/reverse switch, emergency stop button, digital speed display Infinitely variable spindle speeds Range A: 80 - 1440 rpm Ibsdpfxewkhlio Aa Eob Range B: 180 - 3200 rpm Continuous drilling capacity: 25 mm Nominal drilling capacity: 30 mm Thread cutting capacity: M20 Spindle: MK 3 Drilling depth: 125 mm Throat depth: 260 mm Spindle/table distance: 90 to 840 mm Table surface: 500 x 365 mm Overall height: 1855 mm Weight: 250 kg Incl. drilling package, consisting of: 1 drill chuck arbor MK3 / B16 2 reducing sleeves MK3 / 2, MK3 / 1 1 machine vice MSP 140 1 keyless drill chuck 1 - 16 mm / B16

Condition: good (used), Year of construction: 2005, Length: 2300 mm, unlimited as it is open on the sides. 4 stations for drilling, inserting dowels, and applying adhesive. Equipped with a new adhesive nozzle. Iodpfx Aajzzrdzs Ejbb

Condition: ready for operation (used), - USED - PILLAR-TYPE DRILLING MACHINE POWER SUPPLY: 400V-50Hz MAX DRILLING DIAMETER: 25 mm SPINDLE: CM3 TABLE SIZE: 350 x 350 mm WEIGHT: 250 Kg OVERALL DIMENSIONS: 550 x 850 x 1700 mm NOTE: ROTARY TABLE WITH CLAMP Ibsdozxu Nujpfx Aa Esb

Year of construction: 2001, condition: used, Four CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 3) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 4) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible. Ibsdpfxezzqc Ne Aa Esb

Condition: good (used), Year of construction: 1989, double-sided processing from 280 to 2500 mm the following equipment is available on each side: saw drilling head with 3 drills dowel inserter 3 drilling units from above, at the front 2 drilling units from above, at the rear return transport from below Isdpfozzprpox Aa Eobb

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: SN 018-0212, travel distance X-axis: 4,000 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 140 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, controller model: Penta-Tec, overall weight: 6,000 kg, nominal power (apparent): 12 kVA, number of slots in tool magazine: 10, We are offering this used BAUER Bohrmax Z40 vertical machining center, manufactured in 2018, for sale. Manufacturer: BAUER Model: Bohrmax Z40 Year of manufacture: 2018 SCOPE OF DELIVERY / TECHNICAL DATA: • Spindle speed range: 140-2200 rpm • Drive for X, Y, Z axes: servo motor • Rapid traverse X-axis: 20 m/min • Rapid traverse Y-axis: 6 m/min • Rapid traverse Z-axis: 6 m/min • Distance from top of table to bottom of tool holder: 700 mm • Tool holder: SK40 • Tool changer for 10 tools Iedpezlp T Iofx Aa Eebb • T-slots: M12 • Drilling diameter: 3-32 mm • Thread drilling: M4 - M24 • Tolerance X-axis: ± 0.1 mm • Tolerance Y and Z axes: 0.06 mm • Drive motor for spindle: 7.5 kW • Light curtain at the front • Control: Touchscreen 18” • Chip conveyor with slat conveyor additional integrated equipment: • Automatic tool length measurement • Handheld control unit RCS01 • Software extension for pendulum operation + DXF package • Universally controllable hydraulic clamping system with 8 clamping points (manufacturer Polund - Pro-Clamp Systems) If you have any questions or require further information, please send us a message or call us.

Condition: used, *VILAR LASSEUR VL 315 GRINDER - 1992 - Carbide Tool Sharpening* French VILAR Chatellerault grinder, Type *VL 315* - No. *315.256* - Date: *06/29/92* *Complete equipment:* - Cross table with carriage + swivel table for workpieces - Universal, inclinable tool holder - Long arm for lathe tool holder / carriage tool - Diamond grinding wheel, housing, coolant system - Remote control box, emergency stop button - Articulated lighting lamp - Original green Vilar sheet metal base Ibedpfxszxt Hfo Aa Esb 400V - In working condition, from a precision engineering workshop On a pallet - Approx. 350 kg - Easy to transport Video available upon request.

Condition: used, Year of construction: 1996, machine/vehicle number: 06E3001, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 350 mm, table width: 380 mm, overall weight: 5,000 kg, table length: 980 mm, input voltage: 400 V, Mitsubishi EX30 CNC sinker EDM machine, manufactured in 1996, equipped with a Mitsubishi C11 fuzzy-logic control system (Fi-60e). Large table with a workpiece weight capacity of up to 2,000 kg. The machine has been partially disassembled and is ready for transport; the external unit is on a pallet, including hoses and cables. Technical specifications: - Serial number: 06E3001 - Year of manufacture: 1996 - Control system: Mitsubishi C11 fuzzy logic, Fi-60e - Table dimensions: 980 x 680 mm - Travel X / Y / Z: 700 / 500 / 350 mm - Max. workpiece weight: 2,000 kg - Construction: column with work tank - Cooling: Kouwa GK-50-LFV-DI (R407C) plus external chiller - Connection: 400 V - Machine weight: approx. 5,000 kg Included: documentation, external unit on a pallet, various hoses and cables. Ibedozzmqcspfx Aa Eob The machine is sold in its current condition (used, from a bankruptcy, Apeldoorn, Netherlands). Disassembly, loading, and transport are the responsibility of the buyer; the buyer is responsible for providing tools, lifting/loading equipment, and packaging. Inspection is possible by appointment.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Equipment: CE marking, Through-feed drilling machine, CNC controlled, with drilling heads on the right, left, 4 above, and 7 below. Iedpfxsy U H R Eo Aa Ejbb

Condition: good (used), Year of construction: 1998, functionality: fully functional, Weeke through-feed drilling machine BST 500, with drilling heads on the right and left sides, 5 units underneath, none above. 5 drilling machines in stock, sold individually. Ibjdpezb El Hefx Aa Eeb

Condition: excellent (used), Year of construction: 2014, feed length X-axis: 300 mm, feed length Y-axis: 300 mm, feed length Z-axis: 500 mm, General Aspects MAIN MOVEMENTS Maximum drilling depth - Z-axis: 500 mm Table, longitudinal movement - X-axis: 300 mm Table, vertical movement - Y-axis: 300 mm Drilling slide, piece support - W-axis: 50 mm DRILLING SPINDLE Drilling diameter without pre-drill, optimal: 3 – 12 mm Distance between the bits: 250 mm Drilling spindle, rotation speed min - max: 0 - 6.000 rpm Drilling spindle motor power: 7.5 kW (S1) Cannon drill holder, for diameters less than 6 mm: Ø 10 x 40 mm Cannon drill holder, for diameters greater than 6 mm: Ø 25 x 70 mm CLAMPING TABLE Fixed clamping table, surface dimensions: 500 x 600 mm Maximum load capacity of the fixed table: 1.000 kg Standard type clamping slots: 18 mm OIL Ibjdpfxeu Au Duo Aa Eeb Cutting oil flow rate: 50 lt./min Cutting oil pressure: 90 bar Hydraulic pump motor power: 7.5 kW Hydraulic pump motor capacity: 600 lt Adjustable temperature: 27°-30°C DIMENSIONS AND WEIGHTS Width x length: 4.450 x 3.000 mm Approximate weight: 2.210 Kg POWER SUPPLY Electrical power supply: 400 V/3-phase/50-60 Hz Compressed air: 6 bar Total installed power: 25 kW

Condition: excellent (used), MECOF AGILE CS 500 TNC 640 Boring Mill in technically flawless condition Technical Data: - Spindle taper: ISO 50 - Longitudinal travel: 6000 mm - Cross travel: 1250 mm - Vertical travel: 1700 mm Ibodpfx Aey Rzklea Eob - Table size: 7300×1090 + (2 CUBI 1520×1000) mm - Spindle speed: 4000 rpm - CNC model: fidia CXR - Tool changer capacity: PICK UP UTENSILI 10 POSITIONS (5 ISO 50 – 5 HSK 50 E) - Power: 30 kW spindle The MECOF AGILE CS 500 TNC 640 offers a wide range of features and technical specifications to meet the most diverse requirements. With a longitudinal travel of 6000 mm and a cross travel of 1250 mm, it enables precise drilling and milling operations on large workpieces. The 1700 mm vertical travel ensures maximum flexibility and allows for machining at various angles. The table has a size of 7300×1090 mm and is supplemented by two additional cubes measuring 1520×1000 mm each. In this case, the machine has been installed at floor level. The boring mill is equipped with a powerful 30 kW spindle motor with a maximum spindle speed of 4000 rpm. The fidia CXR CNC control provides precise programming and easy operation. The tool changer with 10 positions (5 ISO 50 – 5 HSK 50 E) allows for fast tool changes to optimize your production process. The machine has been regularly serviced and is in technically excellent condition. It can be inspected under power or during ongoing production. Extensive accessories included. Additional pictures available. Dismantling, removal, shipping, and reinstallation can be organized upon request.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, power: 4 kW (5.44 HP), tool diameter: 50 mm, spindle mount: MK 5, height adjustment type: electric, rotational speed (max.): 2,500 rpm, rotational speed (min.): 28 rpm, total width: 1,145 mm, total length: 3,100 mm, total height: 3,390 mm, table width: 986 mm, table length: 1,820 mm, overall weight: 4,200 kg, Equipment: documentation/manual, Morse 5 taper in the spindle, max. drilling capacity in steel Ø 50 mm, arm length 1250 mm, base clamping surface 1820 x 986 mm, max. Ø boring capacity in steel – without guide: 120 mm, with guide: 200 mm, spindle stroke: 310 mm, vertical arm travel 750 mm, spindle speed: 16 steps, range: 28-2500 rpm, feed rate 0.05 - 2 mm/min, 16 steps, spindle motor power at 1430 rpm: 4 kW, total power consumption 6 kVA, machine dimensions L x W x H: 3100 x 1145 x 3390 mm, machine weight 4200 kg, the machine can be fully tested in our warehouse in Přerov upon agreement. Isdpfx Ajzzfbaea Eobb

Condition: excellent (used), Catalogue number: 7859 ADVANTAGES – 8 spindles – with oscillation – variable spindle spacing (adjustable) – 2 work tables – unpainted – used drilling machine, in very good condition TECHNICAL DATA Drilling spindles: 2x4 pcs Oscillation range left/right: 40mm per side Oscillation speed adjustment on inverter Spindle head adjustment: up/down Each pair of spindles (2 pcs) adjustable: left/right 2 rotation speed options + left/right Max tool diameter: 15mm Table adjustment: up/down Table dimensions: 700x200mm 4 hydraulic cylinders Ibodpfjzxg A Tox Aa Eeb Motor power: 2x 2kW Oscillation motor: 0.75kW Dimensions (L/W/H): 1800x1350x1300mm Weight: 862kg Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Ijdpfx Aovvi I Roa Esbb

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Ibodpevvi Auofx Aa Eeb Storage location: Nattheim

Condition: like new (used), Year of construction: 1999, functionality: fully functional, power: 4 kW (5.44 HP), tool diameter: 50 mm, spindle mount: MK 5, height adjustment type: electric, rotational speed (max.): 2,500 rpm, rotational speed (min.): 28 rpm, total width: 1,120 mm, total length: 3,100 mm, total height: 3,396 mm, table width: 396 mm, table length: 1,820 mm, overall weight: 4,300 kg, year of last overhaul: 2026, Equipment: CE marking, cooling unit, documentation/manual, “CE” version, after undergoing a comprehensive overhaul including a new paint job in 2026, with functioning cooling system, complete with all documentation, fully operational. Option for testing available in the town of Dobříš, Czech Republic. Ibedpfx Aajzy Sams Eob

Condition: used, Column Drilling Machine PRECIS Ø 23 mm Cone: CM2 Maxi diameter: Ø 23 mm Rotation: from 165 to 4400 RPM Table size: 390 x 190 mm Spindle travel: 100 mm Column diameter: Ø 120 mm Throat depth: 240 mm 2 speed motor Ijdpfozy Rwdjx Aa Eebb Mini chuck/table height: 100 mm Maxi chuck/table height: 350 mm Manual descent Manual hydraulic lifting of the table Voltage: 380 V Width: 700 mm Depth: 1000 mm Total height: 1800 mm Weight: approx 800 kg