Used Edm Drilling Machine for sale (66,348)

Condition: used, machine/vehicle number: 007202, Max. panel width: 2500 mm Gkedpfou Rv Ukjx Ak Ueb Max. panel length: 1000 mm No of Bottom Units: 3

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm Godpfx Akeprfbus Ujkb bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3200 U/min thread M16 ST60 column diameter 98 mm engine output 1,1 kW dimensions 800 x 500 x 2000 mm weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: excellent (used), Year of construction: 2002, Contouring control : Heidenhain TNC 310 Accessories available Working range X-way 500 mm Y-way 400 mm Z-way 400 mm Main drive Speed continuously programmable 20 - 4'500 rpm. tool holder SK 40 Work table Gkjdpfjp H S Uxsx Ak Ujb Drive B/C-axis Manual Clamping surface ø 700 x 500 mm Groove distance/size 63/14H7 mm Rotation range 360 Swivel range + 95 / - 10 Dimensions Length 1800 (750 control) mm depth 1800 mm Machine weight 2600 kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, Gear-driven drill press, no belt changes required Very quiet and smooth operation - Drilling capacity in steel ST 60: 30 mm - Drill spindle mount: MK 3 - Drill spindle stroke: 160 mm - 9 drill spindle speeds: 90 - 1450 rpm - Overhang: 300 mm - Table with 2 T-slots - Table dimensions, swiveling: 500 x 450 mm - Table dimensions, base plate: 350 x 400 mm - Distance from base plate to spindle nose: 1100 mm Gkedpfxszuxxfj Ak Ujb - Max. distance table - drill spindle: 660 mm - Height adjustable via rack and pinion with hand crank - Column diameter: 120 mm - Drive: 380 V / 1.2 kW - Space requirement: approx. W 600 x H 2100 x D 670 mm - Weight: approx. 350 kg - Includes drill chuck

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 690189, overall weight: 386 kg, total width: 1,150 mm, pressure: 6 bar, operating pressure: 6 bar, number of spindles: 35, type of input current: three-phase, Condition as shown in the pictures. Godpfx Ajzyr Epjk Uskb

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Gkodpfx Akovylh Uj Ujb Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: used, Year of construction: 1980, machine/vehicle number: 18798, Item No. 25046 High-performance pillar drill Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling capacity in steel ST 60: 32 mm - Drill spindle mount: MK 3 long spindle - Drill spindle stroke: 180 mm - Continuously variable drill spindle speeds - Adjustable – Stage 1: 65 – 240 rpm - 130 – 480 rpm - Stage 2: 240 – 875 rpm - 480 – 1750 rpm - Overhang: 290 mm - Max. distance table – drill spindle: 620 mm - Table with 2 T-slots: 450 x 450 mm - Table with reversible function and permanently mounted machine vise - Table height adjustment via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement: approx. W 660 x H 1900 x D 700 mm - Weight: approx. 300 kg - Includes: Gkodpfxszxdhaj Ak Ueb - Quick-change drill chuck 1-13 mm

Condition: used, machine/vehicle number: 007869, Max. panel width: 3200 mm Max. panel length: 800 mm No of Bottom Units: 5 Lateral horizontal groups: yes Gsdpfowimzyex Ak Uekb

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, total length: 1,300 mm, total height: 2,000 mm, table width: 255 mm, input voltage: 400 V, total width: 1,350 mm, table length: 800 mm, drilling capacity: 40 mm, Equipment: documentation/manual, SERRMAC TCS 40 TC VR DA Drilling and Milling Machine Square column and prismatic guides. Complete with: Automatic feed. Variable speed with delay. Lubrication system. Motorized rapid vertical feed for cross slide table. Vise. Drilling capacity in steel: 40 mm diameter. CM 4 spindle connection. Spindle stroke: 145 mm. Cross slide table: 800 x 255 mm. Variable speed with delay: 64-2350 rpm. Motor power: 2.2 kW. Power supply: Three-phase, 400 V. Weight: 780 kg. Gsdpfx Akezkkm Ho Uekb

Condition: new, COLUMN DRILLING MACHINE UNIMAX 3 Comparable to Alzmetall, Flott, etc. Powerful, precise column drilling machine with a wide range of applications. Drill table adjustable via rack and pinion and worm gear, and swiveling around the column. Forward/reverse switch, emergency stop button, digital speed display Infinitely variable spindle speeds Range A: 80 - 1440 rpm Range B: 180 - 3200 rpm Continuous drilling capacity: 25 mm Nominal drilling capacity: 30 mm Thread cutting capacity: M20 Spindle: MK 3 Drilling depth: 125 mm Throat depth: 260 mm Spindle/table distance: 90 to 840 mm Table surface: 500 x 365 mm Overall height: 1855 mm Gkedpswkhliofx Ak Ujb Weight: 250 kg Incl. drilling package, consisting of: 1 drill chuck arbor MK3 / B16 2 reducing sleeves MK3 / 2, MK3 / 1 1 machine vice MSP 140 1 keyless drill chuck 1 - 16 mm / B16

Condition: used, Vertical drilling machine with 2 spindles, tested, working. 2-pindle vertical drilling machine, tested, working. Gkedjzxg Ayspfx Ak Uob

Condition: new, Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting capacity: M 12 Spindle: MK 3 Gkjdpfsd R Acbsx Ak Usb Drilling depth: 135 mm Spindle speeds, continuously variable: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Power supply: 400 Volt, 50 Hz Features: - Thread cutting device - Digital display for speed, standard - Coolant system - LED machine light - Continuously variable speed control - 24 V electrical system - Base plate with T-slots - Drilling table adjustable via rack and pinion and pivotable around the column - Emergency stop button - Full motor protection - Star handle - CE compliant

Condition: used, Column Drilling Machine PRECIS Ø 23 mm Cone: CM2 Gjdozy Rwdepfx Ak Uokb Maxi diameter: Ø 23 mm Rotation: from 165 to 4400 RPM Table size: 390 x 190 mm Spindle travel: 100 mm Column diameter: Ø 120 mm Throat depth: 240 mm 2 speed motor Mini chuck/table height: 100 mm Maxi chuck/table height: 350 mm Manual descent Manual hydraulic lifting of the table Voltage: 380 V Width: 700 mm Depth: 1000 mm Total height: 1800 mm Weight: approx 800 kg

Condition: good (used), Year of construction: 2006, Boring power 35.0 / 40.0 mm bore capacity in cast iron 50.0 mm threading M 30 bore stroke 150 mm Size of table plate 730 x 210 mm Center of spindle to wall or column 280 mm Speed 80.0 - 1.400 U/min distance spindle /table 85 - 755 mm spindle taper MT 4 MK column diameter 120 mm feed 0.1 / 0.2 / 0.3 mm/U voltage 400 V Motor output 1.3 / 2.3 KW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 2020 mm Original price, including accessories: approx. 20.000 euros Gedjzl E Ubjpfx Ak Uekb Special price available upon request Features: - Heavy-duty, versatile column drill press - Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots - Automatic spindle feed - Fixed drilling depth stop - Stepless speed adjustment - Pole-changing motor - Thread-cutting device - Quick-release drill chuck with tapered shank - User manual (PDF)

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Godpfxey Nd T Ho Ak Uokb Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: used, Year of construction: 1988, Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of manufacture: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Thread cutting (steel/cast iron): M25 / M38 Overhang (column to spindle center): 330 – 1,230 mm Spindle stock travel: 880 mm Gjdpfxeznvibe Ak Uekb Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 steps (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Outrigger height adjustment: 620 mm 9926ä

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Sinker EDM machine – in excellent technical and visual condition The machine has undergone a comprehensive and professional overhaul at our facility and is in very good technical and visual condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check were performed using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good visual condition. The generator and control system were cleaned and technically inspected. The generator's air conditioning unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is ready for immediate use and is ideally suited for reliable production operation. Technical data: Ingersoll (OPS Ingersoll) Sinker EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Gsdpfx Aeyrqpfok Uokb Powertec Handheld - multifunctional handheld control unit Manual erosion with Powertec Handheld High Speed Jump max. 18 m/min Generator power 60 Amperes, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer: 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 1

Condition: used, machine/vehicle number: 006157, Max. panel width: 1000 mm Gkjdpfjy Nkyaex Ak Ujb Max. panel length: 2500 mm No of Bottom Units: 5 No of Top Units: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water Gksdpfezlbrvex Ak Usb - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U T-slots 2 x 14 x 224 mm distance spindle /table 117 / 701 mm engine output 1.45 / 1.90 kW weight 285 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable Gksdpfx Akexab Rhs Usb - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black including special accessories: - 25. Coolant system B.

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Gedoxnlflepfx Ak Uskb

Condition: used, Year of construction: 1996, machine/vehicle number: 06E3001, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 350 mm, table width: 380 mm, overall weight: 5,000 kg, table length: 980 mm, input voltage: 400 V, Mitsubishi EX30 CNC sinker EDM machine, manufactured in 1996, equipped with a Mitsubishi C11 fuzzy-logic control system (Fi-60e). Large table with a workpiece weight capacity of up to 2,000 kg. The machine has been partially disassembled and is ready for transport; the external unit is on a pallet, including hoses and cables. Gkodpfozzmqcex Ak Ujb Technical specifications: - Serial number: 06E3001 - Year of manufacture: 1996 - Control system: Mitsubishi C11 fuzzy logic, Fi-60e - Table dimensions: 980 x 680 mm - Travel X / Y / Z: 700 / 500 / 350 mm - Max. workpiece weight: 2,000 kg - Construction: column with work tank - Cooling: Kouwa GK-50-LFV-DI (R407C) plus external chiller - Connection: 400 V - Machine weight: approx. 5,000 kg Included: documentation, external unit on a pallet, various hoses and cables. The machine is sold in its current condition (used, from a bankruptcy, Apeldoorn, Netherlands). Disassembly, loading, and transport are the responsibility of the buyer; the buyer is responsible for providing tools, lifting/loading equipment, and packaging. Inspection is possible by appointment.

Condition: new, bore capacity in steel (diameter) 30.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 515 x 360 mm turning speeds 225 - 4300 U/min column diameter 115 mm distance spindle /table 132 / 724 mm engine output 1.0 / 1.6 kW weight 260 kg Machine height 1790 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise Gedsxaap Ajpfx Ak Uekb rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm thread M 24 ST60 thread M 30 GG20 feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm engine output 1.0 / 1.6 kW weight 270 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable Gsdpfx Aoxab Nwsk Uskb - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Condition: new, bore capacity in steel (diameter) 40.0 mm threading 30 M workpiece height max. 380 - 785 mm arm length 985 mm spindle taper 4 MK boring head swiweling right/left -80 / +80 Grad table surface area 1210 x 520 mm turning speeds 50 - 2000 U/min column diameter 220 mm column diameter 220 mm table surface area 1210 x 510 mm quill stroke 200 mm feed range - spindle 0.08 - 0.50 mm/U Gkedpfx Akoxaadye Usb total power requirement 2.2 kW weight of the machine ca. 2800 kg dimensions of the machine ca. 2450 x 1200 x 2720 mm characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover