Used Amazone Ug 4500 Nova for sale (20)

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Stroke rate 8 - 13 min. Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Nwjlhcdwevkw Dvozod Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an Automated Cell Culture Analyzer that measures up to 15 key cell culture attributes. By combining up to five separate instruments into one user-friendly instrument, BioProfile FLEX simplifies workflow and saves time, labor and operating costs compared to multiple instruments. Nelhcdeq Tp Tdjwzswd The FLEX autosampler takes samples from its two fermenters and transmits them to the measuring unit of the FLEX analyzer. The data obtained from the FLEX autosampler was compared with data taken manually from the reactor and statistically analyzed. Specifications Sample analysis time: 2.5 minutes (gases only - PO 2 + PCO 2 ), 4.0 minutes (chemistry/gas and osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15-30 °C (59-86 °F), relative operating temperature humidity range: 20-85 % Sample size: 1 ml (for all modules) Sampling options: Single via syringe/beaker Automated batch with sample tray with 20 positions Online, automated from up to ten bioreactors Electrical requirements: 90-264 VAC , 50 to 60 Hz (universal power supply) System size: Height: 20 inches (50 cm) Width: 26 inches (66 cm) Depth: 20 inches (50 cm) System weight: Analyzer: 94 lbs (42.6 kg) without reagents Selection options in the modular test menu Chemistry/Gases Cell Density/Livability Osmolality IgG System integration options Online autosampler Sample collection system OPC connectivity Further articles - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2009, Condition: ready for operation (used), Volume flow: 300m³/h, max. rotational speed: 2920/min, motor power: 0.42kW, length: 2850mm, width: 880mm, height: 1100mm, an inspection is possible. Nwolhcdwsq Sxh Aozjd

Condition: good (used), Year of construction: 1995, machine/vehicle number: 1905239505, Dia 10 - 65 x 50 mm Njlheu U Dmmscdwzowd

Condition: good (used), Year of construction: 2006, machine/vehicle number: 1912-06, Offer 24821 Fine dust filter system for flame cutting system - Plasma cutting system Technical data: - Dust extraction system consisting of filter modules + radial fan - Fine dust filter with 15 cartridges - Cartridge filter with pneumatic cleaning - Volume flow approx. 4000 m³/h - Compressed air connection 6 - 7 bar Nolhcdwovgbyaozowd - Power connection 400 V 5.5 kW - Dust collection tray - Space requirement approx. W 1500 x D 2000 x H 2750 mm - Weight approx. 900 kg

Condition: used, Year of construction: 2004, Applicable material: Food Power: 1 kW (1 HP) Njlhcevly Tcsdwzewd

Year of construction: 2021, Condition: new, 1 set of table shear blades for one motorized guillotine shear Make: LAMI NOVA Model: MS 3003 cutting length 3050 mm cutting thickness 3 mm Delivery time: immediately, subject to prior sale options: Nolhcdjddzg Njwzewd Further spare parts on request Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), power: 75 kW (101.97 HP), Pellet press 75 kW: 800 kg/h Overhauled by the Nova Pellet factory - main bearing for DIE replaced - cost: €13,000 Njlhcdovg A Huswzswd Original electrical cabinet, Siemens PLC control Additional spare parts: Die and rollers

Year of construction: 2012, Condition: ready for operation (used), Volume flow: 1000m³/h, max. rotational speed: 3000/min, motor power: 0.45kW, length: 6050mm, width: 920mm, height: 1370mm, an inspection is possible. Nwolhcdwsq Sxhxjzod

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 1985000101, Dia 11 - 35 x 30 mm Nwolhcdju U Dxvjwzed with STAEUBLI robot-part-handling and INA feeding system

Year of construction: 2016, Condition: used, Flow meter, vibration measurement, pressure sensor -Nova V: Volume flow transducer -similar to Premasgard: 1161 SS Regeltechnik -Voltage: 24 V AC/DC -Price: per piece -Number: 2 pieces Nslhsfifldscdwzewd -Dimensions: 70/70/H130 mm -Weight: 0.3 kg/piece

Condition: as good as new (ex-display), Year of construction: 2010, Functionality: fully functional, LAMI NOVA RETROFITE COMPLETE 3000 x15 HYDRAULICSHEARS NEW CYBELEC 8W CONTROL 2° FIXED CUTTING ANGLE with reverse movement cylinders attached to bottom of frame MACHINE AS NEW Nelhcdeuzy E Ijwzswd VISIBLE IN OPERATION

Condition: new, Pressure capacity 40 t Folding length 1270 mm Clearance between the uprights 980 mm Nwjlhcdsgiud Hewzod Projection 200 mm Installation height 320 mm Stroke 100 mm Working speed 10 mm/s Drive power 4 kW Dimensions L x W x H approx. 1950 x 1450 x 2100 mm Weight approx. 3200 kg Accessories / special features: - Manual operation for the motorized plunge depth and the backgauge o Ball screw spindles o Fine adjustment via handwheel - Top tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 50 x 50 mm with several V-openings - Back gauge with ball screws, length = 600 mm - Only one working speed 10 mm/s for all vertical movements, therefore no light barrier is required! - Front support arms - Suspended control panel - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Operating instructions - CE-compliant Delivery time: approx. 2-3 months after receipt of order plus pre-freight costs China - Germany Exclusive representation! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, 1 brand-new hydraulic press brake with 2-axis NC positioning control, make ELGO P 40 Make: LAMI NOVA, Origin China Model: P 2600 Exclusive representation! Technical data: Pressure capacity 100 t Folding length 2600 mm Clearance between the uprights 2050 mm Projection 320 mm Installation height 405 mm Stroke 140 mm Feed speed 60 mm/s Working speed 7.5 mm/s Retraction speed 55 mm/s Drive power 7.5 kW Dimensions L x W x H 3050 x 1650 x 2520 mm Weight 6200 kg Accessories / special features: - 2-axis NC positioning control, make ELGO P 40 for motorized plunge depth and backgauge plunging depth and the back gauge - PM 1 upper tool, consisting of 3 x 835 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° Njlor Hby Hehcdwzswd - Universal die 60 x 60 mm with several V-openings - Back gauge with ball screws, length approx. 600 mm - Front support arms - Foot pedal with EMERGENCY STOP - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electrical system SCHNEIDER - Operating instructions - CE-compliant Delivery time: approx. 8-10 weeks, after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: new, 1 brand-new hydraulic press brake with 2-axis NC positioning control, make ELGO P 40 Make: LAMI NOVA, Origin China Model: P 2100 Exclusive representation! Technical data: Pressure capacity 100 t Folding length 2000 mm Clearance between the uprights 1550 mm Projection 320 mm Installation height 405 mm Stroke 140 mm Feed speed 60 mm/s Working speed 7.5 mm/s Retraction speed 55 mm/s Drive power 7.5 kW Dimensions L x W x H 2650 x 1650 x 2520 mm Weight 5500 kg Nelhcdwor Hbx Njzswd Accessories / Special features: - 2-axis NC positioning control, make ELGO P 40 for motorized plunge depth and backgauge plunge depth and back gauge - PM 1 upper tool, consisting of 2 x 835 mm and 1 x 435 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 60 x 60 mm with several V-openings - Back gauge with ball screws, length approx. 600 mm - Front support arms - Foot pedal with EMERGENCY STOP - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electrical system SCHNEIDER - Operating instructions - CE-compliant Delivery time: approx. 8-10 weeks, after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: new, Pressure capacity 300 t Folding length 4000 mm Clearance between the uprights 3250 mm throat 400 mm Installation height 590 mm Stroke 220 mm Emptying speed 80 mm / s Working speed 8 mm / s Retraction speed 80 mm / s Nolegiudxohcdwzowd Drive power 22 kW Dimensions L x W x H approx. 4150 x 1850 x 3100 mm Weight approx. 20,000 kg Accessories / Special features: - CNC control Cybelec Cybtouch 12 P for Y1, Y2 , X + automatic crowning o Simple operation, more efficient bending and powerful functions o Touchscreen display with illuminated colors - 5 x 800 mm upper tool PM 1, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 95 x 95 mm with several V-openings - FISSLER laser barrier on the right and left of the front side panels - Automatic hydraulic crowning device in the lower beam - Back gauge with linear guides - 3 front support arms - Foot pedal - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Operating instructions - CE-compliant Delivery time: approx. 2-3 months after receipt of order plus pre-freight costs China - Germany Exclusive representation! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, max. cutting length 4000 mm max. sheet thickness, for mild steel 12 mm Nwjlhcogiud Uedwzod max. sheet thickness, for VA 8 mm Cutting angle 1.5° throat 350 mm Cuts 12 / min. Drive power 18.5 kW Dimensions without support arms and rear guard L x W x H approx. 4765 x 2000 x 2370 mm Weight approx. 13,300 kg Accessories / Special features: - ELGO P 40 electronic positioning indicator for the motorized back gauge o Length approx. 800 mm o Ball screw spindles - 1 heavy angle fence with tilting cams, 1000 mm - 2 heavy-duty support arms - Large throat depth of 350 mm for cutting longer metal sheets - Central cutting gap adjustment - Cutting line lighting - Flat fixed cutting angle of 1.5° - Ball rollers in the table - Upper blade with 2 and lower blade with 4 cutting edges - Plastic feet for the hold-down device - Electric foot switch - Sheet metal chute at the rear - Oil filling - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electrics SCHNEIDER, SIEMENS, TELEMECANIQUE - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Operating instructions - CE-compliant Delivery time: approx. 2-3 months after receipt of order plus pre-freight costs China - Germany Exclusive representation! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, max. cutting length 3100 mm max. sheet thickness, for mild steel 6 mm max. sheet thickness, for VA 4 mm Cutting angle 1.5° throat 350 mm Cuts 14 / min. Drive power 7.5 kW Dimensions L x W x H approx. 3840 x 2000 x 1600 mm Weight approx. 5500 kg Accessories / special features: - NC control ELGO P 40 as electronic positioning display for the motorized backgauge, length = approx. 800 mm, ball screws - 1 heavy angle fence with tilting cams, 1000 mm - 2 heavy-duty support arms - Large projection of 350 mm for cutting off longer metal sheets - Central cutting gap adjustment - Cutting line lighting - Flat fixed cutting angle of 1.5° - Ball rollers in the table - Upper blade with 2 and lower blade with 4 cutting edges - Plastic feet for the hold-down device - Electric foot switch - Sheet metal chute at the rear - Oil filling - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electric SIEMENS, TELEMECANIQUE - Operating instructions - CE-compliant Fig.: with option! Delivery time: approx. 8-10 weeks after receipt of order plus pre-freight costs China - Germany Exclusive representation! Njlhcdwod Ad A Ujzowd Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, 1 brand-new hydraulic swing-cut guillotine shear (unused exhibition machine) Make: LAMI NOVA / Model: SC 2006 max. cutting length 2100 mm max. sheet thickness, for mild steel 6.5 mm max. sheet thickness, for VA 4 mm Cutting angle 1.5° throat 350 mm Cuts 29 / min. Drive power 7.5 kW Dimensions L x W x H approx. 2670 x 2000 x 1600 mm Weight 4500 kg Accessories / Special features: - NC control ELGO P 40 as electronic positioning display for the motorized backgauge, length = approx. 800 mm, ball screws Njlhcod Ad A Eedwzowd - 1 heavy angle fence with tilting cams, 1000 mm - 2 heavy-duty support arms - Large projection of 350 mm for cutting off longer metal sheets - Central cutting gap adjustment - Cutting line lighting - Flat fixed cutting angle of 1.5° - Ball rollers in the table - Upper blade with 2 and lower blade with 4 cutting edges - Plastic feet for the hold-down device - Electric foot switch - Sheet metal chute at the rear - Oil filling - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electric SIEMENS, TELEMECANIQUE - Operating instructions - CE-compliant Delivery time: immediately, subject to prior sale plus pre-freight costs China - Germany Exclusive representation! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, 1 brand-new hydraulic swing-cut guillotine shears Make: LAMI NOVA / Exclusive agency! Model: SC 4006 max. cutting length 4100 mm max. sheet thickness, for mild steel 6 mm max. sheet thickness, for VA 4 mm Cutting angle 1.5° throat 350 mm Cuts 14 / min. Drive power 7.5 kW Dimensions L x W x H approx. 4630 x 2050 x 1700 mm Weight 9600 kg Accessories / Special features: - NC control ELGO P 40 as electronic positioning display for the motorized backgauge, length = approx. 800 mm, ball screws Nwslhcdsd Ad Dbewzsd - 1 heavy angle fence with tilting cams, 1000 mm - 2 heavy-duty support arms - Large projection of 350 mm for cutting off longer metal sheets - Central cutting gap adjustment - Cutting line lighting - Flat fixed cutting angle of 1.5° - Ball rollers in the table - Upper blade with 2 and lower blade with 4 cutting edges - Plastic feet for the hold-down device - Electric foot switch - Sheet metal chute at the rear - Oil filling - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electric SIEMENS, TELEMECANIQUE - Operating instructions - CE-compliant Fig.: with option! Delivery time: approx. 3 months after receipt of order plus pre-freight costs China - Germany Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel